John Try: From http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php download hsfmodem-7.80.02.05full_k2.6.31_17_generic_ubuntu_i386.deb.zip Under Linux unpack with: $ unzip hsfmodem*.zip Then install with: $ sudo dpkg -i hsfmodem*.deb Subsequently, the modem should be found with $ sudo wvdialconf /etc/wvdial.conf Edit in your personal information with: $ sudo gedit /etc/wvdial.conf and try dialing out with: $ sudo wvdial. See DOCs/Testing.txt for details. Support for Conexant chips hosted on High Definition Audio cards may require installation of additional packages, one of the alsa-driver-linuxant packages on http://www.linuxant.com/alsa-driver/ At the same time download the alsa-driver-1.0.17-1.patch , in case it prove to be later needed. During the hsfmodem install, there will be a message if there is necessary installation of alsa-driver-linuxant The installation command for a .deb suffic packages is, with root/adm permission: sudo dpkg -i hsf*.deb There may a message that "Dependencies" are not satisfied. In this case the Ubuntu/Debian packages to be installed are linux-libc-dev & libc6-dev. Package names may be different for other Linuxes. If not on your install CD, these packages can be searched for at http://packages.ubuntu.com. After download, they can be coinstalled with: sudo dpkg -i li*.deb Again try the alsa-driver-linuxant There may be a message that the patch must be applied. In this case get the ftp://ftp.alsa-project.org/pub/driver/alsa-driver-1.0.17.tar.bz2 Under Linux, this package is unpacked with: $ tar jxf alsa*.tar.bz2 Next the patch is applied with: $ patch -p0 < alsa-driver-1.0.17-1.patch MarvS On Thu, Jan 14, 2010 at 6:03 PM, John Holmgren <john_holmgren@xxxxxxxxxxx> wrote: > > Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server, > as HTML can contain viruses. Use as the email Subject Line: > YourName, YourCountry kernel 2.6.31-17-generic > With this Subject Line cogent experts will be alerted, and useful case names left in the Archive. > YourCountry will enable Country specific guidance. Linux experts in YourCountry > can be found through: http://www.linux.org/groups/index.html. > They will know your Country's modem code, which may be essential for dialup service. > Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters. > So in a day, also check the Archived responses at http://www.linmodems.org > -------------------------- System information ---------------------------- > CPU=i686, > Linux version 2.6.31-17-generic (buildd@palmer) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #54-Ubuntu SMP Thu Dec 10 16:20:31 UTC 2009 > scanModem update of: 2010_01_13 > > > Presently install your Linux Distributions dkms package. It provides for automated driver updates, > following upgrade of your kernel. For details see http://linux.dell.com/projects.shtml#dkms > > There are no blacklisted modem drivers in /etc/modprobe* files > > Potentially useful modem drivers now loaded are: > snd_hda_intel > > Attached USB devices are: > ID 0483:2016 SGS Thomson Microelectronics Fingerprint Reader > If a cellphone is not detected, see http://ubuntuforums.org/archive/index.php/t-878554.html > A sample report is: http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html > > If a USB modem or cellphone is attached and was not detected, please > provide available information in your request to discuss@xxxxxxxxxxxxx > > For candidate card in slot 00:1b.0, firmware information and bootup diagnostics are: > PCI slot PCI ID SubsystemID Name > ---------- --------- --------- -------------- > 00:1b.0 8086:27d8 17aa:2010 Audio device: Intel Corporation 82801G > > Modem interrupt assignment and sharing: > 17: 14125 0 IO-APIC-fasteoi uhci_hcd:usb3, HDA Intel, ohci1394 > --- Bootup diagnostics for card in PCI slot 00:1b.0 ---- > [ 31.370211] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 > [ 31.370258] HDA Intel 0000:00:1b.0: setting latency timer to 64 > [ 31.593720] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8 > [ 285.544126] HDA Intel 0000:00:1b.0: PCI INT B disabled > [ 287.920237] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) > [ 288.439483] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 > [ 288.439491] HDA Intel 0000:00:1b.0: setting latency timer to 64 > [ 7884.300138] HDA Intel 0000:00:1b.0: PCI INT B disabled > [ 7886.688237] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) > [ 7887.400670] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 > [ 7887.400677] HDA Intel 0000:00:1b.0: setting latency timer to 64 > [14289.980118] HDA Intel 0000:00:1b.0: PCI INT B disabled > [14292.204237] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) > [14292.723672] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 > [14292.723679] HDA Intel 0000:00:1b.0: setting latency timer to 64 > [14595.576132] HDA Intel 0000:00:1b.0: PCI INT B disabled > [14597.292231] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) > [14598.391808] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 > [14598.391816] HDA Intel 0000:00:1b.0: setting latency timer to 64 > [16152.544120] HDA Intel 0000:00:1b.0: PCI INT B disabled > [16154.760236] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) > [16155.296101] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 > [16155.296109] HDA Intel 0000:00:1b.0: setting latency timer to 64 > [16877.172133] HDA Intel 0000:00:1b.0: PCI INT B disabled > [16879.392237] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) > [16879.920342] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 > [16879.920349] HDA Intel 0000:00:1b.0: setting latency timer to 64 > [25908.108130] HDA Intel 0000:00:1b.0: PCI INT B disabled > [25910.320238] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) > [25910.847879] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 > [25910.847886] HDA Intel 0000:00:1b.0: setting latency timer to 64 > [31204.716128] HDA Intel 0000:00:1b.0: PCI INT B disabled > [31207.096237] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) > [31207.815244] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 > [31207.815251] HDA Intel 0000:00:1b.0: setting latency timer to 64 > [46017.136188] HDA Intel 0000:00:1b.0: PCI INT B disabled > [46019.380237] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) > [46019.899992] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 > [46019.900000] HDA Intel 0000:00:1b.0: setting latency timer to 64 > [46399.648184] HDA Intel 0000:00:1b.0: PCI INT B disabled > [46401.892237] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) > [46402.414748] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 > [46402.414755] HDA Intel 0000:00:1b.0: setting latency timer to 64 > [46761.360167] HDA Intel 0000:00:1b.0: PCI INT B disabled > [46763.572236] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) > [46764.092830] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 > [46764.092838] HDA Intel 0000:00:1b.0: setting latency timer to 64 > > The PCI slot 00:1b.0 of the modem card may be disabled early in > a bootup process, but then enabled later. If modem drivers load > but the modem is not responsive, read DOCs/Bootup.txt about possible fixes. > Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx > if help is needed. > > > > ===== Advanced Linux Sound Architecture (ALSA) diagnostics ===== > The ALSA packages provide audio support and also drivers for some modems. > ALSA diagnostics are written during bootup to /proc/asound/ folders. > > The ALSA verion is 1.0.20 > The modem cards detected by "aplay -l" are: None > > > The /proc/asound/pcm file reports: > ----------------------- > 00-00: AD198x Analog : AD198x Analog : playback 1 : capture 1 > 00-01: AD198x Digital : AD198x Digital : playback 1 > > about /proc/asound/cards: > ------------------------ > 0 [Intel ]: HDA-Intel - HDA Intel > HDA Intel at 0xee240000 irq 17 > > PCI slot 00:1b.0 has a High Definition Audio Card > The drivers are in the kernel modules tree at: > /lib/modules/2.6.31-16-generic/kernel/sound/pci/hda/snd-hda-intel.ko > /lib/modules/2.6.31-17-generic/kernel/sound/pci/hda/snd-hda-intel.ko > /lib/modules/2.6.31-14-generic/kernel/sound/pci/hda/snd-hda-intel.ko > /lib/modules/2.6.31-15-generic/kernel/sound/pci/hda/snd-hda-intel.ko > UNEXPECTED HDA diagnostic outcome. > === Finished firmware and bootup diagnostics, next deducing cogent software. === > > Predictive diagnostics for card in bus 00:1b.0: > Modem chipset detected on > NAME="Audio device: Intel Corporation 82801G " > CLASS=0403 > PCIDEV=8086:27d8 > SUBSYS=17aa:2010 > IRQ=17 > HDA=8086:27d8 > SOFT=8086:27d8.HDA > ArchivedChip=0x14f12bfa > CodecClass=14f1 > IDENT=hsfmodem > Driver=hsfmodem-drivers > > For candidate modem in: 00:1b.0 > 0403 Audio device: Intel Corporation 82801G > Primary device ID: 8086:27d8 > Subsystem PCI_id 17aa:2010 > Softmodem codec or chipset from diagnostics: > from Archives: 0x14f12bfa > > > > Support type needed or chipset: hsfmodem > > > Writing DOCs/Intel.txt > > For owners of a Dell PCs with Conexant HSF modems, a driver source package with full speed enabled is available, but requires driver compiling. Read DOCs/Conexant.txt > > From http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php > download hsfmodem-7.80.02.05full_k2.6.31_17_generic_ubuntu_i386.deb.zip > Under Linux unpack with: > $ unzip hsfmodem*.zip > Then install with: > $ sudo dpkg -i hsfmodem*.deb > Subsequently, the modem should be found with > $ sudo wvdialconf /etc/wvdial.conf > Edit in your personal information with: > $ sudo gedit /etc/wvdial.conf > and try dialing out with: > $ sudo wvdial. > See DOCs/Testing.txt for details. > > The directions following below need only be pursued, if the above procedures are not adequate. > > Start at http://www.linuxant.com/drivers/hsf/downloads-license.php to find the > hsfmodem package matching your System. For several Linux distros, there are > precompiled drivers matched to specific kernels. These have within the FileName, > your KernelVersion: 2.6.31_17_generic > They can be found through http://www.linuxant.com/drivers/hsf/full/downloads.php > A more precise location may be given a few paragraphs below. > If an EXACT Match with your your KernelVersion is not found, one of the > "Generic packages with source" near the bottom of the page must be used. > Downloaded packages must be moved into the Linux partition (home folder is OK) > and unzipped with: > unzip hsf*.zip > The installation command for a .deb suffic packages is, with root/adm permission: > sudo dpkg -i hsf*.deb > while for .rpm suffix it is, with: > rpm -i hsf*.rpm > > Support for Conexant chips hosted on High Definition Audio cards may require > installation of additional packages, one of the alsa-driver-linuxant packages > on http://www.linuxant.com/alsa-driver/ ; At the same time download the > alsa-driver-1.0.17-1.patch , in case it prove to be later needed. During the > hsfmodem install, there will be a message if there is necessary installation of > alsa-driver-linuxant > > The installation command for a .deb suffic packages is, with root/adm permission: > sudo dpkg -i hsf*.deb > while for .rpm suffix it is, with: > rpm -i hsf*.rpm > > There may a message that "Dependencies" are not satisfied. In this case the Ubuntu/Debian packages to be installed are linux-libc-dev & libc6-dev. Package > names may be different for other Linuxes. If not on your install CD, these > packages can be searched for at http://packages.ubuntu.com. ; After download, > they can be coinstalled with: > sudo dpkg -i li*.deb > Again try the alsa-driver-linuxant > > There may be a message that the patch must be applied. In this case get the > ftp://ftp.alsa-project.org/pub/driver/alsa-driver-1.0.17.tar.bz2 > Under Linux, this package is unpacked with: > $ tar jxf alsa*.tar.bz2 > Next the patch is applied with: > $ patch -p0 < alsa-driver-1.0.17-1.patch > > See http://linmodems.technion.ac.il/bigarch/archive-eighth/msg00838.html > for details on compiling and installing replacement snd-hda-intel + its > dependent drivers. > After the installation is completed, rerun the hsfmodem installation. > Reboot and try to detect the modem with Root permission: > sudo wvdialconf /etc/wvdial.conf > > Read DOCs/Conexant.txt > > Writing DOCs/Conexant.txt > > > Completed candidate modem analyses. > > The base of the UDEV device file system is: /dev/.udev > > Versions adequately match for the compiler installed: 4.4.1 > and the compiler used in kernel assembly: 4.4.1 > > The patch utility is needed for compiling ALSA drivers, and possibly others. > > > Minimal compiling resources appear complete: > make utility - /usr/bin/make > Compiler version 4.4 > linuc_headers base folder /lib/modules/2.6.31-17-generic/build > > However some compilations and executable functions may need additional files, > in the FileNames.h (so called kernel "h"eaders) collection installed in /usr/include/ . > For martian_modem, additional required packages are needed. The also required headers of package libc6 are commonly installed by default. > Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions. > In not included on your install CD, search for them at http://packages.ubuntu.com > or comparable Repository for other Linux distros. > When compiling ALSA drivers, the utility "patch" will also be needed. > > > > > If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then > Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev > and any of its dependents, under Ubuntu linux-libc-dev > > If an alternate ethernet connection is available, > $ apt-get update > $ apt-get -s install linux-kernel-devel > will install needed packages. > For Debian/Ubuntu related distributions, run the following command to display the needed package list: > > Otherwise packages have to be found through http://packages.ubuntu.com > Once downloaded and transferred into a Linux partition, > they can be installed alltogether with: > $ sudo dpkg -i *.deb > > > Checking pppd properties: > -rwsr-xr-- 1 root dip 277352 2009-02-20 09:25 /usr/sbin/pppd > > In case of an "error 17" "serial loopback" problem, see: > http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html > > To enable dialout without Root permission do: > $ su - root (not for Ubuntu) > sudo chmod a+x /usr/sbin/pppd > or under Ubuntu related Linuxes > sudo chmod a+x /usr/sbin/pppd > > Checking settings of: /etc/ppp/options > asyncmap 0 > noauth > crtscts > lock > hide-password > modem > proxyarp > lcp-echo-interval 30 > lcp-echo-failure 4 > noipx > > In case of a message like: > Warning: Could not modify /etc/ppp/pap-secrets: Permission denied > see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html > > For guidance on FAX usage, get from http://linmodems.technion.ac.il/packages/ ; get faxing.tar.gz > It has samples for a modem using port /dev/ttySL0, which must be changed to match your modem's port. > > Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 wlan0 wmaster0 > Which can interfere with Browser naviagation. > > Don't worry about the following, it is for experts should trouble shooting be necessary. > ========================================================== > > Checking for modem support lines: > -------------------------------------- > /device/modem symbolic link: > slmodemd created symbolic link /dev/ttySL0: > Within /etc/udev/ files: > > Within /etc/modprobe.conf files: > /etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order to blacklist unwanted modem drivers > /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem > /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem > /etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2 > /etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2 > Within any ancient /etc/devfs files: > > Within ancient kernel 2.4.n /etc/module.conf files: > > --------- end modem support lines -------- > > > John Holmgren > john_holmgren@xxxxxxxxxxx > > > > _________________________________________________________________ > Hotmail: Trusted email with Microsoft’s powerful SPAM protection. > http://clk.atdmt.com/GBL/go/196390706/direct/01/
