Modemdata.txt is attached at the bottom of this email. I have downloaded the file martian-full-20061203.tar.gz from http://phep2.technion.ac.il/linmodems/packages/ltmodem/kernel-2.6/martian/ After downloading I unpacked the file into my root folder. There I executed the command 'make'. The error that I received was... make -C kmodule/ modules make[1]: Entering directory `/root/martian/kmodule' make -C /lib/modules/2.6.16.27.tex1.lve/build M="/root/martian/kmodule" modules make[2]: Entering directory `/usr/src/linux-2.6.16.27.tex1.lve' CC [M] /root/martian/kmodule/martian.o CC [M] /root/martian/kmodule/marsio.o CC [M] /root/martian/kmodule/mfifo.o LD [M] /root/martian/kmodule/martian_dev.o Building modules, stage 2. MODPOST CC /root/martian/kmodule/martian_dev.mod.o LD [M] /root/martian/kmodule/martian_dev.ko make[2]: Leaving directory `/usr/src/linux-2.6.16.27.tex1.lve' make[1]: Leaving directory `/root/martian/kmodule' make -C modem/ all make[1]: Entering directory `/root/martian/modem' CC main.o CC dumpers.o CC log.o CC session.o CC mport.o CC pty.o CC sysdep.o sysdep.c: In function `linux_timer_create': sysdep.c:18: error: `__NR_timer_create' undeclared (first use in this function) sysdep.c:18: error: (Each undeclared identifier is reported only once sysdep.c:18: error: for each function it appears in.) sysdep.c: In function `linux_timer_settime': sysdep.c:23: error: `__NR_timer_settime' undeclared (first use in this function) make[1]: *** [sysdep.o] Error 1 make[1]: Leaving directory `/root/martian/modem' make: *** [all] Error 2 Obviously, I see the error "CC sysdep.o", I just dont know what it means. Can someone please explain the situation to me. Or tell me if I am missing something that I can install? Thankyou for your help. Below is the modemdata.txt file as it was spit out by scanModem. _________________________________________ Only plain text email is forwarded by the DISCUSS@xxxxxxxxxxxxx List Server. Do use the following as the email Subject Line: SomeName, YourCountry pclinuxos Linux release 2006 (Texstar) for i586 Kernel 2.6.16.27.tex1.lve on an i686 / kernel 2.6.16.27.tex1.lve This will alert cogent experts, and distinguish cases in the Archives. YourCountry will enable Country Code guidance. Occassionally responses are blocked by an Internet Provider mail filters. So in a day, also check the Archived responses at http://www.linmodems.org . Local Linux experts can be found through: http://www.linux.org/groups/index.html -------------------------- System information ---------------------------- pclinuxos Linux release 2006 (Texstar) for i586 Kernel 2.6.16.27.tex1.lve on an i686 / Linux version 2.6.16.27.tex1.lve (ocilent1@xpc) (gcc version 3.3.1 (Mandrake Linux 9.2 3.3.1-2mdk)) #1 Mon Jul 31 15:59:12 WST 2006 scanModem update of: 2006_December_20 USB modem not detected by lsusb Modem or host audio card candidates have firmware information: PCI slot PCI ID SubsystemID Name ---------- --------- --------- -------------- 00:03.1 115d:000c 8086:2408 Serial controller: Xircom Mini-PCI V.90 56k Modem Modem interrupt assignment and sharing: 11: 1104 XT-PIC uhci_hcd:usb1, yenta, yenta, eth0, CS46XX --- Bootup diagnositcs for card in PCI slot 00:03.1 ---- ACPI: PCI Interrupt 0000:00:03.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 === Finished modem firmware and bootup diagnostics section. === === Next deducing cogent software === For candidate modem in PCI bus: 00:03.1 Class 0700: 115d:000c Serial controller: Xircom Mini-PCI V.90 56k Modem Primary PCI_id 115d:000c Support type needed or chipset: Agere.DSP The modem has a supported Lucent/Agere Mars or Apollo DSP (digital signal processing) chipset. Support packages for 2.6.n kernels are at: http://phep2.technion.ac.il/linmodems/packages/ltmodem/kernel-2.6/martian/ For a temporary fix for 2.6.18 kernels see See AgereDSP.txt for Details. DSP=1 Vendor 115d is XIRCOM, which was purchased by Intel The following devices have Lucent/AgereSystems DSP chipsets supported by the Martian variant of the AgereSystems ltmodem software. XIRCOM 0x115d 0x0000-0x000F XIRCOM 0x115d 0x0440-0x045c XIRCOM 0x115d 0x0010-0x03ff Completed candidate modem analyses. The base of the UDEV device file system is: /dev/.udevdb Versions adequately match for the compiler installed: 3.3.1 and the compiler used in kernel assembly: 3.3.1 Compiling resources appear complete: make utility - /usr/bin/make Compiler version 3.3 kernel_headers base folder /lib/modules/2.6.16.27.tex1.lve/build Checking pppd properties: -rwsr-xr-t 1 root root 300248 Jul 23 18:10 /usr/sbin/pppd In case of an "error 17" "serial loopback" problem, see: http://phep2.technion.ac.il/linmodems/archive-sixth/msg02637.html To enable dialout without Root permission do: $ su - root (not for Ubuntu) chmod a+x /usr/sbin/pppd or under Ubuntu related Linuxes chmod a+x /usr/sbin/pppd Checking settings of: /etc/ppp/options lock noauth noipdefault usepeerdns Read Modem/YourSystem.txt concerning other COMM channels: eth0 Which can interfere with Browser naviagation. Don't worry about the following, it is for the experts should trouble shooting be necessary. ========================================================== # # UDEV rule for modems # creates symlink /dev/modem and takes care of permissions KERNEL="ttyLTM[0-9]", NAME="%k", MODE="0660", GROUP="uucp", SYMLINK="modem" KERNEL="slusb[0-9]", NAME="%k", MODE="0660", GROUP="uucp", SYMLINK="modem" KERNEL="ttySL[0-9]", NAME="%k", MODE="0660", GROUP="uucp", SYMLINK="modem" KERNEL="ttySHCF[0-9]", NAME="%k", MODE="0660", GROUP="uucp", SYMLINK="modem" Checking for modem support lines: -------------------------------------- /device/modem symbolic link: slmodemd created symbolic link /dev/ttySL0: Within /etc/udev/ files: /etc/udev/rules.d/modem.rules:# UDEV rule for modems /etc/udev/rules.d/modem.rules:# creates symlink /dev/modem and takes care of permissions /etc/udev/rules.d/modem.rules:KERNEL="ttyLTM[0-9]", NAME="%k", MODE="0660", GROUP="uucp", SYMLINK="modem" /etc/udev/rules.d/modem.rules:KERNEL="slusb[0-9]", NAME="%k", MODE="0660", GROUP="uucp", SYMLINK="modem" /etc/udev/rules.d/modem.rules:KERNEL="ttySL[0-9]", NAME="%k", MODE="0660", GROUP="uucp", SYMLINK="modem" /etc/udev/rules.d/modem.rules:KERNEL="ttySHCF[0-9]", NAME="%k", MODE="0660", GROUP="uucp", SYMLINK="modem" Within /etc/modprobe.conf files: Within any ancient /etc/devfs files: Within ancient kernel 2.4.n /etc/module.conf files: -------- end modem support lines --------
