This is a NEW softmodem case!
-------------------------- System information ----------------------------
CPU=i686, CentOS release 5.3 (Final)
Kernel
Linux version 2.6.18-164.el5 (mockbuild@xxxxxxxxxxxxxxxxxxxx) (gcc
version 4.1.2 20080704 (Red Hat 4.1.2-46)) #1 SMP Thu Sep 3 03:33:56
EDT 2009
scanModem update of: 2009_09_15
The dkms driver upgrade utilities are installed,
There are no blacklisted modem drivers in /etc/modprobe* files
Potentially useful modem drivers now loaded are:
snd_intel8x0m
If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@xxxxxxxxxxxxx
For candidate card in slot 00:1f.6, firmware information and bootup
diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:1f.6 8086:2486 1014:0504 Modem: Intel Corporation 82801CA/CAM
AC'97 Modem Controller
Modem interrupt assignment and sharing:
11: 96762 XT-PIC yenta, uhci_hcd:usb1, uhci_hcd:usb2,
uhci_hcd:usb3, wifi0, Intel 82801CA-ICH3, Intel 82801CA-ICH3 Modem,
eth0, i915@pci:0000:00:02.0
--- Bootup diagnostics for card in PCI slot 00:1f.6 ----
ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [PILB] -> GSI 11 (level,
low) -> IRQ 11
ACPI: PCI interrupt for device 0000:00:1f.6 disabled
PCI: Enabling device 0000:00:1f.6 (0000 -> 0001)
ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [PILB] -> GSI 11 (level,
low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1f.6 to 64
The PCI slot 00:1f.6 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.
The ALSA verion is 1.0.14
The modem cards detected by "aplay -l" are:
card 1: Modem [Intel 82801CA-ICH3 Modem], device 0: Intel ICH - Modem
[Intel 82801CA-ICH3 Modem - Modem]
The /proc/asound/pcm file reports:
-----------------------
00-01: Intel ICH - MIC ADC : Intel 82801CA-ICH3 - MIC ADC : capture 1
00-00: Intel ICH : Intel 82801CA-ICH3 : playback 1 : capture 1
01-00: Intel ICH - Modem : Intel 82801CA-ICH3 Modem - Modem : playback
1 : capture 1
about /proc/asound/cards:
------------------------
0 [I82801CAICH3 ]: ICH - Intel 82801CA-ICH3
Intel 82801CA-ICH3 with AD1881A at irq 11
1 [Modem ]: ICH-MODEM - Intel 82801CA-ICH3 Modem
Intel 82801CA-ICH3 Modem at irq 11
Modem firmware information is in /proc/asound/card1/codec97#0/mc97#1-1
-----------------------------------------------
Extended modem ID: codec=1 LIN1
Lines in: /proc/asound/card1/codec97#0/mc97#1-1+regs
-------------------------------
0:7c = 5349 and 0:7e = 4c27
are translated from hexadecimal code into the modem chip identifier: SIL27
The driver snd-intel8x0m with its dependent drivers:
snd_intel8x0m 20685 0
snd_ac97_codec 93025 2 snd_intel8x0m,snd_intel8x0
snd_pcm 72133 4
snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd 55749 12
snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
snd_page_alloc 14281 3 snd_intel8x0m,snd_intel8x0,snd_pcm
----------
provide modem + audio support.
=== Finished firmware and bootup diagnostics, next deducing cogent
software. ===
Predictive diagnostics for card in bus 00:1f.6:
Modem chipset detected on
NAME="Modem: Intel Corporation 82801CA/CAM AC'97 Modem Controller "
CLASS=0703
PCIDEV=8086:2486
SUBSYS=1014:0504
IRQ=11
SOFT=8086:2486.MC97
CodecDiagnosed=SIL27
CodecClass=SIL
IDENT=slmodemd
Driver=snd-intel8x0m
For candidate modem in: 00:1f.6
0703 Modem: Intel Corporation 82801CA/CAM AC'97 Modem Controller
Primary device ID: 8086:2486
Subsystem PCI_id 1014:0504
Softmodem codec or chipset from diagnostics: SIL27, an
LSI/AgereSystems type
from Archives:
This is a NEW softmodem case! Please send the output ModemData.txt
to DISCUSS@xxxxxxxxxxxxx to enrich the Archive and help others!
If further assistance is not needed, please use email Subject:
New Case Only
-------------------------------------------
Support type needed or chipset: slmodemd
An ALSA (Advanced Linux Sound Architecture) modem driver: snd-intel8x0m
provides Low Level support enabling contact with the modem hardware.
For all BUT Conexant chip soft modems (using hsfmodem software)
complementary High Level support is through a Smartlink utility: slmodemd
Download from http://linmodems.technion.ac.il/packages/smartlink/
the package SLMODEMD.gcc4.1.tar.gz having a compiled slmodemd.
Unpack under Linux with:
$ tar zxf SLMODEMD.gcc4.1.tar.gz
and read instructions therein. But briefly, the modem is setup with command:
slmodemd -c YOUR_COUNTRY --alsa modem:1
reporting dynamic creation of ports:
/dev/ttySL0 --> /dev/pts/N , with N some number
Read DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow
through guidance.
Writing DOCs/Intel.txt
Writing DOCs/Smartlink.txt
============ end Smartlink section =====================
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.1.2
and the compiler used in kernel assembly: 4.1.2
Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.1
linuc_headers base folder /lib/modules/2.6.18-164.el5/build
However some compilations and executable functions may need additional files,
in the FileNames.h (so called kernel "h"eaders) collection installed
in /usr/include/ .
For martian_modem, additional required packages are needed. The also
required headers of package libc6 are commonly installed by default.
Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev
packages, for kernels 2.6.24 and later versions.
In not included on your install CD, search for them at
http://packages.ubuntu.com
or comparable Repository for other Linux distros.
When compiling ALSA drivers, the utility "patch" will also be needed.
If a driver compilation fails, with message including some lack of
some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include.
The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to
display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking pppd properties:
-r-xr-xr-x 1 root root 312172 Jan 21 2009 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
lock
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 eth1 wifi0
Which can interfere with Browser naviagation.
Don't worry about the following, it is for experts should trouble
shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
/etc/udev/rules.d/50-udev.rules:KERNEL=="modems/mwave*",
NAME="%k", GROUP="uucp", MODE="0660"
Within /etc/modprobe.conf files:
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
