Just an FYI, I can confirm that my 11c11040 does work on this system/kernel. Can you post the results of 'cat /proc/asound/card0/codec#1'? This will confirm modem type. Bjorn. On 03/09/2010 10:26 AM, Benjamin Colling wrote: > Hi Marvin, > > my last test was actually with an openSUSE 11.2 System with Kernel 2.6.31.5. > The output of scanModem was based on Live-CD (Knoppix 6.2.1) with Kernel 2.6.32.6 > > > Here is the scanmodem output (openSUSE) with disabled snd-hda-intel power-feature: > > -------------------------- System information ---------------------------- > CPU=i686, Welcome , ALSA_version=1.0.20 > Linux version 2.6.31.8-0.1-default (geeko@buildhost) (gcc version 4.4.1 [gcc-4_4-branch revision 150839] (SUSE Linux) ) #1 SMP 2009-12-15 23:55:40 +0100 > scanModem update of: 2010_02_25 > > /etc/lsb-release not found > > > Presently install your Linux Distributions dkms package. It provides for automated driver updates, > following upgrade of your kernel. For details see http://linux.dell.com/projects.shtml#dkms > > There are no blacklisted modem drivers in /etc/modprobe* files > > Potentially useful modem drivers now loaded are: > snd_hda_intel > > Attached USB devices are: > ID 8087:0020 > ID 3538:0054 Power Quotient International Co., Ltd Flash Drive (2GB) > ID 8087:0020 > If a cellphone is not detected, see http://ubuntuforums.org/archive/index.php/t-878554.html > A sample report is: http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html > > If a USB modem or cellphone is attached and was not detected, please > provide available information in your request to discuss@xxxxxxxxxxxxx > > Candidate PCI devices with modem chips are: > 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) > 00:16.3 Serial controller: Intel Corporation 5 Series/3400 Series Chipset KT Controller (rev 06) > 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) > High Definition Audio cards can host modem chips. > > For candidate card in slot 00:16.0, firmware information and bootup diagnostics are: > PCI slot PCI ID SubsystemID Name > ---------- --------- --------- -------------- > 00:16.0 8086:3b64 8086:3b64 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller > > Modem interrupt assignment and sharing: > 25: 0 0 0 0 HPET_MSI-edge hpet3 > --- Bootup diagnostics for card in PCI slot 00:16.0 ---- > [ 2.662162] pci 0000:00:16.0: reg 10 64bit mmio: [0x9c827900-0x9c82790f] > [ 2.662215] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold > [ 2.662219] pci 0000:00:16.0: PME# disabled > > The PCI slot 00:16.0 of the modem card may be disabled early in > a bootup process, but then enabled later. If modem drivers load > but the modem is not responsive, read DOCs/Bootup.txt about possible fixes. > Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx > if help is needed. > > > For candidate card in slot 00:16.3, firmware information and bootup diagnostics are: > PCI slot PCI ID SubsystemID Name > ---------- --------- --------- -------------- > 00:16.3 8086:3b67 8086:3b67 Serial controller: Intel Corporation 5 Series/3400 Series Chipset KT Controller > > Modem interrupt assignment and sharing: > 17: 0 1 1 1 IO-APIC-fasteoi yenta > --- Bootup diagnostics for card in PCI slot 00:16.3 ---- > [ 2.662356] pci 0000:00:16.3: reg 10 io port: [0x6080-0x6087] > [ 2.662362] pci 0000:00:16.3: reg 14 32bit mmio: [0x9c826000-0x9c826fff] > [ 3.143929] serial 0000:00:16.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 > [ 3.143995] 0000:00:16.3: ttyS4 at I/O 0x6080 (irq = 17) is a 16550A > > For candidate card in slot 00:1b.0, firmware information and bootup diagnostics are: > PCI slot PCI ID SubsystemID Name > ---------- --------- --------- -------------- > 00:1b.0 8086:3b56 8086:3b56 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio > > Modem interrupt assignment and sharing: > 22: 933 932 901 912 IO-APIC-fasteoi ehci_hcd:usb1, HDA Intel > --- Bootup diagnostics for card in PCI slot 00:1b.0 ---- > [ 2.662628] pci 0000:00:1b.0: reg 10 64bit mmio: [0x9c820000-0x9c823fff] > [ 2.662664] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold > [ 2.662667] pci 0000:00:1b.0: PME# disabled > [ 11.862240] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 > [ 11.862275] HDA Intel 0000:00:1b.0: setting latency timer to 64 > [ 12.000169] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6 > [ 12.011602] input: HDA Intel Mic at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 > [ 12.011740] input: HDA Intel Speaker at Int N/A Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 > [ 12.011840] input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 > [ 170.111634] HDA Intel 0000:00:1b.0: PCI INT A disabled > [ 704.714667] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 > [ 704.714699] HDA Intel 0000:00:1b.0: setting latency timer to 64 > [ 704.831187] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10 > [ 704.844109] input: HDA Intel Mic at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 > [ 704.844203] input: HDA Intel Speaker at Int N/A Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 > [ 704.844275] input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 > > The PCI slot 00:1b.0 of the modem card may be disabled early in > a bootup process, but then enabled later. If modem drivers load > but the modem is not responsive, read DOCs/Bootup.txt about possible fixes. > Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx > if help is needed. > > > === Finished firmware and bootup diagnostics, next deducing cogent software. === > Completed candidate modem analyses. > > The base of the UDEV device file system is: /dev/.udev > > Versions adequately match for the compiler installed: 4.4.1 > and the compiler used in kernel assembly: 4.4 > > linux-headers-2.6.31.8-0.1-default resources needed for compiling are not manifestly ready! > The patch utility is needed for compiling ALSA drivers, and possibly others. > > If compiling is necessary packages must be installed, providing: > kernel-source-2.6.31.8-0.1-default > > > If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then > Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev > and any of its dependents, under Ubuntu linux-libc-dev > > If an alternate ethernet connection is available, > $ apt-get update > $ apt-get -s install linux-kernel-devel > will install needed packages. > For Debian/Ubuntu related distributions, run the following command to display the needed package list: > > Otherwise packages have to be found through http://packages.ubuntu.com > Once downloaded and transferred into a Linux partition, > they can be installed alltogether with: > $ sudo dpkg -i *.deb > > > Checking pppd properties: > -rwxr-xr-x 1 root dialout 330764 Oct 19 17:45 /usr/sbin/pppd > > In case of an "error 17" "serial loopback" problem, see: > http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html > > To enable dialout without Root permission do: > $ su - root (not for Ubuntu) > chmod a+x /usr/sbin/pppd > or under Ubuntu related Linuxes > chmod a+x /usr/sbin/pppd > > Checking settings of: /etc/ppp/options > noipdefault > noauth > crtscts > lock > modem > asyncmap 0 > nodetach > lcp-echo-interval 30 > lcp-echo-failure 4 > lcp-max-configure 60 > lcp-restart 2 > idle 600 > noipx > file /etc/ppp/filters > > In case of a message like: > Warning: Could not modify /etc/ppp/pap-secrets: Permission denied > see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html > > For guidance on FAX usage, get from http://linmodems.technion.ac.il/packages/ get faxing.tar.gz > It has samples for a modem using port /dev/ttySL0, which must be changed to match your modem's port. > > Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 eth1 > Which can interfere with Browser naviagation. > > Don't worry about the following, it is for experts should trouble shooting be necessary. > ========================================================== > > Checking for modem support lines: > -------------------------------------- > /device/modem symbolic link: > slmodemd created symbolic link /dev/ttySL0: > Within /etc/udev/ files: > /etc/udev/rules.d/51-hso-udev.rules:SUBSYSTEM=="tty", SUBSYSTEMS=="usb", ATTR{hsotype}=="Modem", SYMLINK+="wmodem0" > /etc/udev/rules.d/51-hso-udev.rules:SUBSYSTEM=="tty", SYSFS{hsotype}=="Modem", SYMLINK+="wmodem0" > /etc/udev/rules.d/77-network.rules:SUBSYSTEM=="net", ENV{INTERFACE}=="lo*|dummy*|vif*.*|br*|bond*|vlan*|gre*|sit*|tap*|tun*|ipip*|ip6tnl*|ipsec*|ppp*|ippp*|isdn*|modem*|dsl*|plip*|irda*", GOTO="skip_ifup" > Within /etc/modprobe.conf files: > /etc/modprobe.d/00-system.conf:# Linux ACP modem (Mwave) > Within any ancient /etc/devfs files: > > Within ancient kernel 2.4.n /etc/module.conf files: > > --------- end modem support lines -------- > > > > Ben > > > > -----Ursprüngliche Nachricht----- > Von: Marvin Stodolsky [mailto:marvin.stodolsky@xxxxxxxxx] > Gesendet: Dienstag, 9. März 2010 14:44 > An: Benjamin Colling > Cc: discuss@xxxxxxxxxxxxx > Betreff: Re: agere softmodem HDA + Intel Ibex Peak High Definition Audio > > Ben, > > The last kernel for which others are having success with the 11c11040 > modem chip on HDA cards is 2.6.31, rather than the 2.6.32 you are now > using. Would you please install an earlier kernel and check again for > modem detection. > > MarvS > > On Tue, Mar 9, 2010 at 6:26 AM, Benjamin Colling <bbj17@xxxxxx> wrote: >> Hi Marv, >> >> based on agrsm-11c11040-2.1.80~20091225 >> >> I loaded the module (after rmmod snd*): >> >> modprobe snd-hda-intel power_save=0 power_save_controller=N >> >> here is dmesg output: >> >> [ 4850.630868] HDA Intel 0000:00:1b.0: PCI INT A disabled >> [ 4951.043238] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 >> [ 4951.043291] HDA Intel 0000:00:1b.0: setting latency timer to 64 >> [ 4951.174798] ALSA /usr/src/packages/BUILD/kernel-default-2.6.31.5/linux-2.6.31/sound/pci/hda/hda_codec.c:3881: autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0) >> [ 4951.174807] ALSA /usr/src/packages/BUILD/kernel-default-2.6.31.5/linux-2.6.31/sound/pci/hda/hda_codec.c:3885: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) >> [ 4951.174815] ALSA /usr/src/packages/BUILD/kernel-default-2.6.31.5/linux-2.6.31/sound/pci/hda/hda_codec.c:3889: hp_outs=1 (0xb/0x0/0x0/0x0/0x0) >> [ 4951.174822] ALSA /usr/src/packages/BUILD/kernel-default-2.6.31.5/linux-2.6.31/sound/pci/hda/hda_codec.c:3890: mono: mono_out=0x0 >> [ 4951.174828] ALSA /usr/src/packages/BUILD/kernel-default-2.6.31.5/linux-2.6.31/sound/pci/hda/hda_codec.c:3901: inputs: mic=0xa, fmic=0x0, line=0x0, fline=0x0, cd=0x0, aux=0x0 >> [ 4951.175130] ALSA /usr/src/packages/BUILD/kernel-default-2.6.31.5/linux-2.6.31/sound/pci/hda/patch_sigmatel.c:2969: stac92xx: dac_nids=1 (0x13/0x0/0x0/0x0/0x0) >> [ 4951.175491] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9 >> [ 4951.219719] input: HDA Intel Mic at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 >> [ 4951.219814] input: HDA Intel Speaker at Int N/A Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 >> [ 4951.219886] input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 >> [ 5119.756528] * Hello Agere Driver ** >> [ 5119.756610] usbcore: registered new interface driver agr12dec2006 >> [ 5121.281565] Loading module Agere Modem Controller driver version 2.1.80 (2007-10-01) >> [ 5125.431340] serial8250_register_ports: BaseAddress 0x0400 Irq 3 >> [ 5125.431354] ttyAGS3 at I/O 0x400 (irq = 3) is a AgereModem >> [ 5125.431439] agrserial - ret_val 0, call: lt_modem_ops.init_modem >> [ 5125.431449] Loading module Agere Modem Interface driver version 2.1.80.0 (2007-10-01) >> >> Created the link: ln -s /dev/ttySAGR /dev/ttyAGS3 >> >> Executed wvdialconf: >> >> Editing `/etc/wvdial.conf'. >> >> Scanning your serial ports for a modem. >> >> ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud >> ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud >> ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. >> Modem Port Scan<*1>: S1 S2 S3 >> ttyS4<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud >> ttyS4<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud >> ttyS4<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. >> Modem Port Scan<*1>: S5 S6 S7 >> ttySAGR<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud >> ttySAGR<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud >> ttySAGR<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. >> >> >> dmesg-output (original numSupportedDevice): >> >> [ 5235.659191] ==> codecType = 0x31 >> [ 5235.659200] ERR: Control Interface failed >> >> >> dmesg-output (numSupportedDevice { 0x8086, 0x3b56, 0x0000, 0x0000 },) >> [ 5438.363024] ==> codecType = 0xffffff58 >> >> Ben >> >> >> >> -----Ursprüngliche Nachricht----- >> Von: Marvin Stodolsky [mailto:marvin.stodolsky@xxxxxxxxx] >> Gesendet: Montag, 8. März 2010 20:45 >> An: Benjamin Colling >> Cc: discuss@xxxxxxxxxxxxx >> Betreff: Re: agere softmodem HDA + Intel Ibex Peak High Definition Audio >> >> Ben, >> >> VEN_11C1&DEV_1040 is equivalent under Linux do the 11c11040 chip >> which is hosted on the Subsystem of you HDAudio card. >> >> Nikolay has shown that the following change is necessary under 2.6.31+ kernels >> Do >> $ sudo gedit /etc/modprobe.d/alsa-base.conf >> Near the end of the file there is a line: >> options snd-hda-intel power_save=10 power_save_controller=N model=mbp3 >> Change the power_save=10, to 0, per line below: >> options snd-hda-intel power_save=0 power_save_controller=N model=mbp3 >> >> Then reboot, and retest the modem with: >> # wvdialconf >> Of course first make sure the drivers are loaded & remember to set a >> symbolic link. >> # ln -s /dev/ttySAGR /dev/ttyAGS3 >> >> MarvS >> scanModem manitainer >> >> >> On Mon, Mar 8, 2010 at 12:32 PM, Benjamin Colling <bbj17@xxxxxx> wrote: >>> Hi, >>> >>> It is a laptop. >>> In Windows 7 the modem is shown as: "Agere Systems HDA Modem" >>> >>> Windows Modem-HardwareIDs >>> HDAUDIO\FUNC_02&VEN_11C1&DEV_1040&SUBSYS_11C10001&REV_1002 >>> HDAUDIO\FUNC_02&VEN_11C1&DEV_1040&SUBSYS_11C10001 >>> >>> Driver Details: >>> C:\Windows\system32\Drivers\AGRSM.sys >>> LSI Corp >>> 2.2.89.2 >>> >>> Modem-Test: >>> >>> ATQ0V1E0 - OK >>> AT+GMM - H.324 video-ready rev. 1.0 >>> AT+FCLASS=? - 0,1,8 >>> AT#CLS=? - BEFEHL WIRD NICHT UNTERSTÜTZT >>> AT+GCI? - +GCI:04 >>> AT+GCI=? - >>> +GCI:(00,01,02,04,06,07,09,0A,0B,0C,0D,0E,0F,10,11,12,14,15,16,19,1A,1B,1D,1 >>> E,1F,20,21,22,23,24,25,26,27,29,2B,2D,2E,2F,30,31,32,33,35,36,37,38,3C,3D,40 >>> ,41,43,44,45,46,47,48,49,4B,4C,4D,4E,4F,50,51,52,53,54,57,58,59,5A,5B,5E,5F, >>> 61,62,63,64,66,68,69,6A,6B,6C,6D,6F,70,72,73,74,77,78,7A,7B,7C,7D,7E,7F,80,8 >>> 1,82,83,84,85,86,87,88,89,8A,8B,8C,8D,8E,8F,90,93,96,97,98,99,9B,9C,9F,A0,A1 >>> ,A3,A4,A5,A6,A7,A8,A9,AA,AC,AD,AE,B2,B3,B4,B5,B6,B7,B8,BB,BC,BF,C1,C2,C4) >>> ATI1 - OK >>> ATI2 - OK >>> ATI3 - LSI Softmodem Version 2.2.89.2 >>> ATI4 - Built on 11/10/2008 09:51:51 >>> ATI5 - 2.2.89.2, HDA MB, HDA, A35 S-Rev:2 L-Rev:3, 06 >>> ATI6 - OK >>> ATI7 - HDA MB >>> >>> >>> Benjamin >>> >>> >>> -----Ursprüngliche Nachricht----- >>> Von: Jacques Goldberg [mailto:Jacques.Goldberg@xxxxxxx] >>> Gesendet: Montag, 8. März 2010 18:00 >>> An: Benjamin Colling >>> Cc: discuss@xxxxxxxxxxxxx >>> Betreff: Re: agere softmodem HDA + Intel Ibex Peak High Definition Audio >>> >>> Benjamin, >>> >>> >>> In your scanModem output there is no sign of presence of any Agere modem >>> hardware (which would couple to the agrsm driver). >>> >>> The driver is a program, not hardware. You can always send soem data to >>> any program: perhaps the driver tries to do soemthing, but whatever it >>> will do will be sent into vacuum, The presence of the agrsm can only >>> cause trouble when trying to use the right driver. >>> >>> >>> The Intel HECI controller can in no way drive a modem. HECI has nothing >>> to do with that. >>> >>> >>> Thus scanModem has not found anything resembling a modem in your computer. >>> >>> >>> "Hopefully" (poor you) you may have Windows running on the same machine. >>> >>> In the folder where scanModem created its output (the file >>> ModemData.txt), there is information of using Windows in identifying >>> some of the modem information, often enough to know how to proceed >>> under Linux. >>> >>> Please try that approach. >>> >>> It would help us a lot to know if your computer is a laptop or a >>> desktop. If destop, open the box and follow back the cable connected >>> to the modem jack until you land on a card or on a chip, and copy for us >>> anything readable on the card or chip. >>> >>> >>> Jacques >>> >>> >>> Benjamin Colling wrote: >>> >>>> Hi, >>>> >>>> agrsm-11c11040 packages was not recommended by scanModem utility. But I >>> did >>>> not find any other software. >>>> >>>> >>>>>> What does the following reports? >>>>>> >>>>>>>> sudo wvdialconf /etc/wvdial.conf >>>>>>>> >>>> >>>> Wvdial (original numSupportedDevice) >>>> --> WvDial: Internet dialer version 1.60 >>>> --> Initializing modem. >>>> --> Sending: ATZ >>>> --> Sending: ATQ0 >>>> --> Re-Sending: ATZ >>>> --> Modem not responding. >>>> >>>> Kernel-Msg: >>>> [ 1757.377343] ==> codecType = 0x31 >>>> [ 1757.377349] ERR: Control Interface failed >>>> >>>> >>>> >>>>>> I run 'nm agrmodemlib.o_shipped | grep numSupportedDevice' >>>>>> and it tells me the binary blob is using the variable in some way. >>>>>> Maybe something inside that blob maxed out when you added the line? >>>>>> What if instead of adding the line you replace some existing >>>>>> line with your line? >>>>>> >>>> >>>> I changed an existing line but get this output, when accessing the device >>>> with wvdial: >>>> >>>> [ 1949.953524] * Hello Agere Driver ** >>>> [ 1949.953585] usbcore: registered new interface driver agr12dec2006 >>>> [ 1951.198280] Loading module Agere Modem Controller driver version 2.1.80 >>>> (2007-10-01) >>>> [ 1960.368259] serial8250_register_ports: BaseAddress 0x0400 Irq 3 >>>> [ 1960.368267] ttyAGS3 at I/O 0x400 (irq = 3) is a AgereModem >>>> [ 1960.368685] agrserial - ret_val 0, call: lt_modem_ops.init_modem >>>> [ 1960.368690] Loading module Agere Modem Interface driver version >>> 2.1.80.0 >>>> (2007-10-01) >>>> [ 1975.377046] ==> codecType = 0x6c466174 >>>> >>>> >>>> >>>> >>>> Here is the output of scanModem: >>>> >>>> -------------------------- System information >>> ---------------------------- >>>> CPU=i686, debian , ALSA_version=1.0.21 >>>> Linux version 2.6.32.6 (root@Knoppix) (gcc version 4.4.3 20100108 >>>> (prerelease) (Debian 4.4.2-9) ) #8 SMP PREEMPT Thu Jan 28 10:51:16 CET >>> 2010 >>>> scanModem update of: 2010_02_25 >>>> The modem symbolic link is /dev/modem -> /dev/ttyAGS3 >>>> /etc/lsb-release not found >>>> >>>> >>>> Presently install your Linux Distributions dkms package. It provides for >>>> automated driver updates, >>>> following upgrade of your kernel. For details see >>>> http://linux.dell.com/projects.shtml#dkms >>>> >>>> There are no blacklisted modem drivers in /etc/modprobe* files >>>> >>>> Potentially useful modem drivers now loaded are: >>>> snd_hda_intel agrmodem agrserial >>>> >>>> Attached USB devices are: >>>> ID 3538:0054 Power Quotient International Co., Ltd Flash Drive (2GB) >>>> ID 8087:0020 Intel Corp. Integrated Rate Matching Hub >>>> ID 8087:0020 Intel Corp. Integrated Rate Matching Hub >>>> If a cellphone is not detected, see >>>> http://ubuntuforums.org/archive/index.php/t-878554.html >>>> A sample report is: >>>> http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html >>>> >>>> If a USB modem or cellphone is attached and was not detected, please >>>> provide available information in your request to discuss@xxxxxxxxxxxxx >>>> >>>> Candidate PCI devices with modem chips are: >>>> 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series >>>> Chipset HECI Controller (rev 06) >>>> 00:16.3 Serial controller: Intel Corporation 5 Series/3400 Series Chipset >>> KT >>>> Controller (rev 06) >>>> 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High >>>> Definition Audio (rev 06) >>>> High Definition Audio cards can host modem chips. >>>> >>>> For candidate card in slot 00:16.0, firmware information and bootup >>>> diagnostics are: >>>> PCI slot PCI ID SubsystemID Name >>>> ---------- --------- --------- -------------- >>>> 00:16.0 8086:3b64 8086:3b64 Communication controller: >>>> Intel Corporation 5 Series/3400 Series Chipset HECI Controller >>>> >>>> Modem interrupt assignment and sharing: >>>> 25: 0 0 0 0 HPET_MSI-edge hpet3 >>>> --- Bootup diagnostics for card in PCI slot 00:16.0 ---- >>>> >>>> For candidate card in slot 00:16.3, firmware information and bootup >>>> diagnostics are: >>>> PCI slot PCI ID SubsystemID Name >>>> ---------- --------- --------- -------------- >>>> 00:16.3 8086:3b67 8086:3b67 Serial controller: Intel >>>> Corporation 5 Series/3400 Series Chipset KT Controller >>>> >>>> Modem interrupt assignment and sharing: >>>> 17: 14 17 11 10 IO-APIC-fasteoi yenta >>>> --- Bootup diagnostics for card in PCI slot 00:16.3 ---- >>>> [ 15.421013] serial 0000:00:16.3: PCI INT B -> GSI 17 (level, low) -> >>> IRQ >>>> 17 >>>> [ 15.421260] 0000:00:16.3: ttyS1 at I/O 0x6080 (irq = 17) is a 16550A >>>> >>>> For candidate card in slot 00:1b.0, firmware information and bootup >>>> diagnostics are: >>>> PCI slot PCI ID SubsystemID Name >>>> ---------- --------- --------- -------------- >>>> 00:1b.0 8086:3b56 8086:3b56 Audio device: Intel >>>> Corporation 5 Series/3400 Series Chipset High Definition Audio >>>> >>>> Modem interrupt assignment and sharing: >>>> 22: 1003 995 1012 1007 IO-APIC-fasteoi >>>> ehci_hcd:usb1, HDA Intel >>>> --- Bootup diagnostics for card in PCI slot 00:1b.0 ---- >>>> [ 15.098895] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> >>>> IRQ 22 >>>> [ 15.098931] HDA Intel 0000:00:1b.0: setting latency timer to 64 >>>> >>>> === Finished firmware and bootup diagnostics, next deducing cogent >>> software. >>>> === >>>> Completed candidate modem analyses. >>>> >>>> The base of the UDEV device file system is: /dev/.udev >>>> >>>> Versions adequately match for the compiler installed: 4.4.3 >>>> and the compiler used in kernel assembly: 4.4.3 >>>> >>>> >>>> >>>> Minimal compiling resources appear complete: >>>> make utility - /usr/bin/make >>>> Compiler version 4.4 >>>> linuc_headers base folder /lib/modules/2.6.32.6/build >>>> >>>> However some compilations and executable functions may need additional >>>> files, >>>> in the FileNames.h (so called kernel "h"eaders) collection installed in >>>> /usr/include/ . >>>> For martian_modem, additional required packages are needed. The also >>>> required headers of package libc6 are commonly installed by default. >>>> Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev >>>> packages, for kernels 2.6.24 and later versions. >>>> In not included on your install CD, search for them at >>>> http://packages.ubuntu.com >>>> or comparable Repository for other Linux distros. >>>> When compiling ALSA drivers, the utility "patch" will also be needed. >>>> >>>> >>>> Compressed files at: /usr/src/linux-source-2.6.32.6.tar.bz2 >>>> >>>> For Debian and some related distributions, a package kernel-kbuild-2.6-32 >>>> may be needed to support driver compiling. >>>> >>>> >>>> If a driver compilation fails, with message including some lack of some >>>> FileName.h (stdio.h for example), then >>>> Some additional kernel-header files need installation to /usr/include. The >>>> minimal additional packages are libc6-dev >>>> and any of its dependents, under Ubuntu linux-libc-dev >>>> >>>> If an alternate ethernet connection is available, >>>> $ apt-get update >>>> $ apt-get -s install linux-kernel-devel >>>> will install needed packages. >>>> For Debian/Ubuntu related distributions, run the following command to >>>> display the needed package list: >>>> >>>> Otherwise packages have to be found through http://packages.ubuntu.com >>>> Once downloaded and transferred into a Linux partition, >>>> they can be installed alltogether with: >>>> $ sudo dpkg -i *.deb >>>> >>>> >>>> Checking pppd properties: >>>> -rwsr-xr-- 1 root dip 274760 28. Nov 2008 /usr/sbin/pppd >>>> >>>> In case of an "error 17" "serial loopback" problem, see: >>>> http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html >>>> >>>> To enable dialout without Root permission do: >>>> $ su - root (not for Ubuntu) >>>> chmod a+x /usr/sbin/pppd >>>> or under Ubuntu related Linuxes >>>> chmod a+x /usr/sbin/pppd >>>> >>>> Checking settings of: /etc/ppp/options >>>> asyncmap 0 >>>> auth >>>> crtscts >>>> lock >>>> hide-password >>>> modem >>>> proxyarp >>>> lcp-echo-interval 30 >>>> lcp-echo-failure 4 >>>> noipx >>>> >>>> In case of a message like: >>>> Warning: Could not modify /etc/ppp/pap-secrets: Permission denied >>>> see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html >>>> >>>> For guidance on FAX usage, get from >>>> http://linmodems.technion.ac.il/packages/ get faxing.tar.gz >>>> It has samples for a modem using port /dev/ttySL0, which must be changed >>> to >>>> match your modem's port. >>>> >>>> Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 eth1 >>>> Which can interfere with Browser naviagation. >>>> >>>> Don't worry about the following, it is for experts should trouble >>> shooting >>>> be necessary. >>>> ========================================================== >>>> >>>> Checking for modem support lines: >>>> -------------------------------------- >>>> /device/modem symbolic link: lrwxrwxrwx 1 root root 12 8. Mär >>> 17:46 >>>> /dev/modem -> /dev/ttyAGS3 >>>> slmodemd created symbolic link /dev/ttySL0: >>>> Within /etc/udev/ files: >>>> >>>> Within /etc/modprobe.conf files: >>>> /etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2 >>>> /etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2 >>>> /etc/modprobe.d/alsa-base-blacklist.conf:# Uncomment these entries in >>> order >>>> to blacklist unwanted modem drivers >>>> /etc/modprobe.d/alsa-base-blacklist.conf:# blacklist snd-atiixp-modem >>>> /etc/modprobe.d/alsa-base-blacklist.conf:# blacklist snd-via82xx-modem >>>> Within any ancient /etc/devfs files: >>>> >>>> Within ancient kernel 2.4.n /etc/module.conf files: >>>> >>>> --------- end modem support lines -------- >>>> >>>> For Debian users, the linux-headers-2.6.32.6.deb can be used instead of >>>> kernel-source/ >>>> >>>> >>> >>> >> >> > >
Attachment:
signature.asc
Description: OpenPGP digital signature
