After installing wvdial-karmic the readme.txt said that the modem specific driver
must be loaded and the modem activated, however it did not give any instructions for
doing that. This was confirmed when I tried to run wvdialconf; I received an error
message saying that the modem was not detected.
As ModemData.txt said might happen, it appears the modem was disabled during bootup but
not enabled later. Can you tell me how to fix this?
I would appreciate any help you can give.
Ken Bartel
____________________________________________________________
Weight Loss Program
Best Weight Loss Program - Click Here!
http://thirdpartyoffers.juno.com/TGL2141/c?cp=L-Fw1jPlVW8RmvZk41VqvQAAJ1Cip5dCKj_siTFSrvnN8WIcAAYAAAAAAAAAAAAAAAAAAADNAAAAAAAAAAAAAAAAAAAEUgAAAAA=
Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 2.6.31-14-generic
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=i686,
Linux version 2.6.31-14-generic (buildd@rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009
scanModem update of: 2010_01_09
The dialer utility package WVDIAL does not appear to be installed on your System.
For Ubuntu users, there are at the bottom of http://linmodems.technion.ac.il/packages/
packages with the files necessary to install wvdial, with names like:
wvdial_jaunty_amd64.zip for x86_64, 64 bit bus systems.
wvdial_jaunty_i386.zip for 32 bit systems.
wvdial_karmic_i386.zip for 32 bit systems.
These are about 1 MB in size. After downloaded and copied into your Linux partition:
$ unzip wv*.zip
Within the new folder:
$ sudo dpkg -i *.deb
will complete the wvdial installation
Please read Modem/DOCs/wvdial.txt for usage information.
Presently install your Linux Distributions dkms package. It provides for automated driver updates,
following upgrade of your kernel. For details see http://linux.dell.com/projects.shtml#dkms
There are no blacklisted modem drivers in /etc/modprobe* files
Potentially useful modem drivers now loaded are:
snd_hda_intel
Attached USB devices are:
ID 0461:4d22 Primax Electronics, Ltd
ID 413c:2107 Dell Computer Corp.
If a cellphone is not detected, see http://ubuntuforums.org/archive/index.php/t-878554.html
A sample report is: http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html
If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@xxxxxxxxxxxxx
For candidate card in slot 03:02.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
03:02.0 14f1:2f20 14f1:200f Communication controller: Conexant Systems, Inc. HSF 56k Data/Fax Modem
Modem interrupt assignment and sharing:
--- Bootup diagnostics for card in PCI slot 03:02.0 ----
[ 0.098681] pci 0000:03:02.0: reg 10 32bit mmio: [0xfebf0000-0xfebfffff]
[ 0.098688] pci 0000:03:02.0: reg 14 io port: [0xec00-0xec07]
[ 0.098727] pci 0000:03:02.0: PME# supported from D3hot D3cold
[ 0.098731] pci 0000:03:02.0: PME# disabled
The PCI slot 03:02.0 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
For candidate card in slot 00:1b.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:1b.0 8086:27d8 1028:02e1 Audio device: Intel Corporation 82801G
Modem interrupt assignment and sharing:
16: 844 IO-APIC-fasteoi uhci_hcd:usb5, HDA Intel
--- Bootup diagnostics for card in PCI slot 00:1b.0 ----
[ 0.097676] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe9f8000-0xfe9fbfff]
[ 0.097717] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.097720] pci 0000:00:1b.0: PME# disabled
[ 5.621425] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.621451] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 5.719758] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
The PCI slot 00:1b.0 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.
The ALSA verion is 1.0.20
The modem cards detected by "aplay -l" are: None
The /proc/asound/pcm file reports:
-----------------------
00-00: ALC662 rev1 Analog : ALC662 rev1 Analog : playback 1 : capture 1
about /proc/asound/cards:
------------------------
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xfe9f8000 irq 16
PCI slot 00:1b.0 has a High Definition Audio Card
The drivers are in the kernel modules tree at:
/lib/modules/2.6.31-14-generic/kernel/sound/pci/hda/snd-hda-intel.ko
UNEXPECTED HDA diagnostic outcome.
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===
Predictive diagnostics for card in bus 03:02.0:
Modem chipset detected on
NAME="Communication controller: Conexant Systems, Inc. HSF 56k Data/Fax Modem"
CLASS=0780
PCIDEV=14f1:2f20
SUBSYS=14f1:200f
IRQ=5
IDENT=hsfmodem
Driver=hsfmodem-drivers
For candidate modem in: 03:02.0
0780 Communication controller: Conexant Systems, Inc. HSF 56k Data/Fax Modem
Primary device ID: 14f1:2f20
Support type needed or chipset: hsfmodem
Writing DOCs/Intel.txt
For owners of a Dell PCs with Conexant HSF modems, a driver source package with full speed enabled is available, but requires driver compiling. Read DOCs/Conexant.txt
From http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php
download hsfmodem-7.80.02.05full_k2.6.31_14_generic_ubuntu_i386.deb.zip
Under Linux unpack with:
$ unzip hsfmodem*.zip
Then install with:
$ sudo dpkg -i hsfmodem*.deb
Subsequently, the modem should be found with
$ sudo wvdialconf /etc/wvdial.conf
Edit in your personal information with:
$ sudo gedit /etc/wvdial.conf
and try dialing out with:
$ sudo wvdial.
See DOCs/Testing.txt for details.
The directions following below need only be pursued, if the above procedures are not adequate.
Start at http://www.linuxant.com/drivers/hsf/downloads-license.php to find the
hsfmodem package matching your System. For several Linux distros, there are
precompiled drivers matched to specific kernels. These have within the FileName,
your KernelVersion: 2.6.31_14_generic
They can be found through http://www.linuxant.com/drivers/hsf/full/downloads.php
A more precise location may be given a few paragraphs below.
If an EXACT Match with your your KernelVersion is not found, one of the
"Generic packages with source" near the bottom of the page must be used.
Downloaded packages must be moved into the Linux partition (home folder is OK)
and unzipped with:
unzip hsf*.zip
The installation command for a .deb suffic packages is, with root/adm permission:
sudo dpkg -i hsf*.deb
while for .rpm suffix it is, with:
rpm -i hsf*.rpm
Read DOCs/Conexant.txt
Writing DOCs/Conexant.txt
Predictive diagnostics for card in bus 00:1b.0:
Modem chipset not detected on
NAME="Audio device: Intel Corporation 82801G "
CLASS=0403
PCIDEV=8086:27d8
SUBSYS=1028:02e1
IRQ=16
HDA=8086:27d8
SOFT=8086:27d8.HDA
High Definition Audio (HDA) cards MAY host a modem chip in their Subsystem,
and many are supported by the ALSA audio+modem driver snd-hda-intel
A modem was not detected on HDA card 8086:27d8.
If another modem card is present, then most likely 8086:27d8 does not host a modem.
If another modem card has not been detected, then possibilities are:
1) A Conexant modem chip is present on 8086:27d8, as Conexant chips
are frequently not detectable by ALSA diagnostics
2) The modem may be of the older non-PCI Controller Chipset (hardware) type.
Try detection with Root permission:
sudo wvdialconf /etc/wvdial.conf
For candidate modem in: 00:1b.0
0403 Audio device: Intel Corporation 82801G
Primary device ID: 8086:27d8
Subsystem PCI_id 1028:02e1
Softmodem codec or chipset from diagnostics:
from Archives:
Support type needed or chipset:
Support can likely be achieved through two mutually exclusive alternatives:
1) The hsfmodem software for Conexant chipset modems: Read DOCs/Conexant.txt
The following ALSA alternative CANNOT work with Conexant modems.
2) An ALSA modem driver plus slmodemd. Read DOCs/Smartlink.txt for details, and
to test get the package SLMODEMD.gcc4.4.tar.gz from:
http://linmodems.technion.ac.il/packages/smartlink/
Writing DOCs/Smartlink.txt
============ end Smartlink section =====================
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.4.1
and the compiler used in kernel assembly: 4.4.1
The patch utility is needed for compiling ALSA drivers, and possibly others.
Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.4
linuc_headers base folder /lib/modules/2.6.31-14-generic/build
However some compilations and executable functions may need additional files,
in the FileNames.h (so called kernel "h"eaders) collection installed in /usr/include/ .
For martian_modem, additional required packages are needed. The also required headers of package libc6 are commonly installed by default.
Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
In not included on your install CD, search for them at http://packages.ubuntu.com
or comparable Repository for other Linux distros.
When compiling ALSA drivers, the utility "patch" will also be needed.
If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking pppd properties:
-rwsr-xr-- 1 root dip 277352 2009-02-20 12:25 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
sudo chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
For guidance on FAX usage, get from http://linmodems.technion.ac.il/packages/ get faxing.tar.gz
It has samples for a modem using port /dev/ttySL0, which must be changed to match your modem's port.
Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.
Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
/etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
CPU0
0: 47 IO-APIC-edge timer
1: 4 IO-APIC-edge i8042
6: 2 IO-APIC-edge floppy
8: 1 IO-APIC-edge rtc0
9: 0 IO-APIC-fasteoi acpi
12: 6 IO-APIC-edge i8042
16: 844 IO-APIC-fasteoi uhci_hcd:usb5, HDA Intel
18: 0 IO-APIC-fasteoi uhci_hcd:usb4
19: 24080 IO-APIC-fasteoi ata_piix, uhci_hcd:usb3
23: 263 IO-APIC-fasteoi ehci_hcd:usb1, uhci_hcd:usb2
26: 1311 PCI-MSI-edge i915
27: 0 PCI-MSI-edge eth0
NMI: 0 Non-maskable interrupts
LOC: 17482 Local timer interrupts
SPU: 0 Spurious interrupts
CNT: 0 Performance counter interrupts
PND: 0 Performance pending work
RES: 0 Rescheduling interrupts
CAL: 0 Function call interrupts
TLB: 0 TLB shootdowns
TRM: 0 Thermal event interrupts
THR: 0 Threshold APIC interrupts
MCE: 0 Machine check exceptions
MCP: 2 Machine check polls
ERR: 0
MIS: 0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.31-14-generic (buildd@rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009 (Ubuntu 2.6.31-14.48-generic)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007dd70000 (usable)
[ 0.000000] BIOS-e820: 000000007dd70000 - 000000007dd7e000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007dd7e000 - 000000007ddc8000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007ddc8000 - 000000007ddfe000 (reserved)
[ 0.000000] BIOS-e820: 000000007de00000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] last_pfn = 0x7dd70 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07DE00000 mask FFFE00000 uncachable
[ 0.000000] 2 base 07E000000 mask FFE000000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009fc00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000007dd70000 (usable)
[ 0.000000] modified: 000000007dd70000 - 000000007dd7e000 (ACPI data)
[ 0.000000] modified: 000000007dd7e000 - 000000007ddc8000 (ACPI NVS)
[ 0.000000] modified: 000000007ddc8000 - 000000007ddfe000 (reserved)
[ 0.000000] modified: 000000007de00000 - 0000000080000000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
[ 0.000000] RAMDISK: 378a5000 - 37fefb65
[ 0.000000] Allocated new RAMDISK: 008ad000 - 00ff7b65
[ 0.000000] Move RAMDISK from 00000000378a5000 - 0000000037fefb64 to 008ad000 - 00ff7b64
[ 0.000000] ACPI: RSDP 000f9980 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 7dd70000 00040 (v01 DELL ECS 20090723 MSFT 00000097)
[ 0.000000] ACPI: FACP 7dd70200 00084 (v01 072309 FACP1648 20090723 MSFT 00000097)
[ 0.000000] ACPI: DSDT 7dd70640 05DD6 (v01 1AAAA 1AAAA000 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 7dd7e000 00040
[ 0.000000] ACPI: APIC 7dd70390 0006C (v01 072309 APIC1648 20090723 MSFT 00000097)
[ 0.000000] ACPI: MCFG 7dd70400 0003C (v01 072309 OEMMCFG 20090723 MSFT 00000097)
[ 0.000000] ACPI: SLIC 7dd70440 00176 (v01 DELL ECS 20090723 MSFT 00000097)
[ 0.000000] ACPI: OEMB 7dd7e040 00071 (v01 072309 OEMB1648 20090723 MSFT 00000097)
[ 0.000000] ACPI: HPET 7dd76420 00038 (v01 072309 OEMHPET 20090723 MSFT 00000097)
[ 0.000000] ACPI: GSCI 7dd7e0c0 02024 (v01 072309 GMCHSCI 20090723 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1125MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00008000 - 0000ef00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008a80a0] TEXT DATA BSS ==> [0000100000 - 00008a80a0]
[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #5 [00008a9000 - 00008ac11c] BRK ==> [00008a9000 - 00008ac11c]
[ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
[ 0.000000] #7 [00008ad000 - 0000ff7b65] NEW RAMDISK ==> [00008ad000 - 0000ff7b65]
[ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007dd70
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000002
[ 0.000000] 0: 0x00000006 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007dd70
[ 0.000000] On node 0 totalpages: 515339
[ 0.000000] free_area_init_node: node 0, pgdat c0784900, node_mem_map c1000000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3963 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2251 pages used for memmap
[ 0.000000] HighMem zone: 285863 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 3 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ee00000)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages at c1fca000, static data 35612 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 511312
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-14-generic root=UUID=07564d35-00eb-4aad-a7c0-c646175b7562 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 10308800 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007dd70)
[ 0.000000] Memory: 2017860k/2061760k available (4565k kernel code, 42608k reserved, 2143k data, 540k init, 1152456k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc078e000 - 0xc0815000 ( 540 kB)
[ 0.000000] .data : 0xc0575554 - 0xc078d308 (2143 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0575554 (4565 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] NR_IRQS:2304 nr_irqs:440
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2194.029 MHz processor.
[ 0.001370] Console: colour VGA+ 80x25
[ 0.001373] console [tty0] enabled
[ 0.001516] hpet clockevent registered
[ 0.001519] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.001525] Calibrating delay loop (skipped), value calculated using timer frequency.. 4388.05 BogoMIPS (lpj=8776116)
[ 0.001541] Security Framework initialized
[ 0.001558] AppArmor: AppArmor initialized
[ 0.001565] Mount-cache hash table entries: 512
[ 0.001683] Initializing cgroup subsys ns
[ 0.001687] Initializing cgroup subsys cpuacct
[ 0.001691] Initializing cgroup subsys memory
[ 0.001698] Initializing cgroup subsys freezer
[ 0.001700] Initializing cgroup subsys net_cls
[ 0.001712] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.001715] CPU: L2 cache: 512K
[ 0.001719] mce: CPU supports 6 MCE banks
[ 0.001726] CPU0: Thermal monitoring enabled (TM2)
[ 0.001729] using mwait in idle threads.
[ 0.001734] Performance Counters: Core2 events, Intel PMU driver.
[ 0.001742] ... version: 2
[ 0.001743] ... bit width: 40
[ 0.001745] ... generic counters: 2
[ 0.001746] ... value mask: 000000ffffffffff
[ 0.001748] ... max period: 000000007fffffff
[ 0.001750] ... fixed-purpose counters: 3
[ 0.001752] ... counter mask: 0000000700000003
[ 0.001756] Checking 'hlt' instruction... OK.
[ 0.016871] SMP alternatives: switching to UP code
[ 0.023448] ACPI: Core revision 20090521
[ 0.032364] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.074991] CPU0: Intel(R) Celeron(R) CPU 450 @ 2.20GHz stepping 01
[ 0.076001] Brought up 1 CPUs
[ 0.076001] Total of 1 processors activated (4388.05 BogoMIPS).
[ 0.076001] CPU0 attaching NULL sched-domain.
[ 0.076001] Booting paravirtualized kernel on bare hardware
[ 0.076001] regulator: core version 0.5
[ 0.076001] Time: 9:51:46 Date: 01/12/10
[ 0.076001] NET: Registered protocol family 16
[ 0.076001] EISA bus registered
[ 0.076001] ACPI: bus type pci registered
[ 0.076001] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.076001] PCI: Not using MMCONFIG.
[ 0.076001] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3
[ 0.076001] PCI: Using configuration type 1 for base access
[ 0.076001] bio: create slab <bio-0> at 0
[ 0.076001] ACPI: EC: Look up EC in DSDT
[ 0.082754] ACPI: Interpreter enabled
[ 0.082760] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.082782] ACPI: Using IOAPIC for interrupt routing
[ 0.082832] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.088240] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.088243] PCI: Using MMCONFIG for extended config space
[ 0.096506] ACPI Warning: Incorrect checksum in table [OEMB] - 0D, should be 05 20090521 tbutils-246
[ 0.097346] ACPI: No dock devices found.
[ 0.097503] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.097592] pci 0000:00:02.0: reg 10 64bit mmio: [0xfe400000-0xfe7fffff]
[ 0.097599] pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff]
[ 0.097604] pci 0000:00:02.0: reg 20 io port: [0xcc00-0xcc07]
[ 0.097676] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe9f8000-0xfe9fbfff]
[ 0.097717] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.097720] pci 0000:00:1b.0: PME# disabled
[ 0.097776] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.097779] pci 0000:00:1c.0: PME# disabled
[ 0.097836] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.097840] pci 0000:00:1c.1: PME# disabled
[ 0.097886] pci 0000:00:1d.0: reg 20 io port: [0xc880-0xc89f]
[ 0.097932] pci 0000:00:1d.1: reg 20 io port: [0xc800-0xc81f]
[ 0.097978] pci 0000:00:1d.2: reg 20 io port: [0xc480-0xc49f]
[ 0.098024] pci 0000:00:1d.3: reg 20 io port: [0xc400-0xc41f]
[ 0.098074] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfe9f7c00-0xfe9f7fff]
[ 0.098123] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.098127] pci 0000:00:1d.7: PME# disabled
[ 0.098240] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 0.098244] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[ 0.098247] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)
[ 0.098252] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 02e0 (mask 00ff)
[ 0.098297] pci 0000:00:1f.2: reg 10 io port: [0xc080-0xc087]
[ 0.098302] pci 0000:00:1f.2: reg 14 io port: [0xc000-0xc003]
[ 0.098308] pci 0000:00:1f.2: reg 18 io port: [0xbc00-0xbc07]
[ 0.098313] pci 0000:00:1f.2: reg 1c io port: [0xb880-0xb883]
[ 0.098319] pci 0000:00:1f.2: reg 20 io port: [0xb800-0xb80f]
[ 0.098341] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.098345] pci 0000:00:1f.2: PME# disabled
[ 0.098389] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[ 0.098497] pci 0000:02:00.0: reg 10 io port: [0xd800-0xd8ff]
[ 0.098516] pci 0000:02:00.0: reg 18 64bit mmio: [0xfdfff000-0xfdffffff]
[ 0.098530] pci 0000:02:00.0: reg 20 64bit mmio: [0xfdfe0000-0xfdfeffff]
[ 0.098538] pci 0000:02:00.0: reg 30 32bit mmio: [0xfeae0000-0xfeafffff]
[ 0.098577] pci 0000:02:00.0: supports D1 D2
[ 0.098579] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.098584] pci 0000:02:00.0: PME# disabled
[ 0.098638] pci 0000:00:1c.1: bridge io port: [0xd000-0xdfff]
[ 0.098642] pci 0000:00:1c.1: bridge 32bit mmio: [0xfea00000-0xfeafffff]
[ 0.098647] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xfdf00000-0xfdffffff]
[ 0.098681] pci 0000:03:02.0: reg 10 32bit mmio: [0xfebf0000-0xfebfffff]
[ 0.098688] pci 0000:03:02.0: reg 14 io port: [0xec00-0xec07]
[ 0.098727] pci 0000:03:02.0: PME# supported from D3hot D3cold
[ 0.098731] pci 0000:03:02.0: PME# disabled
[ 0.098772] pci 0000:00:1e.0: transparent bridge
[ 0.098776] pci 0000:00:1e.0: bridge io port: [0xe000-0xefff]
[ 0.098779] pci 0000:00:1e.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
[ 0.098797] pci_bus 0000:00: on NUMA node 0
[ 0.098804] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.098943] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.099036] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.099091] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[ 0.106408] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.106521] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.106628] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.106736] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.106842] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.106948] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.107056] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.107162] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.107338] SCSI subsystem initialized
[ 0.107393] libata version 3.00 loaded.
[ 0.107471] usbcore: registered new interface driver usbfs
[ 0.107485] usbcore: registered new interface driver hub
[ 0.107511] usbcore: registered new device driver usb
[ 0.107633] ACPI: WMI: Mapper loaded
[ 0.107635] PCI: Using ACPI for IRQ routing
[ 0.107760] Bluetooth: Core ver 2.15
[ 0.107796] NET: Registered protocol family 31
[ 0.107797] Bluetooth: HCI device and connection manager initialized
[ 0.107800] Bluetooth: HCI socket layer initialized
[ 0.107801] NetLabel: Initializing
[ 0.107803] NetLabel: domain hash size = 128
[ 0.107804] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.107815] NetLabel: unlabeled traffic allowed by default
[ 0.107842] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.107847] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.113355] pnp: PnP ACPI init
[ 0.113376] ACPI: bus type pnp registered
[ 0.118043] pnp: PnP ACPI: found 15 devices
[ 0.118046] ACPI: ACPI bus type pnp unregistered
[ 0.118050] PnPBIOS: Disabled by ACPI PNP
[ 0.118062] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[ 0.118065] system 00:01: iomem range 0xfed90000-0xfed93fff has been reserved
[ 0.118072] system 00:07: ioport range 0xa00-0xa0f has been reserved
[ 0.118075] system 00:07: ioport range 0xa10-0xa1f has been reserved
[ 0.118077] system 00:07: ioport range 0xa20-0xa2f has been reserved
[ 0.118079] system 00:07: ioport range 0xa30-0xa3f has been reserved
[ 0.118084] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 0.118086] system 00:08: ioport range 0x800-0x87f has been reserved
[ 0.118089] system 00:08: ioport range 0x480-0x4bf has been reserved
[ 0.118091] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.118094] system 00:08: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 0.118099] system 00:0b: iomem range 0xffc00000-0xffefffff has been reserved
[ 0.118104] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.118107] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.118111] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.118116] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
[ 0.118118] system 00:0e: iomem range 0xc0000-0xcffff could not be reserved
[ 0.118121] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
[ 0.118123] system 00:0e: iomem range 0x100000-0x7ddfffff could not be reserved
[ 0.152769] AppArmor: AppArmor Filesystem Enabled
[ 0.152805] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
[ 0.152807] pci 0000:00:1c.0: IO window: disabled
[ 0.152811] pci 0000:00:1c.0: MEM window: disabled
[ 0.152815] pci 0000:00:1c.0: PREFETCH window: disabled
[ 0.152819] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
[ 0.152821] pci 0000:00:1c.1: IO window: 0xd000-0xdfff
[ 0.152826] pci 0000:00:1c.1: MEM window: 0xfea00000-0xfeafffff
[ 0.152830] pci 0000:00:1c.1: PREFETCH window: 0x000000fdf00000-0x000000fdffffff
[ 0.152836] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
[ 0.152838] pci 0000:00:1e.0: IO window: 0xe000-0xefff
[ 0.152843] pci 0000:00:1e.0: MEM window: 0xfeb00000-0xfebfffff
[ 0.152846] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.152859] alloc irq_desc for 16 on node -1
[ 0.152860] alloc kstat_irqs on node -1
[ 0.152866] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.152871] pci 0000:00:1c.0: setting latency timer to 64
[ 0.152877] alloc irq_desc for 17 on node -1
[ 0.152878] alloc kstat_irqs on node -1
[ 0.152881] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.152885] pci 0000:00:1c.1: setting latency timer to 64
[ 0.152891] pci 0000:00:1e.0: setting latency timer to 64
[ 0.152895] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.152897] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.152900] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff]
[ 0.152902] pci_bus 0000:02: resource 1 mem: [0xfea00000-0xfeafffff]
[ 0.152904] pci_bus 0000:02: resource 2 pref mem [0xfdf00000-0xfdffffff]
[ 0.152906] pci_bus 0000:03: resource 0 io: [0xe000-0xefff]
[ 0.152908] pci_bus 0000:03: resource 1 mem: [0xfeb00000-0xfebfffff]
[ 0.152911] pci_bus 0000:03: resource 3 io: [0x00-0xffff]
[ 0.152913] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff]
[ 0.152943] NET: Registered protocol family 2
[ 0.153021] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.153258] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.153730] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.154000] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.154003] TCP reno registered
[ 0.154106] NET: Registered protocol family 1
[ 0.154161] Trying to unpack rootfs image as initramfs...
[ 0.324942] Freeing initrd memory: 7466k freed
[ 0.328235] cpufreq-nforce2: No nForce2 chipset.
[ 0.328260] Scanning for low memory corruption every 60 seconds
[ 0.328359] audit: initializing netlink socket (disabled)
[ 0.328374] type=2000 audit(1263289906.328:1): initialized
[ 0.336149] highmem bounce pool size: 64 pages
[ 0.336154] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.337300] VFS: Disk quotas dquot_6.5.2
[ 0.337350] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.337822] fuse init (API version 7.12)
[ 0.337897] msgmni has been set to 1706
[ 0.338076] alg: No test for stdrng (krng)
[ 0.338088] io scheduler noop registered
[ 0.338090] io scheduler anticipatory registered
[ 0.338091] io scheduler deadline registered
[ 0.338135] io scheduler cfq registered (default)
[ 0.338147] pci 0000:00:02.0: Boot video device
[ 0.338312] alloc irq_desc for 24 on node -1
[ 0.338315] alloc kstat_irqs on node -1
[ 0.338324] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.338332] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 0.338440] alloc irq_desc for 25 on node -1
[ 0.338441] alloc kstat_irqs on node -1
[ 0.338448] pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 0.338455] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 0.338532] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.338599] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.338698] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.338701] ACPI: Power Button [PWRF]
[ 0.338748] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.338754] ACPI: Power Button [PWRB]
[ 0.339017] processor LNXCPU:00: registered as cooling_device0
[ 0.343675] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.343683] ACPI: Thermal Zone [THRM] (30 C)
[ 0.343731] isapnp: Scanning for PnP cards...
[ 0.504084] Switched to high resolution mode on CPU 0
[ 0.697667] isapnp: No Plug & Play device found
[ 0.698656] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.699817] brd: module loaded
[ 0.700204] loop: module loaded
[ 0.700275] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 0.700361] ata_piix 0000:00:1f.2: version 2.13
[ 0.700377] alloc irq_desc for 19 on node -1
[ 0.700379] alloc kstat_irqs on node -1
[ 0.700386] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.700390] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.700426] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.700492] scsi0 : ata_piix
[ 0.700573] scsi1 : ata_piix
[ 0.701872] ata1: SATA max UDMA/133 cmd 0xc080 ctl 0xc000 bmdma 0xb800 irq 19
[ 0.701875] ata2: SATA max UDMA/133 cmd 0xbc00 ctl 0xb880 bmdma 0xb808 irq 19
[ 0.702502] Fixed MDIO Bus: probed
[ 0.702531] PPP generic driver version 2.4.2
[ 0.702623] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.702646] alloc irq_desc for 23 on node -1
[ 0.702648] alloc kstat_irqs on node -1
[ 0.702655] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.702670] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.702673] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.702728] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.706641] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.706647] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.706846] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe9f7c00
[ 0.720031] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.720155] usb usb1: configuration #1 chosen from 1 choice
[ 0.720198] hub 1-0:1.0: USB hub found
[ 0.720209] hub 1-0:1.0: 8 ports detected
[ 0.720299] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.720330] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.720366] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.720373] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.720376] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.720412] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.720436] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c880
[ 0.720503] usb usb2: configuration #1 chosen from 1 choice
[ 0.720530] hub 2-0:1.0: USB hub found
[ 0.720536] hub 2-0:1.0: 2 ports detected
[ 0.720577] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.720584] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.720587] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.720616] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.720639] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c800
[ 0.720707] usb usb3: configuration #1 chosen from 1 choice
[ 0.720728] hub 3-0:1.0: USB hub found
[ 0.720734] hub 3-0:1.0: 2 ports detected
[ 0.720774] alloc irq_desc for 18 on node -1
[ 0.720776] alloc kstat_irqs on node -1
[ 0.720783] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.720788] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.720791] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.720820] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.720850] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c480
[ 0.720917] usb usb4: configuration #1 chosen from 1 choice
[ 0.720939] hub 4-0:1.0: USB hub found
[ 0.720944] hub 4-0:1.0: 2 ports detected
[ 0.720986] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 0.720993] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.720996] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.721028] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.721058] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000c400
[ 0.721124] usb usb5: configuration #1 chosen from 1 choice
[ 0.721149] hub 5-0:1.0: USB hub found
[ 0.721155] hub 5-0:1.0: 2 ports detected
[ 0.721247] PNP: No PS/2 controller found. Probing ports directly.
[ 0.721577] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.721586] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.721671] mice: PS/2 mouse device common for all mice
[ 0.721796] rtc_cmos 00:03: RTC can wake from S4
[ 0.721843] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.721870] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.722034] device-mapper: uevent: version 1.0.3
[ 0.722141] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx
[ 0.722218] device-mapper: multipath: version 1.1.0 loaded
[ 0.722220] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.722340] EISA: Probing bus 0 at eisa.0
[ 0.722364] EISA: Detected 0 cards.
[ 0.722407] cpuidle: using governor ladder
[ 0.722409] cpuidle: using governor menu
[ 0.722796] TCP cubic registered
[ 0.722923] NET: Registered protocol family 10
[ 0.723267] lo: Disabled Privacy Extensions
[ 0.723490] NET: Registered protocol family 17
[ 0.723510] Bluetooth: L2CAP ver 2.13
[ 0.723512] Bluetooth: L2CAP socket layer initialized
[ 0.723514] Bluetooth: SCO (Voice Link) ver 0.6
[ 0.723515] Bluetooth: SCO socket layer initialized
[ 0.723552] Bluetooth: RFCOMM TTY layer initialized
[ 0.723555] Bluetooth: RFCOMM socket layer initialized
[ 0.723557] Bluetooth: RFCOMM ver 1.11
[ 0.723587] Using IPI No-Shortcut mode
[ 0.723653] PM: Resume from disk failed.
[ 0.723665] registered taskstats version 1
[ 0.723756] Magic number: 10:162:879
[ 0.723827] rtc_cmos 00:03: setting system clock to 2010-01-12 09:51:47 UTC (1263289907)
[ 0.723830] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.723831] EDD information not available.
[ 0.897549] ata1.00: ATA-8: WDC WD3200AAKS-75L9A0, 02.03E02, max UDMA/133
[ 0.897554] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.897628] ata1.01: ATAPI: TSSTcorp DVD+/-RW TS-H653G, DW10, max UDMA/100
[ 0.897656] ata1.01: applying bridge limits
[ 0.913145] ata1.00: configured for UDMA/133
[ 0.928271] ata1.01: configured for UDMA/100
[ 0.928747] scsi 0:0:0:0: Direct-Access ATA WDC WD3200AAKS-7 02.0 PQ: 0 ANSI: 5
[ 0.928925] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 0.929292] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 0.929365] sd 0:0:0:0: [sda] Write Protect is off
[ 0.929369] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.929407] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.929601] sda: sda1 sda2 sda3 sda4 <
[ 0.935777] scsi 0:0:1:0: CD-ROM TSSTcorp DVD+-RW TS-H653G DW10 PQ: 0 ANSI: 5
[ 0.951232] sda5 sda6 >
[ 0.968819] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.971008] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 0.971013] Uniform CD-ROM driver Revision: 3.20
[ 0.971131] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 0.971205] sr 0:0:1:0: Attached scsi generic sg1 type 5
[ 0.971243] Freeing unused kernel memory: 540k freed
[ 0.971472] Write protecting the kernel text: 4568k
[ 0.971496] Write protecting the kernel read-only data: 1836k
[ 1.087402] Linux agpgart interface v0.103
[ 1.128553] agpgart-intel 0000:00:00.0: Intel G41 Chipset
[ 1.128698] agpgart-intel 0000:00:00.0: detected 32764K stolen memory
[ 1.131134] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 1.241152] [drm] Initialized drm 1.1.0 20060810
[ 1.265437] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.265442] i915 0000:00:02.0: setting latency timer to 64
[ 1.266950] alloc irq_desc for 26 on node -1
[ 1.266953] alloc kstat_irqs on node -1
[ 1.266961] i915 0000:00:02.0: irq 26 for MSI/MSI-X
[ 1.272057] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.272073] r8169 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.272107] r8169 0000:02:00.0: setting latency timer to 64
[ 1.272148] alloc irq_desc for 27 on node -1
[ 1.272150] alloc kstat_irqs on node -1
[ 1.272163] r8169 0000:02:00.0: irq 27 for MSI/MSI-X
[ 1.272617] eth0: RTL8102e at 0xf867c000, 00:25:64:04:d2:1d, XID 34c00000 IRQ 27
[ 1.287671] FDC 0 is a post-1991 82077
[ 1.292030] usb 2-1: new low speed USB device using uhci_hcd and address 2
[ 1.293123] i2c-adapter i2c-0: unable to read EDID block.
[ 1.293126] i915 0000:00:02.0: VGA-1: no EDID data
[ 1.356048] i2c-adapter i2c-1: unable to read EDID block.
[ 1.356054] i915 0000:00:02.0: VGA-1: no EDID data
[ 1.356276] [drm:drm_helper_initial_config] *ERROR* connectors have no modes, using standard modes
[ 1.358633] [drm] fb0: inteldrmfb frame buffer device
[ 1.358682] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 1.428594] [drm] DAC-6: set mode 800x600 9
[ 1.450309] Console: switching to colour frame buffer device 100x37
[ 1.506751] usb 2-1: configuration #1 chosen from 1 choice
[ 1.515307] usbcore: registered new interface driver hiddev
[ 1.530001] input: Dell Dell USB Entry Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input3
[ 1.530063] generic-usb 0003:413C:2107.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Entry Keyboard] on usb-0000:00:1d.0-1/input0
[ 1.530079] usbcore: registered new interface driver usbhid
[ 1.530082] usbhid: v2.6:USB HID core driver
[ 1.748035] usb 3-2: new low speed USB device using uhci_hcd and address 2
[ 1.917137] usb 3-2: configuration #1 chosen from 1 choice
[ 1.933858] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input4
[ 1.933930] generic-usb 0003:0461:4D22.0002: input,hidraw1: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.1-2/input0
[ 2.268694] PM: Starting manual resume from disk
[ 2.268698] PM: Resume from partition 8:6
[ 2.268700] PM: Checking hibernation image.
[ 2.268899] PM: Resume from disk failed.
[ 2.293229] EXT4-fs (sda5): barriers enabled
[ 2.310466] kjournald2 starting: pid 366, dev sda5:8, commit interval 5 seconds
[ 2.310486] EXT4-fs (sda5): delayed allocation enabled
[ 2.310491] EXT4-fs: file extents enabled
[ 2.318868] EXT4-fs: mballoc enabled
[ 2.318883] EXT4-fs (sda5): mounted filesystem with ordered data mode
[ 2.764462] type=1505 audit(1263289909.540:2): operation="profile_load" pid=389 name=/usr/share/gdm/guest-session/Xsession
[ 2.767311] type=1505 audit(1263289909.540:3): operation="profile_load" pid=390 name=/sbin/dhclient3
[ 2.767987] type=1505 audit(1263289909.540:4): operation="profile_load" pid=390 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 2.768370] type=1505 audit(1263289909.544:5): operation="profile_load" pid=390 name=/usr/lib/connman/scripts/dhclient-script
[ 2.811961] type=1505 audit(1263289909.584:6): operation="profile_load" pid=391 name=/usr/bin/evince
[ 2.822427] type=1505 audit(1263289909.596:7): operation="profile_load" pid=391 name=/usr/bin/evince-previewer
[ 2.828610] type=1505 audit(1263289909.604:8): operation="profile_load" pid=391 name=/usr/bin/evince-thumbnailer
[ 2.842072] type=1505 audit(1263289909.616:9): operation="profile_load" pid=393 name=/usr/lib/cups/backend/cups-pdf
[ 2.843001] type=1505 audit(1263289909.616:10): operation="profile_load" pid=393 name=/usr/sbin/cupsd
[ 3.638011] Adding 4996172k swap on /dev/sda6. Priority:-1 extents:1 across:4996172k
[ 3.757997] EXT4-fs (sda5): internal journal on sda5:8
[ 3.870781] udev: starting version 147
[ 4.502303] lp: driver loaded but no devices found
[ 4.696686] intel_rng: Firmware space is locked read-only. If you can't or
[ 4.696688] intel_rng: don't want to disable this in firmware setup, and if
[ 4.696689] intel_rng: you are certain that your system has a functional
[ 4.696690] intel_rng: RNG, try using the 'no_fwh_detect' option.
[ 4.956990] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 4.982110] dell-wmi: No known WMI GUID found
[ 5.621425] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.621451] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 5.718501] hda_codec: Unknown model for ALC662 rev1, trying auto-probe from BIOS...
[ 5.719758] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
[ 5.890847] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 6.326779] __ratelimit: 3 callbacks suppressed
[ 6.326783] type=1505 audit(1263307913.100:12): operation="profile_replace" pid=791 name=/usr/share/gdm/guest-session/Xsession
[ 6.328795] type=1505 audit(1263307913.104:13): operation="profile_replace" pid=792 name=/sbin/dhclient3
[ 6.329475] type=1505 audit(1263307913.104:14): operation="profile_replace" pid=792 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 6.329845] type=1505 audit(1263307913.104:15): operation="profile_replace" pid=792 name=/usr/lib/connman/scripts/dhclient-script
[ 6.333959] type=1505 audit(1263307913.108:16): operation="profile_replace" pid=793 name=/usr/bin/evince
[ 6.345480] type=1505 audit(1263307913.120:17): operation="profile_replace" pid=793 name=/usr/bin/evince-previewer
[ 6.351799] type=1505 audit(1263307913.124:18): operation="profile_replace" pid=793 name=/usr/bin/evince-thumbnailer
[ 6.360965] type=1505 audit(1263307913.136:19): operation="profile_replace" pid=795 name=/usr/lib/cups/backend/cups-pdf
[ 6.361755] type=1505 audit(1263307913.136:20): operation="profile_replace" pid=795 name=/usr/sbin/cupsd
[ 6.364321] type=1505 audit(1263307913.140:21): operation="profile_replace" pid=796 name=/usr/sbin/tcpdump
[ 8.260837] r8169: eth0: link down
[ 8.261017] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 8.968993] ppdev: user-space parallel port driver
[ 11.592052] i2c-adapter i2c-1: unable to read EDID block.
[ 11.592057] i915 0000:00:02.0: VGA-1: no EDID data
[ 11.656049] i2c-adapter i2c-0: unable to read EDID block.
[ 11.656054] i915 0000:00:02.0: VGA-1: no EDID data
[ 11.744046] i2c-adapter i2c-0: unable to read EDID block.
[ 11.744052] i915 0000:00:02.0: VGA-1: no EDID data
[ 11.808061] i2c-adapter i2c-1: unable to read EDID block.
[ 11.808067] i915 0000:00:02.0: VGA-1: no EDID data
[ 15.020050] i2c-adapter i2c-1: unable to read EDID block.
[ 15.020056] i915 0000:00:02.0: VGA-1: no EDID data
[ 15.084048] i2c-adapter i2c-0: unable to read EDID block.
[ 15.084054] i915 0000:00:02.0: VGA-1: no EDID data
[ 15.184049] i2c-adapter i2c-0: unable to read EDID block.
[ 15.184055] i915 0000:00:02.0: VGA-1: no EDID data
[ 15.248049] i2c-adapter i2c-1: unable to read EDID block.
[ 15.248054] i915 0000:00:02.0: VGA-1: no EDID data
[ 15.356046] i2c-adapter i2c-1: unable to read EDID block.
[ 15.356052] i915 0000:00:02.0: VGA-1: no EDID data
[ 15.420048] i2c-adapter i2c-0: unable to read EDID block.
[ 15.420054] i915 0000:00:02.0: VGA-1: no EDID data
[ 17.252059] i2c-adapter i2c-0: unable to read EDID block.
[ 17.252065] i915 0000:00:02.0: VGA-1: no EDID data
[ 17.316046] i2c-adapter i2c-1: unable to read EDID block.
[ 17.316052] i915 0000:00:02.0: VGA-1: no EDID data
Module Size Used by
binfmt_misc 8356 1
ppdev 6688 0
iptable_filter 3100 0
ip_tables 11692 1 iptable_filter
x_tables 16544 1 ip_tables
snd_hda_codec_realtek 203328 1
snd_hda_intel 26920 2
snd_hda_codec 75708 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 7200 1 snd_hda_codec
snd_pcm_oss 37920 0
snd_mixer_oss 16028 1 snd_pcm_oss
snd_pcm 75296 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_dummy 2656 0
snd_seq_oss 28576 0
snd_seq_midi 6432 0
snd_rawmidi 22208 1 snd_seq_midi
snd_seq_midi_event 6940 2 snd_seq_oss,snd_seq_midi
snd_seq 50224 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 22276 2 snd_pcm,snd_seq
snd_seq_device 6920 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd 59204 16 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
dell_wmi 2564 0
dcdbas 7292 0
soundcore 7264 1 snd
snd_page_alloc 9156 2 snd_hda_intel,snd_pcm
psmouse 56180 0
serio_raw 5280 0
lp 8964 0
parport 35340 2 ppdev,lp
usbhid 38208 0
fbcon 36640 72
tileblit 2460 1 fbcon
font 8124 1 fbcon
bitblit 5372 1 fbcon
softcursor 1756 1 bitblit
r8169 32064 0
mii 5212 1 r8169
floppy 54916 0
i915 221064 3
drm 159584 3 i915
i2c_algo_bit 5760 1 i915
video 19380 1 i915
output 2780 1 video
intel_agp 27484 2 i915
agpgart 34988 2 drm,intel_agp
