Yasser, scanModem reports that you have an 11c11040 agrsm modem supported by indicated drivers 11c11040 (on HDA audio cards) 2.6.31 agrsm-11c11040_20091225_i386.deb or All available at: http://linmodems.technion.ac.il/packages/ltmodem/11c11040/ Add for automation & testing agrsm-tools_0.0.1_all.deb Predictive diagnostics for card in bus 00:1b.0: Modem chipset detected on NAME="Audio device: Intel Corporation 82801I " CLASS=0403 PCIDEV=8086:293e SUBSYS=1179:ff1e IRQ=22 HDA2=00:1b.0 SOFT=8086:293e.HDA HDAchipVendorID=11c1 CHIP=0x11c11040 IDENT=agrsm Driver=agrsm package=agrsm-11c11040 For candidate modem in: 00:1b.0 0403 Audio device: Intel Corporation 82801I Primary device ID: 8086:293e Subsystem PCI_id 1179:ff1e Softmodem codec or chipset from diagnostics: 0x11c11040 from Archives: The HDA card softmodem chip is 0x11c11040 Support type needed or chipset: agrsm Writing DOCs/Intel.txt The AgereSystems/LSI agrsm code supports compiling of a agrmodem + agrserial driver pair. There are a few different chipsets which use this driver pair, but they use different code resources: Chipsets KV* PackageNames (most current as of November 2009) ---------------------------------------------------------------------------------------------- 11c11040 (on HDA audio cards) 2.6.31 agrsm-11c11040_20091225_i386.deb or agrsm-11c11040-2.1.80~20091225.tar.bz2 !! All available at: http://linmodems.technion.ac.il/packages/ltmodem/11c11040/ Additionally there are; automation & testing agrsm-tools_0.0.1_all.deb or agrsm-tools-0.0.1-2.noarch.rpm General background agrsm_howto.txt ------------------------------------------------------------------------------------------------ * KV == latest kernel release with a reported success !! Latest update with major credit to Nikolay Zhuravlev But see conflict issue: http://linmodems.technion.ac.il/bigarch/archive-nineth/msg02753.html For the 11c11040 chip with kernels 2.6.31 and later a change in a modules loading settingmay be necessary. Within the file /etc/modprobe.d/alsa-base.conf (or equivalent for your Distro), change the phrase: options snd-hda-intel power_save=10 to: options snd-hda-intel power_save=0 or the agrsm drivers will not function. For Ubuntu related systems this can be done with: $ sudo gedit /etc/modprobe.d/alsa-base.conf Report from Bjorn Wielens: Please note- trying to load the modules on a OpenSuSE 11.2 system gives an error about the module_version symbol. Using: # modprobe --force agrmodem # modprobe --force agrserial is necessary to load the drivers, and does not appear to cause ill effects. All of the above packages are dkms competent. This means that if your Linux distros dkms package is previously installed, if provides for future updates matching forthcoming kernels. Presently install your Linux Distributions dkms package. It provides for automated driver updates, following upgrade of your kernel. Do install dkms http://linmodems.technion.ac.il/packages/ltmodem/11c11040/dkms-agrsm_2.1.80-7_i386.deb package first before the others, this way subsequent kernel releases, the drivers are automagically updated :) Regards, Antonio On 5/24/10, yasser@xxxxxxxxxxxxxx <yasser@xxxxxxxxxxxxxx> wrote: >
