Hi. I need help setting up my modem for my old gateway laptop.
Here is the modem data file:
-------------------------- System information ----------------------------
CPU=i686, Linux Mint 6 Felicia Fluxbox CE
Linux version 2.6.27-7-generic (buildd@rothera) (gcc version 4.3.2 (Ubuntu
4.3.2-1ubuntu10) ) #1 SMP Fri Oct 24 06:42:44 UTC 2008
scanModem update of: 2010_01_09
Presently install your Linux Distributions dkms package. It provides for
automated driver updates,
following upgrade of your kernel. For details see
http://linux.dell.com/projects.shtml#dkms
There are no blacklisted modem drivers in /etc/modprobe* files
Potentially useful modem drivers now loaded are:
Attached USB devices are:
ID 0483:2016 SGS Thomson Microelectronics Fingerprint Reader
If a cellphone is not detected, see
http://ubuntuforums.org/archive/index.php/t-878554.html
A sample report is:
http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html
If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@xxxxxxxxxxxxx
For candidate card in slot 00:1f.6, firmware information and bootup
diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:1f.6 8086:24c6 144f:1050 Modem: Intel Corporation 82801DB/DBL/DBM
Modem interrupt assignment and sharing:
10: 30668 XT-PIC-XT ehci_hcd:usb1, uhci_hcd:usb4, yenta,
yenta, Intel 82801DB-ICH4
--- Bootup diagnostics for card in PCI slot 00:1f.6 ----
[ 0.484701] PCI: 0000:00:1f.6 reg 10 io port: [2400, 24ff]
[ 0.484708] PCI: 0000:00:1f.6 reg 14 io port: [2000, 207f]
[ 0.484742] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[ 0.484747] pci 0000:00:1f.6: PME# disabled
[ 1.772493] serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 10
(level, low) -> IRQ 10
[ 1.772501] serial 0000:00:1f.6: PCI INT B disabled
The PCI slot 00:1f.6 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible
fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
----------------------------------------------------------------------------
And here is my modem's specifications from the gateway website:
http://support.gateway.com/s/Mobile/Gateway/450ROG/3501353sp64.shtml
Manufacturer BroMax
Model number BIM560–CF
Modem standards Hayes AT command set
ITU–T V.32bis
ITU–T V.32bis
ITU–T V.34+
ITU–T V.90
Fax standards ITU–T V.17
ITU–T V.21 Channel 2
ITU–T V.27ter
ITU–T V.29
ITU–T Group III
EIA Class 1 Commends
Dialing capability Tone and pulse
Error correction MNP levels 2–4
ITU–T V.42
Data compression MNP levels 5 ITU–T V.42bis
Operation modes Asynchronous
Full–Duplex
Automatic and manual call originate
Automatic and manual answer
Pulse dialing rate 10 pps or 20 pps
39/61 or 33/67 Make–to–Break ratio
Asynchronous data rates Transmission rate fall–back through 300 bps
Asynchronous character format Up to 10 bits, including data, start, stop,
and parity bits
Tones detected Dial, Busy, Ring–Back, and Modem Answer tones
Blind dialing based on time–out periods is available for incompatible tones
Line requirement Public Switched Telephone Network
Ringer equivalence 0.3B
Receive sensibility –43 dBm
Certification FCC Certified
--
Dolores
