Hi Jacques, Just to add my comments here..as I could not understand why you are concentrating on the Audio part.I am not worried about Audio driver, but worried about my modem driver. Below is the O/p of my modem.txt. I can see that the my connexant is in the slot 01:02.0 which is IDENT=hsfmodem Driver=hsfmodem-drivers. Please let me know incase of any information.In the mean time I am dowloading the "http://www.linuxant.com/drivers/hsf/full/archive/hsfmodem-7.80.02.05full/hsfmodem-7.80.02.05full_k2.6.18_8.el5-1rh.i686.rpm.zip"; Please let me know if i am wring anywhere.Thanks again all for your kind help For candidate card in slot 01:02.0, firmware information and bootup diagnostics are: PCI slot PCI ID SubsystemID Name ---------- --------- --------- -------------- 01:02.0 14f1:2f30 14f1:205d Communication controller: Conexant Unknown device 2f30 Modem interrupt assignment and sharing: 0: 4179180 4151000 IO-APIC-edge timer --- Bootup diagnostics for card in PCI slot 01:02.0 ---- For candidate card in slot 00:1b.0, firmware information and bootup diagnostics are: PCI slot PCI ID SubsystemID Name ---------- --------- --------- -------------- 00:1b.0 8086:27d8 1019:2633 Audio device: Intel Corporation 82801G Predictive diagnostics for card in bus 00:1b.0: Modem chipset detected on NAME="Audio device: Intel Corporation 82801G " package="both hcfpcimodem and hsfmodem" CLASS=0403 PCIDEV=8086:27d8 SUBSYS=1019:2633 IRQ=193 IDENT=HCF.HSF For candidate modem in: 00:1b.0 0403 Audio device: Intel Corporation 82801G Primary device ID: 8086:27d8 Support type needed or chipset: HCF.HSF Predictive diagnostics for card in bus 01:02.0:================> This is modem(MAY bE) Modem chipset detected on NAME="Communication controller: Conexant Unknown device 2f30 " CLASS=0780 PCIDEV=14f1:2f30 SUBSYS=14f1:205d HDA2=00:1b.0 IDENT=hsfmodem Driver=hsfmodem-drivers For candidate modem in: 01:02.0 0780 Communication controller: Conexant Unknown device 2f30 Primary device ID: 14f1:2f30 Support type needed or chipset: hsfmodem -- Thanks and Regards, Diptanu Paul EMAIL:- diptanu@xxxxxxxxxxxxxxxxxxxxx "If GNU/Linux does not have any solution... Then you have got a wrong problem....." =======POWER OF OPEN SOURCE======== "If you win, you need not have to explain.... If you loose, you should not be there to explain!" --Adolf Hitler Sorry I forgot what is probably the most important here. This misleading thing: IDENT=HCF.HSF is yet an other pain inflicted on users by the Microsoft way of assembling software. To save the PC manufacturers the effort of installing the right driver matching the modem installed in the machine, the Microsoft drivers for the Conexant HSF and Conexant HCF drivers have been packed in one same file which also includes a wrapper detecting the actual installed modem! Just fine, twice the required memory wasted to load the driver, as well as disk space to store it, but who cares, the Windows customers pay, that's all. Jacques Paul Diptanu wrote: > Hi Antinio, > > Sorry I am saying anything wrong about your comments.However if you are looking in the > section of "NAME="Audio device:" which says HCF.HSF then it may be wrong.As because I > am > not concerned abouth the intel Audio device. I am looking for the driver for the > Connexant modem which scan moem says as HSF modem.belwow is the O/p of scanmodem for > the > connexant that I attached in my previos/initial mail. I am again attaching the > scanmodem o/p if required for your review. > > Predictive diagnostics for card in bus 01:02.0: > Modem chipset detected on > NAME="Communication controller: Conexant Unknown device 2f30 " > CLASS=0780 > PCIDEV=14f1:2f30 > SUBSYS=14f1:205d > HDA2=00:1b.0 > IDENT=hsfmodem > Driver=hsfmodem-drivers > > For candidate modem in: 01:02.0 > 0780 Communication controller: Conexant Unknown device 2f30 > Primary device ID: 14f1:2f30 > Support type needed or chipset: hsfmodem > > > I regret If I have written anything wrong > > Thanking you again for your response. > > ---------------------------------------------------------------------------------- This e-mail and any files transmitted with it are for the sole use of the intended recipient(s) and may contain confidential and privileged information. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies and the original message. The recipient acknowledges that owner of the www.diptanuinfo.co.cc(or the webmaster/administrator) of the website/mail server,are unable to exercise control or ensure or guarantee the integrity of/overthe contents of the information contained in e-mail transmissions and further acknowledges that any views expressed in this message are those of the individual sender only under all circumstances.Before opening any attachments please check them for viruses and defects. ----------------------------------------------------------------------------------
