Βασίλης
Congratulations,
It is good to know of a successful usage of slmodemd under 2.6.31, and
particularly in Greece where Jin is having problems too.
Though your systems are different in that you are using the
snd-intel8x0m driver for your hardware, while Jin's modem chip is
hosted on a HD Audio card and uses the snd-hda-intel combined
audio+modem driver.
RE:
[[do installations like the 2.6.28 (or anything that you install) make
the system slower? should i remove them, uninstall them? --and how?]]
----------------
No there is no effect of having additional kernels on board, except
for their storage space.
During any single bootup, a single kernel plus its own modules are
sole in control.
I'll send you instructions later on who to display the 2.6.28 kernel choices.
MarvS
2010/2/2 Βασίλης <piperastaman@xxxxxxxxxxxxxx>:
> I installed through synaptics the "StartUp-Manager" in order to check
> if other boot possibilities are available - since i don't know how to
> do this over a terminal.
> i send you a foto<*> of what is shown - does this mean that the
> 3-different-links
>
> {{{In seems you will need the 2.6.28-16-generic headers for nvidia
> support so start at:
> http://packages.ubuntu.com/jaunty/linux-headers-2.6.28-16
> http://packages.ubuntu.com/jaunty/linux-headers-2.6.28-16-generic
> http://packages.ubuntu.com/jaunty/linux-image-2.6.28-16-generic
> and run through the installs
> During the last redo, there may be a y/N choice to regenerate "menu.list".
>
> ###as i mentioned, there wasn't any such possibility
>
> Choose y , then see if the 2.6.28-16-generic choice appears during
> the bootup.}}}
>
> installation i did is not visible or that it did not get installed enough(!)
> or : what would the terminal command be? - so that one can be really sure
>
> {but, according to the StartUp-Manager, this is a dial-up connection
> with 2.6.31-17 :-) }
>
> [[do installations like the 2.6.28 (or anything that you install) make
> the system slower? should i remove them, uninstall them? --and how?]]
>
> <*> when i roll down the window:
> 1) i only see the 2.6.31-17-generic.pae, its recovery mode and two memtests
> 2) i cannot take a print screen...
>
> 2010/2/2, Βασίλης <piperastaman@xxxxxxxxxxxxxx>:
>> marviiiin!
>> wanted to make sure in the village!
>> and behold!
>>
>>
>> basilis@basilis-laptop:~$ sudo modprobe -r snd-intel8x0m
>> [sudo] password for basilis:
>> basilis@basilis-laptop:~$ sudo modprobe snd-intel8x0m
>> basilis@basilis-laptop:~$ sudo slmodemd -c GREECE --alsa modem:1
>> SmartLink Soft Modem: version 2.9.11 Dec 3 2009 16:59:30
>> symbolic link `/dev/ttySL0' -> `/dev/pts/1' created.
>> modem `modem:1' created. TTY is `/dev/pts/1'
>> Use `/dev/ttySL0' as modem device, Ctrl+C for termination.
>>
>> basilis@basilis-laptop:~$ sudo wvdial
>> [sudo] password for basilis:
>> --> WvDial: Internet dialer version 1.60
>> --> Cannot get information for serial port.
>> --> Initializing modem.
>> --> Sending: ATZ
>> ATZ
>> OK
>> --> Sending: ATQ0 V1 E1 S0=0 X3 &C1 &D2 +FCLASS=0
>> ATQ0 V1 E1 S0=0 X3 &C1 &D2 +FCLASS=0
>> OK
>> --> Modem initialized.
>> --> Sending: ATDT8962514140
>> --> Waiting for carrier.
>> ATDT8962514140
>> CONNECT 50667
>> You have entered dc-das01.netone.gr on line 55
>> ()
>> User Access Verification
>> Username:
>> --> Carrier detected. Starting PPP immediately.
>> --> Starting pppd at Tue Feb 2 15:23:54 2010
>> --> Pid of pppd: 1693
>> --> Using interface ppp0
>> --> pppd: (u� @s�
>> --> pppd: (u� @s�
>> --> pppd: (u� @s�
>> --> pppd: (u� @s�
>> --> pppd: (u� @s�
>> --> local IP address 212.107.27.34
>> --> pppd: (u� @s�
>> --> remote IP address 212.107.0.18
>> --> pppd: (u� @s�
>> --> primary DNS address 77.83.1.101
>> --> pppd: (u� @s�
>> --> secondary DNS address 77.83.1.102
>> --> pppd: (u� @s�
>> --> pppd: (u� @s�
>> --> pppd: (u� @s�
>> --> Connect time 4.0 minutes.
>> --> pppd: (u� @s�
>> --> pppd: (u� @s�
>> --> pppd: (u� @s�
>> --> Disconnecting at Tue Feb 2 15:27:59 2010
>> --> The PPP daemon has died: Lack of LCP echo responses (exit code = 15)
>> --> man pppd explains pppd error codes in more detail.
>> --> I guess that's it for now, exiting
>> --> Provider is overloaded(often the case) or line problem.
>> --> The PPP daemon has died. (exit code = 15)
>> basilis@basilis-laptop:~$
>>
>> ##then again:
>> basilis@basilis-laptop:~$ sudo modprobe -r snd-intel8x0m
>> basilis@basilis-laptop:~$ sudo modprobe snd-intel8x0m
>> basilis@basilis-laptop:~$ sudo slmodemd -c GREECE --alsa modem:1
>> SmartLink Soft Modem: version 2.9.11 Dec 3 2009 16:59:30
>> symbolic link `/dev/ttySL0' -> `/dev/pts/1' created.
>> modem `modem:1' created. TTY is `/dev/pts/1'
>> Use `/dev/ttySL0' as modem device, Ctrl+C for termination.
>>
>> ##and
>>
>> basilis@basilis-laptop:~$ sudo wvdial
>> --> WvDial: Internet dialer version 1.60
>> --> Cannot get information for serial port.
>> --> Initializing modem.
>> --> Sending: ATZ
>> ATZ
>> OK
>> --> Sending: ATQ0 V1 E1 S0=0 X3 &C1 &D2 +FCLASS=0
>> ATQ0 V1 E1 S0=0 X3 &C1 &D2 +FCLASS=0
>> OK
>> --> Modem initialized.
>> --> Sending: ATDT8962514140
>> --> Waiting for carrier.
>> ATDT8962514140
>> CONNECT 49333
>> You have entered dc-das01.netone.gr on line 6
>> ()
>> User Access Verification
>> Username:
>> --> Carrier detected. Starting PPP immediately.
>> --> Starting pppd at Tue Feb 2 15:32:23 2010
>> --> Pid of pppd: 1970
>> --> Using interface ppp0
>> --> pppd: (Ň[08]@Ç[08]
>> --> pppd: (Ň[08]@Ç[08]
>> --> pppd: (Ň[08]@Ç[08]
>> --> pppd: (Ň[08]@Ç[08]
>> --> local IP address 212.107.27.34
>> --> pppd: (Ň[08]@Ç[08]
>> --> remote IP address 212.107.0.18
>> --> pppd: (Ň[08]@Ç[08]
>> --> primary DNS address 77.83.1.101
>> --> pppd: (Ň[08]@Ç[08]
>> --> secondary DNS address 77.83.1.102
>> --> pppd: (Ň[08]@Ç[08]
>>
>> ##and still connected...
>>
>> --> Connect time 18.0 minutes.
>> --> pppd: (Ň[08]@Ç[08]
>> --> pppd: (Ň[08]@Ç[08]
>> --> pppd: (Ň[08]@Ç[08]
>> --> Disconnecting at Tue Feb 2 15:50:27 2010
>> --> The PPP daemon has died: Lack of LCP echo responses (exit code = 15)
>> --> man pppd explains pppd error codes in more detail.
>> --> I guess that's it for now, exiting
>> --> Provider is overloaded(often the case) or line problem.
>> --> The PPP daemon has died. (exit code = 15)
>> basilis@basilis-laptop:~$
>>
>> ##crap ! even though i was typing an email to you asking you what you
>> want me to ##do in order 1) to understand if this was a success under
>> 2.6.31 or 2)if it was ##a boot under 2.6.28 without me knowing it and
>> 3)see what possibilities there
>> ##are to improve it ,
>> ##it got disconnected again...
>>
>> now i send it!!!
>>
>> 2010/2/1, Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx>:
>>> There is a file /etc/default/grub
>>> Mine is attached. Under Ubuntu in your personal folder do:
>>> $ unzip grub.gz
>>> You can browse it:
>>> $ less grub
>>> Then
>>> $ sudo mv /etc/default/grub /etc/default/grub.old
>>> $ sudo cp grub /etc/default/grub
>>>
>>> A new bootup instruction should now be generated by:
>>> $ sudo update-grub
>>> Reboot
>>> There should be kernel choices.
>>>
>>> MarvS
>>>
>>> 2010/2/1 Βασίλης <piperastaman@xxxxxxxxxxxxxx>:
>>>> NO bootup choices whatsoever - the boot happens with me having no
>>>> choices...
>>>> which testing? the last test i sent you was after the last installs, but
>>>> i
>>>> couldn't boot from anything else other than the one the computer
>>>> chose...
>>>>
>>>>
>>>> Στις 01 Φεβρουαρίου 2010 3:02 π.μ., ο χρήστης Marvin Stodolsky
>>>> <marvin.stodolsky@xxxxxxxxx> έγραψε:
>>>>>
>>>>> RE: 2.6.28-16-generic
>>>>> Was this Now available as a bootup choice?
>>>>> Was the testing done under 2.6.28-16-generic?
>>>>>
>>>>> Also there was be a DSL filter out, that the modem output line connects
>>>>> to.
>>>>>
>>>>> MarvS
>>>>>
>>>>> 2010/1/31 Βασίλης <piperastaman@xxxxxxxxxxxxxx>:
>>>>> > ##installed all you told me, menu.lst looks like this:
>>>>> >
>>>>> > ## ## End Default Options ##
>>>>> >
>>>>> > title Ubuntu 9.10, kernel 2.6.31-17-generic-pae
>>>>> > uuid 7c135e5b-23cc-4f3a-a577-adf25f48b3e4
>>>>> > kernel /boot/vmlinuz-2.6.31-17-generic-pae
>>>>> > root=UUID=7c135e5b-23cc-4f3a-a577-adf25f48b3e4 ro quiet splash
>>>>> > initrd /boot/initrd.img-2.6.31-17-generic-pae
>>>>> >
>>>>> > title Ubuntu 9.10, kernel 2.6.31-17-generic-pae (recovery
>>>>> > mode)
>>>>> > uuid 7c135e5b-23cc-4f3a-a577-adf25f48b3e4
>>>>> > kernel /boot/vmlinuz-2.6.31-17-generic-pae
>>>>> > root=UUID=7c135e5b-23cc-4f3a-a577-adf25f48b3e4 ro single
>>>>> > initrd /boot/initrd.img-2.6.31-17-generic-pae
>>>>> >
>>>>> > title Ubuntu 9.10, kernel 2.6.28-16-generic
>>>>> > uuid 7c135e5b-23cc-4f3a-a577-adf25f48b3e4
>>>>> > kernel /boot/vmlinuz-2.6.28-16-generic
>>>>> > root=UUID=7c135e5b-23cc-4f3a-a577-adf25f48b3e4 ro quiet splash
>>>>> > initrd /boot/initrd.img-2.6.28-16-generic
>>>>> >
>>>>> > title Ubuntu 9.10, kernel 2.6.28-16-generic (recovery mode)
>>>>> > uuid 7c135e5b-23cc-4f3a-a577-adf25f48b3e4
>>>>> > kernel /boot/vmlinuz-2.6.28-16-generic
>>>>> > root=UUID=7c135e5b-23cc-4f3a-a577-adf25f48b3e4 ro single
>>>>> > initrd /boot/initrd.img-2.6.28-16-generic
>>>>> >
>>>>> > title Chainload into GRUB 2
>>>>> > root 7c135e5b-23cc-4f3a-a577-adf25f48b3e4
>>>>> > kernel /boot/grub/core.img
>>>>> >
>>>>> > title Ubuntu 9.10, memtest86+
>>>>> > uuid 7c135e5b-23cc-4f3a-a577-adf25f48b3e4
>>>>> > kernel /boot/memtest86+.bin
>>>>> >
>>>>> > ### END DEBIAN AUTOMAGIC KERNELS LIST
>>>>> >
>>>>> >
>>>>> >
>>>>> > ##the same isn't it?
>>>>> > ##no question with y/n
>>>>> > ##no possibility to boot to anything different than what is
>>>>> > predecided...
>>>>> >
>>>>> > ##result still:
>>>>> > basilis@basilis-laptop:~$ sudo wvdial
>>>>> > [sudo] password for basilis:
>>>>> > --> WvDial: Internet dialer version 1.60
>>>>> > --> Cannot get information for serial port.
>>>>> > --> Initializing modem.
>>>>> > --> Sending: ATZ
>>>>> > ATZ
>>>>> > OK
>>>>> > --> Sending: ATQ0 V1 E1 S0=0 X3 &C1 &D2 +FCLASS=0
>>>>> > ATQ0 V1 E1 S0=0 X3 &C1 &D2 +FCLASS=0
>>>>> > OK
>>>>> > --> Modem initialized.
>>>>> > --> Sending: ATDT8962514140
>>>>> > --> Waiting for carrier.
>>>>> > ATDT8962514140
>>>>> > NO DIALTONE
>>>>> > --> No dial tone.
>>>>> > --> Disconnecting at Mon Feb 1 02:41:04 2010
>>>>> > basilis@basilis-laptop:~$
>>>>> >
>>>>> >
>>>>> > ##going back to the village - no internet in my house there; as soon
>>>>> > as i get to
>>>>> > ##an internet access i will check again for possible advices of
>>>>> > yours...
>>>>> >
>>>>> > 2010/2/1, Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx>:
>>>>> >> RE: ##how do i make it shown and choosable though...
>>>>> >> Damn!!
>>>>> >> Hoped that the grub reinstall/update would take care of that.
>>>>> >> This is a bug accompanying the legacy Grub -> Grub2 transistion
>>>>> >> Will have figure out/remember how I did that myself.
>>>>> >> My own System is karmic but using the 2.6.28-16-generic,
>>>>> >> because on this MacBooK hardware the mouse pad is too sensitive
>>>>> >> under
>>>>> >> 2.6.31 kernels
>>>>> >>
>>>>> >> In seems you will need the 2.6.28-16-generic headers for nvidia
>>>>> >> support so start at:
>>>>> >> http://packages.ubuntu.com/jaunty/linux-headers-2.6.28-16
>>>>> >> http://packages.ubuntu.com/jaunty/linux-headers-2.6.28-16-generic
>>>>> >> http://packages.ubuntu.com/jaunty/linux-image-2.6.28-16-generic
>>>>> >> and run through the installs
>>>>> >> During the last redo, there may be a y/N choice to regenerate
>>>>> >> "menu.list".
>>>>> >> Choose y , then see if the 2.6.28-16-generic choice appears during
>>>>> >> the
>>>>> >> bootup.
>>>>> >>
>>>>> >> MarvS
>>>>> >>
>>>>> >>
>>>>> >>
>>>>> >> 2010/1/31 Βασίλης <piperastaman@xxxxxxxxxxxxxx>:
>>>>> >>> ##on restart could not chose... i checked - and saw it's there;
>>>>> >>> ##how do i make it shown and choosable though...
>>>>> >>>
>>>>> >>> basilis@basilis-laptop:~$ sudo gedit /boot/grub/menu.lst
>>>>> >>> [sudo] password for basilis:
>>>>> >>> ## ## End Default Options ##
>>>>> >>>
>>>>> >>> title Ubuntu 9.10, kernel 2.6.31-17-generic-pae
>>>>> >>> uuid 7c135e5b-23cc-4f3a-a577-adf25f48b3e4
>>>>> >>> kernel /boot/vmlinuz-2.6.31-17-generic-pae
>>>>> >>> root=UUID=7c135e5b-23cc-4f3a-a577-adf25f48b3e4 ro quiet splash
>>>>> >>> initrd /boot/initrd.img-2.6.31-17-generic-pae
>>>>> >>>
>>>>> >>> title Ubuntu 9.10, kernel 2.6.31-17-generic-pae (recovery
>>>>> >>> mode)
>>>>> >>> uuid 7c135e5b-23cc-4f3a-a577-adf25f48b3e4
>>>>> >>> kernel /boot/vmlinuz-2.6.31-17-generic-pae
>>>>> >>> root=UUID=7c135e5b-23cc-4f3a-a577-adf25f48b3e4 ro single
>>>>> >>> initrd /boot/initrd.img-2.6.31-17-generic-pae
>>>>> >>>
>>>>> >>> title Ubuntu 9.10, kernel 2.6.28-16-generic
>>>>> >>> uuid 7c135e5b-23cc-4f3a-a577-adf25f48b3e4
>>>>> >>> kernel /boot/vmlinuz-2.6.28-16-generic
>>>>> >>> root=UUID=7c135e5b-23cc-4f3a-a577-adf25f48b3e4 ro quiet splash
>>>>> >>> initrd /boot/initrd.img-2.6.28-16-generic
>>>>> >>>
>>>>> >>> title Ubuntu 9.10, kernel 2.6.28-16-generic (recovery
>>>>> >>> mode)
>>>>> >>> uuid 7c135e5b-23cc-4f3a-a577-adf25f48b3e4
>>>>> >>> kernel /boot/vmlinuz-2.6.28-16-generic
>>>>> >>> root=UUID=7c135e5b-23cc-4f3a-a577-adf25f48b3e4 ro single
>>>>> >>> initrd /boot/initrd.img-2.6.28-16-generic
>>>>> >>>
>>>>> >>> title Chainload into GRUB 2
>>>>> >>> root 7c135e5b-23cc-4f3a-a577-adf25f48b3e4
>>>>> >>> kernel /boot/grub/core.img
>>>>> >>>
>>>>> >>> title Ubuntu 9.10, memtest86+
>>>>> >>> uuid 7c135e5b-23cc-4f3a-a577-adf25f48b3e4
>>>>> >>> kernel /boot/memtest86+.bin
>>>>> >>>
>>>>> >>> ### END DEBIAN AUTOMAGIC KERNELS LIST
>>>>> >>>
>>>>> >>> 2010/1/31, Βασίλης <piperastaman@xxxxxxxxxxxxxx>:
>>>>> >>>> i first send you the fotos of the procedure - this [fail] thing at
>>>>> >>>> the
>>>>> >>>> bottom... what was that?
>>>>> >>>> and: when i restarted i couldn't see any grub-possibility to boot
>>>>> >>>> with
>>>>> >>>> the
>>>>> >>>> 2.6.28... it directly entered
>>>>> >>>>
>>>>> >>>> Στις 31 Ιανουαρίου 2010 11:24 μ.μ., ο χρήστης Βασίλης <
>>>>> >>>> piperastaman@xxxxxxxxxxxxxx> έγραψε:
>>>>> >>>>
>>>>> >>>>> it seemed funny, so i tried it again.
>>>>> >>>>> it is being installed right now...
>>>>> >>>>> who knows what happened...
>>>>> >>>>> can i try this here or should i again go somewhere with a
>>>>> >>>>> "normal"
>>>>> >>>>> phone
>>>>> >>>>> line?
>>>>> >>>>> anyway i will soon post the results
>>>>> >>>>>
>>>>> >>>>> Στις 31 Ιανουαρίου 2010 11:09 μ.μ., ο χρήστης Βασίλης <
>>>>> >>>>> piperastaman@xxxxxxxxxxxxxx> έγραψε:
>>>>> >>>>>
>>>>> >>>>>> basilis@basilis-laptop:~$ sudo apt-get install grub
>>>>> >>>>>> [sudo] password for basilis:
>>>>> >>>>>> Reading package lists... Done
>>>>> >>>>>> Building dependency tree
>>>>> >>>>>> Reading state information... Done
>>>>> >>>>>> The following packages were automatically installed and are no
>>>>> >>>>>> longer
>>>>> >>>>>> required:
>>>>> >>>>>> unixodbc libopal3.6.4 odbcinst1debian1 libpt2.6.4-plugins
>>>>> >>>>>> libpt2.6.4
>>>>> >>>>>> Use 'apt-get autoremove' to remove them.
>>>>> >>>>>> Suggested packages:
>>>>> >>>>>> grub-doc mdadm
>>>>> >>>>>> The following packages will be REMOVED:
>>>>> >>>>>> grub-pc
>>>>> >>>>>> The following NEW packages will be installed:
>>>>> >>>>>> grub
>>>>> >>>>>> 0 upgraded, 1 newly installed, 1 to remove and 0 not upgraded.
>>>>> >>>>>> Need to get 407kB of archives.
>>>>> >>>>>> After this operation, 807kB disk space will be freed.
>>>>> >>>>>> Do you want to continue [Y/n]? Y
>>>>> >>>>>> Get:1 http://gr.archive.ubuntu.com karmic/main grub
>>>>> >>>>>> 0.97-29ubuntu59
>>>>> >>>>>> [407kB]
>>>>> >>>>>> Fetched 407kB in 0s (2,081kB/s)
>>>>> >>>>>> Preconfiguring packages ...
>>>>> >>>>>> (Reading database ... 162470 files and directories currently
>>>>> >>>>>> installed.)
>>>>> >>>>>> Removing grub-pc ...
>>>>> >>>>>> Processing triggers for man-db ...
>>>>> >>>>>> Selecting previously deselected package grub.
>>>>> >>>>>> (Reading database ... 162288 files and directories currently
>>>>> >>>>>> installed.)
>>>>> >>>>>> Unpacking grub (from .../grub_0.97-29ubuntu59_i386.deb) ...
>>>>> >>>>>> Processing triggers for man-db ...
>>>>> >>>>>> Setting up grub (0.97-29ubuntu59) ...
>>>>> >>>>>>
>>>>> >>>>>> basilis@basilis-laptop:~$
>>>>> >>>>>>
>>>>> >>>>>> ##browser:
>>>>> >>>>>> http://packages.ubuntu.com/jaunty/linux-image-2.6.28-16-generic
>>>>> >>>>>>
>>>>> >>>>>> ##downloaded it(foto)
>>>>> >>>>>> ##but(2nd foto)
>>>>> >>>>>>
>>>>> >>>>>> 2010/1/31, Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx>:
>>>>> >>>>>> > Please do
>>>>> >>>>>> > $ sudo apt-get install grub
>>>>> >>>>>> > which update has a needed fix for the grub delivered on the
>>>>> >>>>>> > karmic
>>>>> >>>>>> install
>>>>> >>>>>> > CD.
>>>>> >>>>>> >
>>>>> >>>>>> > Then through
>>>>> >>>>>> http://packages.ubuntu.com/jaunty/linux-image-2.6.28-16-generic
>>>>> >>>>>> > download & install. This earlier kernel+modules package is
>>>>> >>>>>> > Karmic
>>>>> >>>>>> > compatible.
>>>>> >>>>>> > Reboot with the -2.6.28-16-generic kernel and test the modem
>>>>> >>>>>> > again.
>>>>> >>>>>> >
>>>>> >>>>>> > MarvS
>>>>> >>>>>> >
>>>>> >>>>>> > 2010/1/31 Βασίλης <piperastaman@xxxxxxxxxxxxxx>:
>>>>> >>>>>> >> so, currently it is a no-can-do, right?...
>>>>> >>>>>> >> what a pity...
>>>>> >>>>>> >> i was so happy.
>>>>> >>>>>> >> what do you reckon, i wait for the fix or i try to connect
>>>>> >>>>>> >> through
>>>>> >>>>>> >> an
>>>>> >>>>>> >> external modem?
>>>>> >>>>>> >> i have a couple of them - i just need to find a cable for
>>>>> >>>>>> >> the
>>>>> >>>>>> electricity
>>>>> >>>>>> >> and then i just plug it in and hope scan modem will check
>>>>> >>>>>> >> it...
>>>>> >>>>>> >>
>>>>> >>>>>> >>
>>>>> >>>>>> >> Στις 31 Ιανουαρίου 2010 5:02 μ.μ., ο χρήστης Marvin Stodolsky
>>>>> >>>>>> >> <marvin.stodolsky@xxxxxxxxx> έγραψε:
>>>>> >>>>>> >>>
>>>>> >>>>>> >>> If you already added the line to /etc/wvdial.conf
>>>>> >>>>>> >>> Carrier Check = no
>>>>> >>>>>> >>> then you have encountered a known problem, for which we are
>>>>> >>>>>> >>> awainting
>>>>> >>>>>> a
>>>>> >>>>>> >>> fix.
>>>>> >>>>>> >>>
>>>>> >>>>>> >>> dkms was evidently installed by default. I had to the manual
>>>>> >>>>>> >>> install
>>>>> >>>>>> >>> before the upgrade to Karmic
>>>>> >>>>>> >>>
>>>>> >>>>>> >>> Marv
>>>>> >>>>>> >>>
>>>>> >>>>>> >>> 2010/1/31 Βασίλης <piperastaman@xxxxxxxxxxxxxx>:
>>>>> >>>>>> >>> > ##procedure in the other place, where a telephone is
>>>>> >>>>>> >>> > available;
>>>>> >>>>>> >>> > and
>>>>> >>>>>> >>> > this
>>>>> >>>>>> >>> > ##telephone connects to a spliter (phone/modem) with a
>>>>> >>>>>> >>> > cable(phone)
>>>>> >>>>>> and
>>>>> >>>>>> >>> > from
>>>>> >>>>>> >>> > there there also comes
>>>>> >>>>>> >>> > ##another cable out(modem), that connects to the external
>>>>> >>>>>> >>> > dsl
>>>>> >>>>>> >>> > modem.
>>>>> >>>>>> i
>>>>> >>>>>> >>> > take
>>>>> >>>>>> >>> > that second one, plug it in at the place of the phone and
>>>>> >>>>>> >>> > ##plug it to the computer
>>>>> >>>>>> >>> >
>>>>> >>>>>> >>> > basilis@basilis-laptop:~$ sudo modprobe -r snd-intel8x0m
>>>>> >>>>>> >>> > [sudo] password for basilis:
>>>>> >>>>>> >>> > basilis@basilis-laptop:~$ sudo modprobe snd-intel8x0m
>>>>> >>>>>> >>> > basilis@basilis-laptop:~$ sudo slmodemd -c GREECE --alsa
>>>>> >>>>>> >>> > modem:1
>>>>> >>>>>> >>> > SmartLink Soft Modem: version 2.9.11 Dec 3 2009 16:59:30
>>>>> >>>>>> >>> > symbolic link `/dev/ttySL0' -> `/dev/pts/1' created.
>>>>> >>>>>> >>> > modem `modem:1' created. TTY is `/dev/pts/1'
>>>>> >>>>>> >>> > Use `/dev/ttySL0' as modem device, Ctrl+C for termination.
>>>>> >>>>>> >>> >
>>>>> >>>>>> >>> > ##and in a new terminal:
>>>>> >>>>>> >>> >
>>>>> >>>>>> >>> > basilis@basilis-laptop:~$ sudo dhclient eth0
>>>>> >>>>>> >>> > There is already a pid file /var/run/dhclient.pid with pid
>>>>> >>>>>> >>> > 1739
>>>>> >>>>>> >>> > killed old client process, removed PID file
>>>>> >>>>>> >>> > Internet Systems Consortium DHCP Client V3.1.2
>>>>> >>>>>> >>> > Copyright 2004-2008 Internet Systems Consortium.
>>>>> >>>>>> >>> > All rights reserved.
>>>>> >>>>>> >>> > For info, please visit http://www.isc.org/sw/dhcp/
>>>>> >>>>>> >>> >
>>>>> >>>>>> >>> > Listening on LPF/eth0/00:a0:cc:d7:df:86
>>>>> >>>>>> >>> > Sending on LPF/eth0/00:a0:cc:d7:df:86
>>>>> >>>>>> >>> > Sending on Socket/fallback
>>>>> >>>>>> >>> > DHCPREQUEST of 195.251.129.44 on eth0 to 255.255.255.255
>>>>> >>>>>> >>> > port
>>>>> >>>>>> >>> > 67
>>>>> >>>>>> >>> > DHCPREQUEST of 195.251.129.44 on eth0 to 255.255.255.255
>>>>> >>>>>> >>> > port
>>>>> >>>>>> >>> > 67
>>>>> >>>>>> >>> > DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 3
>>>>> >>>>>> >>> > DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7
>>>>> >>>>>> >>> > DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8
>>>>> >>>>>> >>> > DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9
>>>>> >>>>>> >>> > DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval
>>>>> >>>>>> >>> > 11
>>>>> >>>>>> >>> > DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval
>>>>> >>>>>> >>> > 15
>>>>> >>>>>> >>> > DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8
>>>>> >>>>>> >>> > No DHCPOFFERS received.
>>>>> >>>>>> >>> > Trying recorded lease 195.251.129.44
>>>>> >>>>>> >>> > PING 195.251.129.126 (195.251.129.126) 56(84) bytes of
>>>>> >>>>>> >>> > data.
>>>>> >>>>>> >>> >
>>>>> >>>>>> >>> > --- 195.251.129.126 ping statistics ---
>>>>> >>>>>> >>> > 1 packets transmitted, 0 received, +1 errors, 100% packet
>>>>> >>>>>> >>> > loss,
>>>>> >>>>>> >>> > time
>>>>> >>>>>> >>> > 0ms
>>>>> >>>>>> >>> >
>>>>> >>>>>> >>> > No working leases in persistent database - sleeping.
>>>>> >>>>>> >>> >
>>>>> >>>>>> >>> > basilis@basilis-laptop:~$ sudo wvdial
>>>>> >>>>>> >>> > --> WvDial: Internet dialer version 1.60
>>>>> >>>>>> >>> > --> Cannot get information for serial port.
>>>>> >>>>>> >>> > --> Initializing modem.
>>>>> >>>>>> >>> > --> Sending: ATZ
>>>>> >>>>>> >>> > ATZ
>>>>> >>>>>> >>> > OK
>>>>> >>>>>> >>> > --> Sending: ATQ0 V1 E1 S0=0 X3 &C1 &D2 +FCLASS=0
>>>>> >>>>>> >>> > ATQ0 V1 E1 S0=0 X3 &C1 &D2 +FCLASS=0
>>>>> >>>>>> >>> > OK
>>>>> >>>>>> >>> > --> Modem initialized.
>>>>> >>>>>> >>> > --> Sending: ATDT8962514140
>>>>> >>>>>> >>> > --> Waiting for carrier.
>>>>> >>>>>> >>> > ATDT8962514140
>>>>> >>>>>> >>> > --> Timed out while dialing. Trying again.
>>>>> >>>>>> >>> > --> Sending: ATDT8962514140
>>>>> >>>>>> >>> > --> Waiting for carrier.
>>>>> >>>>>> >>> > NO CARRIER
>>>>> >>>>>> >>> > ATDT8962514140
>>>>> >>>>>> >>> > --> No Carrier! Trying again.
>>>>> >>>>>> >>> > --> Sending: ATDT8962514140
>>>>> >>>>>> >>> > --> Waiting for carrier.
>>>>> >>>>>> >>> > NO CARRIER
>>>>> >>>>>> >>> > .
>>>>> >>>>>> >>> > .
>>>>> >>>>>> >>> > .
>>>>> >>>>>> >>> >
>>>>> >>>>>> >>> >
>>>>> >>>>>> >>> > very not nice...
>>>>> >>>>>> >>> >
>>>>> >>>>>> >>> > suggestions?...
>>>>> >>>>>> >>> >
>>>>> >>>>>> >>> > Στις 31 Ιανουαρίου 2010 6:19 π.μ., ο χρήστης Βασίλης
>>>>> >>>>>> >>> > <piperastaman@xxxxxxxxxxxxxx> έγραψε:
>>>>> >>>>>> >>> >>
>>>>> >>>>>> >>> >> basilis@basilis-laptop:~$ sudo apt-get install -s dkms
>>>>> >>>>>> >>> >> [sudo] password for basilis:
>>>>> >>>>>> >>> >> Reading package lists... Done
>>>>> >>>>>> >>> >> Building dependency tree
>>>>> >>>>>> >>> >> Reading state information... Done
>>>>> >>>>>> >>> >> dkms is already the newest version.
>>>>> >>>>>> >>> >> dkms set to manually installed.
>>>>> >>>>>> >>> >> 0 upgraded, 0 newly installed, 0 to remove and 0 not
>>>>> >>>>>> >>> >> upgraded.
>>>>> >>>>>> >>> >> basilis@basilis-laptop:~$ sudo apt-get install dkms
>>>>> >>>>>> >>> >> Reading package lists... Done
>>>>> >>>>>> >>> >> Building dependency tree
>>>>> >>>>>> >>> >> Reading state information... Done
>>>>> >>>>>> >>> >> dkms is already the newest version.
>>>>> >>>>>> >>> >> dkms set to manually installed.
>>>>> >>>>>> >>> >> 0 upgraded, 0 newly installed, 0 to remove and 0 not
>>>>> >>>>>> >>> >> upgraded.
>>>>> >>>>>> >>> >> basilis@basilis-laptop:~$
>>>>> >>>>>> >>> >>
>>>>> >>>>>> >>> >> how was it already there???
>>>>> >>>>>> >>> >>
>>>>> >>>>>> >>> >> 2010/1/31, Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx>:
>>>>> >>>>>> >>> >> > http://linux.dell.com/dkms/ is just general info.
>>>>> >>>>>> >>> >> >
>>>>> >>>>>> >>> >> > While you are unline under Linux, do from the top bar:
>>>>> >>>>>> >>> >> > System > Adm > Update Manager
>>>>> >>>>>> >>> >> > to refresh your package lists. Manually, this is:
>>>>> >>>>>> >>> >> > $ sudo apt-get update
>>>>> >>>>>> >>> >> >
>>>>> >>>>>> >>> >> > Then either use Aptitude to install dkms or manually:
>>>>> >>>>>> >>> >> > $ sudo apt-get install -s dkms
>>>>> >>>>>> >>> >> > the "-s" means simulate, to forsee any problems. If
>>>>> >>>>>> >>> >> > none
>>>>> >>>>>> >>> >> > related.
>>>>> >>>>>> >>> >> > $ sudo apt-get install dkms
>>>>> >>>>>> >>> >> >
>>>>> >>>>>> >>> >> > DKMS services are not so far as I can see necessary for
>>>>> >>>>>> >>> >> > your
>>>>> >>>>>> System
>>>>> >>>>>> >>> >> > now.
>>>>> >>>>>> >>> >> > But if you ever have to use Custom drivers, DKMS
>>>>> >>>>>> >>> >> > automatically
>>>>> >>>>>> >>> >> > manages
>>>>> >>>>>> >>> >> > their update wheneven you install a new kernel.
>>>>> >>>>>> >>> >> >
>>>>> >>>>>> >>> >> > MarvS
>>>>> >>>>>> >>> >> >
>>>>> >>>>>> >>> >> > 2010/1/30 Βασίλης <piperastaman@xxxxxxxxxxxxxx>:
>>>>> >>>>>> >>> >> >> basilis@basilis-laptop:~$ cat /etc/resolv.conf
>>>>> >>>>>> >>> >> >> # Generated by NetworkManager
>>>>> >>>>>> >>> >> >> domain lesvos.aegean.gr
>>>>> >>>>>> >>> >> >> search lesvos.aegean.gr
>>>>> >>>>>> >>> >> >> nameserver 195.251.128.5
>>>>> >>>>>> >>> >> >> nameserver 195.251.130.8
>>>>> >>>>>> >>> >> >> basilis@basilis-laptop:~$
>>>>> >>>>>> >>> >> >>
>>>>> >>>>>> >>> >> >> when i get to another place i shall try this
>>>>> >>>>>> >>> >> >>
>>>>> >>>>>> >>> >> >> the dkms file i downloaded
>>>>> >>>>>> >>> >> >> (http://linux.dell.com/dkms/
>>>>> >>>>>> >>> >> >> )
>>>>> >>>>>> >>> >> >> was
>>>>> >>>>>> not a
>>>>> >>>>>> >>> >> >> .deb
>>>>> >>>>>> >>> >> >> because it was not there: "Object not found!" 404
>>>>> >>>>>> >>> >> >> so i downloaded the dkms-2.1.1.1.tar.gz , which i
>>>>> >>>>>> >>> >> >> extracted,
>>>>> >>>>>> but
>>>>> >>>>>> >>> >> >> then
>>>>> >>>>>> >>> >> >> ? .
>>>>> >>>>>> >>> >> >> . .
>>>>> >>>>>> >>> >> >>
>>>>> >>>>>> >>> >> >> 2010/1/31, Marvin Stodolsky
>>>>> >>>>>> >>> >> >> <marvin.stodolsky@xxxxxxxxx>:
>>>>> >>>>>> >>> >> >>> RE: DHCPREQUEST of 195.251.129.44 on eth0 to
>>>>> >>>>>> >>> >> >>> 255.255.255.255
>>>>> >>>>>> port
>>>>> >>>>>> >>> >> >>> 67
>>>>> >>>>>> >>> >> >>> DHCPACK of 195.251.129.44 from 195.251.129.126
>>>>> >>>>>> >>> >> >>> bound to 195.251.129.44 -- renewal in 416660 seconds.
>>>>> >>>>>> >>> >> >>> -------
>>>>> >>>>>> >>> >> >>> This is a Success.
>>>>> >>>>>> >>> >> >>> ppp0 modem dial up will Not work and is not
>>>>> >>>>>> >>> >> >>> necessary.
>>>>> >>>>>> >>> >> >>> You should be able to browse at this point. Do:
>>>>> >>>>>> >>> >> >>> $ cat /etc/resolv.conf
>>>>> >>>>>> >>> >> >>> should show the DNS being used.
>>>>> >>>>>> >>> >> >>>
>>>>> >>>>>> >>> >> >>> If trying to use the modem by dialout some other
>>>>> >>>>>> >>> >> >>> place,
>>>>> >>>>>> >>> >> >>> you
>>>>> >>>>>> could
>>>>> >>>>>> >>> >> >>> first:
>>>>> >>>>>> >>> >> >>> $ sudo ifconfig eth0 down
>>>>> >>>>>> >>> >> >>> or DNS services for later ppp0 would fail
>>>>> >>>>>> >>> >> >>>
>>>>> >>>>>> >>> >> >>> Sending: ATQ0 V1 E1 S0=0 X3 &C1 &D2 +FCLASS=0
>>>>> >>>>>> >>> >> >>> is correct. You could also try:
>>>>> >>>>>> >>> >> >>> Sending: ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=34
>>>>> >>>>>> >>> >> >>> with the +MS=34 compensating for noisy lines. Read
>>>>> >>>>>> >>> >> >>> the
>>>>> >>>>>> wvdial.txt
>>>>> >>>>>> >>> >> >>>
>>>>> >>>>>> >>> >> >>>
>>>>> >>>>>> >>> >> >>> MarvS
>>>>> >>>>>> >>> >> >>>
>>>>> >>>>>> >>> >> >>>
>>>>> >>>>>> >>> >> >>> 2010/1/30 Βασίλης <piperastaman@xxxxxxxxxxxxxx>:
>>>>> >>>>>> >>> >> >>>>
>>>>> >>>>>> >>> >> >>>> basilis@basilis-laptop:~$ sudo gedit
>>>>> >>>>>> >>> >> >>>> /etc/wvdial.conf
>>>>> >>>>>> >>> >> >>>> [sudo] password for basilis:
>>>>> >>>>>> >>> >> >>>>
>>>>> >>>>>> >>> >> >>>> ##removed the line #Init2 = X3
>>>>> >>>>>> >>> >> >>>> ##put a # in front of the stupid mode
>>>>> >>>>>> >>> >> >>>> ##added a X3 at the end of the Init2 line so it
>>>>> >>>>>> >>> >> >>>> became:Init2
>>>>> >>>>>> >>> >> >>>> =
>>>>> >>>>>> >>> >> >>>> ATQ0
>>>>> >>>>>> >>> >> >>>> V1
>>>>> >>>>>> >>> >> >>>> E1
>>>>> >>>>>> >>> >> >>>> S0=0 &C1 &D2 +FCLASS=0 X3
>>>>> >>>>>> >>> >> >>>>
>>>>> >>>>>> >>> >> >>>> basilis@basilis-laptop:~$ modprobe -r snd-intel8x0m
>>>>> >>>>>> >>> >> >>>> basilis@basilis-laptop:~$ sudo modprobe
>>>>> >>>>>> >>> >> >>>> snd-intel8x0m
>>>>> >>>>>> >>> >> >>>> ba924216211silis@basilis-laptop:~$ sudo slmodemd -c
>>>>> >>>>>> >>> >> >>>> GREECE
>>>>> >>>>>> --alsa
>>>>> >>>>>> >>> >> >>>> modem:1
>>>>> >>>>>> >>> >> >>>> SmartLink Soft Modem: version 2.9.11 Dec 3 2009
>>>>> >>>>>> >>> >> >>>> 16:59:30
>>>>> >>>>>> >>> >> >>>> symbolic link `/dev/ttySL0' -> `/dev/pts/1' created.
>>>>> >>>>>> >>> >> >>>> modem `modem:1' created. TTY is `/dev/pts/1'
>>>>> >>>>>> >>> >> >>>> Use `/dev/ttySL0' as modem device, Ctrl+C for
>>>>> >>>>>> >>> >> >>>> termination.
>>>>> >>>>>> >>> >> >>>>
>>>>> >>>>>> >>> >> >>>> ##then in a new terminal:
>>>>> >>>>>> >>> >> >>>>
>>>>> >>>>>> >>> >> >>>> basilis@basilis-laptop:~$ sudo wvdial
>>>>> >>>>>> >>> >> >>>> [sudo] password for basilis:
>>>>> >>>>>> >>> >> >>>> --> WvDial: Internet dialer version 1.60
>>>>> >>>>>> >>> >> >>>> --> Cannot get information for serial port.
>>>>> >>>>>> >>> >> >>>> --> Initializing modem.
>>>>> >>>>>> >>> >> >>>> --> Sending: ATZ
>>>>> >>>>>> >>> >> >>>> ATZ
>>>>> >>>>>> >>> >> >>>> OK
>>>>> >>>>>> >>> >> >>>> --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 X3
>>>>> >>>>>> >>> >> >>>> ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 X3
>>>>> >>>>>> >>> >> >>>> OK
>>>>> >>>>>> >>> >> >>>> --> Modem initialized.
>>>>> >>>>>> >>> >> >>>> --> Sending: ATDT8962514140
>>>>> >>>>>> >>> >> >>>> --> Waiting for carrier.
>>>>> >>>>>> >>> >> >>>> ATDT8962514140
>>>>> >>>>>> >>> >> >>>> --> Timed out while dialing. Trying again.
>>>>> >>>>>> >>> >> >>>> --> Sending: ATDT8962514140
>>>>> >>>>>> >>> >> >>>> --> Waiting for carrier.
>>>>> >>>>>> >>> >> >>>> NO CARRIER
>>>>> >>>>>> >>> >> >>>> ATDT8962514140
>>>>> >>>>>> >>> >> >>>> --> No Carrier! Trying again.
>>>>> >>>>>> >>> >> >>>> --> Sending: ATDT8962514140
>>>>> >>>>>> >>> >> >>>> --> Waiting for carrier.
>>>>> >>>>>> >>> >> >>>> NO CARRIER
>>>>> >>>>>> >>> >> >>>> ATDT8962514140
>>>>> >>>>>> >>> >> >>>> --> No Carrier! Trying again.
>>>>> >>>>>> >>> >> >>>> --> Sending: ATDT8962514140
>>>>> >>>>>> >>> >> >>>> --> Waiting for carrier.
>>>>> >>>>>> >>> >> >>>> NO CARRIER
>>>>> >>>>>> >>> >> >>>>
>>>>> >>>>>> >>> >> >>>> ##i stopped with Ctrl-C
>>>>> >>>>>> >>> >> >>>> ##then i thought that you might want me to put the
>>>>> >>>>>> >>> >> >>>> X3
>>>>> >>>>>> >>> >> >>>> between
>>>>> >>>>>> the
>>>>> >>>>>> >>> >> >>>> S0=0
>>>>> >>>>>> >>> >> >>>> and
>>>>> >>>>>> >>> >> >>>> the &C1
>>>>> >>>>>> >>> >> >>>> ##so i did; and:
>>>>> >>>>>> >>> >> >>>>
>>>>> >>>>>> >>> >> >>>> basilis@basilis-laptop:~$ sudo modprobe -r
>>>>> >>>>>> >>> >> >>>> snd-intel8x0m
>>>>> >>>>>> >>> >> >>>> basilis@basilis-laptop:~$ sudo modprobe
>>>>> >>>>>> >>> >> >>>> snd-intel8x0m
>>>>> >>>>>> >>> >> >>>> basilis@basilis-laptop:~$ sudo slmodemd -c GREECE
>>>>> >>>>>> >>> >> >>>> --alsa
>>>>> >>>>>> modem:1
>>>>> >>>>>> >>> >> >>>> SmartLink Soft Modem: version 2.9.11 Dec 3 2009
>>>>> >>>>>> >>> >> >>>> 16:59:30
>>>>> >>>>>> >>> >> >>>> symbolic link `/dev/ttySL0' -> `/dev/pts/1' created.
>>>>> >>>>>> >>> >> >>>> modem `modem:1' created. TTY is `/dev/pts/1'
>>>>> >>>>>> >>> >> >>>> Use `/dev/ttySL0' as modem device, Ctrl+C for
>>>>> >>>>>> >>> >> >>>> termination.
>>>>> >>>>>> >>> >> >>>>
>>>>> >>>>>> >>> >> >>>> ##then, in a new terminal:
>>>>> >>>>>> >>> >> >>>>
>>>>> >>>>>> >>> >> >>>> basilis@basilis-laptop:~$ sudo wvdial
>>>>> >>>>>> >>> >> >>>> --> WvDial: Internet dialer version 1.60
>>>>> >>>>>> >>> >> >>>> --> Cannot get information for serial port.
>>>>> >>>>>> >>> >> >>>> --> Initializing modem.
>>>>> >>>>>> >>> >> >>>> --> Sending: ATZ
>>>>> >>>>>> >>> >> >>>> ATZ
>>>>> >>>>>> >>> >> >>>> OK
>>>>> >>>>>> >>> >> >>>> --> Sending: ATQ0 V1 E1 S0=0 X3 &C1 &D2 +FCLASS=0
>>>>> >>>>>> >>> >> >>>> ATQ0 V1 E1 S0=0 X3 &C1 &D2 +FCLASS=0
>>>>> >>>>>> >>> >> >>>> OK
>>>>> >>>>>> >>> >> >>>> --> Modem initialized.
>>>>> >>>>>> >>> >> >>>> --> Sending: ATDT8962514140
>>>>> >>>>>> >>> >> >>>> --> Waiting for carrier.
>>>>> >>>>>> >>> >> >>>> ATDT8962514140
>>>>> >>>>>> >>> >> >>>> NO DIALTONE
>>>>> >>>>>> >>> >> >>>> --> No dial tone.
>>>>> >>>>>> >>> >> >>>> --> Disconnecting at Sun Jan 31 01:06:12 2010
>>>>> >>>>>> >>> >> >>>> basilis@basilis-laptop:~$
>>>>> >>>>>> >>> >> >>>>
>>>>> >>>>>> >>> >> >>>>
>>>>> >>>>>> >>> >> >>>> ##then, i decided to remove the # from the stupid
>>>>> >>>>>> >>> >> >>>> mode
>>>>> >>>>>> >>> >> >>>> line
>>>>> >>>>>> >>> >> >>>> at
>>>>> >>>>>> >>> >> >>>> the
>>>>> >>>>>> >>> >> >>>> end,
>>>>> >>>>>> >>> >> >>>> so
>>>>> >>>>>> >>> >> >>>> i
>>>>> >>>>>> >>> >> >>>> did:
>>>>> >>>>>> >>> >> >>>>
>>>>> >>>>>> >>> >> >>>> basilis@basilis-laptop:~$ sudo modprobe -r
>>>>> >>>>>> >>> >> >>>> snd-intel8x0m
>>>>> >>>>>> >>> >> >>>> basilis@basilis-laptop:~$ sudo modprobe
>>>>> >>>>>> >>> >> >>>> snd-intel8x0m
>>>>> >>>>>> >>> >> >>>> basilis@basilis-laptop:~$ sudo slmodemd -c GREECE
>>>>> >>>>>> >>> >> >>>> --alsa
>>>>> >>>>>> modem:1
>>>>> >>>>>> >>> >> >>>> SmartLink Soft Modem: version 2.9.11 Dec 3 2009
>>>>> >>>>>> >>> >> >>>> 16:59:30
>>>>> >>>>>> >>> >> >>>> symbolic link `/dev/ttySL0' -> `/dev/pts/1' created.
>>>>> >>>>>> >>> >> >>>> modem `modem:1' created. TTY is `/dev/pts/1'
>>>>> >>>>>> >>> >> >>>> Use `/dev/ttySL0' as modem device, Ctrl+C for
>>>>> >>>>>> >>> >> >>>> termination.
>>>>> >>>>>> >>> >> >>>>
>>>>> >>>>>> >>> >> >>>> ##and:
>>>>> >>>>>> >>> >> >>>>
>>>>> >>>>>> >>> >> >>>> basilis@basilis-laptop:~$ sudo wvdial
>>>>> >>>>>> >>> >> >>>> --> WvDial: Internet dialer version 1.60
>>>>> >>>>>> >>> >> >>>> --> Cannot get information for serial port.
>>>>> >>>>>> >>> >> >>>> --> Initializing modem.
>>>>> >>>>>> >>> >> >>>> --> Sending: ATZ
>>>>> >>>>>> >>> >> >>>> ATZ
>>>>> >>>>>> >>> >> >>>> OK
>>>>> >>>>>> >>> >> >>>> --> Sending: ATQ0 V1 E1 S0=0 X3 &C1 &D2 +FCLASS=0
>>>>> >>>>>> >>> >> >>>> ATQ0 V1 E1 S0=0 X3 &C1 &D2 +FCLASS=0
>>>>> >>>>>> >>> >> >>>> OK
>>>>> >>>>>> >>> >> >>>> --> Modem initialized.
>>>>> >>>>>> >>> >> >>>> --> Sending: ATDT8962514140
>>>>> >>>>>> >>> >> >>>> --> Waiting for carrier.
>>>>> >>>>>> >>> >> >>>> ATDT8962514140
>>>>> >>>>>> >>> >> >>>> NO DIALTONE
>>>>> >>>>>> >>> >> >>>> --> No dial tone.
>>>>> >>>>>> >>> >> >>>> --> Disconnecting at Sun Jan 31 01:09:39 2010
>>>>> >>>>>> >>> >> >>>> basilis@basilis-laptop:~$
>>>>> >>>>>> >>> >> >>>>
>>>>> >>>>>> >>> >> >>>>
>>>>> >>>>>> >>> >> >>>>
>>>>> >>>>>> >>> >> >>>> ##so, i moved on to the next advice:
>>>>> >>>>>> >>> >> >>>>
>>>>> >>>>>> >>> >> >>>> basilis@basilis-laptop:~$ ifconfig
>>>>> >>>>>> >>> >> >>>> eth0 Link encap:Ethernet HWaddr
>>>>> >>>>>> >>> >> >>>> 00:a0:cc:d7:df:86
>>>>> >>>>>> >>> >> >>>> inet addr:195.251.129.44
>>>>> >>>>>> >>> >> >>>> Bcast:195.251.129.127
>>>>> >>>>>> >>> >> >>>> Mask:255.255.255.128
>>>>> >>>>>> >>> >> >>>> inet6 addr: fe80::2a0:ccff:fed7:df86/64
>>>>> >>>>>> >>> >> >>>> Scope:Link
>>>>> >>>>>> >>> >> >>>> UP BROADCAST RUNNING MULTICAST MTU:1500
>>>>> >>>>>> >>> >> >>>> Metric:1
>>>>> >>>>>> >>> >> >>>> RX packets:1135964 errors:0 dropped:0
>>>>> >>>>>> >>> >> >>>> overruns:0
>>>>> >>>>>> >>> >> >>>> frame:0
>>>>> >>>>>> >>> >> >>>> TX packets:665739 errors:0 dropped:0
>>>>> >>>>>> >>> >> >>>> overruns:0
>>>>> >>>>>> >>> >> >>>> carrier:0
>>>>> >>>>>> >>> >> >>>> collisions:0 txqueuelen:1000
>>>>> >>>>>> >>> >> >>>> RX bytes:1609967888 (1.6 GB) TX
>>>>> >>>>>> >>> >> >>>> bytes:46322503
>>>>> >>>>>> (46.3
>>>>> >>>>>> >>> >> >>>> MB)
>>>>> >>>>>> >>> >> >>>> Interrupt:17 Base address:0x2000
>>>>> >>>>>> >>> >> >>>>
>>>>> >>>>>> >>> >> >>>> lo Link encap:Local Loopback
>>>>> >>>>>> >>> >> >>>> inet addr:127.0.0.1 Mask:255.0.0.0
>>>>> >>>>>> >>> >> >>>> inet6 addr: ::1/128 Scope:Host
>>>>> >>>>>> >>> >> >>>> UP LOOPBACK RUNNING MTU:16436 Metric:1
>>>>> >>>>>> >>> >> >>>> RX packets:0 errors:0 dropped:0 overruns:0
>>>>> >>>>>> >>> >> >>>> frame:0
>>>>> >>>>>> >>> >> >>>> TX packets:0 errors:0 dropped:0 overruns:0
>>>>> >>>>>> >>> >> >>>> carrier:0
>>>>> >>>>>> >>> >> >>>> collisions:0 txqueuelen:0
>>>>> >>>>>> >>> >> >>>> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
>>>>> >>>>>> >>> >> >>>>
>>>>> >>>>>> >>> >> >>>> ##i cannot recognize if there is a block
>>>>> >>>>>> >>> >> >>>> whatsoever...
>>>>> >>>>>> >>> >> >>>> ##anyway i proceed: [hopefully i am not messing up
>>>>> >>>>>> >>> >> >>>> my
>>>>> >>>>>> >>> >> >>>> connection...]
>>>>> >>>>>> >>> >> >>>>
>>>>> >>>>>> >>> >> >>>> basilis@basilis-laptop:~$ sudo dhclient eth0
>>>>> >>>>>> >>> >> >>>> Internet Systems Consortium DHCP Client V3.1.2
>>>>> >>>>>> >>> >> >>>> Copyright 2004-2008 Internet Systems Consortium.
>>>>> >>>>>> >>> >> >>>> All rights reserved.
>>>>> >>>>>> >>> >> >>>> For info, please visit http://www.isc.org/sw/dhcp/
>>>>> >>>>>> >>> >> >>>>
>>>>> >>>>>> >>> >> >>>> Listening on LPF/eth0/00:a0:cc:d7:df:86
>>>>> >>>>>> >>> >> >>>> Sending on LPF/eth0/00:a0:cc:d7:df:86
>>>>> >>>>>> >>> >> >>>> Sending on Socket/fallback
>>>>> >>>>>> >>> >> >>>> DHCPDISCOVER on eth0 to 255.255.255.255 port 67
>>>>> >>>>>> >>> >> >>>> interval 7
>>>>> >>>>>> >>> >> >>>> DHCPOFFER of 195.251.129.44 from 195.251.129.126
>>>>> >>>>>> >>> >> >>>> DHCPREQUEST of 195.251.129.44 on eth0 to
>>>>> >>>>>> >>> >> >>>> 255.255.255.255
>>>>> >>>>>> >>> >> >>>> port
>>>>> >>>>>> 67
>>>>> >>>>>> >>> >> >>>> DHCPACK of 195.251.129.44 from 195.251.129.126
>>>>> >>>>>> >>> >> >>>> bound to 195.251.129.44 -- renewal in 416660
>>>>> >>>>>> >>> >> >>>> seconds.
>>>>> >>>>>> >>> >> >>>> basilis@basilis-laptop:~$
>>>>> >>>>>> >>> >> >>>>
>>>>> >>>>>> >>> >> >>>> ##and i try again:
>>>>> >>>>>> >>> >> >>>>
>>>>> >>>>>> >>> >> >>>> basilis@basilis-laptop:~$ sudo modprobe -r
>>>>> >>>>>> >>> >> >>>> snd-intel8x0m
>>>>> >>>>>> >>> >> >>>> basilis@basilis-laptop:~$ sudo modprobe
>>>>> >>>>>> >>> >> >>>> snd-intel8x0m
>>>>> >>>>>> >>> >> >>>> basilis@basilis-laptop:~$ sudo slmodemd -c GREECE
>>>>> >>>>>> >>> >> >>>> --alsa
>>>>> >>>>>> modem:1
>>>>> >>>>>> >>> >> >>>> SmartLink Soft Modem: version 2.9.11 Dec 3 2009
>>>>> >>>>>> >>> >> >>>> 16:59:30
>>>>> >>>>>> >>> >> >>>> symbolic link `/dev/ttySL0' -> `/dev/pts/1' created.
>>>>> >>>>>> >>> >> >>>> modem `modem:1' created. TTY is `/dev/pts/1'
>>>>> >>>>>> >>> >> >>>> Use `/dev/ttySL0' as modem device, Ctrl+C for
>>>>> >>>>>> >>> >> >>>> termination.
>>>>> >>>>>> >>> >> >>>>
>>>>> >>>>>> >>> >> >>>> ##and in a new terminal:
>>>>> >>>>>> >>> >> >>>>
>>>>> >>>>>> >>> >> >>>> basilis@basilis-laptop:~$ sudo wvdial
>>>>> >>>>>> >>> >> >>>> --> WvDial: Internet dialer version 1.60
>>>>> >>>>>> >>> >> >>>> --> Cannot get information for serial port.
>>>>> >>>>>> >>> >> >>>> --> Initializing modem.
>>>>> >>>>>> >>> >> >>>> --> Sending: ATZ
>>>>> >>>>>> >>> >> >>>> ATZ
>>>>> >>>>>> >>> >> >>>> OK
>>>>> >>>>>> >>> >> >>>> --> Sending: ATQ0 V1 E1 S0=0 X3 &C1 &D2 +FCLASS=0
>>>>> >>>>>> >>> >> >>>> ATQ0 V1 E1 S0=0 X3 &C1 &D2 +FCLASS=0
>>>>> >>>>>> >>> >> >>>> OK
>>>>> >>>>>> >>> >> >>>> --> Modem initialized.
>>>>> >>>>>> >>> >> >>>> --> Sending: ATDT8962514140
>>>>> >>>>>> >>> >> >>>> --> Waiting for carrier.
>>>>> >>>>>> >>> >> >>>> ATDT8962514140
>>>>> >>>>>> >>> >> >>>> NO DIALTONE
>>>>> >>>>>> >>> >> >>>> --> No dial tone.
>>>>> >>>>>> >>> >> >>>> --> Disconnecting at Sun Jan 31 01:14:27 2010
>>>>> >>>>>> >>> >> >>>> basilis@basilis-laptop:~$
>>>>> >>>>>> >>> >> >>>>
>>>>> >>>>>> >>> >> >>>> :-(
>>>>> >>>>>> >>> >> >>>> the link you sent me... it 's impossible for me.. i
>>>>> >>>>>> >>> >> >>>> am
>>>>> >>>>>> >>> >> >>>> just
>>>>> >>>>>> not
>>>>> >>>>>> >>> >> >>>> capable
>>>>> >>>>>> >>> >> >>>> enough of diving so deep
>>>>> >>>>>> >>> >> >>>>
>>>>> >>>>>> >>> >> >>>> Βασίλης
>>>>> >>>>>> >>> >> >>>>
>>>>> >>>>>> >>> >> >>>> Στις 30 Ιανουαρίου 2010 9:13 μ.μ., ο χρήστης Marvin
>>>>> >>>>>> >>> >> >>>> Stodolsky
>>>>> >>>>>> >>> >> >>>> <marvin.stodolsky@xxxxxxxxx> έγραψε:
>>>>> >>>>>> >>> >> >>>>>
>>>>> >>>>>> >>> >> >>>>> For dialout,
>>>>> >>>>>> >>> >> >>>>>
>>>>> >>>>>> >>> >> >>>>> Add X3 into the existing Init2 = line (not
>>>>> >>>>>> >>> >> >>>>> replacing
>>>>> >>>>>> >>> >> >>>>> the
>>>>> >>>>>> >>> >> >>>>> original)
>>>>> >>>>>> >>> >> >>>>> those that the new response is:
>>>>> >>>>>> >>> >> >>>>> --> Sending: ATQ0 V1 E1 S0=0 X3 &C1 &D2 +FCLASS=0
>>>>> >>>>>> >>> >> >>>>>
>>>>> >>>>>> >>> >> >>>>> But not sure you need modem with a DSL, which I
>>>>> >>>>>> >>> >> >>>>> also
>>>>> >>>>>> >>> >> >>>>> have.
>>>>> >>>>>> >>> >> >>>>> Read http://tldp.org/HOWTO/DSL-HOWTO/
>>>>> >>>>>> >>> >> >>>>> I connect to the DSL router with an ethernet cable,
>>>>> >>>>>> >>> >> >>>>> using
>>>>> >>>>>> >>> >> >>>>> channel
>>>>> >>>>>> >>> >> >>>>> eth0, not the dialout ppp0
>>>>> >>>>>> >>> >> >>>>>
>>>>> >>>>>> >>> >> >>>>> Check with:
>>>>> >>>>>> >>> >> >>>>> $ ifconfig
>>>>> >>>>>> >>> >> >>>>> is there a eth0 block?
>>>>> >>>>>> >>> >> >>>>> If so, then with an ethernet cable connection:
>>>>> >>>>>> >>> >> >>>>> $ sudo dhclient eth0
>>>>> >>>>>> >>> >> >>>>> which is automatically attempted on bootup
>>>>> >>>>>> >>> >> >>>>> regardless.
>>>>> >>>>>> >>> >> >>>>>
>>>>> >>>>>> >>> >> >>>>> MarvS
>>>>> >>>>>> >>> >> >>>>>
>>>>> >>>>>> >>> >> >>>>> 2010/1/30 Βασίλης <piperastaman@xxxxxxxxxxxxxx>:
>>>>> >>>>>> >>> >> >>>>> > basilis@basilis-laptop:~$ sudo wvdialconf wvtest
>>>>> >>>>>> >>> >> >>>>> > [sudo] password for basilis:
>>>>> >>>>>> >>> >> >>>>> > Editing `wvtest'.
>>>>> >>>>>> >>> >> >>>>> > Scanning your serial ports for a modem.
>>>>> >>>>>> >>> >> >>>>> > Modem Port Scan<*1>: S0 S1 S2 S3
>>>>> >>>>>> >>> >> >>>>> >
>>>>> >>>>>> >>> >> >>>>> > Sorry, no modem was detected! Is it in use by
>>>>> >>>>>> >>> >> >>>>> > another
>>>>> >>>>>> >>> >> >>>>> > program?
>>>>> >>>>>> >>> >> >>>>> > Did you configure it properly with setserial?
>>>>> >>>>>> >>> >> >>>>> > Please read the FAQ at
>>>>> >>>>>> >>> >> >>>>> > http://open.nit.ca/wiki/?WvDial
>>>>> >>>>>> >>> >> >>>>> > If you still have problems, send mail to
>>>>> >>>>>> >>> >> >>>>> > <wvdial-list@xxxxxxxxxxxx>.
>>>>> >>>>>> >>> >> >>>>> > basilis@basilis-laptop:~$ sudo slmodemd -c GREECE
>>>>> >>>>>> >>> >> >>>>> > --alsa
>>>>> >>>>>> >>> >> >>>>> > modem:1
>>>>> >>>>>> >>> >> >>>>> > error: mixer setup: attach hw:1 error: No such
>>>>> >>>>>> >>> >> >>>>> > file
>>>>> >>>>>> >>> >> >>>>> > or
>>>>> >>>>>> >>> >> >>>>> > directory
>>>>> >>>>>> >>> >> >>>>> > ALSA lib conf.c:3952:(snd_config_expand) Unknown
>>>>> >>>>>> >>> >> >>>>> > parameters
>>>>> >>>>>> 1
>>>>> >>>>>> >>> >> >>>>> > ALSA lib pcm.c:2211:(snd_pcm_open_noupdate)
>>>>> >>>>>> >>> >> >>>>> > Unknown
>>>>> >>>>>> >>> >> >>>>> > PCM
>>>>> >>>>>> >>> >> >>>>> > modem:1
>>>>> >>>>>> >>> >> >>>>> > error: alsa setup: cannot open playback device
>>>>> >>>>>> >>> >> >>>>> > 'modem:1':
>>>>> >>>>>> >>> >> >>>>> > Invalid
>>>>> >>>>>> >>> >> >>>>> > argument
>>>>> >>>>>> >>> >> >>>>> > error: cannot setup device `modem:1'
>>>>> >>>>>> >>> >> >>>>> > basilis@basilis-laptop:~$ sudo gedit
>>>>> >>>>>> >>> >> >>>>> > /etc/wvdial.conf
>>>>> >>>>>> >>> >> >>>>> > ##I put a # in front of the existing Init2 = ...
>>>>> >>>>>> >>> >> >>>>> > ##and added the Init2 = X3
>>>>> >>>>>> >>> >> >>>>> >
>>>>> >>>>>> >>> >> >>>>> > basilis@basilis-laptop:~$ sudo wvdial
>>>>> >>>>>> >>> >> >>>>> > --> WvDial: Internet dialer version 1.60
>>>>> >>>>>> >>> >> >>>>> > --> Cannot open /dev/ttySL0: No such file or
>>>>> >>>>>> >>> >> >>>>> > directory
>>>>> >>>>>> >>> >> >>>>> > --> Cannot open /dev/ttySL0: No such file or
>>>>> >>>>>> >>> >> >>>>> > directory
>>>>> >>>>>> >>> >> >>>>> > --> Cannot open /dev/ttySL0: No such file or
>>>>> >>>>>> >>> >> >>>>> > directory
>>>>> >>>>>> >>> >> >>>>> > basilis@basilis-laptop:~$ sudo slmodemd -c GREECE
>>>>> >>>>>> >>> >> >>>>> > --alsa
>>>>> >>>>>> >>> >> >>>>> > modem:1
>>>>> >>>>>> >>> >> >>>>> > error: mixer setup: attach hw:1 error: No such
>>>>> >>>>>> >>> >> >>>>> > file
>>>>> >>>>>> >>> >> >>>>> > or
>>>>> >>>>>> >>> >> >>>>> > directory
>>>>> >>>>>> >>> >> >>>>> > ALSA lib conf.c:3952:(snd_config_expand) Unknown
>>>>> >>>>>> >>> >> >>>>> > parameters
>>>>> >>>>>> 1
>>>>> >>>>>> >>> >> >>>>> > ALSA lib pcm.c:2211:(snd_pcm_open_noupdate)
>>>>> >>>>>> >>> >> >>>>> > Unknown
>>>>> >>>>>> >>> >> >>>>> > PCM
>>>>> >>>>>> >>> >> >>>>> > modem:1
>>>>> >>>>>> >>> >> >>>>> > error: alsa setup: cannot open playback device
>>>>> >>>>>> >>> >> >>>>> > 'modem:1':
>>>>> >>>>>> >>> >> >>>>> > Invalid
>>>>> >>>>>> >>> >> >>>>> > argument
>>>>> >>>>>> >>> >> >>>>> > error: cannot setup device `modem:1'
>>>>> >>>>>> >>> >> >>>>> > basilis@basilis-laptop:~$ modprobe -r
>>>>> >>>>>> >>> >> >>>>> > snd-intel8x0m
>>>>> >>>>>> >>> >> >>>>> > basilis@basilis-laptop:~$ sudo modprobe
>>>>> >>>>>> >>> >> >>>>> > snd-intel8x0m
>>>>> >>>>>> >>> >> >>>>> > basilis@basilis-laptop:~$ sudo slmodemd -c GREECE
>>>>> >>>>>> >>> >> >>>>> > --alsa
>>>>> >>>>>> >>> >> >>>>> > modem:1
>>>>> >>>>>> >>> >> >>>>> > SmartLink Soft Modem: version 2.9.11 Dec 3 2009
>>>>> >>>>>> >>> >> >>>>> > 16:59:30
>>>>> >>>>>> >>> >> >>>>> > symbolic link `/dev/ttySL0' -> `/dev/pts/1'
>>>>> >>>>>> >>> >> >>>>> > created.
>>>>> >>>>>> >>> >> >>>>> > modem `modem:1' created. TTY is `/dev/pts/1'
>>>>> >>>>>> >>> >> >>>>> > Use `/dev/ttySL0' as modem device, Ctrl+C for
>>>>> >>>>>> >>> >> >>>>> > termination.
>>>>> >>>>>> >>> >> >>>>> >
>>>>> >>>>>> >>> >> >>>>> > ##and in a new terminal:
>>>>> >>>>>> >>> >> >>>>> > basilis@basilis-laptop:~$ sudo wvdial
>>>>> >>>>>> >>> >> >>>>> > [sudo] password for basilis:
>>>>> >>>>>> >>> >> >>>>> > --> WvDial: Internet dialer version 1.60
>>>>> >>>>>> >>> >> >>>>> > --> Cannot get information for serial port.
>>>>> >>>>>> >>> >> >>>>> > --> Initializing modem.
>>>>> >>>>>> >>> >> >>>>> > --> Sending: ATZ
>>>>> >>>>>> >>> >> >>>>> > ATZ
>>>>> >>>>>> >>> >> >>>>> > OK
>>>>> >>>>>> >>> >> >>>>> > --> Sending: X3
>>>>> >>>>>> >>> >> >>>>> > X3
>>>>> >>>>>> >>> >> >>>>> >
>>>>> >>>>>> >>> >> >>>>> > --> Sending: ATQ0
>>>>> >>>>>> >>> >> >>>>> > ATQ0
>>>>> >>>>>> >>> >> >>>>> > OK
>>>>> >>>>>> >>> >> >>>>> > --> Re-Sending: X3
>>>>> >>>>>> >>> >> >>>>> > X3
>>>>> >>>>>> >>> >> >>>>> >
>>>>> >>>>>> >>> >> >>>>> > --> Modem not responding.
>>>>> >>>>>> >>> >> >>>>> > basilis@basilis-laptop:~$
>>>>> >>>>>> >>> >> >>>>> >
>>>>> >>>>>> >>> >> >>>>> >
>>>>> >>>>>> >>> >> >>>>> > ##trying with the stupid mode... (removed the #
>>>>> >>>>>> >>> >> >>>>> > in
>>>>> >>>>>> >>> >> >>>>> > front
>>>>> >>>>>> >>> >> >>>>> > of
>>>>> >>>>>> >>> >> >>>>> > the
>>>>> >>>>>> >>> >> >>>>> > "old"
>>>>> >>>>>> >>> >> >>>>> > Init2..., placed a # in front of the Init2 = X3
>>>>> >>>>>> >>> >> >>>>> > and
>>>>> >>>>>> >>> >> >>>>> > added
>>>>> >>>>>> the
>>>>> >>>>>> >>> >> >>>>> > Stupid...line
>>>>> >>>>>> >>> >> >>>>> > at the end, saved and [after activating the modem
>>>>> >>>>>> >>> >> >>>>> > in
>>>>> >>>>>> another
>>>>> >>>>>> >>> >> >>>>> > terminal]
>>>>> >>>>>> >>> >> >>>>> > basilis@basilis-laptop:~$ sudo wvdial
>>>>> >>>>>> >>> >> >>>>> > --> WvDial: Internet dialer version 1.60
>>>>> >>>>>> >>> >> >>>>> > --> Cannot get information for serial port.
>>>>> >>>>>> >>> >> >>>>> > --> Initializing modem.
>>>>> >>>>>> >>> >> >>>>> > --> Sending: ATZ
>>>>> >>>>>> >>> >> >>>>> > ATZ
>>>>> >>>>>> >>> >> >>>>> > OK
>>>>> >>>>>> >>> >> >>>>> > --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
>>>>> >>>>>> >>> >> >>>>> > ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
>>>>> >>>>>> >>> >> >>>>> > OK
>>>>> >>>>>> >>> >> >>>>> > --> Modem initialized.
>>>>> >>>>>> >>> >> >>>>> > --> Sending: ATDT8962514140
>>>>> >>>>>> >>> >> >>>>> > --> Waiting for carrier.
>>>>> >>>>>> >>> >> >>>>> > ATDT8962514140
>>>>> >>>>>> >>> >> >>>>> > NO DIALTONE
>>>>> >>>>>> >>> >> >>>>> > --> No dial tone.
>>>>> >>>>>> >>> >> >>>>> > --> Disconnecting at Sat Jan 30 17:46:50 2010
>>>>> >>>>>> >>> >> >>>>> > basilis@basilis-laptop:~$
>>>>> >>>>>> >>> >> >>>>> > I am connected to a fast dsl; i don't think there
>>>>> >>>>>> >>> >> >>>>> > is
>>>>> >>>>>> >>> >> >>>>> > a
>>>>> >>>>>> >>> >> >>>>> > dial
>>>>> >>>>>> >>> >> >>>>> > tone
>>>>> >>>>>> >>> >> >>>>> > here
>>>>> >>>>>> >>> >> >>>>> > anyway
>>>>> >>>>>> >>> >> >>>>> > - or is there??
>>>>> >>>>>> >>> >> >>>>> >
>>>>> >>>>>> >>> >> >>>>> > Στις 30 Ιανουαρίου 2010 6:03 π.μ., ο χρήστης
>>>>> >>>>>> >>> >> >>>>> > Marvin
>>>>> >>>>>> Stodolsky
>>>>> >>>>>> >>> >> >>>>> > <marvin.stodolsky@xxxxxxxxx> έγραψε:
>>>>> >>>>>> >>> >> >>>>> >>
>>>>> >>>>>> >>> >> >>>>> >> RE:
>>>>> >>>>>> >>> >> >>>>> >>
>>>>> >>>>>> >>> >> >>>>> >>
>>>>> >>>>>> >>> >> >>>>> >> 2010/1/29 Βασίλης <piperastaman@xxxxxxxxxxxxxx>:
>>>>> >>>>>> >>> >> >>>>> >> > Dear Marvin,
>>>>> >>>>>> >>> >> >>>>> >> > i think everything is ok.
>>>>> >>>>>> >>> >> >>>>> >> > and i say i think, because i don't have a
>>>>> >>>>>> >>> >> >>>>> >> > "normal"
>>>>> >>>>>> >>> >> >>>>> >> > phone
>>>>> >>>>>> >>> >> >>>>> >> > line
>>>>> >>>>>> >>> >> >>>>> >> > right
>>>>> >>>>>> >>> >> >>>>> >> > here, so
>>>>> >>>>>> >>> >> >>>>> >> > i cannot be sure of whether the problem is the
>>>>> >>>>>> >>> >> >>>>> >> > lack
>>>>> >>>>>> >>> >> >>>>> >> > of
>>>>> >>>>>> tone
>>>>> >>>>>> >>> >> >>>>> >> > or
>>>>> >>>>>> >>> >> >>>>> >> > the
>>>>> >>>>>> >>> >> >>>>> >> > incapability of the computer to trace it [i
>>>>> >>>>>> >>> >> >>>>> >> > would
>>>>> >>>>>> >>> >> >>>>> >> > say
>>>>> >>>>>> >>> >> >>>>> >> > i
>>>>> >>>>>> am
>>>>> >>>>>> >>> >> >>>>> >> > sure
>>>>> >>>>>> >>> >> >>>>> >> > everything
>>>>> >>>>>> >>> >> >>>>> >> > is fine]
>>>>> >>>>>> >>> >> >>>>> >> > at the end i did the new installation of 9.10
>>>>> >>>>>> >>> >> >>>>> >> > -
>>>>> >>>>>> >>> >> >>>>> >> > i
>>>>> >>>>>> >>> >> >>>>> >> > didn't
>>>>> >>>>>> >>> >> >>>>> >> > regret
>>>>> >>>>>> >>> >> >>>>> >> > it;
>>>>> >>>>>> >>> >> >>>>> >> > all seems to go faster now.
>>>>> >>>>>> >>> >> >>>>> >> > and i took all the modem steps one by one
>>>>> >>>>>> >>> >> >>>>> >> > {here
>>>>> >>>>>> >>> >> >>>>> >> > is
>>>>> >>>>>> >>> >> >>>>> >> > the
>>>>> >>>>>> last
>>>>> >>>>>> >>> >> >>>>> >> > bit:}
>>>>> >>>>>> >>> >> >>>>> >> > basilis@basilis-laptop:~$ sudo gedit
>>>>> >>>>>> >>> >> >>>>> >> > /etc/wvdial.conf
>>>>> >>>>>> >>> >> >>>>> >> > #added user, password, phone number and
>>>>> >>>>>> >>> >> >>>>> >> > carrier..
>>>>> >>>>>> >>> >> >>>>> >> > basilis@basilis-laptop:~$ sudo wvdial
>>>>> >>>>>> >>> >> >>>>> >> --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
>>>>> >>>>>> >>> >> >>>>> >> ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
>>>>> >>>>>> >>> >> >>>>> >> OK
>>>>> >>>>>> >>> >> >>>>> >> --> Modem initialized.
>>>>> >>>>>> >>> >> >>>>> >> --> Sending: ATDT8962514140
>>>>> >>>>>> >>> >> >>>>> >> --> Waiting for carrier.
>>>>> >>>>>> >>> >> >>>>> >> ATDT8962514140
>>>>> >>>>>> >>> >> >>>>> >> NO DIALTONE
>>>>> >>>>>> >>> >> >>>>> >> --> No dial tone.
>>>>> >>>>>> >>> >> >>>>> >> > --> WvDial: Internet dialer version 1.60
>>>>> >>>>>> >>> >> >>>>> >> > --> Cannot get information for serial port.
>>>>> >>>>>> >>> >> >>>>> >> > --> Initializing modem.
>>>>> >>>>>> >>> >> >>>>> >> > --> Sending: ATZ
>>>>> >>>>>> >>> >> >>>>> >> > ATZ
>>>>> >>>>>> >>> >> >>>>> >> > OK
>>>>> >>>>>> >>> >> >>>>> >> > --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
>>>>> >>>>>> >>> >> >>>>> >> > ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
>>>>> >>>>>> >>> >> >>>>> >> > OK
>>>>> >>>>>> >>> >> >>>>> >> > --> Modem initialized.
>>>>> >>>>>> >>> >> >>>>> >> > --> Sending: ATDT8962514140
>>>>> >>>>>> >>> >> >>>>> >> > --> Waiting for carrier.
>>>>> >>>>>> >>> >> >>>>> >> > ATDT8962514140
>>>>> >>>>>> >>> >> >>>>> >> > NO DIALTONE
>>>>> >>>>>> >>> >> >>>>> >> > --> No dial tone.
>>>>> >>>>>> >>> >> >>>>> >> ------
>>>>> >>>>>> >>> >> >>>>> >> The NO DIALTONE can be a consequence of low
>>>>> >>>>>> >>> >> >>>>> >> phone
>>>>> >>>>>> >>> >> >>>>> >> line
>>>>> >>>>>> >>> >> >>>>> >> voltage.
>>>>> >>>>>> >>> >> >>>>> >> Read the comments in wvdial.txt
>>>>> >>>>>> >>> >> >>>>> >> Try putting an X3 (dial without Dial Tone
>>>>> >>>>>> >>> >> >>>>> >> detection) in
>>>>> >>>>>> the
>>>>> >>>>>> >>> >> >>>>> >> line:
>>>>> >>>>>> >>> >> >>>>> >> Init2 =
>>>>> >>>>>> >>> >> >>>>> >> Another option is an added line:
>>>>> >>>>>> >>> >> >>>>> >> Stupid Mode = yes
>>>>> >>>>>> >>> >> >>>>> >> But try to avoid it as it shortcuts useful
>>>>> >>>>>> >>> >> >>>>> >> negotiation
>>>>> >>>>>> >>> >> >>>>> >> between
>>>>> >>>>>> >>> >> >>>>> >> your
>>>>> >>>>>> >>> >> >>>>> >> Modem and the Internet Provider.
>>>>> >>>>>> >>> >> >>>>> >>
>>>>> >>>>>> >>> >> >>>>> >> Note that there are:
>>>>> >>>>>> http://www.linux.org/groups/greece.html
>>>>> >>>>>> >>> >> >>>>> >> wherefrom you might get advice on local line
>>>>> >>>>>> >>> >> >>>>> >> conditions.
>>>>> >>>>>> >>> >> >>>>> >> If there are problems under a current kernel and
>>>>> >>>>>> >>> >> >>>>> >> an
>>>>> >>>>>> >>> >> >>>>> >> older
>>>>> >>>>>> one
>>>>> >>>>>> >>> >> >>>>> >> work,
>>>>> >>>>>> >>> >> >>>>> >> you can always reboot under the older kernel.
>>>>> >>>>>> >>> >> >>>>> >>
>>>>> >>>>>> >>> >> >>>>> >> MarvS
>>>>> >>>>>> >>> >> >>>>> >>
>>>>> >>>>>> >>> >> >>>>> >>
>>>>> >>>>>> >>> >> >>>>> >>
>>>>> >>>>>> >>> >> >>>>> >> > basilis@basilis-laptop:~$
>>>>> >>>>>> >>> >> >>>>> >> > Here is the whole procedure (copied-pasted)
>>>>> >>>>>> >>> >> >>>>> >> > and
>>>>> >>>>>> >>> >> >>>>> >> > attached
>>>>> >>>>>> >>> >> >>>>> >> > the
>>>>> >>>>>> >>> >> >>>>> >> > "new"
>>>>> >>>>>> >>> >> >>>>> >> > ModemData.txt
>>>>> >>>>>> >>> >> >>>>> >> > basilis@basilis-laptop:~$ cd Desktop
>>>>> >>>>>> >>> >> >>>>> >> > basilis@basilis-laptop:~/Desktop$ gunzip
>>>>> >>>>>> >>> >> >>>>> >> > scanModem.gz
>>>>> >>>>>> >>> >> >>>>> >> > basilis@basilis-laptop:~/Desktop$ chmod +x
>>>>> >>>>>> >>> >> >>>>> >> > scanModem
>>>>> >>>>>> >>> >> >>>>> >> > basilis@basilis-laptop:~/Desktop$ ./scanModem
>>>>> >>>>>> >>> >> >>>>> >> > UPDATE=2010_01_22
>>>>> >>>>>> >>> >> >>>>> >> > Continuing as this update is only 1 weeks
>>>>> >>>>>> >>> >> >>>>> >> > old,
>>>>> >>>>>> >>> >> >>>>> >> > but the current Update is always at:
>>>>> >>>>>> >>> >> >>>>> >> > http://linmodems.technion.ac.il
>>>>> >>>>>> >>> >> >>>>> >> >
>>>>> >>>>>> >>> >> >>>>> >> > Identifying PCI bus slots with candidate
>>>>> >>>>>> >>> >> >>>>> >> > modems.
>>>>> >>>>>> >>> >> >>>>> >> > Running PCIbus cases
>>>>> >>>>>> >>> >> >>>>> >> > Analysing card in PCI bus 00:1f.6, writing to
>>>>> >>>>>> >>> >> >>>>> >> > scanout.00:1f.6
>>>>> >>>>>> >>> >> >>>>> >> > Please load the candidate driver
>>>>> >>>>>> >>> >> >>>>> >> > snd-intel8x0m,
>>>>> >>>>>> >>> >> >>>>> >> > with
>>>>> >>>>>> >>> >> >>>>> >> > Admin/root
>>>>> >>>>>> >>> >> >>>>> >> > command:
>>>>> >>>>>> >>> >> >>>>> >> > sudo modprobe snd-intel8x0m
>>>>> >>>>>> >>> >> >>>>> >> > Then rerun
>>>>> >>>>>> >>> >> >>>>> >> > ./scanModem
>>>>> >>>>>> >>> >> >>>>> >> > basilis@basilis-laptop:~/Desktop$ sudo
>>>>> >>>>>> >>> >> >>>>> >> > modprobe
>>>>> >>>>>> >>> >> >>>>> >> > snd-intel8x0m
>>>>> >>>>>> >>> >> >>>>> >> > basilis@basilis-laptop:~/Desktop$ ./scanModem
>>>>> >>>>>> >>> >> >>>>> >> > UPDATE=2010_01_22
>>>>> >>>>>> >>> >> >>>>> >> > Continuing as this update is only 1 weeks
>>>>> >>>>>> >>> >> >>>>> >> > old,
>>>>> >>>>>> >>> >> >>>>> >> > but the current Update is always at:
>>>>> >>>>>> >>> >> >>>>> >> > http://linmodems.technion.ac.il
>>>>> >>>>>> >>> >> >>>>> >> > num=22
>>>>> >>>>>> >>> >> >>>>> >> > Identifying PCI bus slots with candidate
>>>>> >>>>>> >>> >> >>>>> >> > modems.
>>>>> >>>>>> >>> >> >>>>> >> > Running PCIbus cases
>>>>> >>>>>> >>> >> >>>>> >> > Analysing card in PCI bus 00:1f.6, writing to
>>>>> >>>>>> >>> >> >>>>> >> > scanout.00:1f.6
>>>>> >>>>>> >>> >> >>>>> >> > Using scanout.00:1f.6 data, and writing
>>>>> >>>>>> >>> >> >>>>> >> > guidance
>>>>> >>>>>> >>> >> >>>>> >> > to
>>>>> >>>>>> >>> >> >>>>> >> > ModemData.txt
>>>>> >>>>>> >>> >> >>>>> >> > Writing DOCs/Intel.txt
>>>>> >>>>>> >>> >> >>>>> >> > Writing DOCs/Smartlink.txt
>>>>> >>>>>> >>> >> >>>>> >> > Writing residual guidance customized to your
>>>>> >>>>>> >>> >> >>>>> >> > System.
>>>>> >>>>>> >>> >> >>>>> >> > A subfolder Modem/ has been written,
>>>>> >>>>>> >>> >> >>>>> >> > containing
>>>>> >>>>>> these
>>>>> >>>>>> >>> >> >>>>> >> > files
>>>>> >>>>>> >>> >> >>>>> >> > with
>>>>> >>>>>> >>> >> >>>>> >> > more
>>>>> >>>>>> >>> >> >>>>> >> > detailed Information:
>>>>> >>>>>> >>> >> >>>>> >> >
>>>>> >>>>>> >>> >> >>>>> >> >
>>>>> >>>>>> >>> >> >>>>> >> >
>>>>> >>>>>> >>> >> >>>>> >> >
>>>>> >>>>>> >>> >> >>>>> >> >
>>>>> >>>>>>
>>>>> >>>>>>
>>>>> >>>>>> ------------------------------------------------------------------------------------------
>>>>> >>>>>> >>> >> >>>>> >> > 1stRead.txt Bootup.txt dmesg.txt DOCs
>>>>> >>>>>> >>> >> >>>>> >> > ModemData.txt
>>>>> >>>>>> >>> >> >>>>> >> > scanout.00:1f.6
>>>>> >>>>>> >>> >> >>>>> >> > tmp
>>>>> >>>>>> >>> >> >>>>> >> > and in the DOCs subfolder:
>>>>> >>>>>> >>> >> >>>>> >> > DriverCompiling.txt InfoGeneral.txt
>>>>> >>>>>> >>> >> >>>>> >> > Intel.txt
>>>>> >>>>>> >>> >> >>>>> >> > Rational.txt
>>>>> >>>>>> >>> >> >>>>> >> > Smartlink.txt SoftModem.txt Testing.txt
>>>>> >>>>>> >>> >> >>>>> >> > UNSUBSCRIBE.txt
>>>>> >>>>>> >>> >> >>>>> >> > wvdial.txt YourSystem.txt
>>>>> >>>>>> >>> >> >>>>> >> >
>>>>> >>>>>> >>> >> >>>>> >> >
>>>>> >>>>>> >>> >> >>>>> >> >
>>>>> >>>>>> >>> >> >>>>> >> >
>>>>> >>>>>> >>> >> >>>>> >> >
>>>>> >>>>>>
>>>>> >>>>>> -------------------------------------------------------------------------------------------
>>>>> >>>>>> >>> >> >>>>> >> > Please read 1stRead.txt first for
>>>>> >>>>>> >>> >> >>>>> >> > Guidance.
>>>>> >>>>>> >>> >> >>>>> >> >
>>>>> >>>>>> >>> >> >>>>> >> > basilis@basilis-laptop:~/Desktop$
>>>>> >>>>>> >>> >> >>>>> >> >
>>>>> >>>>>> >>> >> >>>>> >> >
>>>>> >>>>>> >>> >> >>>>> >> >
>>>>> >>>>>> >>> >> >>>>> >> >
>>>>> >>>>>> >>> >> >>>>> >> > basilis@basilis-laptop:~/Desktop$ sudo dpkg -i
>>>>> >>>>>> dkms*.deb
>>>>> >>>>>> >>> >> >>>>> >> > [sudo] password for basilis:
>>>>> >>>>>> >>> >> >>>>> >> > dpkg: error processing dkms*.deb (--install):
>>>>> >>>>>> >>> >> >>>>> >> > cannot access archive: No such file or
>>>>> >>>>>> >>> >> >>>>> >> > directory
>>>>> >>>>>> >>> >> >>>>> >> > Errors were encountered while processing:
>>>>> >>>>>> >>> >> >>>>> >> > dkms*.deb
>>>>> >>>>>> >>> >> >>>>> >> > # i extract the slmodemd.. on the desktop
>>>>> >>>>>> >>> >> >>>>> >> > basilis@basilis-laptop:~/Desktop$ cd
>>>>> >>>>>> >>> >> >>>>> >> > /home/basilis/Desktop/SLMODEMD_gcc4.4_alsa1.0.21
>>>>> >>>>>> >>> >> >>>>> >> > basilis@basilis-laptop
>>>>> >>>>>> :~/Desktop/SLMODEMD_gcc4.4_alsa1.0.21$
>>>>> >>>>>> >>> >> >>>>> >> > sudo
>>>>> >>>>>> >>> >> >>>>> >> > ./setup
>>>>> >>>>>> >>> >> >>>>> >> > Installing slmodemd helper to
>>>>> >>>>>> >>> >> >>>>> >> > /usr/sbin/slmodemd
>>>>> >>>>>> >>> >> >>>>> >> > Writing log to slmodemd_Inst.txt
>>>>> >>>>>> >>> >> >>>>> >> > ./setup: 14: slmodemd: not found
>>>>> >>>>>> >>> >> >>>>> >> > Copying slmodemd to /usr/sbin/slmodemd, making
>>>>> >>>>>> exectuable,
>>>>> >>>>>> >>> >> >>>>> >> > and
>>>>> >>>>>> >>> >> >>>>> >> > checking
>>>>> >>>>>> >>> >> >>>>> >> > for
>>>>> >>>>>> >>> >> >>>>> >> > version 2.9.11
>>>>> >>>>>> >>> >> >>>>> >> > SmartLink Soft Modem: version 2.9.11 Dec 3
>>>>> >>>>>> >>> >> >>>>> >> > 2009
>>>>> >>>>>> 16:59:30
>>>>> >>>>>> >>> >> >>>>> >> > Version verified: 2.9.11
>>>>> >>>>>> >>> >> >>>>> >> > Read the slmodemd_Inst.txt
>>>>> >>>>>> >>> >> >>>>> >> > There is already installed a slmodemd of
>>>>> >>>>>> >>> >> >>>>> >> > version:
>>>>> >>>>>> >>> >> >>>>> >> > 2.9.11
>>>>> >>>>>> >>> >> >>>>> >> > There is a file /usr/sbin/slmodemd
>>>>> >>>>>> >>> >> >>>>> >> > Moving /usr/sbin/slmodemd to
>>>>> >>>>>> >>> >> >>>>> >> > /usr/sbin/slmodemd.2.9.11
>>>>> >>>>>> >>> >> >>>>> >> > Copying slmodemd to /usr/sbin/slmodemd, making
>>>>> >>>>>> exectuable,
>>>>> >>>>>> >>> >> >>>>> >> > and
>>>>> >>>>>> >>> >> >>>>> >> > checking
>>>>> >>>>>> >>> >> >>>>> >> > for
>>>>> >>>>>> >>> >> >>>>> >> > version 2.9.11
>>>>> >>>>>> >>> >> >>>>> >> > SmartLink Soft Modem: version 2.9.11 Dec 3
>>>>> >>>>>> >>> >> >>>>> >> > 2009
>>>>> >>>>>> 16:59:30
>>>>> >>>>>> >>> >> >>>>> >> > Version verified: 2.9.11
>>>>> >>>>>> >>> >> >>>>> >> > Read the slmodemd_Inst.txt
>>>>> >>>>>> >>> >> >>>>> >> > basilis@basilis-laptop
>>>>> >>>>>> :~/Desktop/SLMODEMD_gcc4.4_alsa1.0.21$
>>>>> >>>>>> >>> >> >>>>> >> >
>>>>> >>>>>> >>> >> >>>>> >> >
>>>>> >>>>>> >>> >> >>>>> >> > #i install wvdial and:
>>>>> >>>>>> >>> >> >>>>> >> > basilis@basilis-laptop:~$ sudo wvdialconf
>>>>> >>>>>> >>> >> >>>>> >> > [sudo] password for basilis:
>>>>> >>>>>> >>> >> >>>>> >> > Editing `/etc/wvdial.conf'.
>>>>> >>>>>> >>> >> >>>>> >> > Scanning your serial ports for a modem.
>>>>> >>>>>> >>> >> >>>>> >> > Modem Port Scan<*1>: S0 S1 S2 S3
>>>>> >>>>>> >>> >> >>>>> >> > WvModem<*1>: Cannot get information for serial
>>>>> >>>>>> >>> >> >>>>> >> > port.
>>>>> >>>>>> >>> >> >>>>> >> > ttySL0<*1>: ATQ0 V1 E1 -- OK
>>>>> >>>>>> >>> >> >>>>> >> > ttySL0<*1>: ATQ0 V1 E1 Z -- OK
>>>>> >>>>>> >>> >> >>>>> >> > ttySL0<*1>: ATQ0 V1 E1 S0=0 -- OK
>>>>> >>>>>> >>> >> >>>>> >> > ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
>>>>> >>>>>> >>> >> >>>>> >> > ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
>>>>> >>>>>> >>> >> >>>>> >> > ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
>>>>> >>>>>> >>> >> >>>>> >> > --
>>>>> >>>>>> >>> >> >>>>> >> > OK
>>>>> >>>>>> >>> >> >>>>> >> > ttySL0<*1>: Modem Identifier: ATI -- SmartLink
>>>>> >>>>>> >>> >> >>>>> >> > Soft
>>>>> >>>>>> Modem
>>>>> >>>>>> >>> >> >>>>> >> > ttySL0<*1>: Speed 4800: AT -- OK
>>>>> >>>>>> >>> >> >>>>> >> > ttySL0<*1>: Speed 9600: AT -- OK
>>>>> >>>>>> >>> >> >>>>> >> > ttySL0<*1>: Speed 19200: AT -- OK
>>>>> >>>>>> >>> >> >>>>> >> > ttySL0<*1>: Speed 38400: AT -- OK
>>>>> >>>>>> >>> >> >>>>> >> > ttySL0<*1>: Speed 57600: AT -- OK
>>>>> >>>>>> >>> >> >>>>> >> > ttySL0<*1>: Speed 115200: AT -- OK
>>>>> >>>>>> >>> >> >>>>> >> > ttySL0<*1>: Speed 230400: AT -- OK
>>>>> >>>>>> >>> >> >>>>> >> > ttySL0<*1>: Speed 460800: AT -- OK
>>>>> >>>>>> >>> >> >>>>> >> > ttySL0<*1>: Max speed is 460800; that should
>>>>> >>>>>> >>> >> >>>>> >> > be
>>>>> >>>>>> >>> >> >>>>> >> > safe.
>>>>> >>>>>> >>> >> >>>>> >> > ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
>>>>> >>>>>> >>> >> >>>>> >> > --
>>>>> >>>>>> >>> >> >>>>> >> > OK
>>>>> >>>>>> >>> >> >>>>> >> > Found a modem on /dev/ttySL0.
>>>>> >>>>>> >>> >> >>>>> >> > Modem configuration written to
>>>>> >>>>>> >>> >> >>>>> >> > /etc/wvdial.conf.
>>>>> >>>>>> >>> >> >>>>> >> > ttySL0<Info>: Speed 460800; init "ATQ0 V1 E1
>>>>> >>>>>> >>> >> >>>>> >> > S0=0
>>>>> >>>>>> >>> >> >>>>> >> > &C1
>>>>> >>>>>> &D2
>>>>> >>>>>> >>> >> >>>>> >> > +FCLASS=0"
>>>>> >>>>>> >>> >> >>>>> >> > basilis@basilis-laptop:~$ sudo gedit
>>>>> >>>>>> >>> >> >>>>> >> > /etc/wvdial.conf
>>>>> >>>>>> >>> >> >>>>> >> > #added user, password, phone number and
>>>>> >>>>>> >>> >> >>>>> >> > carrier..
>>>>> >>>>>> >>> >> >>>>> >> > basilis@basilis-laptop:~$ sudo wvdial
>>>>> >>>>>> >>> >> >>>>> >> > --> WvDial: Internet dialer version 1.60
>>>>> >>>>>> >>> >> >>>>> >> > --> Cannot get information for serial port.
>>>>> >>>>>> >>> >> >>>>> >> > --> Initializing modem.
>>>>> >>>>>> >>> >> >>>>> >> > --> Sending: ATZ
>>>>> >>>>>> >>> >> >>>>> >> > ATZ
>>>>> >>>>>> >>> >> >>>>> >> > OK
>>>>> >>>>>> >>> >> >>>>> >> > --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
>>>>> >>>>>> >>> >> >>>>> >> > ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
>>>>> >>>>>> >>> >> >>>>> >> > OK
>>>>> >>>>>> >>> >> >>>>> >> > --> Modem initialized.
>>>>> >>>>>> >>> >> >>>>> >> > --> Sending: ATDT8962514140
>>>>> >>>>>> >>> >> >>>>> >> > --> Waiting for carrier.
>>>>> >>>>>> >>> >> >>>>> >> > ATDT8962514140
>>>>> >>>>>> >>> >> >>>>> >> > NO DIALTONE
>>>>> >>>>>> >>> >> >>>>> >> > --> No dial tone.
>>>>> >>>>>> >>> >> >>>>> >> > --> Disconnecting at Sat Jan 30 03:51:22 2010
>>>>> >>>>>> >>> >> >>>>> >> > basilis@basilis-laptop:~$
>>>>> >>>>>> >>> >> >>>>> >> >
>>>>> >>>>>> >>> >> >>>>> >> > i guess it 's just because i am connected to a
>>>>> >>>>>> >>> >> >>>>> >> > high
>>>>> >>>>>> speed
>>>>> >>>>>> >>> >> >>>>> >> > dsl,
>>>>> >>>>>> >>> >> >>>>> >> > no?...
>>>>> >>>>>> >>> >> >>>>> >> > i can't wait to try it on a telephone line !
>>>>> >>>>>> >>> >> >>>>> >> >
>>>>> >>>>>> >>> >> >>>>> >> > Hopefully by monday (i shall be back in the
>>>>> >>>>>> >>> >> >>>>> >> > village)
>>>>> >>>>>> >>> >> >>>>> >> > i
>>>>> >>>>>> will
>>>>> >>>>>> >>> >> >>>>> >> > be
>>>>> >>>>>> >>> >> >>>>> >> > able
>>>>> >>>>>> >>> >> >>>>> >> > to
>>>>> >>>>>> >>> >> >>>>> >> > express you my gratitude from my 2nd(!!!)
>>>>> >>>>>> >>> >> >>>>> >> > ubuntu-dial-up
>>>>> >>>>>> >>> >> >>>>> >> > connection
>>>>> >>>>>> >>> >> >>>>> >> > !
>>>>> >>>>>> >>> >> >>>>> >> > Again thankyou so much - i have learned so
>>>>> >>>>>> >>> >> >>>>> >> > much;
>>>>> >>>>>> >>> >> >>>>> >> > and
>>>>> >>>>>> >>> >> >>>>> >> > the
>>>>> >>>>>> >>> >> >>>>> >> > achievement...
>>>>> >>>>>> >>> >> >>>>> >> > THANKYOU
>>>>> >>>>>> >>> >> >>>>> >> > Βασίλης
>>>>> >>>>>> >>> >> >>>>> >> >
>>>>> >>>>>> >>> >> >>>>> >> > Στις 30 Ιανουαρίου 2010 2:38 π.μ., ο χρήστης
>>>>> >>>>>> >>> >> >>>>> >> > Marvin
>>>>> >>>>>> >>> >> >>>>> >> > Stodolsky
>>>>> >>>>>> >>> >> >>>>> >> > <marvin.stodolsky@xxxxxxxxx> έγραψε:
>>>>> >>>>>> >>> >> >>>>> >> >>
>>>>> >>>>>> >>> >> >>>>> >> >> With
>>>>> >>>>>> >>> >> >>>>> >> >> $ sudo gedit /etc/wvdial.conf
>>>>> >>>>>> >>> >> >>>>> >> >>
>>>>> >>>>>> >>> >> >>>>> >> >> change:
>>>>> >>>>>> >>> >> >>>>> >> >> ; Phone = <Target Phone Number>
>>>>> >>>>>> >>> >> >>>>> >> >> ; Password = <Your Password>
>>>>> >>>>>> >>> >> >>>>> >> >> ; Username = <Your Login Name>
>>>>> >>>>>> >>> >> >>>>> >> >>
>>>>> >>>>>> >>> >> >>>>> >> >> to:
>>>>> >>>>>> >>> >> >>>>> >> >> Phone = IP_Phone_Number
>>>>> >>>>>> >>> >> >>>>> >> >> Password = Login_Password
>>>>> >>>>>> >>> >> >>>>> >> >> Username = Your_Login_Name
>>>>> >>>>>> >>> >> >>>>> >> >> Carrier Check = no
>>>>> >>>>>> >>> >> >>>>> >> >>
>>>>> >>>>>> >>> >> >>>>> >> >> MarvS
>>>>> >>>>>> >>> >> >>>>> >> >>
>>>>> >>>>>> >>> >> >>>>> >> >> Activate the modem, open a 2nd console or
>>>>> >>>>>> >>> >> >>>>> >> >> TAB.
>>>>> >>>>>> >>> >> >>>>> >> >> Therein:
>>>>> >>>>>> >>> >> >>>>> >> >> $ sudo wvdial
>>>>> >>>>>> >>> >> >>>>> >> >>
>>>>> >>>>>> >>> >> >>>>> >> >> MarvS
>>>>> >>>>>> >>> >> >>>>> >> >>
>>>>> >>>>>> >>> >> >>>>> >> >>
>>>>> >>>>>> >>> >> >>>>> >> >> 2010/1/29 Βασίλης
>>>>> >>>>>> >>> >> >>>>> >> >> <piperastaman@xxxxxxxxxxxxxx>:
>>>>> >>>>>> >>> >> >>>>> >> >> > basilis@aleo:~$ sudo slmodemd -c GREECE
>>>>> >>>>>> >>> >> >>>>> >> >> > --alsa
>>>>> >>>>>> modem:1
>>>>> >>>>>> >>> >> >>>>> >> >> > [sudo] password for basilis:
>>>>> >>>>>> >>> >> >>>>> >> >> > error: mixer setup: attach hw:1 error: No
>>>>> >>>>>> >>> >> >>>>> >> >> > such
>>>>> >>>>>> >>> >> >>>>> >> >> > file
>>>>> >>>>>> or
>>>>> >>>>>> >>> >> >>>>> >> >> > directory
>>>>> >>>>>> >>> >> >>>>> >> >> > ALSA lib conf.c:3952:(snd_config_expand)
>>>>> >>>>>> >>> >> >>>>> >> >> > Unknown
>>>>> >>>>>> >>> >> >>>>> >> >> > parameters
>>>>> >>>>>> >>> >> >>>>> >> >> > 1
>>>>> >>>>>> >>> >> >>>>> >> >> > ALSA lib pcm.c:2211:(snd_pcm_open_noupdate)
>>>>> >>>>>> >>> >> >>>>> >> >> > Unknown
>>>>> >>>>>> PCM
>>>>> >>>>>> >>> >> >>>>> >> >> > modem:1
>>>>> >>>>>> >>> >> >>>>> >> >> > error: alsa setup: cannot open playback
>>>>> >>>>>> >>> >> >>>>> >> >> > device
>>>>> >>>>>> >>> >> >>>>> >> >> > 'modem:1':
>>>>> >>>>>> >>> >> >>>>> >> >> > Invalid
>>>>> >>>>>> >>> >> >>>>> >> >> > argument
>>>>> >>>>>> >>> >> >>>>> >> >> > error: cannot setup device `modem:1'
>>>>> >>>>>> >>> >> >>>>> >> >> > basilis@aleo:~$ sudo modprobe snd-intel8x0m
>>>>> >>>>>> >>> >> >>>>> >> >> > basilis@aleo:~$ sudo slmodemd -c GREECE
>>>>> >>>>>> >>> >> >>>>> >> >> > --alsa
>>>>> >>>>>> modem:1
>>>>> >>>>>> >>> >> >>>>> >> >> > SmartLink Soft Modem: version 2.9.11 Dec 3
>>>>> >>>>>> >>> >> >>>>> >> >> > 2009
>>>>> >>>>>> >>> >> >>>>> >> >> > 16:59:30
>>>>> >>>>>> >>> >> >>>>> >> >> > symbolic link `/dev/ttySL0' -> `/dev/pts/1'
>>>>> >>>>>> >>> >> >>>>> >> >> > created.
>>>>> >>>>>> >>> >> >>>>> >> >> > modem `modem:1' created. TTY is
>>>>> >>>>>> >>> >> >>>>> >> >> > `/dev/pts/1'
>>>>> >>>>>> >>> >> >>>>> >> >> > Use `/dev/ttySL0' as modem device, Ctrl+C
>>>>> >>>>>> >>> >> >>>>> >> >> > for
>>>>> >>>>>> >>> >> >>>>> >> >> > termination.
>>>>> >>>>>> >>> >> >>>>> >> >> >
>>>>> >>>>>> >>> >> >>>>> >> >> > ...left running...
>>>>> >>>>>> >>> >> >>>>> >> >> > opened a new console
>>>>> >>>>>> >>> >> >>>>> >> >> >
>>>>> >>>>>> >>> >> >>>>> >> >> > basilis@aleo:~$ sudo wvdialconf
>>>>> >>>>>> >>> >> >>>>> >> >> > [sudo] password for basilis:
>>>>> >>>>>> >>> >> >>>>> >> >> > Editing `/etc/wvdial.conf'.
>>>>> >>>>>> >>> >> >>>>> >> >> >
>>>>> >>>>>> >>> >> >>>>> >> >> > Scanning your serial ports for a modem.
>>>>> >>>>>> >>> >> >>>>> >> >> >
>>>>> >>>>>> >>> >> >>>>> >> >> > Modem Port Scan<*1>: S0 S1 S2 S3
>>>>> >>>>>> >>> >> >>>>> >> >> > WvModem<*1>: Cannot get information for
>>>>> >>>>>> >>> >> >>>>> >> >> > serial
>>>>> >>>>>> >>> >> >>>>> >> >> > port.
>>>>> >>>>>> >>> >> >>>>> >> >> > ttySL0<*1>: ATQ0 V1 E1 -- OK
>>>>> >>>>>> >>> >> >>>>> >> >> > ttySL0<*1>: ATQ0 V1 E1 Z -- OK
>>>>> >>>>>> >>> >> >>>>> >> >> > ttySL0<*1>: ATQ0 V1 E1 S0=0 -- OK
>>>>> >>>>>> >>> >> >>>>> >> >> > ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
>>>>> >>>>>> >>> >> >>>>> >> >> > ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
>>>>> >>>>>> >>> >> >>>>> >> >> > ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2
>>>>> >>>>>> >>> >> >>>>> >> >> > +FCLASS=0
>>>>> >>>>>> >>> >> >>>>> >> >> > --
>>>>> >>>>>> >>> >> >>>>> >> >> > OK
>>>>> >>>>>> >>> >> >>>>> >> >> > ttySL0<*1>: Modem Identifier: ATI --
>>>>> >>>>>> >>> >> >>>>> >> >> > SmartLink
>>>>> >>>>>> >>> >> >>>>> >> >> > Soft
>>>>> >>>>>> >>> >> >>>>> >> >> > Modem
>>>>> >>>>>> >>> >> >>>>> >> >> > ttySL0<*1>: Speed 4800: AT -- OK
>>>>> >>>>>> >>> >> >>>>> >> >> > ttySL0<*1>: Speed 9600: AT -- OK
>>>>> >>>>>> >>> >> >>>>> >> >> > ttySL0<*1>: Speed 19200: AT -- OK
>>>>> >>>>>> >>> >> >>>>> >> >> > ttySL0<*1>: Speed 38400: AT -- OK
>>>>> >>>>>> >>> >> >>>>> >> >> > ttySL0<*1>: Speed 57600: AT -- OK
>>>>> >>>>>> >>> >> >>>>> >> >> > ttySL0<*1>: Speed 115200: AT -- OK
>>>>> >>>>>> >>> >> >>>>> >> >> > ttySL0<*1>: Speed 230400: AT -- OK
>>>>> >>>>>> >>> >> >>>>> >> >> > ttySL0<*1>: Speed 460800: AT -- OK
>>>>> >>>>>> >>> >> >>>>> >> >> > ttySL0<*1>: Max speed is 460800; that
>>>>> >>>>>> >>> >> >>>>> >> >> > should
>>>>> >>>>>> >>> >> >>>>> >> >> > be
>>>>> >>>>>> >>> >> >>>>> >> >> > safe.
>>>>> >>>>>> >>> >> >>>>> >> >> > ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2
>>>>> >>>>>> >>> >> >>>>> >> >> > +FCLASS=0
>>>>> >>>>>> >>> >> >>>>> >> >> > --
>>>>> >>>>>> >>> >> >>>>> >> >> > OK
>>>>> >>>>>> >>> >> >>>>> >> >> >
>>>>> >>>>>> >>> >> >>>>> >> >> > Found a modem on /dev/ttySL0.
>>>>> >>>>>> >>> >> >>>>> >> >> > Modem configuration written to
>>>>> >>>>>> >>> >> >>>>> >> >> > /etc/wvdial.conf.
>>>>> >>>>>> >>> >> >>>>> >> >> > ttySL0<Info>: Speed 460800; init "ATQ0 V1
>>>>> >>>>>> >>> >> >>>>> >> >> > E1
>>>>> >>>>>> >>> >> >>>>> >> >> > S0=0
>>>>> >>>>>> >>> >> >>>>> >> >> > &C1
>>>>> >>>>>> >>> >> >>>>> >> >> > &D2
>>>>> >>>>>> >>> >> >>>>> >> >> > +FCLASS=0"
>>>>> >>>>>> >>> >> >>>>> >> >> > basilis@aleo:~$ sudo gedit /etc/wvdial.conf
>>>>> >>>>>> >>> >> >>>>> >> >> >
>>>>> >>>>>> >>> >> >>>>> >> >> > ...and saw:
>>>>> >>>>>> >>> >> >>>>> >> >> >
>>>>> >>>>>> >>> >> >>>>> >> >> >
>>>>> >>>>>> >>> >> >>>>> >> >> > [Dialer Defaults]
>>>>> >>>>>> >>> >> >>>>> >> >> > Init1 = ATZ
>>>>> >>>>>> >>> >> >>>>> >> >> > Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
>>>>> >>>>>> >>> >> >>>>> >> >> > Modem Type = Analog Modem
>>>>> >>>>>> >>> >> >>>>> >> >> > Baud = 460800
>>>>> >>>>>> >>> >> >>>>> >> >> > New PPPD = yes
>>>>> >>>>>> >>> >> >>>>> >> >> > Modem = /dev/ttySL0
>>>>> >>>>>> >>> >> >>>>> >> >> > ISDN = 0
>>>>> >>>>>> >>> >> >>>>> >> >> > ; Phone = <Target Phone Number>
>>>>> >>>>>> >>> >> >>>>> >> >> > ; Password = <Your Password>
>>>>> >>>>>> >>> >> >>>>> >> >> > ; Username = <Your Login Name>
>>>>> >>>>>> >>> >> >>>>> >> >> >
>>>>> >>>>>> >>> >> >>>>> >> >> >
>>>>> >>>>>> >>> >> >>>>> >> >> > it looks on the right path, no?
>>>>> >>>>>> >>> >> >>>>> >> >> >
>>>>> >>>>>> >>> >> >>>>> >> >> > ...even though yesterday it suddenly
>>>>> >>>>>> >>> >> >>>>> >> >> > stopped
>>>>> >>>>>> >>> >> >>>>> >> >> > being
>>>>> >>>>>> >>> >> >>>>> >> >> > connected
>>>>> >>>>>> >>> >> >>>>> >> >> > on
>>>>> >>>>>> >>> >> >>>>> >> >> > the
>>>>> >>>>>> >>> >> >>>>> >> >> > internet
>>>>> >>>>>> >>> >> >>>>> >> >> > and no matter how many times i did restart,
>>>>> >>>>>> >>> >> >>>>> >> >> > it
>>>>> >>>>>> wouldn't
>>>>> >>>>>> >>> >> >>>>> >> >> > connect...[maybe
>>>>> >>>>>> >>> >> >>>>> >> >> > it
>>>>> >>>>>> >>> >> >>>>> >> >> > was a problem with the modem of my friend's
>>>>> >>>>>> >>> >> >>>>> >> >> > house]
>>>>> >>>>>> {in
>>>>> >>>>>> >>> >> >>>>> >> >> > fact
>>>>> >>>>>> >>> >> >>>>> >> >> > i
>>>>> >>>>>> >>> >> >>>>> >> >> > brought
>>>>> >>>>>> >>> >> >>>>> >> >> > the
>>>>> >>>>>> >>> >> >>>>> >> >> > computer here* today in order to reinstall
>>>>> >>>>>> >>> >> >>>>> >> >> > 9.10
>>>>> >>>>>> >>> >> >>>>> >> >> > with
>>>>> >>>>>> a
>>>>> >>>>>> >>> >> >>>>> >> >> > parallel
>>>>> >>>>>> >>> >> >>>>> >> >> > xp
>>>>> >>>>>> >>> >> >>>>> >> >> > -
>>>>> >>>>>> >>> >> >>>>> >> >> > but
>>>>> >>>>>> >>> >> >>>>> >> >> > since i reconnected i don't see any point
>>>>> >>>>>> >>> >> >>>>> >> >> > doing
>>>>> >>>>>> >>> >> >>>>> >> >> > so.
>>>>> >>>>>> and
>>>>> >>>>>> >>> >> >>>>> >> >> > if
>>>>> >>>>>> >>> >> >>>>> >> >> > this
>>>>> >>>>>> >>> >> >>>>> >> >> > goes
>>>>> >>>>>> >>> >> >>>>> >> >> > as
>>>>> >>>>>> >>> >> >>>>> >> >> > successfull as the other one in athens, i
>>>>> >>>>>> >>> >> >>>>> >> >> > don't
>>>>> >>>>>> >>> >> >>>>> >> >> > need
>>>>> >>>>>> the
>>>>> >>>>>> >>> >> >>>>> >> >> > dual
>>>>> >>>>>> >>> >> >>>>> >> >> > installation!}
>>>>> >>>>>> >>> >> >>>>> >> >> >
>>>>> >>>>>> >>> >> >>>>> >> >> > *now i am in mitilini (the capital of the
>>>>> >>>>>> >>> >> >>>>> >> >> > island
>>>>> >>>>>> lesbos;
>>>>> >>>>>> >>> >> >>>>> >> >> > here
>>>>> >>>>>> >>> >> >>>>> >> >> > there
>>>>> >>>>>> >>> >> >>>>> >> >> > is a
>>>>> >>>>>> >>> >> >>>>> >> >> > university, so the internet right now is
>>>>> >>>>>> >>> >> >>>>> >> >> > the
>>>>> >>>>>> >>> >> >>>>> >> >> > FASTEST
>>>>> >>>>>> one
>>>>> >>>>>> >>> >> >>>>> >> >> > can
>>>>> >>>>>> >>> >> >>>>> >> >> > have
>>>>> >>>>>> >>> >> >>>>> >> >> > in
>>>>> >>>>>> >>> >> >>>>> >> >> > greece
>>>>> >>>>>> >>> >> >>>>> >> >> > [after the army i suppose... :-( )
>>>>> >>>>>> >>> >> >>>>> >> >> >
>>>>> >>>>>> >>> >> >>>>> >> >> > if everything goes well, will i still be
>>>>> >>>>>> >>> >> >>>>> >> >> > able
>>>>> >>>>>> >>> >> >>>>> >> >> > to
>>>>> >>>>>> >>> >> >>>>> >> >> > test
>>>>> >>>>>> >>> >> >>>>> >> >> > the
>>>>> >>>>>> >>> >> >>>>> >> >> > dial-up
>>>>> >>>>>> >>> >> >>>>> >> >> > connection
>>>>> >>>>>> >>> >> >>>>> >> >> > here or will i have to go somewhere with an
>>>>> >>>>>> >>> >> >>>>> >> >> > isdn
>>>>> >>>>>> (pstn?)
>>>>> >>>>>> >>> >> >>>>> >> >> > only
>>>>> >>>>>> >>> >> >>>>> >> >> > telephone
>>>>> >>>>>> >>> >> >>>>> >> >> > line?
>>>>> >>>>>> >>> >> >>>>> >> >> >
>>>>> >>>>>> >>> >> >>>>> >> >> > should i just give the data to the
>>>>> >>>>>> >>> >> >>>>> >> >> > password,
>>>>> >>>>>> >>> >> >>>>> >> >> > user,
>>>>> >>>>>> >>> >> >>>>> >> >> > number
>>>>> >>>>>> >>> >> >>>>> >> >> > etc
>>>>> >>>>>> >>> >> >>>>> >> >> > (removing
>>>>> >>>>>> >>> >> >>>>> >> >> > the
>>>>> >>>>>> >>> >> >>>>> >> >> > ";") or what is the next step? i am very
>>>>> >>>>>> >>> >> >>>>> >> >> > eager
>>>>> >>>>>> >>> >> >>>>> >> >> > to
>>>>> >>>>>> >>> >> >>>>> >> >> > continue!
>>>>> >>>>>> >>> >> >>>>> >> >> >
>>>>> >>>>>> >>> >> >>>>> >> >> > Βασίλης
>>>>> >>>>>> >>> >> >>>>> >> >> >
>>>>> >>>>>> >>> >> >>>>> >> >> >
>>>>> >>>>>> >>> >> >>>>> >> >> > Στις 28 Ιανουαρίου 2010 3:32 μ.μ., ο
>>>>> >>>>>> >>> >> >>>>> >> >> > χρήστης
>>>>> >>>>>> >>> >> >>>>> >> >> > Marvin
>>>>> >>>>>> >>> >> >>>>> >> >> > Stodolsky
>>>>> >>>>>> >>> >> >>>>> >> >> > <marvin.stodolsky@xxxxxxxxx> έγραψε:
>>>>> >>>>>> >>> >> >>>>> >> >> >>
>>>>> >>>>>> >>> >> >>>>> >> >> >> Βασίλης
>>>>> >>>>>> >>> >> >>>>> >> >> >>
>>>>> >>>>>> >>> >> >>>>> >> >> >> You are doing fine. OK through:
>>>>> >>>>>> >>> >> >>>>> >> >> >> ---------------
>>>>> >>>>>> >>> >> >>>>> >> >> >> $ sudo slmodemd -c GREECE --alsa modem:1
>>>>> >>>>>> >>> >> >>>>> >> >> >> SmartLink Soft Modem: version 2.9.11 Dec
>>>>> >>>>>> >>> >> >>>>> >> >> >> 3
>>>>> >>>>>> >>> >> >>>>> >> >> >> 2009
>>>>> >>>>>> >>> >> >>>>> >> >> >> 16:59:30
>>>>> >>>>>> >>> >> >>>>> >> >> >> symbolic link `/dev/ttySL0' ->
>>>>> >>>>>> >>> >> >>>>> >> >> >> `/dev/pts/1'
>>>>> >>>>>> >>> >> >>>>> >> >> >> created.
>>>>> >>>>>> >>> >> >>>>> >> >> >> modem `modem:1' created. TTY is
>>>>> >>>>>> >>> >> >>>>> >> >> >> `/dev/pts/1'
>>>>> >>>>>> >>> >> >>>>> >> >> >> Use `/dev/ttySL0' as modem device, Ctrl+C
>>>>> >>>>>> >>> >> >>>>> >> >> >> for
>>>>> >>>>>> >>> >> >>>>> >> >> >> termination.
>>>>> >>>>>> >>> >> >>>>> >> >> >> ---------------
>>>>> >>>>>> >>> >> >>>>> >> >> >>
>>>>> >>>>>> >>> >> >>>>> >> >> >> Leave slmodemd running. Then open a 2nd
>>>>> >>>>>> >>> >> >>>>> >> >> >> console
>>>>> >>>>>> >>> >> >>>>> >> >> >> or
>>>>> >>>>>> TAB
>>>>> >>>>>> >>> >> >>>>> >> >> >> on
>>>>> >>>>>> >>> >> >>>>> >> >> >> the
>>>>> >>>>>> >>> >> >>>>> >> >> >> current
>>>>> >>>>>> >>> >> >>>>> >> >> >> one, and check for modem detection with:
>>>>> >>>>>> >>> >> >>>>> >> >> >> $ sudo wvdialconf
>>>>> >>>>>> >>> >> >>>>> >> >> >>
>>>>> >>>>>> >>> >> >>>>> >> >> >> If detected, see the wvdial.txt on doing
>>>>> >>>>>> >>> >> >>>>> >> >> >> an
>>>>> >>>>>> >>> >> >>>>> >> >> >> edit
>>>>> >>>>>> with:
>>>>> >>>>>> >>> >> >>>>> >> >> >> $ sudo gedit /etc/wvdial.conf
>>>>> >>>>>> >>> >> >>>>> >> >> >>
>>>>> >>>>>> >>> >> >>>>> >> >> >> If you want to do a wvdialconf test in the
>>>>> >>>>>> >>> >> >>>>> >> >> >> future,
>>>>> >>>>>> >>> >> >>>>> >> >> >> avoid
>>>>> >>>>>> >>> >> >>>>> >> >> >> overwriting
>>>>> >>>>>> >>> >> >>>>> >> >> >> wvdial.conf by specifying a different
>>>>> >>>>>> >>> >> >>>>> >> >> >> target
>>>>> >>>>>> >>> >> >>>>> >> >> >> file:
>>>>> >>>>>> >>> >> >>>>> >> >> >> $ sudo wvdialconf wvtest2
>>>>> >>>>>> >>> >> >>>>> >> >> >>
>>>>> >>>>>> >>> >> >>>>> >> >> >> MarvS
>>>>> >>>>>> >>> >> >>>>> >> >> >>
>>>>> >>>>>> >>> >> >>>>> >> >> >>
>>>>> >>>>>> >>> >> >>>>> >> >> >> 2010/1/28 Βασίλης
>>>>> >>>>>> >>> >> >>>>> >> >> >> <piperastaman@xxxxxxxxxxxxxx>:
>>>>> >>>>>> >>> >> >>>>> >> >> >> > basilis@aleo:~$ cd
>>>>> >>>>>> >>> >> >>>>> >> >> >> >
>>>>> >>>>>> >>> >> >>>>> >> >> >> > /home/basilis/Desktop/SLMODEMD_gcc4.4_alsa1.0.21
>>>>> >>>>>> >>> >> >>>>> >> >> >> > basilis@aleo
>>>>> >>>>>> :~/Desktop/SLMODEMD_gcc4.4_alsa1.0.21$
>>>>> >>>>>> >>> >> >>>>> >> >> >> > sudo
>>>>> >>>>>> >>> >> >>>>> >> >> >> > ./setup
>>>>> >>>>>> >>> >> >>>>> >> >> >> > [sudo] password for basilis:
>>>>> >>>>>> >>> >> >>>>> >> >> >> >
>>>>> >>>>>> >>> >> >>>>> >> >> >> > Installing slmodemd helper to
>>>>> >>>>>> >>> >> >>>>> >> >> >> > /usr/sbin/slmodemd
>>>>> >>>>>> >>> >> >>>>> >> >> >> >
>>>>> >>>>>> >>> >> >>>>> >> >> >> > Writing log to slmodemd_Inst.txt
>>>>> >>>>>> >>> >> >>>>> >> >> >> > ./setup: 14: slmodemd: not found
>>>>> >>>>>> >>> >> >>>>> >> >> >> > Copying slmodemd to /usr/sbin/slmodemd,
>>>>> >>>>>> >>> >> >>>>> >> >> >> > making
>>>>> >>>>>> >>> >> >>>>> >> >> >> > exectuable,
>>>>> >>>>>> >>> >> >>>>> >> >> >> > and
>>>>> >>>>>> >>> >> >>>>> >> >> >> > checking
>>>>> >>>>>> >>> >> >>>>> >> >> >> > for
>>>>> >>>>>> >>> >> >>>>> >> >> >> > version 2.9.11
>>>>> >>>>>> >>> >> >>>>> >> >> >> > SmartLink Soft Modem: version 2.9.11 Dec
>>>>> >>>>>> >>> >> >>>>> >> >> >> > 3
>>>>> >>>>>> >>> >> >>>>> >> >> >> > 2009
>>>>> >>>>>> >>> >> >>>>> >> >> >> > 16:59:30
>>>>> >>>>>> >>> >> >>>>> >> >> >> > Version verified: 2.9.11
>>>>> >>>>>> >>> >> >>>>> >> >> >> > Read the slmodemd_Inst.txt
>>>>> >>>>>> >>> >> >>>>> >> >> >> >
>>>>> >>>>>> >>> >> >>>>> >> >> >> > There is already installed a slmodemd of
>>>>> >>>>>> >>> >> >>>>> >> >> >> > version:
>>>>> >>>>>> >>> >> >>>>> >> >> >> > 2.9.11
>>>>> >>>>>> >>> >> >>>>> >> >> >> > There is a file /usr/sbin/slmodemd
>>>>> >>>>>> >>> >> >>>>> >> >> >> > Moving /usr/sbin/slmodemd to
>>>>> >>>>>> >>> >> >>>>> >> >> >> > /usr/sbin/slmodemd.2.9.11
>>>>> >>>>>> >>> >> >>>>> >> >> >> > Copying slmodemd to /usr/sbin/slmodemd,
>>>>> >>>>>> >>> >> >>>>> >> >> >> > making
>>>>> >>>>>> >>> >> >>>>> >> >> >> > exectuable,
>>>>> >>>>>> >>> >> >>>>> >> >> >> > and
>>>>> >>>>>> >>> >> >>>>> >> >> >> > checking
>>>>> >>>>>> >>> >> >>>>> >> >> >> > for
>>>>> >>>>>> >>> >> >>>>> >> >> >> > version 2.9.11
>>>>> >>>>>> >>> >> >>>>> >> >> >> > SmartLink Soft Modem: version 2.9.11 Dec
>>>>> >>>>>> >>> >> >>>>> >> >> >> > 3
>>>>> >>>>>> >>> >> >>>>> >> >> >> > 2009
>>>>> >>>>>> >>> >> >>>>> >> >> >> > 16:59:30
>>>>> >>>>>> >>> >> >>>>> >> >> >> > Version verified: 2.9.11
>>>>> >>>>>> >>> >> >>>>> >> >> >> > Read the slmodemd_Inst.txt
>>>>> >>>>>> >>> >> >>>>> >> >> >> >
>>>>> >>>>>> >>> >> >>>>> >> >> >> > basilis@aleo
>>>>> >>>>>> :~/Desktop/SLMODEMD_gcc4.4_alsa1.0.21$
>>>>> >>>>>> >>> >> >>>>> >> >> >> > sudo
>>>>> >>>>>> >>> >> >>>>> >> >> >> > slmodemd
>>>>> >>>>>> >>> >> >>>>> >> >> >> > -c
>>>>> >>>>>> >>> >> >>>>> >> >> >> > GREECE
>>>>> >>>>>> >>> >> >>>>> >> >> >> > --alsa modem:1
>>>>> >>>>>> >>> >> >>>>> >> >> >> > error: mixer setup: attach hw:1 error:
>>>>> >>>>>> >>> >> >>>>> >> >> >> > No
>>>>> >>>>>> >>> >> >>>>> >> >> >> > such
>>>>> >>>>>> file
>>>>> >>>>>> >>> >> >>>>> >> >> >> > or
>>>>> >>>>>> >>> >> >>>>> >> >> >> > directory
>>>>> >>>>>> >>> >> >>>>> >> >> >> > ALSA lib conf.c:3952:(snd_config_expand)
>>>>> >>>>>> >>> >> >>>>> >> >> >> > Unknown
>>>>> >>>>>> >>> >> >>>>> >> >> >> > parameters
>>>>> >>>>>> >>> >> >>>>> >> >> >> > 1
>>>>> >>>>>> >>> >> >>>>> >> >> >> > ALSA lib
>>>>> >>>>>> >>> >> >>>>> >> >> >> > pcm.c:2211:(snd_pcm_open_noupdate)
>>>>> >>>>>> Unknown
>>>>> >>>>>> >>> >> >>>>> >> >> >> > PCM
>>>>> >>>>>> >>> >> >>>>> >> >> >> > modem:1
>>>>> >>>>>> >>> >> >>>>> >> >> >> > error: alsa setup: cannot open playback
>>>>> >>>>>> >>> >> >>>>> >> >> >> > device
>>>>> >>>>>> >>> >> >>>>> >> >> >> > 'modem:1':
>>>>> >>>>>> >>> >> >>>>> >> >> >> > Invalid
>>>>> >>>>>> >>> >> >>>>> >> >> >> > argument
>>>>> >>>>>> >>> >> >>>>> >> >> >> > error: cannot setup device `modem:1'
>>>>> >>>>>> >>> >> >>>>> >> >> >> > basilis@aleo
>>>>> >>>>>> :~/Desktop/SLMODEMD_gcc4.4_alsa1.0.21$
>>>>> >>>>>> >>> >> >>>>> >> >> >> > modprobe
>>>>> >>>>>> >>> >> >>>>> >> >> >> > -r
>>>>> >>>>>> >>> >> >>>>> >> >> >> > snd-intel8x0m
>>>>> >>>>>> >>> >> >>>>> >> >> >> > basilis@aleo
>>>>> >>>>>> :~/Desktop/SLMODEMD_gcc4.4_alsa1.0.21$
>>>>> >>>>>> >>> >> >>>>> >> >> >> > modprobe
>>>>> >>>>>> >>> >> >>>>> >> >> >> > snd-intel8x0mFATAL: Error inserting
>>>>> >>>>>> >>> >> >>>>> >> >> >> > snd_intel8x0m
>>>>> >>>>>> >>> >> >>>>> >> >> >> >
>>>>> >>>>>> >>> >> >>>>> >> >> >> >
>>>>> >>>>>> >>> >> >>>>> >> >> >> >
>>>>> >>>>>> >>> >> >>>>> >> >> >> >
>>>>> >>>>>> >>> >> >>>>> >> >> >> >
>>>>> >>>>>> (/lib/modules/2.6.31-17-generic/kernel/sound/pci/snd-intel8x0m.ko):
>>>>> >>>>>> >>> >> >>>>> >> >> >> > Operation not permitted
>>>>> >>>>>> >>> >> >>>>> >> >> >> > basilis@aleo
>>>>> >>>>>> :~/Desktop/SLMODEMD_gcc4.4_alsa1.0.21$
>>>>> >>>>>> >>> >> >>>>> >> >> >> > sudo
>>>>> >>>>>> >>> >> >>>>> >> >> >> > modprobe
>>>>> >>>>>> >>> >> >>>>> >> >> >> > snd-intel8x0m
>>>>> >>>>>> >>> >> >>>>> >> >> >> > basilis@aleo
>>>>> >>>>>> :~/Desktop/SLMODEMD_gcc4.4_alsa1.0.21$
>>>>> >>>>>> >>> >> >>>>> >> >> >> > sudo
>>>>> >>>>>> >>> >> >>>>> >> >> >> > slmodemd
>>>>> >>>>>> >>> >> >>>>> >> >> >> > -c
>>>>> >>>>>> >>> >> >>>>> >> >> >> > GREECE
>>>>> >>>>>> >>> >> >>>>> >> >> >> > --alsa modem:1
>>>>> >>>>>> >>> >> >>>>> >> >> >> > SmartLink Soft Modem: version 2.9.11 Dec
>>>>> >>>>>> >>> >> >>>>> >> >> >> > 3
>>>>> >>>>>> >>> >> >>>>> >> >> >> > 2009
>>>>> >>>>>> >>> >> >>>>> >> >> >> > 16:59:30
>>>>> >>>>>> >>> >> >>>>> >> >> >> > symbolic link `/dev/ttySL0' ->
>>>>> >>>>>> >>> >> >>>>> >> >> >> > `/dev/pts/1'
>>>>> >>>>>> created.
>>>>> >>>>>> >>> >> >>>>> >> >> >> > modem `modem:1' created. TTY is
>>>>> >>>>>> >>> >> >>>>> >> >> >> > `/dev/pts/1'
>>>>> >>>>>> >>> >> >>>>> >> >> >> > Use `/dev/ttySL0' as modem device,
>>>>> >>>>>> >>> >> >>>>> >> >> >> > Ctrl+C
>>>>> >>>>>> >>> >> >>>>> >> >> >> > for
>>>>> >>>>>> >>> >> >>>>> >> >> >> > termination.
>>>>> >>>>>> >>> >> >>>>> >> >> >> > ^Cbasilis@aleo
>>>>> >>>>>> :~/Desktop/SLMODEMD_gcc4.4_alsa1.0.21$
>>>>> >>>>>> >>> >> >>>>> >> >> >> >
>>>>> >>>>>> >>> >> >>>>> >> >> >> > i waited a couple of minutes and then
>>>>> >>>>>> >>> >> >>>>> >> >> >> > pressed
>>>>> >>>>>> Ctrl-C
>>>>> >>>>>> >>> >> >>>>> >> >> >> >
>>>>> >>>>>> >>> >> >>>>> >> >> >> >
>>>>> >>>>>> >>> >> >>>>> >> >> >> >
>>>>> >>>>>> >>> >> >>>>> >> >> >> > i am really trying to read and follow
>>>>> >>>>>> >>> >> >>>>> >> >> >> > all
>>>>> >>>>>> >>> >> >>>>> >> >> >> > those
>>>>> >>>>>> .txt
>>>>> >>>>>> >>> >> >>>>> >> >> >> > in
>>>>> >>>>>> >>> >> >>>>> >> >> >> > the
>>>>> >>>>>> >>> >> >>>>> >> >> >> > /DOCs
>>>>> >>>>>> >>> >> >>>>> >> >> >> > and
>>>>> >>>>>> >>> >> >>>>> >> >> >> > everywhere i am prompted, but i honestly
>>>>> >>>>>> >>> >> >>>>> >> >> >> > cannot
>>>>> >>>>>> >>> >> >>>>> >> >> >> > follow...
>>>>> >>>>>> >>> >> >>>>> >> >> >> >
>>>>> >>>>>> >>> >> >>>>> >> >> >> >
>>>>> >>>>>> >>> >> >>>>> >> >> >> >
>>>>> >>>>>> >>> >> >>>>> >> >> >> > Στις 28 Ιανουαρίου 2010 1:54 π.μ., ο
>>>>> >>>>>> >>> >> >>>>> >> >> >> > χρήστης
>>>>> >>>>>> Marvin
>>>>> >>>>>> >>> >> >>>>> >> >> >> > Stodolsky
>>>>> >>>>>> >>> >> >>>>> >> >> >> > <marvin.stodolsky@xxxxxxxxx> έγραψε:
>>>>> >>>>>> >>> >> >>>>> >> >> >> >>
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> $ /Desktop/SLMODEMD_gcc4.4_alsa1.0.21$
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> sudo
>>>>> >>>>>> ./setup
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> You need the sudo to get admin
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> permission
>>>>> >>>>>> >>> >> >>>>> >> >> >> >>
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> MarvS
>>>>> >>>>>> >>> >> >>>>> >> >> >> >>
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> 2010/1/27 Βασίλης
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> <piperastaman@xxxxxxxxxxxxxx>:
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > it doesn't seem to be working...
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > why don't i have permissions?... can
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > i
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > gain
>>>>> >>>>>> them?
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > basilis@aleo:~/Desktop$ cd
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >
>>>>> >>>>>> /home/basilis/Desktop/SLMODEMD_gcc4.4_alsa1.0.21
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > basilis@aleo
>>>>> >>>>>> :~/Desktop/SLMODEMD_gcc4.4_alsa1.0.21$
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > ./setup
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > Installing slmodemd helper to
>>>>> >>>>>> /usr/sbin/slmodemd
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > Writing log to slmodemd_Inst.txt
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > ./setup: 14: slmodemd: not found
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > Copying slmodemd to
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > /usr/sbin/slmodemd,
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > making
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > exectuable,
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > and
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > checking
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > for
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > version 2.9.11
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > cp: cannot create regular file
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > `/usr/sbin/slmodemd':
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > Permission
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > denied
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > chmod: cannot access
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > `/usr/sbin/slmodemd':
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > No
>>>>> >>>>>> such
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > file
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > or
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > directory
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > ./setup: 28: slmodemd: not found
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > ./setup: 29: slmodemd: not found
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > Read the slmodemd_Inst.txt
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > ./setup: 14: slmodemd: not found
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > Copying slmodemd to
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > /usr/sbin/slmodemd,
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > making
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > exectuable,
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > and
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > checking
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > for
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > version 2.9.11
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > cp: cannot create regular file
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > `/usr/sbin/slmodemd':
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > Permission
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > denied
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > chmod: cannot access
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > `/usr/sbin/slmodemd':
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > No
>>>>> >>>>>> such
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > file
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > or
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > directory
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > ./setup: 28: slmodemd: not found
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > ./setup: 29: slmodemd: not found
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > Read the slmodemd_Inst.txt
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > basilis@aleo
>>>>> >>>>>> :~/Desktop/SLMODEMD_gcc4.4_alsa1.0.21$
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > modprobe
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > -r
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > snd-intel8x0m
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > basilis@aleo
>>>>> >>>>>> :~/Desktop/SLMODEMD_gcc4.4_alsa1.0.21$
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > modprobe
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > snd-intel8x0m
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > FATAL: Error inserting snd_intel8x0m
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >
>>>>> >>>>>> (/lib/modules/2.6.31-17-generic/kernel/sound/pci/snd-intel8x0m.ko):
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > Operation not permitted
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > basilis@aleo
>>>>> >>>>>> :~/Desktop/SLMODEMD_gcc4.4_alsa1.0.21$
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > sudo
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > slmodemd
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > -c
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > GREECE
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > --alsa modem:1
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > sudo: slmodemd: command not found
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > basilis@aleo
>>>>> >>>>>> :~/Desktop/SLMODEMD_gcc4.4_alsa1.0.21$
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > can it be related with the fact that
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > my
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > alsa
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > version
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > is
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > 1.0.20?
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > Στις 27 Ιανουαρίου 2010 3:35 μ.μ., ο
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > χρήστης
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > Marvin
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > Stodolsky
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> > <marvin.stodolsky@xxxxxxxxx> έγραψε:
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >>
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> Use SLMODEMD.4.4-alsa1.0.21.tar.g
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >>
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> 2010/1/27 Marvin Stodolsky
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> <marvin.stodolsky@xxxxxxxxx>:
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> > The target package must be in the
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> > same
>>>>> >>>>>> folder
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> > that
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> > you
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> > issue
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> > the
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> > command. Check with:
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> > $ ls dkms*
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> > If it is displayed, then
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> > $ sudo dpkg -i dkms*.deb
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> > Alternatively you can specify the
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> > PATH to
>>>>> >>>>>> the
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> > package,
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> > for
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> > examples:
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> > $ sudo dpkg -i Desktop/dkms*.deb
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> > or
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> > $ sudo dpkg -i
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> > /media/USBdriveName/dkms*.deb
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> > MarvS
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> > 2010/1/27 Βασίλης
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> > <piperastaman@xxxxxxxxxxxxxx>:
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >> two problems:
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >> 1) basilis@aleo:~$ cd
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >> /home/basilis/Desktop/dkms-2.1.1.1
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >> basilis@aleo:~/Desktop/dkms-2.1.1.1$
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >> sudo
>>>>> >>>>>> dpkg
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >> -i
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >> dkms*.deb
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >> [sudo] password for basilis:
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >> dpkg: error processing dkms*.deb
>>>>> >>>>>> (--install):
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >> cannot access archive: No such
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >> file
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >> or
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >> directory
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >> Errors were encountered while
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >> processing:
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >> dkms*.deb
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >> basilis@aleo:~/Desktop/dkms-2.1.1.1$
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >> cd/
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >> bash: cd/: No such file or
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >> directory
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >> basilis@aleo:~/Desktop/dkms-2.1.1.1$
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >> cd
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >> basilis@aleo:~$ sudo dpkg -i
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >> dkms*.deb
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >> dpkg: error processing dkms*.deb
>>>>> >>>>>> (--install):
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >> cannot access archive: No such
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >> file
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >> or
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >> directory
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >> Errors were encountered while
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >> processing:
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >> dkms*.deb
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >> basilis@aleo:~$
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >> 2) check foto: which one of the
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >> highlighted
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >> should
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >> i
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >> download?
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >> Στις 27 Ιανουαρίου 2010 6:06
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >> π.μ.,
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >> ο
>>>>> >>>>>> χρήστης
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >> Marvin
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >> Stodolsky
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >> <marvin.stodolsky@xxxxxxxxx>
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >> έγραψε:
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>>
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> Βασίλης,
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>>
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> DKMS isn't cogent to this modem,
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> but
>>>>> >>>>>> install
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> it
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> anyway,
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> should
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> it
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> be
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> needed in the future:
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> $ sudo dpkg -i dkms*.deb
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>>
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> Under CPU=i686, Linux version
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> 2.6.31-17-generic
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> (
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>>
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> for:
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> Modem: Intel Corporation
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> 82801DB/DBL/DBM
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> "
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> CLASS=0703
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> PCIDEV=8086:24c6
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> SUBSYS=1734:102a
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> IRQ=17
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> SOFT=8086:24c6.MC97
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> CodecArchived=SIL22
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> CodecDiagnosed=SIL22
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> CodecClass=SIL
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> IDENT=slmodemd
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> SLMODEMD_DEVICE=modem:1
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> Driver=snd-intel8x0m
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>>
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> Download from
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>>
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>>
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>>
>>>>> >>>>>> http://linmodems.technion.ac.il/packages/smartlink/
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> the package
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> SLMODEMD.gcc4.4.tar.gz
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> having
>>>>> >>>>>> a
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> compiled
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> slmodemd.
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> Unpack
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> under Linux with:
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> $ tar zxf
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> SLMODEMD.gcc4.4.tar.gz
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> and read instructions therein.
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> But
>>>>> >>>>>> briefly,
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> the
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> modem
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> is
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> setup
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> with
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> command:
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> sudo slmodemd -c GREECE
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> --alsa
>>>>> >>>>>> modem:1
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> reporting dynamic creation of
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> ports:
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> /dev/ttySL0 -->
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> /dev/pts/N
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> ,
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> with
>>>>> >>>>>> N
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> some
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> number
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> Read DOCs/Smartlink.txt and
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> Modem/DOCs/YourSystem.txt
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> for
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> follow
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> through guidance.
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>>
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> Occassionally you may have to
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> unload &
>>>>> >>>>>> reload
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> the
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> driver:
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> $ modprobe -r snd-intel8x0m
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> $ modprobe snd-intel8x0m
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>>
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> MarvS
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>>
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> 2010/1/26 Βασίλης
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> <piperastaman@xxxxxxxxxxxxxx>:
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > i guess it has something to do
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > with
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > the
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > plain
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > text
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > thing
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > you
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > were
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > telling me
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > about... [that's why it came
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > back
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > to
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > me]
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > sorry i don't know what to
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > change, so
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > i
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > send
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > it
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > to
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > you...
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> >
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > ---------- Προωθημένο μήνυμα
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > ----------
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > Από: Βασίλης <
>>>>> >>>>>> piperastaman@xxxxxxxxxxxxxx>
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > Ημερομηνία: 27 Ιανουαρίου 2010
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > 12:35
>>>>> >>>>>> π.μ.
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > Θέμα: Basilis, Greece (Lesbos
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > island),
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > kernel
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > 2.6.31-17-generic
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > (upgraded
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > three hours ago)
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > Προς: discuss
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > <discuss@xxxxxxxxxxxxx>
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> >
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> >
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > Hallo again!
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > I am on the island now; with a
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > Fujitsu
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > Siemens
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > AmiloD
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > bought
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > in
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > 2003
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > and
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > again with no ADSL...
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > I also downloaded the
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > dkms-2.1.1.1
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > (as
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > advised
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > in
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > the
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > ModemData.txt),
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > but i
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > don't know what to do with
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > it..
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > How do i install(?) it?
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > Anxiously awaiting help for
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > successfull
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > dial-up
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > even
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > with
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > the
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > current
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > (new)
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > conditions [[i would very much
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > like
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > to
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > avoid
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > the
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > sound
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > problems
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > though... -
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > here i only have ubuntu9.10;
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > no
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > previous
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > kernels
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > {i
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > assume}
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > and
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > no
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > dual-boot
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > whatsoever...
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > Greetings
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > Βασίλης
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> >
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> >
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > basilis@aleo:~$ cd Desktop
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > basilis@aleo:~/Desktop$ sudo
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > gunzip
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > scanModem.gz
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > basilis@aleo:~/Desktop$ chmod
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > +x
>>>>> >>>>>> scanModem
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > basilis@aleo:~/Desktop$
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > ./scanModem
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > UPDATE=2010_01_22
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > Continuing as this update is
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > only 1
>>>>> >>>>>> weeks
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > old,
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > but the current Update is
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > always
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > at:
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > http://linmodems.technion.ac.il
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> >
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> >
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > Identifying PCI bus slots with
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > candidate
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > modems.
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > Running PCIbus cases
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > Analysing card in PCI bus
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > 00:1f.6,
>>>>> >>>>>> writing
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > to
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > scanout.00:1f.6
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> >
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > Please load the candidate
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > driver
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > snd-intel8x0m,
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > with
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > Admin/root
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > command:
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > sudo modprobe
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > snd-intel8x0m
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > Then rerun
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > ./scanModem
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> >
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > basilis@aleo:~/Desktop$ sudo
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > modprobe
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > snd-intel8x0m
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > basilis@aleo:~/Desktop$
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > ./scanModem
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > UPDATE=2010_01_22
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > Continuing as this update is
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > only 1
>>>>> >>>>>> weeks
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > old,
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > but the current Update is
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > always
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > at:
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > http://linmodems.technion.ac.il
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> >
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > num=22
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> >
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > Identifying PCI bus slots with
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > candidate
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > modems.
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > Running PCIbus cases
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > Analysing card in PCI bus
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > 00:1f.6,
>>>>> >>>>>> writing
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > to
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > scanout.00:1f.6
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > Using scanout.00:1f.6 data,
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > and
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > writing
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > guidance
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > to
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > ModemData.txt
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > Writing DOCs/Intel.txt
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > Writing DOCs/Smartlink.txt
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> >
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > Writing residual guidance
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > customized
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > to
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > your
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > System.
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > A subfolder Modem/ has
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > been
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > written,
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > containing
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > these
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > files
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > with
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > more
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > detailed Information:
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> >
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> >
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> >
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> >
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> >
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> >
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> >
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> >
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> >
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> >
>>>>> >>>>>>
>>>>> >>>>>>
>>>>> >>>>>> ------------------------------------------------------------------------------------------
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > 1stRead.txt Bootup.txt
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > dmesg.txt
>>>>> >>>>>> DOCs
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > ModemData.txt
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > scanout.00:1f.6
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > tmp
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > and in the DOCs subfolder:
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > DriverCompiling.txt
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > InfoGeneral.txt
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > Intel.txt
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > Rational.txt
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > Smartlink.txt
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > SoftModem.txt
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > Testing.txt
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > UNSUBSCRIBE.txt
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > wvdial.txt
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > YourSystem.txt
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> >
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> >
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> >
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> >
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> >
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> >
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> >
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> >
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> >
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> >
>>>>> >>>>>>
>>>>> >>>>>> -------------------------------------------------------------------------------------------
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > Please read 1stRead.txt
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > first
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > for
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > Guidance.
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> >
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> >
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> > basilis@aleo:~/Desktop$
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> >
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>> >
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >>
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >> >
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >
>>>>> >>>>>> >>> >> >>>>> >> >> >> >> >
>>>>> >>>>>> >>> >> >>>>> >> >> >> >
>>>>> >>>>>> >>> >> >>>>> >> >> >> >
>>>>> >>>>>> >>> >> >>>>> >> >> >
>>>>> >>>>>> >>> >> >>>>> >> >> >
>>>>> >>>>>> >>> >> >>>>> >> >
>>>>> >>>>>> >>> >> >>>>> >> >
>>>>> >>>>>> >>> >> >>>>> >
>>>>> >>>>>> >>> >> >>>>> >
>>>>> >>>>>> >>> >> >>>>
>>>>> >>>>>> >>> >> >>>>
>>>>> >>>>>> >>> >> >>>
>>>>> >>>>>> >>> >> >>
>>>>> >>>>>> >>> >> >
>>>>> >>>>>> >>> >
>>>>> >>>>>> >>> >
>>>>> >>>>>> >>
>>>>> >>>>>> >>
>>>>> >>>>>> >
>>>>> >>>>>>
>>>>> >>>>>
>>>>> >>>>>
>>>>> >>>>
>>>>> >>>
>>>>> >>
>>>>> >
>>>>
>>>>
>>>
>>
>
