Martin
Going through the older exchanges, there is:
----------------
Nikolay Zhuravlev wrote:
Martin,
Unless you or somebody else really need it, I am not planning to add more
backward compatibility to the "7mdv" tarball than was originally
available in
the "4mdv" sources. I think "4mdv" didn't support the 2.6.26 kernel, while
"2mdv" did.
-----------------------------------
Thus to test our current code, it may be necessary to update to at
least a 2.6.28 kernel. Would that be feasible for you. Or perhaps
consider changing to another Linux distro, which is using current
kernels.
MarvS
n Sat, Feb 13, 2010 at 11:43 AM, Martin Lupcke
<mossianin_lbcmi@xxxxxxxxxx> wrote:
> The use of the 20090825 package sounded familiar, but I redownloaded the
> file and tried the same steps.
> As per the 1stReadMe.txt file in the 20090825 directory, I tried the 'make
> clean' command. That produced several lines with 'rm' at the beginning. rm
> -f *.a
> rm -f *~
> rm -f agrmodem.o
> rm -f agrmodem.ko
> rm -f agrmodem.mod.o
> rm -f agrmodem.mod.c
> rm -f agrserial.o
> rm -f agrserial.ko
> rm -f agrserial.mod.o
> rm -f agrserial.mod.c
> rm -f agrsoftmodem.o
> rm -f serial26.o
> rm -f HDA.o
> rm -f hda.o
> rm -f modules.order
> rm -f Module.symvers
> rm -f Module.markers
>
> I then tried the 'make install', but that produced a message about missing
> files shown below:
> ./agrinst
> Installing Agere Softmodem driver version 2.1.80-Red Flag NE 5.0
> some files needed for installation are missing
>
> Thanks.
>
>
>
> Marvin Stodolsky wrote:
>>
>> Martin,
>>
>> Per below the compile is successful on my System, for Ubuntu
>> 2.6.28-16-generic resources
>> Please try the preceding package agrsm06pci-2.1.80~20090825.tar.gz ,
>> in case there is a backward compatibilty issue for your 2.6.26.8.tex3
>> resources.
>>
>> MarvS
>> ==============
>> agrsm06pci-2.1.80~20100106# make
>> make -C /lib/modules/2.6.28-16-generic/build
>> M=/usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106 modules
>> make[1]: Entering directory `/usr/src/linux-headers-2.6.28-16-generic'
>> CC [M] /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/agrsoftmodem.o
>> /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/agrsoftmodem.c: In
>> function ‘x_linux_dbg_print_crit’:
>> /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/agrsoftmodem.c:349:
>> warning: the frame size of 1536 bytes is larger than 1024 bytes
>> /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/agrsoftmodem.c: In
>> function ‘x_linux_dbg_print’:
>> /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/agrsoftmodem.c:337:
>> warning: the frame size of 1536 bytes is larger than 1024 bytes
>> SHIPPED /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/agrmodemlib.o
>> CC [M] /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/hda.o
>> CC [M] /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/serial26.o
>> LD [M] /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/agrmodem.o
>> LD [M] /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/agrserial.o
>> Building modules, stage 2.
>> MODPOST 2 modules
>> WARNING: could not find
>> /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/.agrmodemlib.o.cmd
>> for /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/agrmodemlib.o
>> CC /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/agrmodem.mod.o
>> LD [M] /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/agrmodem.ko
>> CC
>> /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/agrserial.mod.o
>> LD [M] /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/agrserial.ko
>> make[1]: Leaving directory `/usr/src/linux-headers-2.6.28-16-generic'
>>
>> # ls -l *.ko
>> -rw-r--r-- 1 root staff 1683004 2010-02-12 19:44 agrmodem.ko
>> -rw-r--r-- 1 root staff 26169 2010-02-12 19:44 agrserial.ko
>> =========
>>
>> On Fri, Feb 12, 2010 at 8:03 PM, Martin Lupcke
>> <mossianin_lbcmi@xxxxxxxxxx> wrote:
>>
>>>
>>> I apologize for the delay, but here is what I did and the results.
>>>
>>> --I copied the tar to /usr/src and ran the tar command as noted below.
>>> --I cd to the new directory
>>> --I ran the make command and got the following message
>>> make -C /lib/modules/2.6.26.8.tex3/build
>>> M=/usr/src/agrsm06pci-2.1.80~20100106 modules
>>> make[1]: Entering directory `/usr/src/linux-2.6.26.8.tex3'
>>> CC [M] /usr/src/agrsm06pci-2.1.80~20100106/serial26.o
>>> /usr/src/agrsm06pci-2.1.80~20100106/serial26.c: In function
>>> ‘receive_chars’:
>>> /usr/src/agrsm06pci-2.1.80~20100106/serial26.c:1005: error: ‘struct
>>> uart_info’ has no member named ‘port’
>>> make[2]: *** [/usr/src/agrsm06pci-2.1.80~20100106/serial26.o] Error 1
>>> make[1]: *** [_module_/usr/src/agrsm06pci-2.1.80~20100106] Error 2
>>> make[1]: Leaving directory `/usr/src/linux-2.6.26.8.tex3'
>>> make: *** [default] Error 2
>>>
>>> I believe that message about "struct_uart_info" is the same that I got
>>> with
>>> an earlier attempt at this.
>>> The make install failed. I also tried the wvdialconf /etc/wvdial.conf
>>> and
>>> that failed with a message about not being able to detect the modem.
>>> I am not sure where this leaves the situation.
>>> Any feedback would be appreciated.
>>>
>>> Thanks.
>>>
>>>
>>> Marvin Stodolsky wrote:
>>>
>>>>
>>>> Martin,
>>>>
>>>> After compiling the drivers and installing.
>>>> Run the
>>>> agrsm-test
>>>>
>>>> if successfull, through the included wvdialconf test
>>>> gedit /etc/wvdial.conf
>>>> and try a dialout with:
>>>> $ sudo wvdial
>>>>
>>>> MarvS
>>>>
>>>> On Sun, Jan 10, 2010 at 3:21 PM, Martin Lupcke
>>>> <mossianin_lbcmi@xxxxxxxxxx> wrote:
>>>>
>>>>
>>>>>
>>>>> Thanks for the update. Because of my limited access to the machine, it
>>>>> will
>>>>> be a few weeks before I can check this. I will keep you posted as soon
>>>>> as I
>>>>> can.
>>>>> I do have a question now: After I cd agrsm08pci-2.1.80-20100106, am I
>>>>> correct in assuming you mean to use wvdial to attempt a connection?
>>>>>
>>>>>
>>>>> Marvin Stodolsky wrote:
>>>>>
>>>>>
>>>>>>
>>>>>> Martin,
>>>>>>
>>>>>> We have an update working on the 11c1:0620 chipset through kernels
>>>>>> 2.6.32
>>>>>> Please check on against your 11c1:0630 hardware.
>>>>>> Martin
>>>>>>
>>>>>> Within the /usr/src/ folder:
>>>>>> # tar zxf agrsm*.tar.gz
>>>>>> # cd agrsm06pci-2.1.80~20100106
>>>>>> Browse a while.
>>>>>>
>>>>>> Then run:
>>>>>> # ./postinst
>>>>>> and the DKMS system should do the rest of the install.
>>>>>>
>>>>>> Then proceed with modem tests.
>>>>>>
>>>>>> Report back to the list
>>>>>>
>>>>>> MarvS
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> On Sat, Dec 5, 2009 at 4:14 PM, Marvin Stodolsky
>>>>>> <marvin.stodolsky@xxxxxxxxx> wrote:
>>>>>>
>>>>>>
>>>>>>
>>>>>>>
>>>>>>> Martin,
>>>>>>>
>>>>>>> As yet, we don't have an update supporting 11c1:0620 and 11c1:0630
>>>>>>> chipsets
>>>>>>>
>>>>>>> MarvS
>>>>>>>
>>>>>>> On Sat, Dec 5, 2009 at 5:50 PM, Martin Lupcke
>>>>>>> <mossianin_lbcmi@xxxxxxxxxx> wrote:
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>>
>>>>>>>> I have been away for several days and was wondering if there is any
>>>>>>>> further
>>>>>>>> information available. I did some searching, but nothing related to
>>>>>>>> this
>>>>>>>> port error. Considering I would not know what I am looking for
>>>>>>>> anyway....
>>>>>>>>
>>>>>>>> Thanks.
>>>>>>>>
>>>>>>>>
>>>>>>>> Marvin Stodolsky wrote:
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>>
>>>>>>>>> re: > The deb file that Marv sent you is for Ubuntu systems and
>>>>>>>>> Not quite. Martin was working from the general tarball.
>>>>>>>>>
>>>>>>>>> Rather the lethal error is here:
>>>>>>>>> serial26.c:983: error: ‘struct uart_info’ has no member named
>>>>>>>>> ‘port’
>>>>>>>>> ---
>>>>>>>>> I remember an error of this sort in some other code.
>>>>>>>>> Will check into it further later.
>>>>>>>>>
>>>>>>>>> MarvS
>>>>>>>>>
>>>>>>>>> On Sat, Nov 28, 2009 at 5:50 PM, Antonio Olivares
>>>>>>>>> <olivares14031@xxxxxxxxx> wrote:
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Martin,
>>>>>>>>>>
>>>>>>>>>> I have achieved success with this 11c1:0620 chipset and Slax. I
>>>>>>>>>> have
>>>>>>>>>> a ready built module, if you are willing to get Slax and run from
>>>>>>>>>> livecd or usb (Slax 6.1.2) I can send you the lzm module.
>>>>>>>>>>
>>>>>>>>>> The deb file that Marv sent you is for Ubuntu systems and you are
>>>>>>>>>> installing it on PCLinuxOS and thus the failure. You might want
>>>>>>>>>> to
>>>>>>>>>> try and get the *.tar.gz equivalent file and try the build again.
>>>>>>>>>> If
>>>>>>>>>> you decide to do that, please post error messages that you might
>>>>>>>>>> get.
>>>>>>>>>>
>>>>>>>>>> If you decide to try Slax, let me know and I can email you the lzm
>>>>>>>>>> module and/or slax build script.
>>>>>>>>>>
>>>>>>>>>> Regards,
>>>>>>>>>>
>>>>>>>>>> Antonio
>>>>>>>>>>
>>>>>>>>>> On 11/28/09, Martin Lupcke <mossianin_lbcmi@xxxxxxxxxx> wrote:
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> First, Marvin, thank you for your patience with me and this
>>>>>>>>>>> situation.
>>>>>>>>>>>
>>>>>>>>>>> I checked the agrsm06pci-2.1.80-20090825 folder and the postinst
>>>>>>>>>>> file
>>>>>>>>>>> you mention does not exist. I moved that folder to the /usr/src
>>>>>>>>>>> and
>>>>>>>>>>> continued with your alternate commands.
>>>>>>>>>>>
>>>>>>>>>>> The first command (dkms add) worked successfully.
>>>>>>>>>>>
>>>>>>>>>>> The second command (dkms build) failed with the screen message
>>>>>>>>>>> Error! Bad return status for module build on kernel:
>>>>>>>>>>> 2.6.26.8.text3
>>>>>>>>>>> (i586)
>>>>>>>>>>> Consult the make.log in the build directory
>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/ for more
>>>>>>>>>>> information
>>>>>>>>>>>
>>>>>>>>>>> The contents of that log file are as follows:
>>>>>>>>>>>
>>>>>>>>>>> ==Begin make.log
>>>>>>>>>>> DKMS make.log for agrsm06pci-2.1.80-20090825 for kernel
>>>>>>>>>>> 2.6.26.8.tex3
>>>>>>>>>>> (i586)
>>>>>>>>>>> Sat Nov 28 18:25:04 EST 2009
>>>>>>>>>>> make: Entering directory `/usr/src/linux-2.6.26.8.tex3'
>>>>>>>>>>> LD
>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/built-in.o
>>>>>>>>>>> CC [M]
>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.o
>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c: In
>>>>>>>>>>> function ‘agr_pci_find_device’:
>>>>>>>>>>>
>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c:360:
>>>>>>>>>>> warning: ignoring return value of ‘pci_enable_device’, declared
>>>>>>>>>>> with
>>>>>>>>>>> attribute warn_unused_result
>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c: In
>>>>>>>>>>> function ‘x_pcibios_read_config_byte’:
>>>>>>>>>>>
>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c:388:
>>>>>>>>>>> warning: ‘pci_find_slot’ is deprecated (declared at
>>>>>>>>>>> include/linux/pci.h:516)
>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c: In
>>>>>>>>>>> function ‘x_pcibios_read_config_word’:
>>>>>>>>>>>
>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c:391:
>>>>>>>>>>> warning: ‘pci_find_slot’ is deprecated (declared at
>>>>>>>>>>> include/linux/pci.h:516)
>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c: In
>>>>>>>>>>> function ‘x_pcibios_read_config_dword’:
>>>>>>>>>>>
>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c:394:
>>>>>>>>>>> warning: ‘pci_find_slot’ is deprecated (declared at
>>>>>>>>>>> include/linux/pci.h:516)
>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c: In
>>>>>>>>>>> function ‘x_pcibios_write_config_byte’:
>>>>>>>>>>>
>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c:397:
>>>>>>>>>>> warning: ‘pci_find_slot’ is deprecated (declared at
>>>>>>>>>>> include/linux/pci.h:516)
>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c: In
>>>>>>>>>>> function ‘x_pcibios_write_config_word’:
>>>>>>>>>>>
>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c:400:
>>>>>>>>>>> warning: ‘pci_find_slot’ is deprecated (declared at
>>>>>>>>>>> include/linux/pci.h:516)
>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c: In
>>>>>>>>>>> function ‘x_pcibios_write_config_dword’:
>>>>>>>>>>>
>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c:403:
>>>>>>>>>>> warning: ‘pci_find_slot’ is deprecated (declared at
>>>>>>>>>>> include/linux/pci.h:516)
>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c: In
>>>>>>>>>>> function ‘x_task_queue_init’:
>>>>>>>>>>>
>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c:442:
>>>>>>>>>>> warning: assignment from incompatible pointer type
>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c: In
>>>>>>>>>>> function ‘x_task_queue_init_usb’:
>>>>>>>>>>>
>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c:454:
>>>>>>>>>>> warning: assignment from incompatible pointer type
>>>>>>>>>>> CC [M] /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.o
>>>>>>>>>>> In file included from
>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c:13:
>>>>>>>>>>> include/sound/driver.h:1:2: warning: #warning "This file is
>>>>>>>>>>> deprecated"
>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c:280:
>>>>>>>>>>> warning:
>>>>>>>>>>> function declaration isn’t a prototype
>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c:307:
>>>>>>>>>>> warning:
>>>>>>>>>>> function declaration isn’t a prototype
>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c:314:
>>>>>>>>>>> warning:
>>>>>>>>>>> function declaration isn’t a prototype
>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c: In function
>>>>>>>>>>> ‘LnxTransferCodecVerbs’:
>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c:323:
>>>>>>>>>>> warning:
>>>>>>>>>>> unused variable ‘CodecAddress’
>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c: In function
>>>>>>>>>>> ‘LnxTransferCodecVerbsWrite’:
>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c:344:
>>>>>>>>>>> warning:
>>>>>>>>>>> unused variable ‘CodecAddress’
>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c: In function
>>>>>>>>>>> ‘findHDACodec’:
>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c:282:
>>>>>>>>>>> warning:
>>>>>>>>>>> control reaches end of non-void function
>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c: In function
>>>>>>>>>>> ‘GetHDABaseAddress’:
>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c:280:
>>>>>>>>>>> warning:
>>>>>>>>>>> control reaches end of non-void function
>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c: In function
>>>>>>>>>>> ‘getHDAStream’:
>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c:279:
>>>>>>>>>>> warning:
>>>>>>>>>>> control reaches end of non-void function
>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c: In function
>>>>>>>>>>> ‘LnxTransferCodecVerbs’:
>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c:340:
>>>>>>>>>>> warning:
>>>>>>>>>>> ‘rvalue’ is used uninitialized in this function
>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c: In function
>>>>>>>>>>> ‘LnxTransferCodecVerbsWrite’:
>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c:361:
>>>>>>>>>>> warning:
>>>>>>>>>>> ‘rvalue’ is used uninitialized in this function
>>>>>>>>>>> CC [M]
>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/serial26.o
>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/serial26.c: In
>>>>>>>>>>> function
>>>>>>>>>>> ‘receive_chars’:
>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/serial26.c:983:
>>>>>>>>>>> error:
>>>>>>>>>>> ‘struct uart_info’ has no member named ‘port’
>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/serial26.c: In
>>>>>>>>>>> function
>>>>>>>>>>> ‘serial8250_startup’:
>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/serial26.c:1434:
>>>>>>>>>>> warning:
>>>>>>>>>>> assignment from incompatible pointer type
>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/serial26.c: In
>>>>>>>>>>> function
>>>>>>>>>>> ‘serial8250_set_termios’:
>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/serial26.c:1699:
>>>>>>>>>>> warning:
>>>>>>>>>>> passing argument 2 of ‘uart_get_baud_rate’ from incompatible
>>>>>>>>>>> pointer
>>>>>>>>>>> type
>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/serial26.c:1699:
>>>>>>>>>>> warning:
>>>>>>>>>>> passing argument 3 of ‘uart_get_baud_rate’ from incompatible
>>>>>>>>>>> pointer
>>>>>>>>>>> type
>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/serial26.c: At top
>>>>>>>>>>> level:
>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/serial26.c:2115:
>>>>>>>>>>> warning:
>>>>>>>>>>> initialization from incompatible pointer type
>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/serial26.c:2116:
>>>>>>>>>>> warning:
>>>>>>>>>>> initialization from incompatible pointer type
>>>>>>>>>>> /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/serial26.c:2123:
>>>>>>>>>>> warning:
>>>>>>>>>>> initialization from incompatible pointer type
>>>>>>>>>>> make[1]: ***
>>>>>>>>>>> [/var/lib/dkms/agrsm06pci/2.1.80-20090825/build/serial26.o]
>>>>>>>>>>> Error 1
>>>>>>>>>>> make: ***
>>>>>>>>>>> [_module_/var/lib/dkms/agrsm06pci/2.1.80-20090825/build]
>>>>>>>>>>> Error
>>>>>>>>>>> 2
>>>>>>>>>>> make: Leaving directory `/usr/src/linux-2.6.26.8.tex3'
>>>>>>>>>>> ==End make.log
>>>>>>>>>>>
>>>>>>>>>>> Can you offer any further help?
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Marvin Stodolsky wrote:
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> Martin
>>>>>>>>>>>>
>>>>>>>>>>>> This is a postinst file in your
>>>>>>>>>>>> /usr/src/agrsm06pci-2.1.80-20090825
>>>>>>>>>>>> folder
>>>>>>>>>>>> if the agrsm06pci-2.1.80-20090825 folder is not in /usr/src/ ,
>>>>>>>>>>>> move
>>>>>>>>>>>> it
>>>>>>>>>>>> there.
>>>>>>>>>>>>
>>>>>>>>>>>> Then with root permisssion, run
>>>>>>>>>>>> # ./postinst
>>>>>>>>>>>>
>>>>>>>>>>>> or alternately the following commands;
>>>>>>>>>>>> VER=2.1.80~20090825
>>>>>>>>>>>> dkms add -m agrsm06pci -v $VER
>>>>>>>>>>>> dkms build -m agrsm06pci -v $VER
>>>>>>>>>>>> dkms install -m agrsm06pci -v $VER
>>>>>>>>>>>>
>>>>>>>>>>>> If all successful
>>>>>>>>>>>> # agrsm-test
>>>>>>>>>>>>
>>>>>>>>>>>> When you upgade to a new kernel, the dksm will automatically
>>>>>>>>>>>> compile
>>>>>>>>>>>> the matching kernels.
>>>>>>>>>>>> provided that the linux-headers for the new kernel are also
>>>>>>>>>>>> installed.
>>>>>>>>>>>>
>>>>>>>>>>>> MarvS
>>>>>>>>>>>>
>>>>>>>>>>>> On Fri, Nov 27, 2009 at 10:36 AM, Martin Lupcke
>>>>>>>>>>>> <mossianin_lbcmi@xxxxxxxxxx> wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> Just to clarify, I am not sending these messages from the
>>>>>>>>>>>>> machine
>>>>>>>>>>>>> on
>>>>>>>>>>>>> which I
>>>>>>>>>>>>> am trying to install this driver. If I need to install
>>>>>>>>>>>>> anything,
>>>>>>>>>>>>> I
>>>>>>>>>>>>> have
>>>>>>>>>>>>> to
>>>>>>>>>>>>> be able to download from another machine and transfer via thumb
>>>>>>>>>>>>> drive,
>>>>>>>>>>>>> etc.
>>>>>>>>>>>>> Second, I just noticed that somehow the Ubuntu Linux got
>>>>>>>>>>>>> connected
>>>>>>>>>>>>> to
>>>>>>>>>>>>> this
>>>>>>>>>>>>> message and may be confusing. I am not running Ubuntu, I am
>>>>>>>>>>>>> running
>>>>>>>>>>>>> PCLinuxOS2009.
>>>>>>>>>>>>> I already downloaded the deb file you mentioned. When I try to
>>>>>>>>>>>>> install
>>>>>>>>>>>>> the
>>>>>>>>>>>>> driver with the dpkg command you provided earlier, I get a
>>>>>>>>>>>>> message
>>>>>>>>>>>>> about
>>>>>>>>>>>>> command not found. This is not making sense to me since it
>>>>>>>>>>>>> appears
>>>>>>>>>>>>> that
>>>>>>>>>>>>> the
>>>>>>>>>>>>> dkms is already installed, based on the list of packages
>>>>>>>>>>>>> installed
>>>>>>>>>>>>> in
>>>>>>>>>>>>> the
>>>>>>>>>>>>> Package Manager. All packages related to dkms are shown as
>>>>>>>>>>>>> installed.
>>>>>>>>>>>>> So, I am confused. I cannot install the dkms without a modem
>>>>>>>>>>>>> and
>>>>>>>>>>>>> I
>>>>>>>>>>>>> cannot
>>>>>>>>>>>>> install the modem driver without dkms. To top it off, it
>>>>>>>>>>>>> appears
>>>>>>>>>>>>> that
>>>>>>>>>>>>> dkms
>>>>>>>>>>>>> is already installed.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Is there a source for dkms that I can download from another
>>>>>>>>>>>>> mashine?
>>>>>>>>>>>>> I
>>>>>>>>>>>>> can
>>>>>>>>>>>>> try to reinstall dkms from that, if you think it would help.
>>>>>>>>>>>>> Thanks.
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> Marvin Stodolsky wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> agrsm06pci-2.1.80-20090825_i386.deb is at
>>>>>>>>>>>>>> http://linmodems.technion.ac.il/packages/ltmodem/11c11040/
>>>>>>>>>>>>>> but first install the dkms package, which will direct the
>>>>>>>>>>>>>> driver
>>>>>>>>>>>>>> compilation and installation.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> MarvS
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On Thu, Nov 26, 2009 at 7:28 PM, Martin Lupcke
>>>>>>>>>>>>>> <mossianin_lbcmi@xxxxxxxxxx> wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> I feel like I am missing something somewhere.
>>>>>>>>>>>>>>> I originally downloaded the file
>>>>>>>>>>>>>>> agrsm06pci-2.1.80-20090825.tar.gz.
>>>>>>>>>>>>>>> After
>>>>>>>>>>>>>>> unpacking, there are no *.deb files.
>>>>>>>>>>>>>>> So, I rechecked and found agrsm06pci-2.1.80-20090825_i386.deb
>>>>>>>>>>>>>>> which
>>>>>>>>>>>>>>> I
>>>>>>>>>>>>>>> just
>>>>>>>>>>>>>>> downloaded and tried to install with your directions. Now I
>>>>>>>>>>>>>>> get
>>>>>>>>>>>>>>> a
>>>>>>>>>>>>>>> "command
>>>>>>>>>>>>>>> not found" message when attempting to do the dpkg command you
>>>>>>>>>>>>>>> provided.
>>>>>>>>>>>>>>> As near as I can tell, the dkms is installed on the machine.
>>>>>>>>>>>>>>> I
>>>>>>>>>>>>>>> say
>>>>>>>>>>>>>>> that
>>>>>>>>>>>>>>> because all dkms-related items in the Package Manager
>>>>>>>>>>>>>>> (PCLinux2009)
>>>>>>>>>>>>>>> are
>>>>>>>>>>>>>>> listed as installed.
>>>>>>>>>>>>>>> I am beginning to think I am in a doom-loop. I cannot
>>>>>>>>>>>>>>> install
>>>>>>>>>>>>>>> the
>>>>>>>>>>>>>>> driver
>>>>>>>>>>>>>>> with dpkg, and I cannot connect to the internet to update any
>>>>>>>>>>>>>>> packages
>>>>>>>>>>>>>>> because dial-up is my only means of connecting.
>>>>>>>>>>>>>>> Any guidance would be appreciated.
>>>>>>>>>>>>>>> Thanks for your efforts.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Marvin Stodolsky wrote:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Martin,
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Don't use the agrinst. FIrst install the dkms package, if
>>>>>>>>>>>>>>>> you
>>>>>>>>>>>>>>>> haven't
>>>>>>>>>>>>>>>> already.
>>>>>>>>>>>>>>>> Then start the install with
>>>>>>>>>>>>>>>> $ sudo dpkg -i agrsm*.deb
>>>>>>>>>>>>>>>> and the dkms system will take over.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> With the agrsm-tools.deb package previously installed, then
>>>>>>>>>>>>>>>> run
>>>>>>>>>>>>>>>> $ sudo agrsm-test
>>>>>>>>>>>>>>>> for detection of your modem.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> MarvS
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> On Thu, Nov 26, 2009 at 3:57 PM, Martin Lupcke
>>>>>>>>>>>>>>>> <mossianin_lbcmi@xxxxxxxxxx> wrote:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> I used the "find" command as you provided and found two
>>>>>>>>>>>>>>>>> entries
>>>>>>>>>>>>>>>>> which
>>>>>>>>>>>>>>>>> I
>>>>>>>>>>>>>>>>> deleted. I then went to install the
>>>>>>>>>>>>>>>>> agrsm06pci-2.1.80-20090825
>>>>>>>>>>>>>>>>> and
>>>>>>>>>>>>>>>>> received
>>>>>>>>>>>>>>>>> the following results:
>>>>>>>>>>>>>>>>> ./agrinst
>>>>>>>>>>>>>>>>> Installing Agere Softmodem driver version 2.1.80-Red Flag
>>>>>>>>>>>>>>>>> NE
>>>>>>>>>>>>>>>>> 5.0
>>>>>>>>>>>>>>>>> some files needed for installation are missing
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> I stopped there and dropped this note for help.
>>>>>>>>>>>>>>>>> \Thanks.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Marvin Stodolsky wrote:
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Martin,
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> agrsm06pci-2.1.80~20090825.tar.gz is the only package
>>>>>>>>>>>>>>>>>> which
>>>>>>>>>>>>>>>>>> may
>>>>>>>>>>>>>>>>>> provide service for the 11c1:0630 chipset
>>>>>>>>>>>>>>>>>> Best check that multiple driver sets are not installed
>>>>>>>>>>>>>>>>>> somewhere:
>>>>>>>>>>>>>>>>>> $ find /lib/modules/$(uname -r) -name agr*.ko
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> If there are multiple. Best delete all and rerun the
>>>>>>>>>>>>>>>>>> agrsm06pci-2.1.80~20090825.tar.gz install.
>>>>>>>>>>>>>>>>>> If this was not the last installed delete all and rerun
>>>>>>>>>>>>>>>>>> the
>>>>>>>>>>>>>>>>>> agrsm06pci-2.1.80~20090825.tar.gz install
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> It is not clear from your message below as to whether the
>>>>>>>>>>>>>>>>>> wvdial
>>>>>>>>>>>>>>>>>> package is installed or not.
>>>>>>>>>>>>>>>>>> If not, from the bottom of
>>>>>>>>>>>>>>>>>> http://linmodems.technion.ac.il/packages/
>>>>>>>>>>>>>>>>>> get the wvdial_jaunty_i386.zip
>>>>>>>>>>>>>>>>>> Under Linux
>>>>>>>>>>>>>>>>>> $ unzip wv*.zip
>>>>>>>>>>>>>>>>>> $ cd wvdial_jaunty_i386
>>>>>>>>>>>>>>>>>> $ ls
>>>>>>>>>>>>>>>>>> install with
>>>>>>>>>>>>>>>>>> $ sudo dpkg -i *.deb
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Then rerun the
>>>>>>>>>>>>>>>>>> $ sudo agrsm-test
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> If successful, it will write a file /etc/wvdial.conf .
>>>>>>>>>>>>>>>>>> Edit
>>>>>>>>>>>>>>>>>> it
>>>>>>>>>>>>>>>>>> with:
>>>>>>>>>>>>>>>>>> $ sudo gedit /etc/wvdial.conf
>>>>>>>>>>>>>>>>>> putting in personal info while deleting symbols: < > ;
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Then try a dialout with:
>>>>>>>>>>>>>>>>>> $ sudo wvdial
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Upon a reboot the modem will be set up by:
>>>>>>>>>>>>>>>>>> $ sudo modprobe agrserial
>>>>>>>>>>>>>>>>>> You can check porsts with:
>>>>>>>>>>>>>>>>>> $ ls -l /dev/AGR* /dev/SAGR
>>>>>>>>>>>>>>>>>> and for driver loading:
>>>>>>>>>>>>>>>>>> $ lsmod | grep agr
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Once you are online under Linux install the dkms driver
>>>>>>>>>>>>>>>>>> update
>>>>>>>>>>>>>>>>>> utility
>>>>>>>>>>>>>>>>>> with:
>>>>>>>>>>>>>>>>>> $ sudo apt-get update
>>>>>>>>>>>>>>>>>> $ sudo apt-get install dkms
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> MarvS
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> On Sat, Oct 3, 2009 at 1:34 PM, Martin Lupcke
>>>>>>>>>>>>>>>>>> <mossianin_lbcmi@xxxxxxxxxx> wrote:
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Several weeks ago, I sent a message back that I had tried
>>>>>>>>>>>>>>>>>>> a
>>>>>>>>>>>>>>>>>>> couple
>>>>>>>>>>>>>>>>>>> of
>>>>>>>>>>>>>>>>>>> driver
>>>>>>>>>>>>>>>>>>> packages to get my 11c1:0630 modem working.
>>>>>>>>>>>>>>>>>>> Unfortunately,
>>>>>>>>>>>>>>>>>>> I
>>>>>>>>>>>>>>>>>>> have
>>>>>>>>>>>>>>>>>>> lost
>>>>>>>>>>>>>>>>>>> track since then. This is what I reported at that time.
>>>>>>>>>>>>>>>>>>> I attempted to install the "agrsm-2.1.80limited" driver.
>>>>>>>>>>>>>>>>>>> The
>>>>>>>>>>>>>>>>>>> results
>>>>>>>>>>>>>>>>>>> of
>>>>>>>>>>>>>>>>>>> the
>>>>>>>>>>>>>>>>>>> install are shown below:
>>>>>>>>>>>>>>>>>>> ./agrinst
>>>>>>>>>>>>>>>>>>> Installing Agere Softmodem driver version 2.1.80-Red
>>>>>>>>>>>>>>>>>>> Flag
>>>>>>>>>>>>>>>>>>> NE
>>>>>>>>>>>>>>>>>>> 5.0
>>>>>>>>>>>>>>>>>>> some files needed for installation are missing
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> For kicks, I ran the agrsm-test. The results of that are
>>>>>>>>>>>>>>>>>>> listed
>>>>>>>>>>>>>>>>>>> below:
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Loading drivers:
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Drivers loaded:
>>>>>>>>>>>>>>>>>>> agrserial 11088 0
>>>>>>>>>>>>>>>>>>> agrmodem 1184932 1 agrserial
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> and symbolic link created:
>>>>>>>>>>>>>>>>>>> lrwxrwxrwx 1 root root 12 Sep 5 18:40 /dev/ttySAGR ->
>>>>>>>>>>>>>>>>>>> /dev/ttyAGS3
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Checking for utility wvdialconf
>>>>>>>>>>>>>>>>>>> Found /usr/bin/wvdialconf, preparing to run:
>>>>>>>>>>>>>>>>>>> wvdialconf /etc/wvdial.conf
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> A reboot may be necessary before modem detection
>>>>>>>>>>>>>>>>>>> through:
>>>>>>>>>>>>>>>>>>> sudo modprobe agrserial
>>>>>>>>>>>>>>>>>>> Which will load agrmodem, agrserial and create the
>>>>>>>>>>>>>>>>>>> symbolic
>>>>>>>>>>>>>>>>>>> link
>>>>>>>>>>>>>>>>>>> needed
>>>>>>>>>>>>>>>>>>> for:
>>>>>>>>>>>>>>>>>>> sudo wvdialconf
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> I also tried to install the "agrsm06pci-2.1.80~20090825"
>>>>>>>>>>>>>>>>>>> with
>>>>>>>>>>>>>>>>>>> the
>>>>>>>>>>>>>>>>>>> same
>>>>>>>>>>>>>>>>>>> result as above.
>>>>>>>>>>>>>>>>>>> Can you walk me thru what needs to be done now?
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Thanks for all the help.
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Jacques Goldberg wrote:
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> DONE but Martin the complete URL is
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> http://linmodems.technion.ac.il/packages/ltmodem/11c11040/agrsm06pci-2.1.80~20090825.tar.gz
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> not just agrsm.tar.gz (as quoted by Marv just to show
>>>>>>>>>>>>>>>>>>>> how
>>>>>>>>>>>>>>>>>>>> one
>>>>>>>>>>>>>>>>>>>> unpacks
>>>>>>>>>>>>>>>>>>>> such
>>>>>>>>>>>>>>>>>>>> a kind of file).
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Jacques
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Marvin Stodolsky wrote:
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> Martin
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> Attached is the tarball packaging.
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> # tar zxvf agrsm.tar.gz
>>>>>>>>>>>>>>>>>>>>> and see the 1stReadme.txt therein.
>>>>>>>>>>>>>>>>>>>>> If you are not using the Deb installer previously sent,
>>>>>>>>>>>>>>>>>>>>> the best place to unpack it is in /usr/src/ to
>>>>>>>>>>>>>>>>>>>>> potentially
>>>>>>>>>>>>>>>>>>>>> enable
>>>>>>>>>>>>>>>>>>>>> the
>>>>>>>>>>>>>>>>>>>>> dkms support.
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> Jacques,
>>>>>>>>>>>>>>>>>>>>> put in the 11c11040 folder please.
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> MarvS
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> On Sat, Aug 29, 2009 at 7:24 PM, Marvin
>>>>>>>>>>>>>>>>>>>>> Stodolsky<marvin.stodolsky@xxxxxxxxx> wrote:
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> http://linmodems.technion.ac.il/packages/ltmodem11c11040/
>>>>>>>>>>>>>>>>>>>>>> is the correct address, but the server seems to be
>>>>>>>>>>>>>>>>>>>>>> offline
>>>>>>>>>>>>>>>>>>>>>> now.
>>>>>>>>>>>>>>>>>>>>>> This happens occassional
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> John
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> http://linmodems.technion.ac.il/packages/ltmodem/11c11040/
>>>>>>>>>>>>>>>>>>>>>> is
>>>>>>>>>>>>>>>>>>>>>> the
>>>>>>>>>>>>>>>>>>>>>> correct address. I'll also send you the Debian
>>>>>>>>>>>>>>>>>>>>>> installer
>>>>>>>>>>>>>>>>>>>>>> variant
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> MarvS
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> On Sat, Aug 29, 2009 at 5:21 PM, Martin
>>>>>>>>>>>>>>>>>>>>>> Lupcke<mossianin_lbcmi@xxxxxxxxxx> wrote:
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> I have been trying to follow the recent messages on
>>>>>>>>>>>>>>>>>>>>>>> the
>>>>>>>>>>>>>>>>>>>>>>> 11c1:0620
>>>>>>>>>>>>>>>>>>>>>>> &
>>>>>>>>>>>>>>>>>>>>>>> 0630
>>>>>>>>>>>>>>>>>>>>>>> modems. On the 24th, Jacques put a file at
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> http://linmodems.technion.ac.il/packages/ltmodem11c11040/agrsm-2.1.80-limited.tar.gz
>>>>>>>>>>>>>>>>>>>>>>> but I cannot find it. (The path 11c11040 does not
>>>>>>>>>>>>>>>>>>>>>>> appear
>>>>>>>>>>>>>>>>>>>>>>> to
>>>>>>>>>>>>>>>>>>>>>>> exist.)
>>>>>>>>>>>>>>>>>>>>>>> Later, it seems like there were additional steps to
>>>>>>>>>>>>>>>>>>>>>>> install
>>>>>>>>>>>>>>>>>>>>>>> this,
>>>>>>>>>>>>>>>>>>>>>>> but
>>>>>>>>>>>>>>>>>>>>>>> I got
>>>>>>>>>>>>>>>>>>>>>>> totally lost trying to determine what should or
>>>>>>>>>>>>>>>>>>>>>>> should
>>>>>>>>>>>>>>>>>>>>>>> not
>>>>>>>>>>>>>>>>>>>>>>> be
>>>>>>>>>>>>>>>>>>>>>>> done.
>>>>>>>>>>>>>>>>>>>>>>> Most
>>>>>>>>>>>>>>>>>>>>>>> recently (below), it seems that John got an 0620
>>>>>>>>>>>>>>>>>>>>>>> working
>>>>>>>>>>>>>>>>>>>>>>> in
>>>>>>>>>>>>>>>>>>>>>>> Ubuntu.
>>>>>>>>>>>>>>>>>>>>>>> I am far from a Linux expert (obviously), but could
>>>>>>>>>>>>>>>>>>>>>>> someone
>>>>>>>>>>>>>>>>>>>>>>> help
>>>>>>>>>>>>>>>>>>>>>>> clear
>>>>>>>>>>>>>>>>>>>>>>> this
>>>>>>>>>>>>>>>>>>>>>>> up for me so I can try to get my 0630 working in
>>>>>>>>>>>>>>>>>>>>>>> PCLinux?
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> Thanks.
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> john31608@xxxxxxxxxx wrote:
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> Marvin:
>>>>>>>>>>>>>>>>>>>>>>>> I want you to know I have the agere SV92PP 11c10620
>>>>>>>>>>>>>>>>>>>>>>>> modem
>>>>>>>>>>>>>>>>>>>>>>>> card
>>>>>>>>>>>>>>>>>>>>>>>> now
>>>>>>>>>>>>>>>>>>>>>>>> running reliably. I went with a fresh reinstall of
>>>>>>>>>>>>>>>>>>>>>>>> Ubuntu9.04
>>>>>>>>>>>>>>>>>>>>>>>> Jaunty
>>>>>>>>>>>>>>>>>>>>>>>> and
>>>>>>>>>>>>>>>>>>>>>>>> installation of the following:
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> agrsm-tools_0.0.1_all.deb
>>>>>>>>>>>>>>>>>>>>>>>> dkms_2.0.21.1-Oubuntu3_all.deb
>>>>>>>>>>>>>>>>>>>>>>>> gnome-network-admin-2.22.1-Oubuntu1_i386.deb
>>>>>>>>>>>>>>>>>>>>>>>> Dial-up with jauntyDebs.tar.Izima This is a package
>>>>>>>>>>>>>>>>>>>>>>>> consisting
>>>>>>>>>>>>>>>>>>>>>>>> of
>>>>>>>>>>>>>>>>>>>>>>>> wvdial
>>>>>>>>>>>>>>>>>>>>>>>> with dependencies
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> Finally agrsm06pci_2.1.80~20090825_i386.deb
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> It was all double click and go with installation of
>>>>>>>>>>>>>>>>>>>>>>>> agrmodem.ko
>>>>>>>>>>>>>>>>>>>>>>>> and
>>>>>>>>>>>>>>>>>>>>>>>> agrserial.ko to
>>>>>>>>>>>>>>>>>>>>>>>> /lib/modules/2.6.28-11-generic/updates/dkms
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> It looks like at this point from the terminal sudo
>>>>>>>>>>>>>>>>>>>>>>>> agrsm-test
>>>>>>>>>>>>>>>>>>>>>>>> would
>>>>>>>>>>>>>>>>>>>>>>>> have taken me to completion save for entering my
>>>>>>>>>>>>>>>>>>>>>>>> name,
>>>>>>>>>>>>>>>>>>>>>>>> password
>>>>>>>>>>>>>>>>>>>>>>>> and
>>>>>>>>>>>>>>>>>>>>>>>> phone
>>>>>>>>>>>>>>>>>>>>>>>> number in ./etc/wvdial.conf. Everything is spelled
>>>>>>>>>>>>>>>>>>>>>>>> out
>>>>>>>>>>>>>>>>>>>>>>>> as
>>>>>>>>>>>>>>>>>>>>>>>> you
>>>>>>>>>>>>>>>>>>>>>>>> go
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> I had tried after running
>>>>>>>>>>>>>>>>>>>>>>>> agrsm06pci_2.1.80~20090825_i386.deb
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> sudo modprobe agrmodem
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> sudo modprobe agrserial
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> etc, etc using the page "LSI/AgereSystems 11c11040
>>>>>>>>>>>>>>>>>>>>>>>> chipset
>>>>>>>>>>>>>>>>>>>>>>>> support
>>>>>>>>>>>>>>>>>>>>>>>> installation ,using dkms tools" from the Linmodems
>>>>>>>>>>>>>>>>>>>>>>>> discussion
>>>>>>>>>>>>>>>>>>>>>>>> board
>>>>>>>>>>>>>>>>>>>>>>>> of
>>>>>>>>>>>>>>>>>>>>>>>> 20DEC2008 as a guide but I got lost trying to find
>>>>>>>>>>>>>>>>>>>>>>>> the
>>>>>>>>>>>>>>>>>>>>>>>> file
>>>>>>>>>>>>>>>>>>>>>>>> wvtest.
>>>>>>>>>>>>>>>>>>>>>>>> sudo
>>>>>>>>>>>>>>>>>>>>>>>> agrsm-test rescued me. The modem was found on
>>>>>>>>>>>>>>>>>>>>>>>> /dev/ttySAGR.
>>>>>>>>>>>>>>>>>>>>>>>> While
>>>>>>>>>>>>>>>>>>>>>>>> trying
>>>>>>>>>>>>>>>>>>>>>>>> to configure the network tools point to point
>>>>>>>>>>>>>>>>>>>>>>>> connection
>>>>>>>>>>>>>>>>>>>>>>>> interface
>>>>>>>>>>>>>>>>>>>>>>>> I
>>>>>>>>>>>>>>>>>>>>>>>> lost
>>>>>>>>>>>>>>>>>>>>>>>> the connection and it appears the file /dev/ttySAGR
>>>>>>>>>>>>>>>>>>>>>>>> was
>>>>>>>>>>>>>>>>>>>>>>>> lost
>>>>>>>>>>>>>>>>>>>>>>>> but
>>>>>>>>>>>>>>>>>>>>>>>> sudo
>>>>>>>>>>>>>>>>>>>>>>>> agrsm-test brought it right back. I then had to
>>>>>>>>>>>>>>>>>>>>>>>> reenter
>>>>>>>>>>>>>>>>>>>>>>>> my
>>>>>>>>>>>>>>>>>>>>>>>> name,
>>>>>>>>>>>>>>>>>>>>>>>> phone
>>>>>>>>>>>>>>>>>>>>>>>> and
>>>>>>>>>>>>>>>>>>>>>>>> PW but it all went pretty smoothly. My hat is off
>>>>>>>>>>>>>>>>>>>>>>>> to
>>>>>>>>>>>>>>>>>>>>>>>> you
>>>>>>>>>>>>>>>>>>>>>>>> and
>>>>>>>>>>>>>>>>>>>>>>>> the
>>>>>>>>>>>>>>>>>>>>>>>> others
>>>>>>>>>>>>>>>>>>>>>>>> who
>>>>>>>>>>>>>>>>>>>>>>>> have been so patient with all this. Thank You
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> Yours truly, John W
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>
>>>>
>>
>>
>
