I am having AMD64 bit system but all my software are 32bit , will it create problems ? @Marvin I got a dependency error for libc6-dev (as libc6) . So I tried installing libc6 but it does'nt install and displays that a higher version of this has already been installed. I tried running 'make all' after installing linux-libc-dev alone but it returned the same errors ( missing of .h files ) @ Joshua I tried using agrsm-20080203 and typed below the terminal display as executed . I ve got a lot of ' warnings' and the program output steps seem shorter than the ones present in the cogent message http://linmodems.technion.ac.il/bigarch/archive-seventh/msg00849.html . Is it installing properly ? celestine@localhost:~/Desktop/agrsm$ make clean rm -fR agrsoftmodem.o serial26.o \ serial26.o \ agrsm_core.o \ agrmodem.{o,ko,mod.{c,o}} \ agrserial.{o,ko,mod.{c,o}} \ .*.cmd .tmp_versions celestine@localhost:~/Desktop/agrsm$ make make -C /lib/modules/2.6.24-24-generic/build SUBDIRS=/home/celestine/Desktop/agrsm modules \make[1]: Entering directory `/usr/src/linux-headers-2.6.24-24-generic' CC [M] /home/celestine/Desktop/agrsm/agrsoftmodem.o objcopy --weaken-symbol=LXHardwareInfoCreate \ --weaken-symbol=LXHardwareInfoDestroy \ /home/celestine/Desktop/agrsm/agrmodemlib.o /home/celestine/Desktop/agrsm/agrsm_core.o CC [M] /home/celestine/Desktop/agrsm/lib.o CC [M] /home/celestine/Desktop/agrsm/serial26.o /home/celestine/Desktop/agrsm/serial26.c: In function ‘serial8250_get_mctrl’: /home/celestine/Desktop/agrsm/serial26.c:1371: warning: unused variable ‘flags’ /home/celestine/Desktop/agrsm/serial26.c: In function ‘serial8250_config_port’: /home/celestine/Desktop/agrsm/serial26.c:2039: warning: unused variable ‘ret’ /home/celestine/Desktop/agrsm/serial26.c: At top level: /home/celestine/Desktop/agrsm/serial26.c:2131: warning: initialization from incompatible pointer type /home/celestine/Desktop/agrsm/serial26.c:2132: warning: initialization from incompatible pointer type /home/celestine/Desktop/agrsm/serial26.c:1922: warning: ‘serial8250_request_rsa_resource’ defined but not used LD [M] /home/celestine/Desktop/agrsm/agrmodem.o LD [M] /home/celestine/Desktop/agrsm/agrserial.o Building modules, stage 2. MODPOST 2 modules WARNING: could not find /home/celestine/Desktop/agrsm/.agrsm_core.o.cmd for /home/celestine/Desktop/agrsm/agrsm_core.o CC /home/celestine/Desktop/agrsm/agrmodem.mod.o LD [M] /home/celestine/Desktop/agrsm/agrmodem.ko CC /home/celestine/Desktop/agrsm/agrserial.mod.o LD [M] /home/celestine/Desktop/agrsm/agrserial.ko make[1]: Leaving directory `/usr/src/linux-headers-2.6.24-24-generic' celestine@localhost:~/Desktop/agrsm$ sudo make install sudo: unable to resolve host localhost [sudo] password for celestine: make -C /lib/modules/2.6.24-24-generic/build M="/home/celestine/Desktop/agrsm" modules_install make[1]: Entering directory `/usr/src/linux-headers-2.6.24-24-generic' INSTALL /home/celestine/Desktop/agrsm/agrmodem.ko INSTALL /home/celestine/Desktop/agrsm/agrserial.ko DEPMOD 2.6.24.6 make[1]: Leaving directory `/usr/src/linux-headers-2.6.24-24-generic' if ! /sbin/modprobe -nq agrmodem.ko ; then /sbin/depmod -a; fi celestine@localhost:~/Desktop/agrsm$ sudo modprobe agrmodem sudo: unable to resolve host localhost celestine@localhost:~/Desktop/agrsm$ sudo modprobe agrserial sudo: unable to resolve host localhost celestine@localhost:~/Desktop/agrsm$ sudo wvdialconff sudo: unable to resolve host localhost sudo: wvdialconff: command not found celestine@localhost:~/Desktop/agrsm$ sudo wvdialconf sudo: unable to resolve host localhost Editing `/etc/wvdial.conf'. Scanning your serial ports for a modem. Modem Port Scan<*1>: S0 S1 S2 S3 ttySAGR<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud ttySAGR<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud ttySAGR<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. Sorry, no modem was detected! Is it in use by another program? Did you configure it properly with setserial? Please read the FAQ at http://open.nit.ca/wiki/?WvDial If you still have problems, send mail to <wvdial-list@xxxxxxxxxxxx>. celestine@localhost:~/Desktop/agrsm$ Celestine Preetham > > Celestine, > > Copy future exchanges to Joshua, who is the expert on these 11c1:048c/f modems > > RE: scripts/basic/fixdep.c:107:23: error: sys/types.h: No such file or directory > scripts/basic/fixdep.c:108:22: error: sys/stat.h: No such file or directory > scripts/basic/fixdep.c:109:22: error: sys/mman.h: No such file or directory > scripts/basic/fixdep.c:110:20: error: unistd.h: No such file or directory > scripts/basic/fixdep.c:111:19: error: fcntl.h: No such file or directory > scripts/basic/fixdep.c:112:20: error: string.h: No such file or directory > scripts/basic/fixdep.c:113:20: error: stdlib.h: No such file or directory > scripts/basic/fixdep.c:114:19: error: stdio.h: No such file or directory > ---------- > > These *.h files will be provideI d by the files linux-libc-dev and > libc6-dev packages > Install them and again try the compiles. Start at > http://packages.ubuntu.com/hardy/libc6-dev > More probably, practice using the search engines at > http://packages.ubuntu.com, as you will likely need then in the > future. > > Until there is a successfull detection of the modem by > $ sudo wdialconf > none of the dialout tools will be successful > > On Sun, Dec 20, 2009 at 2:18 PM, celestine preetham > wrote: > > Yes I tried using the symbolic links as given the agrsm how tos between SAGR , > AGS3 and modem but when I type pon on terminal , It says /dev/modem is > unrecognised (something similar) > > > > PS. have attached the error file I mentioned in my previous mail (sorry for > the mixup) > >> Celestine, > >> > >> On 12/20/09, celestine preetham wrote: > >> >> Thanks Antonio and Marvin for your support. > >> >> But I am facing some errors after " sudo make all " that I have attached > >> >> . > >> >> Also I tried installing tarball for agrsm-20090418 but it returned errors > >> >> . > >> >> But when I tried installing tarball agrsm-20070804 , there were no errors > >> >> So should I consider using the older versions ? > >> > > >> If it works, why not? > >> Try it out, edit /etc/wvdial.conf and select /dev/modem as the modem > >> port, remember to make symbolic links > >> $ sudo ln -s /dev/ttyAG3 /dev/modem > >> or similar as provided in instructions, README/INSTALL and attempt a dialout. > >> >> After installing tarbal agrsm-20070804 , wvdial.conf did not identify any > >> >> modem > >> > > >> Try the above, i.e, dialout with wvdial with the /dev/modem as the > >> port after making symbolic links and see if it connects? > >> > >> Let us know how it goes. > >> > >> Regards, > >> > >> Antonio > >> >> I also tried the pci=noacpi bootup but in vain > >> >> > >> >> Thanks, > >> >> Celestine Preetham > >> >> > >> >> > >> >> > >> >> ----- Original Message ---- > >> >> > From: Marvin Stodolsky > >> >> > To: Antonio Olivares > >> >> > Cc: celestine preetham ; discuss@xxxxxxxxxxxxx > >> >> > Sent: Sun, 20 December, 2009 9:37:29 PM > >> >> > Subject: Re: celestine , India , 2.6.24-24generic > >> >> > > >> >> > Celestine, > >> >> > > >> >> > The dkms support was not yet established under the 2.6.24 kernels. > >> >> > So after installation of agrsm048pci-2.1.60_20091022_i386.deb with: > >> >> > $ sudo dpkg -i agrsm*.deb > >> >> > the subsequent compile must be done manually > >> >> > The source code package will be written to /usr/src/agrsm048pci-2.1.60/ > >> >> > Do > >> >> > $ cd /usr/src/agrsm048pci-2.1.60 > >> >> > Look around > >> >> > $ ls > >> >> > $ sudo make clean > >> >> > $ sudo make all > >> >> > $ sudo make install > >> >> > > >> >> > Antonio, the dkms-agrsm_2.1.80 packages do NOT support this modem. > >> >> > It is necessary to use the older 2.1.60 code, for reasons obscure. > >> >> > Joshua Crawford has tested extensively. > >> >> > > >> >> > Report back as help is needed .\ > >> >> > > >> >> > MarvS > >> >> > scanModem maintainer > >> >> > > >> >> > > >> >> > On Sun, Dec 20, 2009 at 8:48 AM, Antonio Olivares > >> >> > wrote: > >> >> > > Celestine, > >> >> > > > >> >> > > scanModem recommends agrsm modem driver: > >> >> > > > >> >> > > 11c1:048c and 11c1:048f > >> >> > > 2.6.29 agrsm048pci-2.1.60_20091022_i386.deb or > >> >> > > agrsm048pci-2.1.60_20091022.tar.gz > >> >> > > > >> >> > > You may get the deb file since you are under Ubuntu and if you can > >> >> > > install the dkms package. > >> >> > > > >> >> > > NOTE: > >> >> > > > >> >> > > >> >> > >> > http://linmodems.technion.ac.il/packages/ltmodem/11c11040/agrsm048pci-2.1.60_20090905_i386.deb > >> >> > > exists but the 1022_i386 deb package is not there only tar.gz > >> >> > > > >> >> > > > >> >> > > >> >> > >> > http://linmodems.technion.ac.il/packages/ltmodem/11c11040/agrsm048pci-2.1.60_20091022.tar.gz > >> >> > > > >> >> > > As for dkms package there are two? > >> >> > > > >> >> > > > >> >> > > >> >> > >> > http://linmodems.technion.ac.il/packages/ltmodem/11c11040/dkms-agrsm_2.1.80-6_i386.deb > >> >> > > > >> >> > > >> >> > >> > http://linmodems.technion.ac.il/packages/ltmodem/11c11040/dkms-agrsm_2.1.80-7_i386.deb > >> >> > > > >> >> > > Which of the two should Celestine install? The newer one is the > >> >> > > -7_i386 one, maybe this one should be installed? > >> >> > > > >> >> > > Once downloaded and transferred into a Linux partition, > >> >> > > the packages can be installed alltogether with: > >> >> > > $ sudo dpkg -i *.deb > >> >> > > > >> >> > > Here's scanModem output/recommendations: > >> >> > > ====================================== > >> >> > > > >> >> > > Predictive diagnostics for card in bus 02:02.0: > >> >> > > Modem chipset detected on > >> >> > > NAME="Communication controller: Agere Systems V.92 56K WinModem " > >> >> > > CLASS=0780 > >> >> > > PCIDEV=11c1:048c > >> >> > > SUBSYS=11c1:044c > >> >> > > IRQ=11 > >> >> > > IDENT=agrsm > >> >> > > > >> >> > > For candidate modem in: 02:02.0 > >> >> > > 0780 Communication controller: Agere Systems V.92 56K WinModem > >> >> > > Primary device ID: 11c1:048c > >> >> > > Support type needed or chipset: agrsm > >> >> > > > >> >> > > > >> >> > > > >> >> > > The AgereSystems/LSI agrsm code supports compiling of a agrmodem + > >> >> > > agrserial driver pair. > >> >> > > There are a few different chipsets which use this driver pair, but > >> >> > > they use different code resources: > >> >> > > Chipsets KV* PackageNames (most current as > >> >> > > of > >> >> > November 2009) > >> >> > > > >> >> > > >> >> > >> > ---------------------------------------------------------------------------------------------- > >> >> > > 11c1:048c and 11c1:048f > >> >> > > 2.6.29 agrsm048pci-2.1.60_20091022_i386.deb or > >> >> > > agrsm048pci-2.1.60_20091022.tar.gz > >> >> > > 11c1:0620 2.6.28 > >> >> > > agrsm06pci_2.1.80~20090825_i386.deb or > >> >> > > agrsm06pci_2.1.80~20090825_i386.tar.gz > >> >> > > 11c11040 (on HDA audio cards) 2.6.31 agrsm-2.6.30.tar.bz2 !! > >> >> > > All available at: > >> >> > > http://linmodems.technion.ac.il/packages/ltmodem/11c11040/ , whereat > >> >> > > additionally > >> >> > > automation & testing agrsm-tools_0.0.1_all.deb or > >> >> > > agrsm-tools-0.0.1-2.noarch.rpm > >> >> > > General background agrsm_howto.txt > >> >> > > for rpm variants of dkms-agrsm , see > >> >> > http://linux.zsolttech.com/linmodem/agrsm/ > >> >> > > > >> >> > > >> >> > >> > ------------------------------------------------------------------------------------------------ > >> >> > > * KV == latest kernel release with a reported success > >> >> > > !! Latest update with major credit to Nikolay Zhuravlev > >> >> > > Report from Bjorn Wielens: > >> >> > > Please note- trying to load the modules on a OpenSuSE 11.2 system > >> >> > > gives > >> >> > > an error about the module_version symbol. Using: > >> >> > > # modprobe --force agrmodem > >> >> > > # modprobe --force agrserial > >> >> > > is necessary to load the drivers, and does not appear to cause ill > >> >> > > effects. > >> >> > > > >> >> > > > >> >> > > All of the above packages are dkms competent. This means that if your > >> >> > > Linux distros dkms package > >> >> > > is previously installed, if provides for future updates matching > >> >> > > forthcoming kernels. > >> >> > > > >> >> > > > >> >> > > Regards, > >> >> > > > >> >> > > Antonio > >> >> > > > >> >> > > On 12/20/09, celestine preetham wrote: > >> >> > >> Help required on how to proceed for ubuntu 8.04.3 LTS > >> >> > >> Thanks in advance > >> >> > >> > >> >> > >> PS. ModemData.txt attached > >> >> > >> > >> >> > > > >> >> > >> >> > >> >> > >> >> The INTERNET now has a personality. YOURS! See your Yahoo! Homepage. > >> >> > >> >> http://in.yahoo.com/ > >> > > >> > > >> > > >> > The INTERNET now has a personality. YOURS! See your Yahoo! Homepage. > >> > http://in.yahoo.com/ > > > > > > > > The INTERNET now has a personality. YOURS! See your Yahoo! Homepage. > http://in.yahoo.com/ The INTERNET now has a personality. YOURS! See your Yahoo! Homepage. http://in.yahoo.com/
