Linmodems and Team:
NOTE: Commands entered and system-generated output start at "RESULTS" header
(all caps).
J
----------------------------
# current problem: modem hardware detection (even when the drivers are loaded.)
# modem activation command used:
sudo slmodemd -c GREECE --alsa hw:0,6 (per instructions...and Not the modem:1)
# yes/no question: should I try pppconfig? (I didn't)
2 wvdial files in /etc. wvdial.conf~ (blank). wvdial.201001290801.
(pesonal info edited out.) see below:
tra@geb:/etc$ cat wvdial.201001290801
INFO
[Dialer Defaults]
Phone =* (edited out, of course visible on my system)
Username =*
Password =*
New PPPD = yes
tra@geb:/etc$
----------------------------
RESULTS
tra@geb:~$ ls SL*
SLMODEMD_gcc4.4_alsa1.0.21.tar.gz
SLMODEMD_gcc4.4_alsa1.0.21:
1st_Read.txt CountryList.txt setup slmodemd_Inst.txt Testing.txt
Changes Files.txt Slmodem-ALSA.txt slmodemd.txt Unload.txt
COPYING README slmodemd slmodem.txt wvdial.conf
tra@geb:~$ cd SLMODEMD_gcc4.4_alsa1.0.21
tra@geb:~/SLMODEMD_gcc4.4_alsa1.0.21$ ls
1st_Read.txt CountryList.txt setup slmodemd_Inst.txt Testing.txt
Changes Files.txt Slmodem-ALSA.txt slmodemd.txt Unload.txt
COPYING README slmodemd slmodem.txt wvdial.conf
tra@geb:~/SLMODEMD_gcc4.4_alsa1.0.21$ sudo ./setup
[sudo] password for tra:
Installing slmodemd helper to /usr/sbin/slmodemd
Writing log to slmodemd_Inst.txt
./setup: 14: slmodemd: not found
Copying slmodemd to /usr/sbin/slmodemd, making exectuable, and checking for version 2.9.11
SmartLink Soft Modem: version 2.9.11 Dec 3 2009 16:59:30
Version verified: 2.9.11
Read the slmodemd_Inst.txt
There is already installed a slmodemd of version: 2.9.11
There is a file /usr/sbin/slmodemd
Moving /usr/sbin/slmodemd to /usr/sbin/slmodemd.2.9.11
Copying slmodemd to /usr/sbin/slmodemd, making exectuable, and checking for version 2.9.11
SmartLink Soft Modem: version 2.9.11 Dec 3 2009 16:59:30
Version verified: 2.9.11
Read the slmodemd_Inst.txt
tra@geb:~/SLMODEMD_gcc4.4_alsa1.0.21$ sudo slmodemd -c GREECE --alsa hw:0,6
SmartLink Soft Modem: version 2.9.11 Dec 3 2009 16:59:30
symbolic link `/dev/ttySL0' -> `/dev/pts/2' created.
modem `hw:0,6' created. TTY is `/dev/pts/2'
Use `/dev/ttySL0' as modem device, Ctrl+C for termination.
^Ctra@geb:~/SLMODEMD_gcc4.4_alsa1.0.21$ ls -l /dev/ttySL0
ls: cannot access /dev/ttySL0: No such file or directory
tra@geb:~/SLMODEMD_gcc4.4_alsa1.0.21$ sudo ls -l /dev/ttySL0
ls: cannot access /dev/ttySL0: No such file or directory
tra@geb:~/SLMODEMD_gcc4.4_alsa1.0.21$
~ ~ ~
