ANDRE,
scanModem recommends hsfmodem drivers:
For candidate modem in: 02:01.0
0780 Communication controller: Conexant Systems, Inc. Conexant
SoftK56 Data/Fax Modem
Primary device ID: 14f1:2f50
Support type needed or chipset: hsfmodem
Writing DOCs/Intel.txt
For owners of a Dell PCs with Conexant HSF modems, a driver source
package with full speed enabled is available, but requires driver
compiling. Read DOCs/Conexant.txt
Support for the 14f1:2f50 and 14f1:2215 HSF modems is projected
early in 2007 from Linuxant.
From http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php
download hsfmodem-7.80.02.02full_k2.6.28_11_generic_ubuntu_i386.deb.zip
Under Linux unpack with:
$ unzip hsfmodem*.zip
Then install with:
$ sudo dpkg -i hsfmodem*.deb
Subsequently, the modem should be found with
$ sudo wvdialconf /etc/wvdial.conf
Edit in your personal information with:
$ sudo gedit /etc/wvdial.conf
and try dialing out with:
$ sudo wvdial.
See DOCs/Testing.txt for details.
wvdial is not installed as scanModem informs and shows how to install it too:
The dialer utility package WVDIAL does not appear to be installed on
your System.
For Ubuntu Jaunty users, there are at the bottom of
http://linmodems.technion.ac.il/packages/:
wvdial_jaunty_amd64.zip for x86_64, 64 bit bus systems.
wvdial_jaunty_i386.zip for 32 bit systems.
These are about 1 MB in size. After downloaded and copied into your
Linux partition:
$ unzip wv*.zip
Within the new folder:
$ sudo dpkg -i *.deb
will complete the wvdial installation
Please read Modem/DOCs/wvdial.txt for usage information.
Also, there could be difficulties getting modem to respond as scanModem shows:
For candidate card in slot 02:01.0, firmware information and bootup
diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
02:01.0 14f1:2f50 14f1:207c Communication controller: Conexant
Systems, Inc. Conexant SoftK56 Data/Fax Modem
Modem interrupt assignment and sharing:
23: 6369 6352 IO-APIC-fasteoi ehci_hcd:usb1, uhci_hcd:usb2
--- Bootup diagnostics for card in PCI slot 02:01.0 ----
[ 0.388074] pci 0000:02:01.0: reg 10 32bit mmio: [0xfebf0000-0xfebfffff]
[ 0.388079] pci 0000:02:01.0: reg 14 io port: [0xec00-0xec07]
[ 0.388106] pci 0000:02:01.0: PME# supported from D3hot D3cold
[ 0.388109] pci 0000:02:01.0: PME# disabled
The PCI slot 02:01.0 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
If you encounter those problems, just follow instructions provided.
Regards,
Antonio
On 10/19/09, ANDRE LUIZ DE LIMA <alima6323@xxxxxxxxx> wrote:
> Olá
>
> Estou com dificuldades para configurar o Ubuntu 9.04 para internet discada.
> Segue anexo o modemdata.txt, conforme instrução do proprio.
> Desde já agradeço.
>
> Andre
>
