Re: утиль scanModem

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Mikhail,

scanModem reports that you need hsfmodem drivers, which I do not think
exist for your ASP kernel :(, you might definitely need to compile to
try out

Predictive  diagnostics for card in bus 002:
	Modem chipset  detected on
SLOT="Bus 002 Device 002:"
NAME="Conexant Systems (Rockwell), Inc. SoftK56 Data Fax Voice CARP"
bus=002
USBmodemID=0572:1300
IDENT=hsfmodem
Driver=hsfmodem

For a detailed USB cellphone usage report, see
http://linmodems.technion.ac.il/bigarch/archive-eighth/msg03240.html
 For candidate modem in:  002
    Conexant Systems (Rockwell), Inc. SoftK56 Data Fax Voice CARP
      Primary device ID:  0572:1300
 Support type needed or chipset:	hsfmodem



Writing DOCs/Intel.txt

For owners of a Dell PCs with Conexant HSF modems, a driver source
package with full speed enabled is available, but requires driver
compiling. Read DOCs/Conexant.txt

 Start at  http://www.linuxant.com/drivers/hsf/full for
 eventually download of a hsfmodem-7.68.00.12full_k.???.zip package
 with ??? the package type (deb, rpm, tar etc)
 These packages have compiled drivers but will also compile a driver,
 if there is a mismatch between the resident kernel and provided driver.
 The generic hsfmodem-7.68.00.12full.tar.gz package only provides
compiling support


Start at http://www.linuxant.com/drivers/hsf/downloads-license.php to find the
hsfmodem package matching your System. For several Linux distros, there are
precompiled drivers matched to specific kernels. These have within the FileName,
your KernelVersion:	2.6.26.3_29.0.140asp.i686
They can be found through
http://www.linuxant.com/drivers/hsf/full/downloads.php
A more precise location may be given a few paragraphs below.

This is the part that you will need to apply:
--------------------------------------------------------------------------------------------
If an EXACT Match with your your KernelVersion is not found, one of the
"Generic packages with source" near the bottom of the page must be used.
Downloaded packages must be moved into the Linux partition (home folder is OK)
and unzipped with:
	unzip hsf*.zip
The installation command for a .deb suffic packages is, with root/adm
permission:
   dpkg -i hsf*.deb
while for .rpm suffix it is, with:
  rpm -i hsf*.rpm
 Read DOCs/Conexant.txt

Regards,

Antonio

On 11/26/09, Mikhail N.Kozak <mnk111@xxxxxxx> wrote:
> Здравствуйте, Discuss.
>
>
>> В итоге scanModem создаст несколько файлов с нужной информацией, в
>> которых придется разобраться. Если не получится, вышлите файл
>> ModemData.txt нам (eng). Постараемся помочь
>
> Увы, самому разобраться не удалось :(  Надеюсь на Вашу помощь.
> Единственно понял, что модем на чипе Conexant и надо что-то
> делать с ядром, кроме установки драйвера (я с Линуксом пока на <<Вы>>)
>
> --
> С уважением,
>  Mikhail                          mailto:mnk111@xxxxxxx


[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux