Antonio, scanModem is OK. It is just that the combination of Primary device ID: 1002:437b Subsystem PCI_id 1179:ff00 hosting a 11c11040 chip has not been encountered before. Hence it is not output from the archives. Hugo, Sadly support is lacking for 11c11040 modem chip for kernels since 2.6.27. We have informed the LSI/Agere maintainer of this problem, but they never report when they will provide and update. Read InfoGeneral.txt about alternate modem hardware if you are fully dependent upon the modem for Internet access. MarvS scanModem maintainer On Sun, Nov 29, 2009 at 10:34 PM, Antonio Olivares <olivares14031@xxxxxxxxx> wrote: > Hugo, > > From your windows output: > > ID hardware:HDAUDIO\FUNC_02&VEN_11C1&DEV_1040&SUBSYS_11790001&REV_1002 > > This refers to 11c1:1040 chipset which is currently not working for > kernels > = 2.6.27 :( > > I try to run scanModem fake with the same information that you have > provided I get same results ? > > > http://linmodems.technion.ac.il/packages/ltmodem/11c11040/ > > Marv, > > can their be a mistake somewhere? > > For candidate modem in: fake > FakeClass FakeName > Primary device ID: 1002:437b > Subsystem PCI_id 1179:ff00 > Softmodem codec or chipset from diagnostics: > from Archives: > > > > Support type needed or chipset: > > Support can likely be achieved through two mutually exclusive alternatives: > 1) The hsfmodem software for Conexant chipset modems: Read DOCs/Conexant.txt > The following ALSA alternative CANNOT work with Conexant modems. > > 2) An ALSA modem driver plus slmodemd. Read DOCs/Smartlink.txt for details, and > to test get the package SLMODEMD.gcc4.4.tar.gz from: > http://linmodems.technion.ac.il/packages/smartlink/ > > > For owners of a Dell PCs with Conexant HSF modems, a driver source package with > full speed enabled is available, but requires driver compiling. Read DOCs/Conexa > nt.txt > > Start at http://www.linuxant.com/drivers/hsf/full for > eventually download of a hsfmodem-7.68.00.12full_k.???.zip package > with ??? the package type (deb, rpm, tar etc) > These packages have compiled drivers but will also compile a driver, > if there is a mismatch between the resident kernel and provided driver. > The generic hsfmodem-7.68.00.12full.tar.gz package only provides compiling supp > ort > > > Start at http://www.linuxant.com/drivers/hsf/downloads-license.php to find the > hsfmodem package matching your System. For several Linux distros, there are > precompiled drivers matched to specific kernels. These have within the FileName, > your KernelVersion: 2.6.31.5_127.fc12.i686.PAE > They can be found through http://www.linuxant.com/drivers/hsf/full/downloads.php > > A more precise location may be given a few paragraphs below. > If an EXACT Match with your your KernelVersion is not found, one of the > "Generic packages with source" near the bottom of the page must be used. > Downloaded packages must be moved into the Linux partition (home folder is OK) > and unzipped with: > unzip hsf*.zip > The installation command for a .deb suffic packages is, with root/adm permission > : > dpkg -i hsf*.deb > while for .rpm suffix it is, with: > rpm -i hsf*.rpm > > Support for Conexant chips hosted on High Definition Audio cards may require > installation of additional packages, one of the alsa-driver-linuxant packages > on http://www.linuxant.com/alsa-driver/ At the same time download the > alsa-driver-1.0.17-1.patch , in case it prove to be later needed. During the > hsfmodem install, there will be a message if there is necessary installation of > alsa-driver-linuxant > > The installation command for a .deb suffic packages is, with root/adm permission > : > dpkg -i hsf*.deb > while for .rpm suffix it is, with: > rpm -i hsf*.rpm > > There may a message that "Dependencies" are not satisfied. In this case the Ubu > ntu/Debian packages to be installed are linux-libc-dev & libc6-dev. Package > names may be different for other Linuxes. If not on your install CD, these > packages can be searched for at http://packages.ubuntu.com. After download, > they can be coinstalled with: > dpkg -i li*.deb > Again try the alsa-driver-linuxant > > There may be a message that the patch must be applied. In this case get the > ftp://ftp.alsa-project.org/pub/driver/alsa-driver-1.0.17.tar.bz2 > Under Linux, this package is unpacked with: > $ tar jxf alsa*.tar.bz2 > Next the patch is applied with: > $ patch -p0 < alsa-driver-1.0.17-1.patch > > See http://linmodems.technion.ac.il/bigarch/archive-eighth/msg00838.html > for details on compiling and installing replacement snd-hda-intel + its > dependent drivers. > After the installation is completed, rerun the hsfmodem installation. > Reboot and try to detect the modem with Root permission: > wvdialconf /etc/wvdial.conf > > Read DOCs/Conexant.txt > > Hugo, > > Don't try anything yet, let's wait a bit for Marv's guidance. > > > Regards, > > Antonio > > On 11/29/09, hugo ferrandes <hugoferrandes@xxxxxxxx> wrote: >> Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List >> Server, >> >> as HTML can contain viruses. Use as the email Subject Line: >> >> YourName, YourCountry kernel 2.6.31-14-generic >> >> With this Subject Line cogent experts will be alerted, and useful case >> names left in the Archive. >> >> YourCountry will enable Country specific guidance. Linux experts in >> YourCountry >> >> can be found through: http://www.linux.org/groups/index.html. >> >> They will know your Country's modem code, which may be essential for >> dialup service. >> >> Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an >> Internet Provider mail filters. >> >> So in a day, also check the Archived responses at http://www.linmodems.org >> >> -------------------------- System information ---------------------------- >> >> CPU=i686, >> >> Linux version 2.6.31-14-generic (buildd@rothera) (gcc version 4.4.1 >> (Ubuntu 4.4.1-4ubuntu8) ) #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009 >> >> scanModem update of: 2009_11_14 >> >> >> >> The dialer utility package WVDIAL does not appear to be installed on >> your System. >> >> For Ubuntu Jaunty users, there are at the bottom of >> http://linmodems.technion.ac.il/packages/: >> >> wvdial_jaunty_amd64.zip for x86_64, 64 bit bus systems. >> >> wvdial_jaunty_i386.zip for 32 bit systems. >> >> These are about 1 MB in size. After downloaded and copied into your >> Linux partition: >> >> $ unzip wv*.zip >> >> Within the new folder: >> >> $ sudo dpkg -i *.deb >> >> will complete the wvdial installation >> >> Please read Modem/DOCs/wvdial.txt for usage information. >> >> >> >> Presently install your Linux Distributions dkms package. It provides for >> automated driver updates, >> >> following upgrade of your kernel. For details see >> http://linux.dell.com/projects.shtml#dkms >> >> >> >> There are no blacklisted modem drivers in /etc/modprobe* files >> >> >> >> Potentially useful modem drivers now loaded are: >> >> snd_hda_intel >> >> >> >> Attached USB devices are: >> >> ID 067b:2517 Prolific Technology, Inc. Flash Disk Mass Storage Device >> >> ID 067b:2515 Prolific Technology, Inc. Flash Disk Embedded Hub >> >> ID 046d:c00e Logitech, Inc. M-BJ58/M-BJ69 Optical Wheel Mouse >> >> If a cellphone is not detected, see >> http://ubuntuforums.org/archive/index.php/t-878554.html >> >> A sample report is: >> http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html >> >> >> >> If a USB modem or cellphone is attached and was not detected, please >> >> provide available information in your request to discuss@xxxxxxxxxxxxx >> >> >> >> For candidate card in slot 00:14.2, firmware information and bootup >> diagnostics are: >> >> PCI slot PCI ID SubsystemID Name >> >> ---------- --------- --------- -------------- >> >> 00:14.2 1002:437b 1179:ff00 Audio device: ATI Technologies Inc >> IXP SB4x0 High Definition Audio Controller >> >> >> >> Modem interrupt assignment and sharing: >> >> 16: 273 IO-APIC-fasteoi ohci1394, HDA Intel >> >> --- Bootup diagnostics for card in PCI slot 00:14.2 ---- >> >> [ 0.139248] pci 0000:00:14.2: reg 10 64bit mmio: [0xd0500000-0xd0503fff] >> >> [ 0.139330] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold >> >> [ 0.139337] pci 0000:00:14.2: PME# disabled >> >> [ 16.388417] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) >> -> IRQ 16 >> >> >> >> The PCI slot 00:14.2 of the modem card may be disabled early in >> >> a bootup process, but then enabled later. If modem drivers load >> >> but the modem is not responsive, read DOCs/Bootup.txt about possible >> fixes. >> >> Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx >> >> if help is needed. >> >> >> >> >> >> >> >> ===== Advanced Linux Sound Architecture (ALSA) diagnostics ===== >> >> The ALSA packages provide audio support and also drivers for some modems. >> >> ALSA diagnostics are written during bootup to /proc/asound/ folders. >> >> >> >> The ALSA verion is 1.0.20 >> >> The modem cards detected by "aplay -l" are: None >> >> >> >> >> >> The /proc/asound/pcm file reports: >> >> ----------------------- >> >> >> >> >> >> about /proc/asound/cards: >> >> ------------------------ >> >> 0 [SB ]: HDA-Intel - HDA ATI SB >> >> HDA ATI SB at 0xd0500000 irq 16 >> >> >> >> PCI slot 00:14.2 has a High Definition Audio Card >> >> The drivers are in the kernel modules tree at: >> >> /lib/modules/2.6.31-14-generic/kernel/sound/pci/hda/snd-hda-intel.ko >> >> UNEXPECTED HDA diagnostic outcome. >> >> === Finished firmware and bootup diagnostics, next deducing cogent >> software. === >> >> >> >> A candidate modem is not evident among the PCI devices: >> >> ------------------------------------------------ >> >> 00:12.0 IDE interface: ATI Technologies Inc IXP SB400 Serial ATA >> Controller (rev 80) >> >> 00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 82) >> >> 00:14.1 IDE interface: ATI Technologies Inc IXP SB400 IDE Controller >> (rev 80) >> >> 00:14.2 Audio device: ATI Technologies Inc IXP SB4x0 High Definition >> Audio Controller (rev 01) >> >> 01:05.0 VGA compatible controller: ATI Technologies Inc RC410 [Radeon >> Xpress 200M] >> >> 02:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless >> Network Adapter (rev 01) >> >> 09:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306 Fire II IEEE >> 1394 OHCI Link Layer Controller (rev c0) >> >> 09:06.0 Ethernet controller: Realtek Semiconductor Co., Ltd. >> RTL-8139/8139C/8139C+ (rev 10) >> >> ------------------------------------------------ >> >> with USB and bridge devices not displayed. >> >> >> >> If your modem is connected by an external serial cable, >> >> or mounted internally on an ISA card, scanModem would not access it. >> >> Try with Root permission >> >> $ sudo wvdialconf /etc/wvdial.conf >> >> to detect these modem types and some USB modems. >> >> If the detection is successful, read the DOCs/wvdial.txt . >> >> Edit the /etc/wvdial.conf with Root permission: >> >> sudo gedit /etc/wvdial.conf >> >> will be able to dial out with Root permission: >> >> sudo wvdial >> >> >> >> Many modems for which scanModem fails have Conexant chips. >> >> From http://www.linuxant.com/drivers/modemident.php >> >> get the ListModem tool, which will report on Conexant chipset modems >> >> >> >> If the above tests fail, please provide any independent information >> available on your modem. >> >> If an alternative boot into Microsoft windows can be done, do mouse >> >> clicks on: >> >> Start > Settings > Control Panel > Classical View (for Window XP) > >> System >> >> > Hardware > Device Manager > Modems > Click on the + > Modem. Double >> click to >> >> expand the graphic. Manufacturer information may be displayed. For >> example, CXT >> >> stands for Conexant. Click the Diagnostics Tab. Record any hardware ID >> or vendor >> >> and device information. From the Driver Details TAB, copy out the VENdor >> and DEVice information. >> >> Next do the Query Modem and record the ATI specifications displayed such as: >> >> ATI3 - Agere SoftModem Version 2.1.22 >> >> ATI5 - 2.1.22, AMR Intel MB, AC97 ID:SIL REV:0x27 >> >> Try to identify the modem setup file, with name perhaps MODEM.INF. >> >> If may contain chipset Vendor informaton. >> >> >> >> >> >> Predictive diagnostics for card in bus 00:14.2: >> >> Modem chipset not detected on >> >> NAME="Audio device: ATI Technologies Inc IXP SB4x0 High Definition Audio >> Controller " >> >> CLASS=0403 >> >> PCIDEV=1002:437b >> >> SUBSYS=1179:ff00 >> >> IRQ=16 >> >> HDA=1002:437b >> >> SOFT=1002:437b.HDA >> >> >> >> >> >> High Definition Audio (HDA) cards MAY host a modem chip in their >> Subsystem, >> >> and many are supported by the ALSA audio+modem driver snd-hda-intel >> >> A modem was not detected on HDA card 1002:437b. >> >> If another modem card is present, then most likely 1002:437b does not >> host a modem. >> >> If another modem card has not been detected, then possibilities are: >> >> 1) A Conexant modem chip is present on 1002:437b, as Conexant chips >> >> are frequently not detectable by ALSA diagnostics >> >> 2) The modem may be of the older non-PCI Controller Chipset >> (hardware) type. >> >> Try detection with Root permission: >> >> sudo wvdialconf /etc/wvdial.conf >> >> >> >> For candidate modem in: 00:14.2 >> >> 0403 Audio device: ATI Technologies Inc IXP SB4x0 High Definition >> Audio Controller >> >> Primary device ID: 1002:437b >> >> Subsystem PCI_id 1179:ff00 >> >> Softmodem codec or chipset from diagnostics: >> >> from Archives: >> >> >> >> >> >> >> >> Support type needed or chipset: >> >> >> >> Support can likely be achieved through two mutually exclusive alternatives: >> >> 1) The hsfmodem software for Conexant chipset modems: Read DOCs/Conexant.txt >> >> The following ALSA alternative CANNOT work with Conexant modems. >> >> >> >> 2) An ALSA modem driver plus slmodemd. Read DOCs/Smartlink.txt for >> details, and >> >> to test get the package SLMODEMD.gcc4.4.tar.gz from: >> >> http://linmodems.technion.ac.il/packages/smartlink/ >> >> >> >> >> >> For owners of a Dell PCs with Conexant HSF modems, a driver source >> package with full speed enabled is available, but requires driver >> compiling. Read DOCs/Conexant.txt >> >> >> >> From http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php >> >> download hsfmodem-7.80.02.02full_k2.6.31_14_generic_ubuntu_i386.deb.zip >> >> Under Linux unpack with: >> >> $ unzip hsfmodem*.zip >> >> Then install with: >> >> $ sudo dpkg -i hsfmodem*.deb >> >> Subsequently, the modem should be found with >> >> $ sudo wvdialconf /etc/wvdial.conf >> >> Edit in your personal information with: >> >> $ sudo gedit /etc/wvdial.conf >> >> and try dialing out with: >> >> $ sudo wvdial. >> >> See DOCs/Testing.txt for details. >> >> >> >> The directions following below need only be pursued, if the above >> procedures are not adequate. >> >> >> >> Start at http://www.linuxant.com/drivers/hsf/downloads-license.php to >> find the >> >> hsfmodem package matching your System. For several Linux distros, there are >> >> precompiled drivers matched to specific kernels. These have within the >> FileName, >> >> your KernelVersion: 2.6.31_14_generic >> >> They can be found through >> http://www.linuxant.com/drivers/hsf/full/downloads.php >> >> A more precise location may be given a few paragraphs below. >> >> If an EXACT Match with your your KernelVersion is not found, one of the >> >> "Generic packages with source" near the bottom of the page must be used. >> >> Downloaded packages must be moved into the Linux partition (home folder >> is OK) >> >> and unzipped with: >> >> unzip hsf*.zip >> >> The installation command for a .deb suffic packages is, with root/adm >> permission: >> >> sudo dpkg -i hsf*.deb >> >> while for .rpm suffix it is, with: >> >> rpm -i hsf*.rpm >> >> >> >> Support for Conexant chips hosted on High Definition Audio cards may require >> >> installation of additional packages, one of the alsa-driver-linuxant >> packages >> >> on http://www.linuxant.com/alsa-driver/ At the same time download the >> >> alsa-driver-1.0.17-1.patch , in case it prove to be later needed. During the >> >> hsfmodem install, there will be a message if there is necessary >> installation of >> >> alsa-driver-linuxant >> >> >> >> The installation command for a .deb suffic packages is, with root/adm >> permission: >> >> sudo dpkg -i hsf*.deb >> >> while for .rpm suffix it is, with: >> >> rpm -i hsf*.rpm >> >> >> >> There may a message that "Dependencies" are not satisfied. In this case >> the Ubuntu/Debian packages to be installed are linux-libc-dev & >> libc6-dev. Package >> >> names may be different for other Linuxes. If not on your install CD, these >> >> packages can be searched for at http://packages.ubuntu.com. After download, >> >> they can be coinstalled with: >> >> sudo dpkg -i li*.deb >> >> Again try the alsa-driver-linuxant >> >> >> >> There may be a message that the patch must be applied. In this case get the >> >> ftp://ftp.alsa-project.org/pub/driver/alsa-driver-1.0.17.tar.bz2 >> >> Under Linux, this package is unpacked with: >> >> $ tar jxf alsa*.tar.bz2 >> >> Next the patch is applied with: >> >> $ patch -p0 < alsa-driver-1.0.17-1.patch >> >> >> >> See http://linmodems.technion.ac.il/bigarch/archive-eighth/msg00838.html >> >> for details on compiling and installing replacement snd-hda-intel + its >> >> dependent drivers. >> >> After the installation is completed, rerun the hsfmodem installation. >> >> Reboot and try to detect the modem with Root permission: >> >> sudo wvdialconf /etc/wvdial.conf >> >> >> >> Read DOCs/Conexant.txt >> >> >> >> Writing DOCs/Conexant.txt >> >> >> >> Writing DOCs/Smartlink.txt >> >> ============ end Smartlink section ===================== >> >> >> >> >> >> The base of the UDEV device file system is: /dev/.udev >> >> >> >> Versions adequately match for the compiler installed: 4.4.1 >> >> and the compiler used in kernel assembly: 4.4.1 >> >> >> >> The patch utility is needed and is needed for compiling ALSA drivers, >> and possibly others. >> >> >> >> >> >> Minimal compiling resources appear complete: >> >> make utility - /usr/bin/make >> >> Compiler version 4.4 >> >> linuc_headers base folder /lib/modules/2.6.31-14-generic/build >> >> >> >> However some compilations and executable functions may need additional >> files, >> >> in the FileNames.h (so called kernel "h"eaders) collection installed >> in /usr/include/ . >> >> For martian_modem, additional required packages are needed. The also >> required headers of package libc6 are commonly installed by default. >> >> Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev >> packages, for kernels 2.6.24 and later versions. >> >> In not included on your install CD, search for them at >> http://packages.ubuntu.com >> >> or comparable Repository for other Linux distros. >> >> When compiling ALSA drivers, the utility "patch" will also be needed. >> >> >> >> >> >> >> >> >> >> If a driver compilation fails, with message including some lack of some >> FileName.h (stdio.h for example), then >> >> Some additional kernel-header files need installation to /usr/include. >> The minimal additional packages are libc6-dev >> >> and any of its dependents, under Ubuntu linux-libc-dev >> >> >> >> If an alternate ethernet connection is available, >> >> $ apt-get update >> >> $ apt-get -s install linux-kernel-devel >> >> will install needed packages. >> >> For Debian/Ubuntu related distributions, run the following command to >> display the needed package list: >> >> >> >> Otherwise packages have to be found through http://packages.ubuntu.com >> >> Once downloaded and transferred into a Linux partition, >> >> they can be installed alltogether with: >> >> $ sudo dpkg -i *.deb >> >> >> >> >> >> Checking pppd properties: >> >> -rwsr-xr-- 1 root dip 277352 2009-02-20 18:25 /usr/sbin/pppd >> >> >> >> In case of an "error 17" "serial loopback" problem, see: >> >> http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html >> >> >> >> To enable dialout without Root permission do: >> >> $ su - root (not for Ubuntu) >> >> sudo chmod a+x /usr/sbin/pppd >> >> or under Ubuntu related Linuxes >> >> sudo chmod a+x /usr/sbin/pppd >> >> >> >> Checking settings of: /etc/ppp/options >> >> asyncmap 0 >> >> noauth >> >> crtscts >> >> lock >> >> hide-password >> >> modem >> >> proxyarp >> >> lcp-echo-interval 30 >> >> lcp-echo-failure 4 >> >> noipx >> >> >> >> In case of a message like: >> >> Warning: Could not modify /etc/ppp/pap-secrets: Permission denied >> >> see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html >> >> >> >> Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 >> >> Which can interfere with Browser naviagation. >> >> >> >> Don't worry about the following, it is for experts should trouble >> shooting be necessary. >> >> ========================================================== >> >> >> >> Checking for modem support lines: >> >> -------------------------------------- >> >> /device/modem symbolic link: >> >> slmodemd created symbolic link /dev/ttySL0: >> >> Within /etc/udev/ files: >> >> >> >> Within /etc/modprobe.conf files: >> >> /etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2 >> >> /etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2 >> >> /etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order >> to blacklist unwanted modem drivers >> >> /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem >> >> /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem >> >> Within any ancient /etc/devfs files: >> >> >> >> Within ancient kernel 2.4.n /etc/module.conf files: >> >> >> >> --------- end modem support lines -------- >> >> With windows i had: >> >> MODEM: >> Toshiba software modem >> Agere >> Emplacement 65535 (Internal High Definition Audio Bus) >> port: COM3 >> ID hardware:HDAUDIO\FUNC_02&VEN_11C1&DEV_1040&SUBSYS_11790001&REV_1002 >> >> DRIVER: >> Agere >> 17/03/2006 >> 2.1.68.0 >> Microsoft Windows Hardware Compatibility Publisher >> >> >> >
