Martin, I have achieved success with this 11c1:0620 chipset and Slax. I have a ready built module, if you are willing to get Slax and run from livecd or usb (Slax 6.1.2) I can send you the lzm module. The deb file that Marv sent you is for Ubuntu systems and you are installing it on PCLinuxOS and thus the failure. You might want to try and get the *.tar.gz equivalent file and try the build again. If you decide to do that, please post error messages that you might get. If you decide to try Slax, let me know and I can email you the lzm module and/or slax build script. Regards, Antonio On 11/28/09, Martin Lupcke <mossianin_lbcmi@xxxxxxxxxx> wrote: > First, Marvin, thank you for your patience with me and this situation. > > I checked the agrsm06pci-2.1.80-20090825 folder and the postinst file > you mention does not exist. I moved that folder to the /usr/src and > continued with your alternate commands. > > The first command (dkms add) worked successfully. > > The second command (dkms build) failed with the screen message > Error! Bad return status for module build on kernel: 2.6.26.8.text3 > (i586) > Consult the make.log in the build directory > /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/ for more information > > The contents of that log file are as follows: > > ==Begin make.log > DKMS make.log for agrsm06pci-2.1.80-20090825 for kernel 2.6.26.8.tex3 (i586) > Sat Nov 28 18:25:04 EST 2009 > make: Entering directory `/usr/src/linux-2.6.26.8.tex3' > LD /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/built-in.o > CC [M] /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.o > /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c: In > function ‘agr_pci_find_device’: > /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c:360: > warning: ignoring return value of ‘pci_enable_device’, declared with > attribute warn_unused_result > /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c: In > function ‘x_pcibios_read_config_byte’: > /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c:388: > warning: ‘pci_find_slot’ is deprecated (declared at include/linux/pci.h:516) > /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c: In > function ‘x_pcibios_read_config_word’: > /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c:391: > warning: ‘pci_find_slot’ is deprecated (declared at include/linux/pci.h:516) > /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c: In > function ‘x_pcibios_read_config_dword’: > /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c:394: > warning: ‘pci_find_slot’ is deprecated (declared at include/linux/pci.h:516) > /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c: In > function ‘x_pcibios_write_config_byte’: > /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c:397: > warning: ‘pci_find_slot’ is deprecated (declared at include/linux/pci.h:516) > /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c: In > function ‘x_pcibios_write_config_word’: > /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c:400: > warning: ‘pci_find_slot’ is deprecated (declared at include/linux/pci.h:516) > /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c: In > function ‘x_pcibios_write_config_dword’: > /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c:403: > warning: ‘pci_find_slot’ is deprecated (declared at include/linux/pci.h:516) > /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c: In > function ‘x_task_queue_init’: > /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c:442: > warning: assignment from incompatible pointer type > /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c: In > function ‘x_task_queue_init_usb’: > /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/agrsoftmodem.c:454: > warning: assignment from incompatible pointer type > CC [M] /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.o > In file included from > /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c:13: > include/sound/driver.h:1:2: warning: #warning "This file is deprecated" > /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c:280: warning: > function declaration isn’t a prototype > /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c:307: warning: > function declaration isn’t a prototype > /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c:314: warning: > function declaration isn’t a prototype > /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c: In function > ‘LnxTransferCodecVerbs’: > /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c:323: warning: > unused variable ‘CodecAddress’ > /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c: In function > ‘LnxTransferCodecVerbsWrite’: > /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c:344: warning: > unused variable ‘CodecAddress’ > /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c: In function > ‘findHDACodec’: > /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c:282: warning: > control reaches end of non-void function > /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c: In function > ‘GetHDABaseAddress’: > /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c:280: warning: > control reaches end of non-void function > /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c: In function > ‘getHDAStream’: > /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c:279: warning: > control reaches end of non-void function > /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c: In function > ‘LnxTransferCodecVerbs’: > /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c:340: warning: > ‘rvalue’ is used uninitialized in this function > /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c: In function > ‘LnxTransferCodecVerbsWrite’: > /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/hda.c:361: warning: > ‘rvalue’ is used uninitialized in this function > CC [M] /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/serial26.o > /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/serial26.c: In function > ‘receive_chars’: > /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/serial26.c:983: error: > ‘struct uart_info’ has no member named ‘port’ > /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/serial26.c: In function > ‘serial8250_startup’: > /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/serial26.c:1434: warning: > assignment from incompatible pointer type > /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/serial26.c: In function > ‘serial8250_set_termios’: > /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/serial26.c:1699: warning: > passing argument 2 of ‘uart_get_baud_rate’ from incompatible pointer type > /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/serial26.c:1699: warning: > passing argument 3 of ‘uart_get_baud_rate’ from incompatible pointer type > /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/serial26.c: At top level: > /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/serial26.c:2115: warning: > initialization from incompatible pointer type > /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/serial26.c:2116: warning: > initialization from incompatible pointer type > /var/lib/dkms/agrsm06pci/2.1.80-20090825/build/serial26.c:2123: warning: > initialization from incompatible pointer type > make[1]: *** [/var/lib/dkms/agrsm06pci/2.1.80-20090825/build/serial26.o] > Error 1 > make: *** [_module_/var/lib/dkms/agrsm06pci/2.1.80-20090825/build] Error 2 > make: Leaving directory `/usr/src/linux-2.6.26.8.tex3' > ==End make.log > > Can you offer any further help? > > > Marvin Stodolsky wrote: >> Martin >> >> This is a postinst file in your /usr/src/agrsm06pci-2.1.80-20090825 >> folder >> if the agrsm06pci-2.1.80-20090825 folder is not in /usr/src/ , move it >> there. >> >> Then with root permisssion, run >> # ./postinst >> >> or alternately the following commands; >> VER=2.1.80~20090825 >> dkms add -m agrsm06pci -v $VER >> dkms build -m agrsm06pci -v $VER >> dkms install -m agrsm06pci -v $VER >> >> If all successful >> # agrsm-test >> >> When you upgade to a new kernel, the dksm will automatically compile >> the matching kernels. >> provided that the linux-headers for the new kernel are also installed. >> >> MarvS >> >> On Fri, Nov 27, 2009 at 10:36 AM, Martin Lupcke >> <mossianin_lbcmi@xxxxxxxxxx> wrote: >> >>> Just to clarify, I am not sending these messages from the machine on >>> which I >>> am trying to install this driver. If I need to install anything, I have >>> to >>> be able to download from another machine and transfer via thumb drive, >>> etc. >>> Second, I just noticed that somehow the Ubuntu Linux got connected to >>> this >>> message and may be confusing. I am not running Ubuntu, I am running >>> PCLinuxOS2009. >>> I already downloaded the deb file you mentioned. When I try to install >>> the >>> driver with the dpkg command you provided earlier, I get a message about >>> command not found. This is not making sense to me since it appears that >>> the >>> dkms is already installed, based on the list of packages installed in the >>> Package Manager. All packages related to dkms are shown as installed. >>> So, I am confused. I cannot install the dkms without a modem and I >>> cannot >>> install the modem driver without dkms. To top it off, it appears that >>> dkms >>> is already installed. >>> >>> Is there a source for dkms that I can download from another mashine? I >>> can >>> try to reinstall dkms from that, if you think it would help. >>> Thanks. >>> >>> >>> Marvin Stodolsky wrote: >>> >>>> agrsm06pci-2.1.80-20090825_i386.deb is at >>>> http://linmodems.technion.ac.il/packages/ltmodem/11c11040/ >>>> but first install the dkms package, which will direct the driver >>>> compilation and installation. >>>> >>>> MarvS >>>> >>>> >>>> On Thu, Nov 26, 2009 at 7:28 PM, Martin Lupcke >>>> <mossianin_lbcmi@xxxxxxxxxx> wrote: >>>> >>>> >>>>> I feel like I am missing something somewhere. >>>>> I originally downloaded the file agrsm06pci-2.1.80-20090825.tar.gz. >>>>> After >>>>> unpacking, there are no *.deb files. >>>>> So, I rechecked and found agrsm06pci-2.1.80-20090825_i386.deb which I >>>>> just >>>>> downloaded and tried to install with your directions. Now I get a >>>>> "command >>>>> not found" message when attempting to do the dpkg command you provided. >>>>> As near as I can tell, the dkms is installed on the machine. I say >>>>> that >>>>> because all dkms-related items in the Package Manager (PCLinux2009) are >>>>> listed as installed. >>>>> I am beginning to think I am in a doom-loop. I cannot install the >>>>> driver >>>>> with dpkg, and I cannot connect to the internet to update any packages >>>>> because dial-up is my only means of connecting. >>>>> Any guidance would be appreciated. >>>>> Thanks for your efforts. >>>>> >>>>> >>>>> Marvin Stodolsky wrote: >>>>> >>>>> >>>>>> Martin, >>>>>> >>>>>> Don't use the agrinst. FIrst install the dkms package, if you haven't >>>>>> already. >>>>>> Then start the install with >>>>>> $ sudo dpkg -i agrsm*.deb >>>>>> and the dkms system will take over. >>>>>> >>>>>> With the agrsm-tools.deb package previously installed, then run >>>>>> $ sudo agrsm-test >>>>>> for detection of your modem. >>>>>> >>>>>> MarvS >>>>>> >>>>>> >>>>>> On Thu, Nov 26, 2009 at 3:57 PM, Martin Lupcke >>>>>> <mossianin_lbcmi@xxxxxxxxxx> wrote: >>>>>> >>>>>> >>>>>> >>>>>>> I used the "find" command as you provided and found two entries which >>>>>>> I >>>>>>> deleted. I then went to install the agrsm06pci-2.1.80-20090825 and >>>>>>> received >>>>>>> the following results: >>>>>>> ./agrinst >>>>>>> Installing Agere Softmodem driver version 2.1.80-Red Flag NE 5.0 >>>>>>> some files needed for installation are missing >>>>>>> >>>>>>> I stopped there and dropped this note for help. >>>>>>> \Thanks. >>>>>>> >>>>>>> >>>>>>> Marvin Stodolsky wrote: >>>>>>> >>>>>>> >>>>>>> >>>>>>>> Martin, >>>>>>>> >>>>>>>> agrsm06pci-2.1.80~20090825.tar.gz is the only package which may >>>>>>>> provide service for the 11c1:0630 chipset >>>>>>>> Best check that multiple driver sets are not installed somewhere: >>>>>>>> $ find /lib/modules/$(uname -r) -name agr*.ko >>>>>>>> >>>>>>>> If there are multiple. Best delete all and rerun the >>>>>>>> agrsm06pci-2.1.80~20090825.tar.gz install. >>>>>>>> If this was not the last installed delete all and rerun the >>>>>>>> agrsm06pci-2.1.80~20090825.tar.gz install >>>>>>>> >>>>>>>> It is not clear from your message below as to whether the wvdial >>>>>>>> package is installed or not. >>>>>>>> If not, from the bottom of http://linmodems.technion.ac.il/packages/ >>>>>>>> get the wvdial_jaunty_i386.zip >>>>>>>> Under Linux >>>>>>>> $ unzip wv*.zip >>>>>>>> $ cd wvdial_jaunty_i386 >>>>>>>> $ ls >>>>>>>> install with >>>>>>>> $ sudo dpkg -i *.deb >>>>>>>> >>>>>>>> Then rerun the >>>>>>>> $ sudo agrsm-test >>>>>>>> >>>>>>>> If successful, it will write a file /etc/wvdial.conf . Edit it >>>>>>>> with: >>>>>>>> $ sudo gedit /etc/wvdial.conf >>>>>>>> putting in personal info while deleting symbols: < > ; >>>>>>>> >>>>>>>> Then try a dialout with: >>>>>>>> $ sudo wvdial >>>>>>>> >>>>>>>> Upon a reboot the modem will be set up by: >>>>>>>> $ sudo modprobe agrserial >>>>>>>> You can check porsts with: >>>>>>>> $ ls -l /dev/AGR* /dev/SAGR >>>>>>>> and for driver loading: >>>>>>>> $ lsmod | grep agr >>>>>>>> >>>>>>>> Once you are online under Linux install the dkms driver update >>>>>>>> utility >>>>>>>> with: >>>>>>>> $ sudo apt-get update >>>>>>>> $ sudo apt-get install dkms >>>>>>>> >>>>>>>> MarvS >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> On Sat, Oct 3, 2009 at 1:34 PM, Martin Lupcke >>>>>>>> <mossianin_lbcmi@xxxxxxxxxx> wrote: >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>>> Several weeks ago, I sent a message back that I had tried a couple >>>>>>>>> of >>>>>>>>> driver >>>>>>>>> packages to get my 11c1:0630 modem working. Unfortunately, I have >>>>>>>>> lost >>>>>>>>> track since then. This is what I reported at that time. >>>>>>>>> I attempted to install the "agrsm-2.1.80limited" driver. The >>>>>>>>> results >>>>>>>>> of >>>>>>>>> the >>>>>>>>> install are shown below: >>>>>>>>> ./agrinst >>>>>>>>> Installing Agere Softmodem driver version 2.1.80-Red Flag NE 5.0 >>>>>>>>> some files needed for installation are missing >>>>>>>>> >>>>>>>>> >>>>>>>>> For kicks, I ran the agrsm-test. The results of that are listed >>>>>>>>> below: >>>>>>>>> >>>>>>>>> Loading drivers: >>>>>>>>> >>>>>>>>> Drivers loaded: >>>>>>>>> agrserial 11088 0 >>>>>>>>> agrmodem 1184932 1 agrserial >>>>>>>>> >>>>>>>>> and symbolic link created: >>>>>>>>> lrwxrwxrwx 1 root root 12 Sep 5 18:40 /dev/ttySAGR -> >>>>>>>>> /dev/ttyAGS3 >>>>>>>>> >>>>>>>>> Checking for utility wvdialconf >>>>>>>>> Found /usr/bin/wvdialconf, preparing to run: >>>>>>>>> wvdialconf /etc/wvdial.conf >>>>>>>>> >>>>>>>>> >>>>>>>>> A reboot may be necessary before modem detection through: >>>>>>>>> sudo modprobe agrserial >>>>>>>>> Which will load agrmodem, agrserial and create the symbolic link >>>>>>>>> needed >>>>>>>>> for: >>>>>>>>> sudo wvdialconf >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> I also tried to install the "agrsm06pci-2.1.80~20090825" with the >>>>>>>>> same >>>>>>>>> result as above. >>>>>>>>> Can you walk me thru what needs to be done now? >>>>>>>>> >>>>>>>>> >>>>>>>>> Thanks for all the help. >>>>>>>>> >>>>>>>>> >>>>>>>>> Jacques Goldberg wrote: >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>>> DONE but Martin the complete URL is >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> http://linmodems.technion.ac.il/packages/ltmodem/11c11040/agrsm06pci-2.1.80~20090825.tar.gz >>>>>>>>>> >>>>>>>>>> not just agrsm.tar.gz (as quoted by Marv just to show how one >>>>>>>>>> unpacks >>>>>>>>>> such >>>>>>>>>> a kind of file). >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> Jacques >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> Marvin Stodolsky wrote: >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>>> Martin >>>>>>>>>>> >>>>>>>>>>> Attached is the tarball packaging. >>>>>>>>>>> >>>>>>>>>>> # tar zxvf agrsm.tar.gz >>>>>>>>>>> and see the 1stReadme.txt therein. >>>>>>>>>>> If you are not using the Deb installer previously sent, >>>>>>>>>>> the best place to unpack it is in /usr/src/ to potentially enable >>>>>>>>>>> the >>>>>>>>>>> dkms support. >>>>>>>>>>> >>>>>>>>>>> Jacques, >>>>>>>>>>> put in the 11c11040 folder please. >>>>>>>>>>> >>>>>>>>>>> MarvS >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> On Sat, Aug 29, 2009 at 7:24 PM, Marvin >>>>>>>>>>> Stodolsky<marvin.stodolsky@xxxxxxxxx> wrote: >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>>> http://linmodems.technion.ac.il/packages/ltmodem11c11040/ >>>>>>>>>>>> is the correct address, but the server seems to be offline now. >>>>>>>>>>>> This happens occassional >>>>>>>>>>>> >>>>>>>>>>>> John >>>>>>>>>>>> >>>>>>>>>>>> http://linmodems.technion.ac.il/packages/ltmodem/11c11040/ is >>>>>>>>>>>> the >>>>>>>>>>>> correct address. I'll also send you the Debian installer >>>>>>>>>>>> variant >>>>>>>>>>>> >>>>>>>>>>>> MarvS >>>>>>>>>>>> >>>>>>>>>>>> On Sat, Aug 29, 2009 at 5:21 PM, Martin >>>>>>>>>>>> Lupcke<mossianin_lbcmi@xxxxxxxxxx> wrote: >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>>> I have been trying to follow the recent messages on the >>>>>>>>>>>>> 11c1:0620 >>>>>>>>>>>>> & >>>>>>>>>>>>> 0630 >>>>>>>>>>>>> modems. On the 24th, Jacques put a file at >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> http://linmodems.technion.ac.il/packages/ltmodem11c11040/agrsm-2.1.80-limited.tar.gz >>>>>>>>>>>>> but I cannot find it. (The path 11c11040 does not appear to >>>>>>>>>>>>> exist.) >>>>>>>>>>>>> Later, it seems like there were additional steps to install >>>>>>>>>>>>> this, >>>>>>>>>>>>> but >>>>>>>>>>>>> I got >>>>>>>>>>>>> totally lost trying to determine what should or should not be >>>>>>>>>>>>> done. >>>>>>>>>>>>> Most >>>>>>>>>>>>> recently (below), it seems that John got an 0620 working in >>>>>>>>>>>>> Ubuntu. >>>>>>>>>>>>> I am far from a Linux expert (obviously), but could someone >>>>>>>>>>>>> help >>>>>>>>>>>>> clear >>>>>>>>>>>>> this >>>>>>>>>>>>> up for me so I can try to get my 0630 working in PCLinux? >>>>>>>>>>>>> >>>>>>>>>>>>> Thanks. >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> john31608@xxxxxxxxxx wrote: >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>>> Marvin: >>>>>>>>>>>>>> I want you to know I have the agere SV92PP 11c10620 modem >>>>>>>>>>>>>> card >>>>>>>>>>>>>> now >>>>>>>>>>>>>> running reliably. I went with a fresh reinstall of Ubuntu9.04 >>>>>>>>>>>>>> Jaunty >>>>>>>>>>>>>> and >>>>>>>>>>>>>> installation of the following: >>>>>>>>>>>>>> >>>>>>>>>>>>>> agrsm-tools_0.0.1_all.deb >>>>>>>>>>>>>> dkms_2.0.21.1-Oubuntu3_all.deb >>>>>>>>>>>>>> gnome-network-admin-2.22.1-Oubuntu1_i386.deb >>>>>>>>>>>>>> Dial-up with jauntyDebs.tar.Izima This is a package >>>>>>>>>>>>>> consisting >>>>>>>>>>>>>> of >>>>>>>>>>>>>> wvdial >>>>>>>>>>>>>> with dependencies >>>>>>>>>>>>>> >>>>>>>>>>>>>> Finally agrsm06pci_2.1.80~20090825_i386.deb >>>>>>>>>>>>>> >>>>>>>>>>>>>> It was all double click and go with installation of >>>>>>>>>>>>>> agrmodem.ko >>>>>>>>>>>>>> and >>>>>>>>>>>>>> agrserial.ko to /lib/modules/2.6.28-11-generic/updates/dkms >>>>>>>>>>>>>> >>>>>>>>>>>>>> It looks like at this point from the terminal sudo agrsm-test >>>>>>>>>>>>>> would >>>>>>>>>>>>>> have taken me to completion save for entering my name, >>>>>>>>>>>>>> password >>>>>>>>>>>>>> and >>>>>>>>>>>>>> phone >>>>>>>>>>>>>> number in ./etc/wvdial.conf. Everything is spelled out as you >>>>>>>>>>>>>> go >>>>>>>>>>>>>> >>>>>>>>>>>>>> I had tried after running agrsm06pci_2.1.80~20090825_i386.deb >>>>>>>>>>>>>> >>>>>>>>>>>>>> sudo modprobe agrmodem >>>>>>>>>>>>>> >>>>>>>>>>>>>> sudo modprobe agrserial >>>>>>>>>>>>>> >>>>>>>>>>>>>> etc, etc using the page "LSI/AgereSystems 11c11040 chipset >>>>>>>>>>>>>> support >>>>>>>>>>>>>> installation ,using dkms tools" from the Linmodems discussion >>>>>>>>>>>>>> board >>>>>>>>>>>>>> of >>>>>>>>>>>>>> 20DEC2008 as a guide but I got lost trying to find the file >>>>>>>>>>>>>> wvtest. >>>>>>>>>>>>>> sudo >>>>>>>>>>>>>> agrsm-test rescued me. The modem was found on /dev/ttySAGR. >>>>>>>>>>>>>> While >>>>>>>>>>>>>> trying >>>>>>>>>>>>>> to configure the network tools point to point connection >>>>>>>>>>>>>> interface >>>>>>>>>>>>>> I >>>>>>>>>>>>>> lost >>>>>>>>>>>>>> the connection and it appears the file /dev/ttySAGR was lost >>>>>>>>>>>>>> but >>>>>>>>>>>>>> sudo >>>>>>>>>>>>>> agrsm-test brought it right back. I then had to reenter my >>>>>>>>>>>>>> name, >>>>>>>>>>>>>> phone >>>>>>>>>>>>>> and >>>>>>>>>>>>>> PW but it all went pretty smoothly. My hat is off to you and >>>>>>>>>>>>>> the >>>>>>>>>>>>>> others >>>>>>>>>>>>>> who >>>>>>>>>>>>>> have been so patient with all this. Thank You >>>>>>>>>>>>>> >>>>>>>>>>>>>> Yours truly, John W >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>> >>>>>>>> >>>>>> >>>> >> >> >
