Dear Mailing List. I tried with different variations of Stupid Mode and ATX3 - no result. And I didn't load ungrab-winmodem and snd-intel8x0m. [Dialer Defaults] Init1 = ATZ Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 +MS=34 Modem Type = Analog Modem Baud = 460800 New PPPD = yes Modem = /dev/ttySL0 ISDN = 0 Phone = 087305656 Password = mypassword Username = username #Init3 = ATX3 Carrier Check = no # Stupid Mode = on In 3rd console nothing happens at all.: ezhik@ubuntu-laptop:~$ sudo tail -f /var/log/messages [sudo] password for ezhik: Jun 14 00:09:51 ubuntu-laptop kernel: [ 12.630938] ADDRCONF(NETDEV_UP): wlan0: link is not ready Jun 14 00:09:51 ubuntu-laptop kernel: [ 12.639109] eth0: link down Jun 14 00:09:51 ubuntu-laptop kernel: [ 12.639341] ADDRCONF(NETDEV_UP): eth0: link is not ready Jun 14 00:09:52 ubuntu-laptop kernel: [ 13.448658] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. Jun 14 00:09:52 ubuntu-laptop kernel: [ 13.692326] ppdev: user-space parallel port driver Jun 14 00:15:03 ubuntu-laptop kernel: [ 324.424335] ath5k 0000:04:00.0: PCI INT A disabled Jun 14 00:15:03 ubuntu-laptop kernel: [ 324.500796] sdhci-pci 0000:01:01.1: PCI INT C disabled Jun 14 00:15:03 ubuntu-laptop kernel: [ 324.646665] usbcore: deregistering interface driver usbhid Jun 14 00:15:03 ubuntu-laptop kernel: [ 324.655091] usbcore: deregistering interface driver hiddev Jun 14 00:15:03 ubuntu-laptop kernel: [ 324.928083] 8139too 0000:01:07.0: PCI INT A disabled It seems to be result of unloading script. My ISP is Kiwi online (http://www.kol.co.nz/), but they do not provide much technical information on their site. What do I have to ask them, if I will call them? They do not provide technical support for Linux. I run Microsoft Windows XP on the same machine to access Internet, and dial-up works fine. I can send you output of successful connection under windows. Will it help? Here is my wvdial.out. Usually wvdial waits nearly a minute, before it reports No Carrier. --> WvDial: Internet dialer version 1.60 --> Cannot get information for serial port. --> Initializing modem. --> Sending: ATZ ATZ OK --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 +MS=34 ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 +MS=34 OK --> Modem initialized. --> Sending: ATDT087305656 --> Waiting for carrier. ATDT087305656 NO CARRIER --> No Carrier! Trying again. --> Sending: ATDT087305656 --> Waiting for carrier. ATDT087305656 NO CARRIER --> No Carrier! Trying again. --> Sending: ATDT087305656 --> Waiting for carrier. ATDT087305656 Thanks, Maksym
