Please check that your configuration file you copied to us is located at /etc/wvdial.conf if not copy it there with: $ sudo cp wvdial.conf /etc/wvdial.conf During the test you reported, wvdial seems to be readinga file at /etc/wvdial.conf which hasn't been edited to remove the at least some of the symbols ; < > Check with: $ cat /etc/wvdial.conf to display the file. MarvS On Mon, Apr 5, 2010 at 8:06 PM, Rami Daoud <ramidawod34@xxxxxxxxx> wrote: > I am using the terminal, I don't have the gnome-ppp > > > > ----- Original Message ---- > From: Jacques Goldberg <Jacques.Goldberg@xxxxxxx> > To: Rami Daoud <ramidawod34@xxxxxxxxx> > Cc: discuss@xxxxxxxxxxxxx > Sent: Tue, April 6, 2010 12:28:48 AM > Subject: Re: Rami, Syria kernel 2.6.28-11-generic > > Rami Daoud wrote: >> Hi all >> who can troubleshoot this dilemma! >> > Is the file copied by uoi below REALLY /etc/wvdial.conf , or perhaps > some other file? > >> >> >> [Dialer Defaults] >> Modem = /dev/modem >> Baud = 517200 >> Init1 = ATZ >> Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >> ISDN = 0 >> Modem Type = Analog Modem >> Country = SYRIA >> Phone = 198799 >> Username = 30725902 >> Password = 28511997 >> Carrier Check = no >> >> >> >> >> >> a@a:~$ sudo wvdial >> --> WvDial: Internet dialer version 1.60 >> --> Initializing modem. >> --> Sending: ATZ >> ATZ >> OK >> --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >> ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >> OK >> --> Modem initialized. >> --> Configuration does not specify a valid phone number. >> --> Configuration does not specify a valid login name. >> --> Configuration does not specify a valid password. >> >> >> >> >> >> >> >> >> >> ----- Original Message ---- >> From: Antonio Olivares <olivares14031@xxxxxxxxx> >> To: Rami Daoud <ramidawod34@xxxxxxxxx> >> Sent: Thu, April 1, 2010 3:14:06 AM >> Subject: Re: Rami, Syria kernel 2.6.28-11-generic >> >> Oops, >> >> Sorry I overlooked it :( >> >> Try commenting ";" adding a ";" before Stupid Mode = yes, and see if >> that makes a difference? >> >> Regards, >> >> Antonio >> >> On 3/31/10, Rami Daoud <ramidawod34@xxxxxxxxx> wrote: >> >>> I already mentioned that I added carrier check = no >>> >>> --- On Wed, 3/31/10, Antonio Olivares <olivares14031@xxxxxxxxx> wrote: >>> >>> >>>> From: Antonio Olivares <olivares14031@xxxxxxxxx> >>>> Subject: Re: Rami, Syria kernel 2.6.28-11-generic >>>> To: "Rami Daoud" <ramidawod34@xxxxxxxxx> >>>> Cc: "Linmodems" <discuss@xxxxxxxxxxxxx> >>>> Date: Wednesday, March 31, 2010, 3:03 PM >>>> Rami, >>>> >>>> Try to add a line to /etc/wvdial.conf file: >>>> >>>> Carrier Check = no; >>>> >>>> and see if you can connect. >>>> >>>> On Wed, Mar 31, 2010 at 1:43 PM, Rami Daoud <ramidawod34@xxxxxxxxx> >>>> wrote: >>>> >>>>> modem is booting fine but it is not detecting a >>>>> >>>> carrie: >>>> >>>>> a@a:~$ sudo wvdial >>>>> --> WvDial: Internet dialer version 1.60 >>>>> --> Initializing modem. >>>>> --> Sending: ATZ >>>>> ATZ >>>>> OK >>>>> --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 >>>>> >>>> +FCLASS=0 >>>> >>>>> ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >>>>> OK >>>>> --> Modem initialized. >>>>> --> Sending: ATDT198999 >>>>> --> Waiting for carrier. >>>>> ATDT198999 >>>>> NO CARRIER >>>>> --> No Carrier! Trying again. >>>>> >>>>> >>>>> And here is my config details >>>>> [Dialer Defaults] >>>>> Init1 = ATZ >>>>> Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >>>>> Modem Type = Analog Modem >>>>> Carrier Check = no >>>>> Stupid Mode = yes >>>>> Baud = 460800 >>>>> New PPPD = yes >>>>> Modem = /dev/modem >>>>> ISDN = 0 >>>>> Phone = 198999 >>>>> Password = 23363437616 >>>>> Username = 33331274536 >>>>> >>>>> >>>>> --- On Wed, 3/31/10, Antonio Olivares <olivares14031@xxxxxxxxx> >>>>> >>>> wrote: >>>> >>>>>> From: Antonio Olivares <olivares14031@xxxxxxxxx> >>>>>> Subject: Re: Rami, Syria kernel 2.6.28-11-generic >>>>>> To: "Rami Daoud" <ramidawod34@xxxxxxxxx> >>>>>> Cc: discuss@xxxxxxxxxxxxx >>>>>> Date: Wednesday, March 31, 2010, 8:19 AM >>>>>> Rami, >>>>>> >>>>>> >>>>>> scanModem detects that your modem is supported >>>>>> >>>> through >>>> >>>>>> hsfmodem >>>>>> drivers available from linuxant: >>>>>> >>>>>> Predictive diagnostics for card in bus 00:07.0: >>>>>> Modem chipset detected on >>>>>> NAME="Audio device: nVidia Corporation MCP67 High >>>>>> Definition Audio " >>>>>> CLASS=0403 >>>>>> PCIDEV=10de:055c >>>>>> SUBSYS=103c:30ea >>>>>> IRQ=21 >>>>>> HDA2=00:07.0 >>>>>> SOFT=10de:055c.HDA >>>>>> ArchivedChip=0x14f12bfa >>>>>> CodecClass=14f1 >>>>>> IDENT=hsfmodem >>>>>> Driver=hsfmodem-drivers >>>>>> >>>>>> For candidate modem in: 00:07.0 >>>>>> 0403 Audio device: nVidia Corporation >>>>>> MCP67 High Definition Audio >>>>>> Primary device ID: 10de:055c >>>>>> Subsystem PCI_id 103c:30ea >>>>>> Softmodem codec or chipset from >>>>>> >>>> diagnostics: >>>> >>>>>> from Archives: 0x14f12bfa >>>>>> >>>>>> >>>>>> >>>>>> Support type needed or chipset: hsfmodem >>>>>> >>>>>> >>>>>> For owners of a Dell PCs with Conexant HSF modems, >>>>>> >>>> a driver >>>> >>>>>> source >>>>>> package with full speed enabled is available, but >>>>>> >>>> requires >>>> >>>>>> driver >>>>>> compiling. Read DOCs/Conexant.txt >>>>>> >>>>>> From >>>>>> http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php >>>>>> download >>>>>> >>>>>> >>>> hsfmodem-7.80.02.05full_k2.6.28_11_generic_ubuntu_i386.deb.zip >>>> >>>>>> Under Linux unpack with: >>>>>> $ unzip hsfmodem*.zip >>>>>> Then install with: >>>>>> $ sudo dpkg -i hsfmodem*.deb >>>>>> Subsequently, the modem should be found with >>>>>> $ sudo wvdialconf /etc/wvdial.conf >>>>>> Edit in your personal information with: >>>>>> $ sudo gedit /etc/wvdial.conf >>>>>> and try dialing out with: >>>>>> $ sudo wvdial. >>>>>> See DOCs/Testing.txt for details. >>>>>> >>>>>> NOTE: You may need to install alsa-1.0.23? >>>>>> >>>> package >>>> >>>>>> from linuxant >>>>>> check the linuxant page/site for more details. >>>>>> >>>>>> Regards, >>>>>> >>>>>> Antonio >>>>>> >>>>>> On 3/31/10, Rami Daoud <ramidawod34@xxxxxxxxx> >>>>>> wrote: >>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>> >>>>> >>>>> >>> >>> >>> >> >> >> >> > > > >
