Selamat, You are connected :) > --> primary DNS address 124.195.15.98 > --> pppd: ��8[08]��8[08] > --> secondary DNS address 114.5.5.5 > --> pppd: ��8[08]��8[08] Add these numbers to /etc/resolv.conf : $ sudo gedit /etc/resolv.conf nameserver 124.195.15.98 nameserver 114.5.5.5 and try to browse. You should succeed. Now if when you attempt to connect again, and you get different numbers, change them to match the ones you got in the connection. There was a little hack/trick that I can't remember if it will work in your case $ sudo cp /etc/wvdial/resolv.conf /etc/resolv.conf when the numbers change everytime, since there is a bug in wvdial that has not been fixed when one uses AutoDNS = yes. We have to apply to these tricks to get working connection(s). Regards, Antonio On Tue, Apr 6, 2010 at 12:24 PM, Selamat Riady <lock44555@xxxxxxxxx> wrote: > still not connected, i think any big different with ubuntu 9.04 with > ubuntu 8.xx. > ubuntu 9.04 is more complex,,,,,, > > this error : > > riady@riady-laptop:~$ dmesg|tail > [ 3499.896193] usb 2-2: new full speed USB device using uhci_hcd and address 5 > [ 3500.120253] hub 2-0:1.0: unable to enumerate USB device on port 2 > [ 3501.176170] usb 2-2: new full speed USB device using uhci_hcd and address 6 > [ 3501.397454] usb 2-2: configuration #1 chosen from 1 choice > [ 3501.401139] usb-storage: probe of 2-2:1.0 failed with error -5 > [ 3501.401164] option 2-2:1.0: GSM modem (1-port) converter detected > [ 3501.401322] usb 2-2: GSM modem (1-port) converter now attached to ttyUSB0 > [ 3501.404615] usb-storage: probe of 2-2:1.1 failed with error -5 > [ 3501.404632] option 2-2:1.1: GSM modem (1-port) converter detected > [ 3501.412057] usb 2-2: GSM modem (1-port) converter now attached to ttyUSB1 > riady@riady-laptop:~$ sudo wvdial starone > --> WvDial: Internet dialer version 1.60 > --> Cannot get information for serial port. > --> Initializing modem. > --> Sending: ATZ > ATZ > OK > --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > OK > --> Modem initialized. > --> Sending: ATDT#777 > --> Waiting for carrier. > ATDT#777 > CONNECT 230400 > --> Carrier detected. Starting PPP immediately. > --> Starting pppd at Tue Apr 6 23:58:31 2010 > --> Pid of pppd: 4866 > --> Using interface ppp0 > --> pppd: ��8[08]��8[08] > --> pppd: ��8[08]��8[08] > --> pppd: ��8[08]��8[08] > --> pppd: ��8[08]��8[08] > --> pppd: ��8[08]��8[08] > --> pppd: ��8[08]��8[08] > --> local IP address 10.245.174.15 > --> pppd: ��8[08]��8[08] > --> remote IP address 10.64.64.64 > --> pppd: ��8[08]��8[08] > --> primary DNS address 124.195.15.98 > --> pppd: ��8[08]��8[08] > --> secondary DNS address 114.5.5.5 > --> pppd: ��8[08]��8[08] > > wvdial.config = > > > [Dialer starone] > Init1 = ATZ > Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > Modem Type = USB Modem > Baud = 230400 > New PPPD = yes > Modem = /dev/ttyUSB0 > ISDN = 0 > Phone = #777 > Password = indosat > Username = starone > Auto DNS = 1 > Stupid Mode = 1 > Auto Reconnect = on > > i don't understand,,,,why ppp setting must change,,,,,,in ubuntu 8.xxx > it's don't needed.....maybe.........................only use > wvdial.config >
