I am using the terminal, I don't have the gnome-ppp ----- Original Message ---- From: Jacques Goldberg <Jacques.Goldberg@xxxxxxx> To: Rami Daoud <ramidawod34@xxxxxxxxx> Cc: discuss@xxxxxxxxxxxxx Sent: Tue, April 6, 2010 12:28:48 AM Subject: Re: Rami, Syria kernel 2.6.28-11-generic Rami Daoud wrote: > Hi all > who can troubleshoot this dilemma! > Is the file copied by uoi below REALLY /etc/wvdial.conf , or perhaps some other file? > > > [Dialer Defaults] > Modem = /dev/modem > Baud = 517200 > Init1 = ATZ > Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > ISDN = 0 > Modem Type = Analog Modem > Country = SYRIA > Phone = 198799 > Username = 30725902 > Password = 28511997 > Carrier Check = no > > > > > > a@a:~$ sudo wvdial > --> WvDial: Internet dialer version 1.60 > --> Initializing modem. > --> Sending: ATZ > ATZ > OK > --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > OK > --> Modem initialized. > --> Configuration does not specify a valid phone number. > --> Configuration does not specify a valid login name. > --> Configuration does not specify a valid password. > > > > > > > > > > ----- Original Message ---- > From: Antonio Olivares <olivares14031@xxxxxxxxx> > To: Rami Daoud <ramidawod34@xxxxxxxxx> > Sent: Thu, April 1, 2010 3:14:06 AM > Subject: Re: Rami, Syria kernel 2.6.28-11-generic > > Oops, > > Sorry I overlooked it :( > > Try commenting ";" adding a ";" before Stupid Mode = yes, and see if > that makes a difference? > > Regards, > > Antonio > > On 3/31/10, Rami Daoud <ramidawod34@xxxxxxxxx> wrote: > >> I already mentioned that I added carrier check = no >> >> --- On Wed, 3/31/10, Antonio Olivares <olivares14031@xxxxxxxxx> wrote: >> >> >>> From: Antonio Olivares <olivares14031@xxxxxxxxx> >>> Subject: Re: Rami, Syria kernel 2.6.28-11-generic >>> To: "Rami Daoud" <ramidawod34@xxxxxxxxx> >>> Cc: "Linmodems" <discuss@xxxxxxxxxxxxx> >>> Date: Wednesday, March 31, 2010, 3:03 PM >>> Rami, >>> >>> Try to add a line to /etc/wvdial.conf file: >>> >>> Carrier Check = no; >>> >>> and see if you can connect. >>> >>> On Wed, Mar 31, 2010 at 1:43 PM, Rami Daoud <ramidawod34@xxxxxxxxx> >>> wrote: >>> >>>> modem is booting fine but it is not detecting a >>>> >>> carrie: >>> >>>> a@a:~$ sudo wvdial >>>> --> WvDial: Internet dialer version 1.60 >>>> --> Initializing modem. >>>> --> Sending: ATZ >>>> ATZ >>>> OK >>>> --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 >>>> >>> +FCLASS=0 >>> >>>> ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >>>> OK >>>> --> Modem initialized. >>>> --> Sending: ATDT198999 >>>> --> Waiting for carrier. >>>> ATDT198999 >>>> NO CARRIER >>>> --> No Carrier! Trying again. >>>> >>>> >>>> And here is my config details >>>> [Dialer Defaults] >>>> Init1 = ATZ >>>> Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >>>> Modem Type = Analog Modem >>>> Carrier Check = no >>>> Stupid Mode = yes >>>> Baud = 460800 >>>> New PPPD = yes >>>> Modem = /dev/modem >>>> ISDN = 0 >>>> Phone = 198999 >>>> Password = 23363437616 >>>> Username = 33331274536 >>>> >>>> >>>> --- On Wed, 3/31/10, Antonio Olivares <olivares14031@xxxxxxxxx> >>>> >>> wrote: >>> >>>>> From: Antonio Olivares <olivares14031@xxxxxxxxx> >>>>> Subject: Re: Rami, Syria kernel 2.6.28-11-generic >>>>> To: "Rami Daoud" <ramidawod34@xxxxxxxxx> >>>>> Cc: discuss@xxxxxxxxxxxxx >>>>> Date: Wednesday, March 31, 2010, 8:19 AM >>>>> Rami, >>>>> >>>>> >>>>> scanModem detects that your modem is supported >>>>> >>> through >>> >>>>> hsfmodem >>>>> drivers available from linuxant: >>>>> >>>>> Predictive diagnostics for card in bus 00:07.0: >>>>> Modem chipset detected on >>>>> NAME="Audio device: nVidia Corporation MCP67 High >>>>> Definition Audio " >>>>> CLASS=0403 >>>>> PCIDEV=10de:055c >>>>> SUBSYS=103c:30ea >>>>> IRQ=21 >>>>> HDA2=00:07.0 >>>>> SOFT=10de:055c.HDA >>>>> ArchivedChip=0x14f12bfa >>>>> CodecClass=14f1 >>>>> IDENT=hsfmodem >>>>> Driver=hsfmodem-drivers >>>>> >>>>> For candidate modem in: 00:07.0 >>>>> 0403 Audio device: nVidia Corporation >>>>> MCP67 High Definition Audio >>>>> Primary device ID: 10de:055c >>>>> Subsystem PCI_id 103c:30ea >>>>> Softmodem codec or chipset from >>>>> >>> diagnostics: >>> >>>>> from Archives: 0x14f12bfa >>>>> >>>>> >>>>> >>>>> Support type needed or chipset: hsfmodem >>>>> >>>>> >>>>> For owners of a Dell PCs with Conexant HSF modems, >>>>> >>> a driver >>> >>>>> source >>>>> package with full speed enabled is available, but >>>>> >>> requires >>> >>>>> driver >>>>> compiling. Read DOCs/Conexant.txt >>>>> >>>>> From >>>>> http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php >>>>> download >>>>> >>>>> >>> hsfmodem-7.80.02.05full_k2.6.28_11_generic_ubuntu_i386.deb.zip >>> >>>>> Under Linux unpack with: >>>>> $ unzip hsfmodem*.zip >>>>> Then install with: >>>>> $ sudo dpkg -i hsfmodem*.deb >>>>> Subsequently, the modem should be found with >>>>> $ sudo wvdialconf /etc/wvdial.conf >>>>> Edit in your personal information with: >>>>> $ sudo gedit /etc/wvdial.conf >>>>> and try dialing out with: >>>>> $ sudo wvdial. >>>>> See DOCs/Testing.txt for details. >>>>> >>>>> NOTE: You may need to install alsa-1.0.23? >>>>> >>> package >>> >>>>> from linuxant >>>>> check the linuxant page/site for more details. >>>>> >>>>> Regards, >>>>> >>>>> Antonio >>>>> >>>>> On 3/31/10, Rami Daoud <ramidawod34@xxxxxxxxx> >>>>> wrote: >>>>> >>>>>> >>>>>> >>>>>> >>>> >>>> >>>> >> >> >> > > > >
