Marvin:
Here is what you suggested (S#), followed by what I did and the results
I got (R#):
S1) First best to complete general support for dialout with the
wvdial_jaunty_i386.zip at the bottom of
http://linmodems.technion.ac.il/packages/
Unpack under Linux with: $ unzip wvial*.zip
Move into the new folder: $ cd wvdial_jaunty_i386
$ ls and install with: $ sudo dpkg -i *.deb
R1) I looked at the packages available in the Synaptic Package Manager and
saw "wvdial" and I
installed it (v 1.60.1+nmu2 (jaunty)). I could not determine the version of
the wvdial file at the linmodem url above, so please let me know if I should
still proceed as you suggested.
S2) Next best get the general driver update automation provided by package
dkms
R2) This paackage was already intalled on my system.
S3) Then from http://linmodems.technion.ac.il/packages/ltmodem/11c11040/
agrsm-tools_0.0.1_all.deb
agrsm06pci_2.1.80~20090825_i386.de
R3) I did the above.
S4) If not run automatically, after these installations run; $ sudo
agrsm-test
R4) I did the above. Report shown below:
Loading drivers:
Drivers loaded:
agrserial 19808 0
agrmodem 1340932 1
and symbolic link created:
lrwxrwxrwx 1 root root 12 2009-10-10 21:39 /dev/ttySAGR -> /dev/ttyAGS3
Checking for utility wvdialconf
Found /usr/bin/wvdialconf, preparing to run:
wvdialconf /etc/wvdial.conf
A file /etc/wvdial.conf already exists, first renaming to
/etc/wvdial.200910103910
Modem Port Scan<*1>: S0 S1 S2 S3
ttySAGR<*1>: ATQ0 V1 E1 -- OK
ttySAGR<*1>: ATQ0 V1 E1 Z -- OK
ttySAGR<*1>: ATQ0 V1 E1 S0=0 -- OK
ttySAGR<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttySAGR<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttySAGR<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttySAGR<*1>: Modem Identifier: ATI -- Agere SoftModem Version 2.1.80.0
ttySAGR<*1>: Speed 4800: AT -- OK
ttySAGR<*1>: Speed 9600: AT -- OK
ttySAGR<*1>: Speed 19200: AT -- OK
ttySAGR<*1>: Speed 38400: AT -- OK
ttySAGR<*1>: Speed 57600: AT -- OK
ttySAGR<*1>: Speed 115200: AT -- OK
ttySAGR<*1>: Max speed is 115200; that should be safe.
ttySAGR<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
/etc/wvdial.conf<Warn>: Can't open '/etc/wvdial.conf' for reading: No such
file or directory
/etc/wvdial.conf<Warn>: ...starting with blank configuration.
ttySAGR<Info>: Speed 115200; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
Found a modem on /dev/ttySAGR.
Modem detection successful
Read wdial.txt
Then edit /etc/wvdial.conf with: sudo gedit /etc/wvdial.conf
at the lines beginning with ; and deleting the ; < > "
Then try a dialout with: sudo wvdial
*************************************************************************
S5) from the above txt - Read wdial.txt
R5) I could not read "wdial.txt" as I could not find it.
S6) from the above txt - Then edit /etc/wvdial.conf with: sudo gedit
/etc/wvdial.conf
at the lines beginning with ; and deleting the ; < > "
R6) I did the above and left the line blank, so the .conf looks like the
following
[Dialer Defaults]
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Modem Type = Analog Modem
; Phone =
ISDN = 0
; Username =
Init1 = ATZ
; Password =
Modem = /dev/ttySAGR
Baud = 115200
S7) Then try a dialout with: sudo wvdial
R7) I get the following
:~$ sudo wvdial
--> WvDial: Internet dialer version 1.60
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Configuration does not specify a valid phone number.
--> Configuration does not specify a valid login name.
--> Configuration does not specify a valid password
***********************************************************************
I have disabled "Play alerts and sound affects" in Sound.
What is my next step? Should I download efax and efax-gtk?
TIA,
Bill Lowther
Marvin Stodolsky wrote:
>
> Bill,
>
> If fax is not functional under Microsoft, likely it will not be under
> Linux either.
> Many of the cheap consumer Winmodems are not Fax competent. If you
> need robust fax service,
> best purchase a Controller Chipset (hardware) modem. Read the
> InfoGeneral.txt for details.
>
> for more ordinary dialout services with your:
> Communication controller: Agere Systems Device 0620"
> CLASS=0780
> PCIDEV=11c1:0620
> SUBSYS=11c1:0620
> IRQ=5
> IDENT=agrsm
>
> Under CPU=i686, Ubuntu Linux version 2.6.28-15-generic
>
> First best to complete general support for dialout with the
> wvdial_jaunty_i386.zip at the bottom of
> http://linmodems.technion.ac.il/packages/
> Unpack under Linux with:
> $ unzip wvial*.zip
> Move into the new folder:
> $ cd wvdial_jaunty_i386
> $ ls
> and install with:
> $ sudo dpkg -i *.deb
>
> Next best get the general driver update automation provided by package
> dkms:
> http://packages.ubuntu.com/search?keywords=dkms&searchon=names&suite=jaunty§ion=all
> Then from http://linmodems.technion.ac.il/packages/ltmodem/11c11040/
> agrsm-tools_0.0.1_all.deb
> agrsm06pci_2.1.80~20090825_i386.deb
>
> In a common folder with the dkms and these to packages,
> all can be co-installed with:
> $ sudo dpkg -i *.deb
>
> If not run automatically, after these installations run;
> $ sudo agrsm-test
>
> Write back to the List (not me directly) if further help is needed.
> Sometimes it is necessary to disable Sound (pulseaudio) to achieve
> service with this modem and the agrsm software, see below.
>
> MarvS
> ===========
>
> ---------- Forwarded message ----------
> From: Jan Groenewald <jan@xxxxxxxxxx>
> Date: Sun, Aug 16, 2009 at 1:33 PM
> Subject: Re: Jan, South Africa, 2.6.27-7-generic, Agere on Jaunty
> To: Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx>
>
>
> Hi
>
> On Sun, Aug 16, 2009 at 10:48:23AM -0400, Marvin Stodolsky wrote:
>
> You can't blacklist snd-hda-intel as the agrsm drivers depend on it
> for 11c11040 chips
> Try:
> $ sudo /etc/init.d/pulseaudio stop
> before the modem tests.
>
> OK, it tries to dial. \o/
>
> /etc/init.d/pulseadio {stop,force-stop} does not work;
> says pulseaudio configured on a per user session basis.
>
> I had to use some methods in
>
> http://idyllictux.wordpress.com/2009/04/21/ubuntu-904-jaunty-keeping-the-beast-pulseaudio-at-bay/
> sudo mv /etc/X11/Xsession.d/70pulseaudio /root/
> sudo update-rc.d -f pulseaudio remove
> asoundconf unset-pulseaudio
> /etc/pulse/client.conf:autospawn = no
> System > Preferences > Sound >> all set to pulse (I will
> later try to enable Alsa while using the modem; this way
> it is all off; jaunty with intrepid kernel.)
>
> Attached some files. I think I need to check with the owner
> of the account on the username/password again, the username
> looked funny with two @ signs in it, but they reassured me
> that is what the provider told them.
>
> I use gnome-ppp for a user in the dialout and dip groups.
>
> regards,
> Jan
> --
>
>
>
>
>
>
> On Fri, Sep 18, 2009 at 11:19 PM, Bill <donnabill22@xxxxxxxxxxx> wrote:
>> Dear Sir/Madam:
>> I recently purchase a new eMachine computer (model #ET1161-05),
>> with Windows Vista Home Basic included. I have installed Ubuntu 9.04 on
>> one partition of the hard drive and kept the Windows on another
>> partition. Vista Home Basic does not support faxing operation, however,
>> there is a modem that is detected by Device Manager.
>> I have run the scanModem program. The attached report confirms
>> that there is an Agere modem on board. At this point I am confused as
>> to whether or not it can be used in a Linux system. Your assistance
>> would be greatly appreciated.
>> In the event that the Agere modem cannot be used, or if modifying
>> it
>> would be beyond my abilities (this is my first experience with Linux -
>> all previous computers had Windows), what would you recommend regarding
>> new modem/driver purchase/installation?
>> I am in the USA.
>>
>> TIA,
>> Bill Lowther
>>
>>
>>
>>
>
>
--
View this message in context: http://www.nabble.com/ScanModem-report-tp25518870p25844535.html
Sent from the Linux Winmodem Support - Discussion mailing list archive at Nabble.com.
