I have installed all the headers (libc6-dev 2.7-10ubuntu4_i386.deb and linux-libc-dev 2.6.24-26.64_i386.deb ) Now I am getting a different error message when I run "sudo make all " celestine@localhost:/usr/src/agrsm048pci-2.1.60$ sudo make all sudo: unable to resolve host localhost make -C /lib/modules/2.6.24-24-generic/build SUBDIRS= modules make[1]: Entering directory `/usr/src/linux-headers-2.6.24-24-generic' CHK include/linux/version.h CHK include/linux/utsrelease.h make[2]: *** No rule to make target `arch/x86/kernel/asm-offsets.c', needed by `arch/x86/kernel/asm-offsets.s'. Stop. make[1]: *** [prepare0] Error 2 make[1]: Leaving directory `/usr/src/linux-headers-2.6.24-24-generic' make: *** [modules] Error 2 Pls help on what to do next..... ----- Original Message ---- > From: Joshua Gordon Crawford <jgcrawford@xxxxxxxxx> > To: celestine preetham <mastercelestinepreetham@xxxxxxxxx> > Cc: Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx>; Antonio Olivares <olivares14031@xxxxxxxxx>; discuss@xxxxxxxxxxxxx > Sent: Tue, 22 December, 2009 5:12:26 AM > Subject: Re: celestine , India , 2.6.24-24generic > > 2009/12/22 celestine preetham : > > I am having AMD64 bit system but all my software are 32bit , will it create > problems ? > > This code is not compatible with 64-bit systems, due to a pre-compiled > 32-bit component. However, previous attempts have been on fully 64-bit > systems (kernel and software). I am unaware of what issues might exist > using 32-bit on a 64-bit system. > > > @Marvin > > I got a dependency error for libc6-dev (as libc6) . So I tried installing > libc6 but it does'nt install and displays that a higher version of this has > already been installed. I tried running 'make all' after installing > linux-libc-dev alone but it returned the same errors ( missing of .h files ) > > > > @ Joshua > > I tried using agrsm-20080203 and typed below the terminal display as executed > . I ve got a lot of ' warnings' and the program output steps seem shorter than > the ones present in the cogent message > http://linmodems.technion.ac.il/bigarch/archive-seventh/msg00849.html . Is it > installing properly ? > > It looks like the code compiles and installs okay. There were no > errors, and warnings can mostly be ignored. But the module doesn't > load. When you modprobe agrserial, there should be a message similar > to "Loading module Agere Modem Controller driver version > 2.1.60.0.Linspire (2005-11-16)". Remember to rmmod both modules after > each test, and to make uninstall before recompiling. > > > celestine@localhost:~/Desktop/agrsm$ make clean > > rm -fR agrsoftmodem.o serial26.o \ > > serial26.o \ > > agrsm_core.o \ > > agrmodem.{o,ko,mod.{c,o}} \ > > agrserial.{o,ko,mod.{c,o}} \ > > .*.cmd .tmp_versions > > celestine@localhost:~/Desktop/agrsm$ make > > make -C /lib/modules/2.6.24-24-generic/build > > SUBDIRS=/home/celestine/Desktop/agrsm modules > > \make[1]: Entering directory `/usr/src/linux-headers-2.6.24-24-generic' > > CC [M] /home/celestine/Desktop/agrsm/agrsoftmodem.o > > objcopy --weaken-symbol=LXHardwareInfoCreate \ > > --weaken-symbol=LXHardwareInfoDestroy > > \ > > /home/celestine/Desktop/agrsm/agrmodemlib.o > > /home/celestine/Desktop/agrsm/agrsm_core.o > > CC [M] /home/celestine/Desktop/agrsm/lib.o > > CC [M] /home/celestine/Desktop/agrsm/serial26.o > > /home/celestine/Desktop/agrsm/serial26.c: In function > > ‘serial8250_get_mctrl’: > > /home/celestine/Desktop/agrsm/serial26.c:1371: warning: unused variable > > ‘flags’ > > /home/celestine/Desktop/agrsm/serial26.c: In function > ‘serial8250_config_port’: > > /home/celestine/Desktop/agrsm/serial26.c:2039: warning: unused variable > > ‘ret’ > > /home/celestine/Desktop/agrsm/serial26.c: At top level: > > /home/celestine/Desktop/agrsm/serial26.c:2131: warning: initialization from > > incompatible pointer type > > /home/celestine/Desktop/agrsm/serial26.c:2132: warning: initialization from > > incompatible pointer type > > /home/celestine/Desktop/agrsm/serial26.c:1922: warning: > > ‘serial8250_request_rsa_resource’ defined but not used > > LD [M] /home/celestine/Desktop/agrsm/agrmodem.o > > LD [M] /home/celestine/Desktop/agrsm/agrserial.o > > Building modules, stage 2. > > MODPOST 2 modules > > WARNING: could not find /home/celestine/Desktop/agrsm/.agrsm_core.o.cmd for > > /home/celestine/Desktop/agrsm/agrsm_core.o > > CC /home/celestine/Desktop/agrsm/agrmodem.mod.o > > LD [M] /home/celestine/Desktop/agrsm/agrmodem.ko > > CC /home/celestine/Desktop/agrsm/agrserial.mod.o > > LD [M] /home/celestine/Desktop/agrsm/agrserial.ko > > make[1]: Leaving directory `/usr/src/linux-headers-2.6.24-24-generic' > > celestine@localhost:~/Desktop/agrsm$ sudo make install > > sudo: unable to resolve host localhost > > [sudo] password for celestine: > > make -C /lib/modules/2.6.24-24-generic/build > > M="/home/celestine/Desktop/agrsm" modules_install > > make[1]: Entering directory `/usr/src/linux-headers-2.6.24-24-generic' > > INSTALL > > /home/celestine/Desktop/agrsm/agrmodem.ko > > INSTALL > > /home/celestine/Desktop/agrsm/agrserial.ko > > DEPMOD 2.6.24.6 > > make[1]: Leaving directory `/usr/src/linux-headers-2.6.24-24-generic' > > if ! /sbin/modprobe -nq agrmodem.ko ; then /sbin/depmod -a; fi > > celestine@localhost:~/Desktop/agrsm$ sudo modprobe agrmodem > > sudo: unable to resolve host localhost > > celestine@localhost:~/Desktop/agrsm$ sudo modprobe agrserial > > sudo: unable to resolve host localhost > > celestine@localhost:~/Desktop/agrsm$ sudo wvdialconff > > sudo: unable to resolve host localhost > > sudo: wvdialconff: command not found > > celestine@localhost:~/Desktop/agrsm$ sudo wvdialconf > > sudo: unable to resolve host localhost > > Editing `/etc/wvdial.conf'. > > > > Scanning your serial ports for a modem. > > > > Modem Port Scan<*1>: S0 S1 S2 S3 > > ttySAGR<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 > > baud > > ttySAGR<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 > > baud > > ttySAGR<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. > > > > > > Sorry, no modem was detected! Is it in > > use by another program? > > Did you configure it properly with setserial? > > > > Please read the FAQ at http://open.nit.ca/wiki/?WvDial > > > > If you still have problems, send mail to . > > celestine@localhost:~/Desktop/agrsm$ > > > > Celestine Preetham > > > > > >> > >> Celestine, > >> > >> Copy future exchanges to Joshua, who is the expert on these 11c1:048c/f > modems > >> > >> RE: scripts/basic/fixdep.c:107:23: error: sys/types.h: No such file or > directory > >> scripts/basic/fixdep.c:108:22: error: sys/stat.h: No such file or directory > >> scripts/basic/fixdep.c:109:22: error: sys/mman.h: No such file or directory > >> scripts/basic/fixdep.c:110:20: error: unistd.h: No such file or directory > >> scripts/basic/fixdep.c:111:19: error: fcntl.h: No such file or directory > >> scripts/basic/fixdep.c:112:20: error: string.h: No such file or directory > >> scripts/basic/fixdep.c:113:20: error: stdlib.h: No such file or directory > >> scripts/basic/fixdep.c:114:19: error: stdio.h: No such file or directory > >> ---------- > >> > >> These *.h files will be provideI d by the files linux-libc-dev and > >> libc6-dev packages > >> Install them and again try the compiles. Start at > >> http://packages.ubuntu.com/hardy/libc6-dev > >> More probably, practice using the search engines at > >> http://packages.ubuntu.com, as you will likely need then in the > >> future. > >> > >> Until there is a successfull detection of the modem by > >> $ sudo wdialconf > >> none of the dialout tools will be successful > >> > >> On Sun, Dec 20, 2009 at 2:18 PM, celestine preetham > >> wrote: > >> > Yes I tried using the symbolic links as given the agrsm how tos between > SAGR , > >> AGS3 and modem but when I type pon on terminal , It says /dev/modem is > >> unrecognised (something similar) > >> > > >> > PS. have attached the error file I mentioned in my previous mail (sorry for > >> the mixup) > >> >> Celestine, > >> >> > >> >> On 12/20/09, celestine preetham wrote: > >> >> >> Thanks Antonio and Marvin for your support. > >> >> >> But I am facing some errors after " sudo make all " that I have > attached > >> >> >> . > >> >> >> Also I tried installing tarball for agrsm-20090418 but it returned > errors > >> >> >> . > >> >> >> But when I tried installing tarball agrsm-20070804 , there were no > errors > >> >> >> So should I consider using the older versions ? > >> >> > > >> >> If it works, why not? > >> >> Try it out, edit /etc/wvdial.conf and select /dev/modem as the modem > >> >> port, remember to make symbolic links > >> >> $ sudo ln -s /dev/ttyAG3 /dev/modem > >> >> or similar as provided in instructions, README/INSTALL and attempt a > dialout. > >> >> >> After installing tarbal agrsm-20070804 , wvdial.conf did not identify > any > >> >> >> modem > >> >> > > >> >> Try the above, i.e, dialout with wvdial with the /dev/modem as the > >> >> port after making symbolic links and see if it connects? > >> >> > >> >> Let us know how it goes. > >> >> > >> >> Regards, > >> >> > >> >> Antonio > >> >> >> I also tried the pci=noacpi bootup but in vain > >> >> >> > >> >> >> Thanks, > >> >> >> Celestine Preetham > >> >> >> > >> >> >> > >> >> >> > >> >> >> ----- Original Message ---- > >> >> >> > From: Marvin Stodolsky > >> >> >> > To: Antonio Olivares > >> >> >> > Cc: celestine preetham ; discuss@xxxxxxxxxxxxx > >> >> >> > Sent: Sun, 20 December, 2009 9:37:29 PM > >> >> >> > Subject: Re: celestine , India , 2.6.24-24generic > >> >> >> > > >> >> >> > Celestine, > >> >> >> > > >> >> >> > The dkms support was not yet established under the 2.6.24 kernels. > >> >> >> > So after installation of agrsm048pci-2.1.60_20091022_i386.deb > with: > >> >> >> > $ sudo dpkg -i agrsm*.deb > >> >> >> > the subsequent compile must be done manually > >> >> >> > The source code package will be written to > /usr/src/agrsm048pci-2.1.60/ > >> >> >> > Do > >> >> >> > $ cd /usr/src/agrsm048pci-2.1.60 > >> >> >> > Look around > >> >> >> > $ ls > >> >> >> > $ sudo make clean > >> >> >> > $ sudo make all > >> >> >> > $ sudo make install > >> >> >> > > >> >> >> > Antonio, the dkms-agrsm_2.1.80 packages do NOT support this modem. > >> >> >> > It is necessary to use the older 2.1.60 code, for reasons obscure. > >> >> >> > Joshua Crawford has tested extensively. > >> >> >> > > >> >> >> > Report back as help is needed .\ > >> >> >> > > >> >> >> > MarvS > >> >> >> > scanModem maintainer > >> >> >> > > >> >> >> > > >> >> >> > On Sun, Dec 20, 2009 at 8:48 AM, Antonio Olivares > >> >> >> > wrote: > >> >> >> > > Celestine, > >> >> >> > > > >> >> >> > > scanModem recommends agrsm modem driver: > >> >> >> > > > >> >> >> > > 11c1:048c and 11c1:048f > >> >> >> > > 2.6.29 agrsm048pci-2.1.60_20091022_i386.deb or > >> >> >> > > agrsm048pci-2.1.60_20091022.tar.gz > >> >> >> > > > >> >> >> > > You may get the deb file since you are under Ubuntu and if you can > >> >> >> > > install the dkms package. > >> >> >> > > > >> >> >> > > NOTE: > >> >> >> > > > >> >> >> > > >> >> >> > >> >> > >> > http://linmodems.technion.ac.il/packages/ltmodem/11c11040/agrsm048pci-2.1.60_20090905_i386.deb > >> >> >> > > exists but the 1022_i386 deb package is not there only tar.gz > >> >> >> > > > >> >> >> > > > >> >> >> > > >> >> >> > >> >> > >> > http://linmodems.technion.ac.il/packages/ltmodem/11c11040/agrsm048pci-2.1.60_20091022.tar.gz > >> >> >> > > > >> >> >> > > As for dkms package there are two? > >> >> >> > > > >> >> >> > > > >> >> >> > > >> >> >> > >> >> > >> > http://linmodems.technion.ac.il/packages/ltmodem/11c11040/dkms-agrsm_2.1.80-6_i386.deb > >> >> >> > > > >> >> >> > > >> >> >> > >> >> > >> > http://linmodems.technion.ac.il/packages/ltmodem/11c11040/dkms-agrsm_2.1.80-7_i386.deb > >> >> >> > > > >> >> >> > > Which of the two should Celestine install? The newer one is the > >> >> >> > > -7_i386 one, maybe this one should be installed? > >> >> >> > > > >> >> >> > > Once downloaded and transferred into a Linux partition, > >> >> >> > > the packages can be installed alltogether with: > >> >> >> > > $ sudo dpkg -i *.deb > >> >> >> > > > >> >> >> > > Here's scanModem output/recommendations: > >> >> >> > > ====================================== > >> >> >> > > > >> >> >> > > Predictive diagnostics for card in bus 02:02.0: > >> >> >> > > Modem chipset detected on > >> >> >> > > NAME="Communication controller: Agere Systems V.92 56K WinModem " > >> >> >> > > CLASS=0780 > >> >> >> > > PCIDEV=11c1:048c > >> >> >> > > SUBSYS=11c1:044c > >> >> >> > > IRQ=11 > >> >> >> > > IDENT=agrsm > >> >> >> > > > >> >> >> > > For candidate modem in: 02:02.0 > >> >> >> > > 0780 Communication controller: Agere Systems V.92 56K WinModem > >> >> >> > > Primary device ID: 11c1:048c > >> >> >> > > Support type needed or chipset: agrsm > >> >> >> > > > >> >> >> > > > >> >> >> > > > >> >> >> > > The AgereSystems/LSI agrsm code supports compiling of a agrmodem + > >> >> >> > > agrserial driver pair. > >> >> >> > > There are a few different chipsets which use this driver pair, but > >> >> >> > > they use different code resources: > >> >> >> > > Chipsets KV* PackageNames (most current > as > >> >> >> > > of > >> >> >> > November 2009) > >> >> >> > > > >> >> >> > > >> >> >> > >> >> > >> > ---------------------------------------------------------------------------------------------- > >> >> >> > > 11c1:048c and 11c1:048f > >> >> >> > > 2.6.29 agrsm048pci-2.1.60_20091022_i386.deb or > >> >> >> > > agrsm048pci-2.1.60_20091022.tar.gz > >> >> >> > > 11c1:0620 2.6.28 > >> >> >> > > agrsm06pci_2.1.80~20090825_i386.deb or > >> >> >> > > agrsm06pci_2.1.80~20090825_i386.tar.gz > >> >> >> > > 11c11040 (on HDA audio cards) 2.6.31 agrsm-2.6.30.tar.bz2 !! > >> >> >> > > All available at: > >> >> >> > > http://linmodems.technion.ac.il/packages/ltmodem/11c11040/ , > whereat > >> >> >> > > additionally > >> >> >> > > automation & testing agrsm-tools_0.0.1_all.deb > or > >> >> >> > > agrsm-tools-0.0.1-2.noarch.rpm > >> >> >> > > General background agrsm_howto.txt > >> >> >> > > for rpm variants of dkms-agrsm , see > >> >> >> > http://linux.zsolttech.com/linmodem/agrsm/ > >> >> >> > > > >> >> >> > > >> >> >> > >> >> > >> > ------------------------------------------------------------------------------------------------ > >> >> >> > > * KV == latest kernel release with a reported success > >> >> >> > > !! Latest update with major credit to Nikolay Zhuravlev > >> >> >> > > Report from Bjorn Wielens: > >> >> >> > > Please note- trying to load the modules on a OpenSuSE 11.2 system > >> >> >> > > gives > >> >> >> > > an error about the module_version symbol. Using: > >> >> >> > > # modprobe --force agrmodem > >> >> >> > > # modprobe --force agrserial > >> >> >> > > is necessary to load the drivers, and does not appear to cause ill > >> >> >> > > effects. > >> >> >> > > > >> >> >> > > > >> >> >> > > All of the above packages are dkms competent. This means that if > your > >> >> >> > > Linux distros dkms package > >> >> >> > > is previously installed, if provides for future updates matching > >> >> >> > > forthcoming kernels. > >> >> >> > > > >> >> >> > > > >> >> >> > > Regards, > >> >> >> > > > >> >> >> > > Antonio > >> >> >> > > > >> >> >> > > On 12/20/09, celestine preetham wrote: > >> >> >> > >> Help required on how to proceed for ubuntu 8.04.3 LTS > >> >> >> > >> Thanks in advance > >> >> >> > >> > >> >> >> > >> PS. ModemData.txt attached > >> >> >> > >> > >> >> >> > > > >> >> >> > >> >> >> > >> >> >> > >> >> >> The INTERNET now has a personality. YOURS! See your Yahoo! > Homepage. > >> >> >> > >> >> >> http://in.yahoo.com/ > >> >> > > >> >> > > >> >> > > >> >> > The INTERNET now has a personality. YOURS! See your Yahoo! > Homepage. > >> >> > http://in.yahoo.com/ > >> > > >> > > >> > > >> > The INTERNET now has a personality. YOURS! See your Yahoo! Homepage. > >> http://in.yahoo.com/ > > > > > > The INTERNET now has a personality. YOURS! See your Yahoo! Homepage. > http://in.yahoo.com/ > > > > > > -- > Joshua Crawford ... http://geocities.com/mortarn > > http://www.rewardscentral.com.au/Join/Default.aspx?refer=mortarn > Be rewarded! Join RewardsCentral today! The INTERNET now has a personality. YOURS! See your Yahoo! Homepage. http://in.yahoo.com/
