Hi, My name is Marco and I'm trying to get my Eeebuntu 9.04 (EeePC S101: atom 270, 16+16 Gb SSD, 2Gb ram) working with a CDMA phone modem, with a UTL ISP from Nepal. Any help would be most appreciated as I'm having to use Win XP on a 5Gb partition just for the dial up, and it hurts to do so! many thanks Marco -- Kind regards Mr. Marco Peter Projects Advisor: Community Health Initiatives CWS office, Indrapuri Marg Nagdhunga Pokhara - 8 Nepal www.cwsuk.org
CPU0 CPU1 0: 27910 0 IO-APIC-edge timer 1: 68 0 IO-APIC-edge i8042 8: 1 0 IO-APIC-edge rtc0 9: 1372 0 IO-APIC-fasteoi acpi 12: 145 0 IO-APIC-edge i8042 14: 8648 0 IO-APIC-edge ata_piix 15: 0 0 IO-APIC-edge ata_piix 16: 21752 0 IO-APIC-fasteoi uhci_hcd:usb5, HDA Intel, i915@pci:0000:00:02.0 18: 153 0 IO-APIC-fasteoi uhci_hcd:usb4, ath 19: 30 0 IO-APIC-fasteoi uhci_hcd:usb3 23: 6907 0 IO-APIC-fasteoi ehci_hcd:usb1, uhci_hcd:usb2 2300: 1 0 PCI-MSI-edge eth0 NMI: 0 0 Non-maskable interrupts LOC: 41894 43900 Local timer interrupts RES: 6083 11935 Rescheduling interrupts CAL: 49 89 Function call interrupts TLB: 911 1347 TLB shootdowns SPU: 0 0 Spurious interrupts ERR: 0 MIS: 0 [ 0.000000] BIOS EBDA/lowmem at: 0009fc00/0009fc00 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.28-11-generic (buildd@palmer) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #42-Ubuntu SMP Fri Apr 17 01:57:59 UTC 2009 (Ubuntu 2.6.28-11.42-generic) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007f7a0000 (usable) [ 0.000000] BIOS-e820: 000000007f7a0000 - 000000007f7ae000 (ACPI data) [ 0.000000] BIOS-e820: 000000007f7ae000 - 000000007f7f0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007f7f0000 - 000000007f800000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working it around. [ 0.000000] last_pfn = 0x7f7a0 max_arch_pfn = 0x100000 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000007f7a0000 (usable) [ 0.000000] modified: 000000007f7a0000 - 000000007f7ae000 (ACPI data) [ 0.000000] modified: 000000007f7ae000 - 000000007f7f0000 (ACPI NVS) [ 0.000000] modified: 000000007f7f0000 - 000000007f800000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000 [ 0.000000] RAMDISK: 378a9000 - 37fef91e [ 0.000000] Allocated new RAMDISK: 00881000 - 00fc791e [ 0.000000] Move RAMDISK from 00000000378a9000 - 0000000037fef91d to 00881000 - 00fc791d [ 0.000000] ACPI: RSDP 000FBCF0, 0014 (r0 ACPIAM) [ 0.000000] ACPI: RSDT 7F7A0000, 0040 (r1 _ASUS_ Notebook 2000902 MSFT 97) [ 0.000000] ACPI: FACP 7F7A0200, 0084 (r2 A_M_I_ OEMFACP 2000902 MSFT 97) [ 0.000000] ACPI: DSDT 7F7A0430, 539A (r1 P0019 P0019000 0 INTL 20060113) [ 0.000000] ACPI: FACS 7F7AE000, 0040 [ 0.000000] ACPI: APIC 7F7A0390, 005C (r1 A_M_I_ OEMAPIC 2000902 MSFT 97) [ 0.000000] ACPI: MCFG 7F7A03F0, 003C (r1 A_M_I_ OEMMCFG 2000902 MSFT 97) [ 0.000000] ACPI: OEMB 7F7AE040, 0061 (r1 A_M_I_ AMI_OEM 2000902 MSFT 97) [ 0.000000] ACPI: HPET 7F7A57D0, 0038 (r1 A_M_I_ OEMHPET 2000902 MSFT 97) [ 0.000000] ACPI: SSDT 7F7AEB80, 04F0 (r1 PmRef CpuPm 3000 INTL 20060113) [ 0.000000] ACPI: SLIC 7F7A5810, 0176 (r1 _ASUS_ Notebook 2000902 MSFT 97) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1155MB HIGHMEM available. [ 0.000000] 883MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 373fe000 [ 0.000000] low ram: 00000000 - 373fe000 [ 0.000000] bootmap 00012000 - 00018e80 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 000087c52c] TEXT DATA BSS ==> [0000100000 - 000087c52c] [ 0.000000] #4 [000087d000 - 0000881000] INIT_PG_TABLE ==> [000087d000 - 0000881000] [ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] #7 [0000881000 - 0000fc791e] NEW RAMDISK ==> [0000881000 - 0000fc791e] [ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000] [ 0.000000] found SMP MP-table at [c00ff780] 000ff780 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000373fe [ 0.000000] HighMem 0x000373fe -> 0x0007f7a0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0007f7a0 [ 0.000000] On node 0 totalpages: 522031 [ 0.000000] free_area_init_node: node 0, pgdat c06d0f80, node_mem_map c1000200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1736 pages used for memmap [ 0.000000] Normal zone: 220470 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2312 pages used for memmap [ 0.000000] HighMem zone: 293530 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 7f800000:7f600000) [ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517951 [ 0.000000] Kernel command line: root=UUID=eb81aa09-b6eb-42fb-99e4-73f98e052945 ro quiet splash [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1600.104 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.004000] allocated 10442560 bytes of page_cgroup [ 0.004000] please try cgroup_disable=memory option if you don't want [ 0.004000] Scanning for low memory corruption every 60 seconds [ 0.004000] Memory: 2044664k/2088576k available (4126k kernel code, 42604k reserved, 2208k data, 532k init, 1183368k highmem) [ 0.004000] virtual kernel memory layout: [ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB) [ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB) [ 0.004000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB) [ 0.004000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB) [ 0.004000] .init : 0xc0737000 - 0xc07bc000 ( 532 kB) [ 0.004000] .data : 0xc0507a6f - 0xc072fe60 (2208 kB) [ 0.004000] .text : 0xc0100000 - 0xc0507a6f (4126 kB) [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.004000] hpet clockevent registered [ 0.004000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.20 BogoMIPS (lpj=6400416) [ 0.004000] Security Framework initialized [ 0.004000] SELinux: Disabled at boot. [ 0.004000] AppArmor: AppArmor initialized [ 0.004000] Mount-cache hash table entries: 512 [ 0.004000] Initializing cgroup subsys ns [ 0.004000] Initializing cgroup subsys cpuacct [ 0.004000] Initializing cgroup subsys memory [ 0.004000] Initializing cgroup subsys freezer [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 24K [ 0.004000] CPU: L2 cache: 512K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 0 [ 0.004000] using mwait in idle threads. [ 0.004000] Checking 'hlt' instruction... OK. [ 0.019741] ACPI: Core revision 20080926 [ 0.022053] ACPI: Checking initramfs for custom DSDT [ 0.516614] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.557011] CPU0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02 [ 0.560002] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 3199.99 BogoMIPS (lpj=6399991) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 24K [ 0.004000] CPU: L2 cache: 512K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 0 [ 0.644218] CPU1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02 [ 0.644256] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.648068] Brought up 2 CPUs [ 0.648075] Total of 2 processors activated (6400.20 BogoMIPS). [ 0.648148] CPU0 attaching sched-domain: [ 0.648153] domain 0: span 0-1 level SIBLING [ 0.648158] groups: 0 1 [ 0.648169] CPU1 attaching sched-domain: [ 0.648173] domain 0: span 0-1 level SIBLING [ 0.648177] groups: 1 0 [ 0.648312] net_namespace: 776 bytes [ 0.648312] Booting paravirtualized kernel on bare hardware [ 0.648687] Time: 11:31:59 Date: 10/03/09 [ 0.648687] regulator: core version 0.5 [ 0.648687] NET: Registered protocol family 16 [ 0.648687] EISA bus registered [ 0.648687] ACPI: bus type pci registered [ 0.648687] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63 [ 0.648687] PCI: Not using MMCONFIG. [ 0.648816] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4 [ 0.648821] PCI: Using configuration type 1 for base access [ 0.653590] ACPI: EC: Look up EC in DSDT [ 0.666753] ACPI: Interpreter enabled [ 0.666764] ACPI: (supports S0 S1 S3 S4 S5) [ 0.666809] ACPI: Using IOAPIC for interrupt routing [ 0.666929] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63 [ 0.671322] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.671328] PCI: Using MMCONFIG for extended config space [ 0.681955] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 [ 0.681961] ACPI: EC: driver started in poll mode [ 0.682255] ACPI: No dock devices found. [ 0.682408] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.682533] pci 0000:00:02.0: reg 10 32bit mmio: [0xfbd00000-0xfbd7ffff] [ 0.682542] pci 0000:00:02.0: reg 14 io port: [0xdc80-0xdc87] [ 0.682550] pci 0000:00:02.0: reg 18 32bit mmio: [0xd0000000-0xdfffffff] [ 0.682559] pci 0000:00:02.0: reg 1c 32bit mmio: [0xfbcc0000-0xfbcfffff] [ 0.682600] pci 0000:00:02.1: reg 10 32bit mmio: [0xfbd80000-0xfbdfffff] [ 0.682735] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfbcb8000-0xfbcbbfff] [ 0.682786] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.682794] pci 0000:00:1b.0: PME# disabled [ 0.682873] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.682881] pci 0000:00:1c.0: PME# disabled [ 0.682963] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.682971] pci 0000:00:1c.1: PME# disabled [ 0.683053] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.683061] pci 0000:00:1c.2: PME# disabled [ 0.683140] pci 0000:00:1d.0: reg 20 io port: [0xd480-0xd49f] [ 0.683217] pci 0000:00:1d.1: reg 20 io port: [0xd800-0xd81f] [ 0.683292] pci 0000:00:1d.2: reg 20 io port: [0xd880-0xd89f] [ 0.683372] pci 0000:00:1d.3: reg 20 io port: [0xdc00-0xdc1f] [ 0.683453] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfbcb7c00-0xfbcb7fff] [ 0.683510] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.683518] pci 0000:00:1d.7: PME# disabled [ 0.683689] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO [ 0.683696] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO [ 0.683756] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07] [ 0.683767] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03] [ 0.683778] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07] [ 0.683790] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03] [ 0.683801] pci 0000:00:1f.2: reg 20 io port: [0xffa0-0xffaf] [ 0.683832] pci 0000:00:1f.2: PME# supported from D3hot [ 0.683839] pci 0000:00:1f.2: PME# disabled [ 0.683905] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f] [ 0.684108] pci 0000:02:00.0: reg 10 64bit mmio: [0xfbfc0000-0xfbffffff] [ 0.684123] pci 0000:02:00.0: reg 18 io port: [0xec80-0xecff] [ 0.684178] pci 0000:02:00.0: PME# supported from D3hot D3cold [ 0.684187] pci 0000:02:00.0: PME# disabled [ 0.684270] pci 0000:00:1c.1: bridge io port: [0xe000-0xefff] [ 0.684279] pci 0000:00:1c.1: bridge 32bit mmio: [0xfbf00000-0xfbffffff] [ 0.684370] pci 0000:01:00.0: reg 10 64bit mmio: [0xfbef0000-0xfbefffff] [ 0.684434] pci 0000:01:00.0: supports D1 [ 0.684438] pci 0000:01:00.0: PME# supported from D0 D1 D3hot [ 0.684447] pci 0000:01:00.0: PME# disabled [ 0.684538] pci 0000:00:1c.2: bridge 32bit mmio: [0xfbe00000-0xfbefffff] [ 0.684614] pci 0000:00:1e.0: transparent bridge [ 0.684660] bus 00 -> node 0 [ 0.684675] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.685146] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT] [ 0.685390] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 0.685661] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT] [ 0.710387] ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.710689] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.710982] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 7 10 11 12 14 15) [ 0.711277] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.711570] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.711862] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.712173] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.712474] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 0.712813] ACPI: WMI: Mapper loaded [ 0.712939] SCSI subsystem initialized [ 0.712939] libata version 3.00 loaded. [ 0.712939] usbcore: registered new interface driver usbfs [ 0.712939] usbcore: registered new interface driver hub [ 0.712939] usbcore: registered new device driver usb [ 0.712939] PCI: Using ACPI for IRQ routing [ 0.720021] Bluetooth: Core ver 2.13 [ 0.720057] NET: Registered protocol family 31 [ 0.720057] Bluetooth: HCI device and connection manager initialized [ 0.720057] Bluetooth: HCI socket layer initialized [ 0.720057] NET: Registered protocol family 8 [ 0.720057] NET: Registered protocol family 20 [ 0.720077] NetLabel: Initializing [ 0.720081] NetLabel: domain hash size = 128 [ 0.720084] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.720114] NetLabel: unlabeled traffic allowed by default [ 0.720144] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.720154] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.724114] AppArmor: AppArmor Filesystem Enabled [ 0.728023] Switched to high resolution mode on CPU 0 [ 0.728330] Switched to high resolution mode on CPU 1 [ 0.732025] pnp: PnP ACPI init [ 0.732048] ACPI: bus type pnp registered [ 0.736105] pnp: PnP ACPI: found 13 devices [ 0.736110] ACPI: ACPI bus type pnp unregistered [ 0.736117] PnPBIOS: Disabled by ACPI PNP [ 0.736139] system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved [ 0.736157] system 00:08: ioport range 0x25c-0x25f has been reserved [ 0.736163] system 00:08: ioport range 0x380-0x383 has been reserved [ 0.736169] system 00:08: ioport range 0x400-0x41f has been reserved [ 0.736175] system 00:08: ioport range 0x4d0-0x4d1 has been reserved [ 0.736181] system 00:08: ioport range 0x800-0x87f has been reserved [ 0.736187] system 00:08: ioport range 0x480-0x4bf has been reserved [ 0.736193] system 00:08: iomem range 0x8c000000-0x8c01ffff has been reserved [ 0.736200] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.736206] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved [ 0.736212] system 00:08: iomem range 0xfed50000-0xfed8ffff has been reserved [ 0.736219] system 00:08: iomem range 0xffb00000-0xffbfffff has been reserved [ 0.736226] system 00:08: iomem range 0xfff00000-0xffffffff could not be reserved [ 0.736238] system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved [ 0.736244] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.736255] system 00:0b: iomem range 0xe0000000-0xe3ffffff has been reserved [ 0.736267] system 00:0c: iomem range 0x0-0x9ffff could not be reserved [ 0.736273] system 00:0c: iomem range 0xc0000-0xcffff could not be reserved [ 0.736279] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved [ 0.736286] system 00:0c: iomem range 0x100000-0x7f7fffff could not be reserved [ 0.771461] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:03 [ 0.771467] pci 0000:00:1c.0: IO window: disabled [ 0.771476] pci 0000:00:1c.0: MEM window: disabled [ 0.771484] pci 0000:00:1c.0: PREFETCH window: disabled [ 0.771495] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02 [ 0.771502] pci 0000:00:1c.1: IO window: 0xe000-0xefff [ 0.771512] pci 0000:00:1c.1: MEM window: 0xfbf00000-0xfbffffff [ 0.771519] pci 0000:00:1c.1: PREFETCH window: disabled [ 0.771530] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:01 [ 0.771534] pci 0000:00:1c.2: IO window: disabled [ 0.771544] pci 0000:00:1c.2: MEM window: 0xfbe00000-0xfbefffff [ 0.771551] pci 0000:00:1c.2: PREFETCH window: disabled [ 0.771562] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04 [ 0.771566] pci 0000:00:1e.0: IO window: disabled [ 0.771575] pci 0000:00:1e.0: MEM window: disabled [ 0.771582] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.771612] pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.771622] pci 0000:00:1c.0: setting latency timer to 64 [ 0.771638] pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.771646] pci 0000:00:1c.1: setting latency timer to 64 [ 0.771662] pci 0000:00:1c.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 0.771670] pci 0000:00:1c.2: setting latency timer to 64 [ 0.771682] pci 0000:00:1e.0: setting latency timer to 64 [ 0.771690] bus: 00 index 0 io port: [0x00-0xffff] [ 0.771695] bus: 00 index 1 mmio: [0x000000-0xffffffff] [ 0.771700] bus: 03 index 0 mmio: [0x0-0x0] [ 0.771704] bus: 03 index 1 mmio: [0x0-0x0] [ 0.771708] bus: 03 index 2 mmio: [0x0-0x0] [ 0.771712] bus: 03 index 3 mmio: [0x0-0x0] [ 0.771716] bus: 02 index 0 io port: [0xe000-0xefff] [ 0.771721] bus: 02 index 1 mmio: [0xfbf00000-0xfbffffff] [ 0.771725] bus: 02 index 2 mmio: [0x0-0x0] [ 0.771729] bus: 02 index 3 mmio: [0x0-0x0] [ 0.771733] bus: 01 index 0 mmio: [0x0-0x0] [ 0.771738] bus: 01 index 1 mmio: [0xfbe00000-0xfbefffff] [ 0.771742] bus: 01 index 2 mmio: [0x0-0x0] [ 0.771746] bus: 01 index 3 mmio: [0x0-0x0] [ 0.771750] bus: 04 index 0 mmio: [0x0-0x0] [ 0.771754] bus: 04 index 1 mmio: [0x0-0x0] [ 0.771758] bus: 04 index 2 mmio: [0x0-0x0] [ 0.771762] bus: 04 index 3 io port: [0x00-0xffff] [ 0.771767] bus: 04 index 4 mmio: [0x000000-0xffffffff] [ 0.771787] NET: Registered protocol family 2 [ 0.784125] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.784648] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.785510] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.785962] TCP: Hash tables configured (established 131072 bind 65536) [ 0.785968] TCP reno registered [ 0.792181] NET: Registered protocol family 1 [ 0.792402] checking if image is initramfs... it is [ 1.806395] Freeing initrd memory: 7450k freed [ 1.806809] cpufreq: No nForce2 chipset. [ 1.807072] audit: initializing netlink socket (disabled) [ 1.807113] type=2000 audit(1254569519.804:1): initialized [ 1.821419] highmem bounce pool size: 64 pages [ 1.821433] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 1.824211] VFS: Disk quotas dquot_6.5.1 [ 1.824337] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.825672] fuse init (API version 7.10) [ 1.825850] msgmni has been set to 1698 [ 1.826200] alg: No test for stdrng (krng) [ 1.826234] io scheduler noop registered [ 1.826239] io scheduler anticipatory registered [ 1.826243] io scheduler deadline registered [ 1.826283] io scheduler cfq registered (default) [ 1.826306] pci 0000:00:02.0: Boot video device [ 1.829627] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 1.829689] pcieport-driver 0000:00:1c.0: found MSI capability [ 1.829736] pcieport-driver 0000:00:1c.0: irq 2303 for MSI/MSI-X [ 1.829757] pci_express 0000:00:1c.0:pcie00: allocate port service [ 1.829790] pci_express 0000:00:1c.0:pcie02: allocate port service [ 1.829818] pci_express 0000:00:1c.0:pcie03: allocate port service [ 1.829917] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [ 1.829975] pcieport-driver 0000:00:1c.1: found MSI capability [ 1.830017] pcieport-driver 0000:00:1c.1: irq 2302 for MSI/MSI-X [ 1.830038] pci_express 0000:00:1c.1:pcie00: allocate port service [ 1.830065] pci_express 0000:00:1c.1:pcie02: allocate port service [ 1.830092] pci_express 0000:00:1c.1:pcie03: allocate port service [ 1.830198] pcieport-driver 0000:00:1c.2: setting latency timer to 64 [ 1.830257] pcieport-driver 0000:00:1c.2: found MSI capability [ 1.830298] pcieport-driver 0000:00:1c.2: irq 2301 for MSI/MSI-X [ 1.830318] pci_express 0000:00:1c.2:pcie00: allocate port service [ 1.830351] pci_express 0000:00:1c.2:pcie02: allocate port service [ 1.830378] pci_express 0000:00:1c.2:pcie03: allocate port service [ 1.830505] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.831468] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.831697] ACPI: AC Adapter [AC0] (on-line) [ 1.833199] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 2.120842] ACPI: Battery Slot [BAT0] (battery present) [ 2.120991] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 2.120998] ACPI: Power Button (FF) [PWRF] [ 2.121115] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 [ 2.131309] ACPI: Lid Switch [LID] [ 2.131407] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 [ 2.131414] ACPI: Sleep Button (CM) [SLPB] [ 2.131511] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3 [ 2.131518] ACPI: Power Button (CM) [PWRB] [ 2.132716] ACPI: SSDT 7F7AE180, 023C (r1 PmRef Cpu0Ist 3000 INTL 20060113) [ 2.133429] ACPI: SSDT 7F7AE450, 0724 (r1 PmRef Cpu0Cst 3001 INTL 20060113) [ 2.134160] Monitor-Mwait will be used to enter C-1 state [ 2.134167] Monitor-Mwait will be used to enter C-2 state [ 2.134194] ACPI: CPU0 (power states: C1[C1] C2[C2]) [ 2.134247] processor ACPI_CPU:00: registered as cooling_device0 [ 2.134255] ACPI: Processor [P001] (supports 8 throttling states) [ 2.134925] ACPI: SSDT 7F7AE0B0, 00CC (r1 PmRef Cpu1Ist 3000 INTL 20060113) [ 2.135558] ACPI: SSDT 7F7AE3C0, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20060113) [ 2.136465] ACPI: CPU1 (power states: C1[C1] C2[C2]) [ 2.136506] processor ACPI_CPU:01: registered as cooling_device1 [ 2.136515] ACPI: Processor [P002] (supports 8 throttling states) [ 2.155535] thermal LNXTHERM:01: registered as thermal_zone0 [ 2.212535] ACPI: Thermal Zone [TZ00] (60 C) [ 2.212633] isapnp: Scanning for PnP cards... [ 2.566344] isapnp: No Plug & Play device found [ 2.577699] Serial: 8250/16550 driver4 ports, IRQ sharing enabled [ 2.579723] brd: module loaded [ 2.580400] loop: module loaded [ 2.580578] Fixed MDIO Bus: probed [ 2.580591] PPP generic driver version 2.4.2 [ 2.580723] input: Macintosh mouse button emulation as /devices/virtual/input/input4 [ 2.580787] Driver 'sd' needs updating - please use bus_type methods [ 2.580808] Driver 'sr' needs updating - please use bus_type methods [ 2.580949] ata_piix 0000:00:1f.2: version 2.12 [ 2.580984] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 2.580992] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] [ 2.736037] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 2.736195] scsi0 : ata_piix [ 2.736405] scsi1 : ata_piix [ 2.739234] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 2.739241] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 2.900398] ata1.00: ATA-8: ASUS-JM S41 SSD, 02.10102, max UDMA/100 [ 2.900404] ata1.00: 31522816 sectors, multi 0: LBA [ 2.908427] ata1.00: configured for UDMA/100 [ 3.064279] scsi 0:0:0:0: Direct-Access ATA ASUS-JM S41 SSD 02.1 PQ: 0 ANSI: 5 [ 3.064488] sd 0:0:0:0: [sda] 31522816 512-byte hardware sectors: (16.1 GB/15.0 GiB) [ 3.064531] sd 0:0:0:0: [sda] Write Protect is off [ 3.064537] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.064607] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 3.064748] sd 0:0:0:0: [sda] 31522816 512-byte hardware sectors: (16.1 GB/15.0 GiB) [ 3.064788] sd 0:0:0:0: [sda] Write Protect is off [ 3.064794] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.064864] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 3.064872] sda: sda1 sda2 [ 3.065417] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.065519] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.066940] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.066989] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 3.067038] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 3.067046] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 3.067161] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 3.071087] ehci_hcd 0000:00:1d.7: debug port 1 [ 3.071098] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 3.071126] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbcb7c00 [ 3.084020] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 3.084178] usb usb1: configuration #1 chosen from 1 choice [ 3.084234] hub 1-0:1.0: USB hub found [ 3.084250] hub 1-0:1.0: 8 ports detected [ 3.084467] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.084510] uhci_hcd: USB Universal Host Controller Interface driver [ 3.084581] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 3.084594] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 3.084600] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 3.084706] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 3.084741] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d480 [ 3.084891] usb usb2: configuration #1 chosen from 1 choice [ 3.084943] hub 2-0:1.0: USB hub found [ 3.084957] hub 2-0:1.0: 2 ports detected [ 3.085122] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 3.085134] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 3.085140] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 3.085224] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 3.085272] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d800 [ 3.085427] usb usb3: configuration #1 chosen from 1 choice [ 3.085480] hub 3-0:1.0: USB hub found [ 3.085499] hub 3-0:1.0: 2 ports detected [ 3.085665] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 3.085681] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 3.085687] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 3.085773] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 3.085819] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d880 [ 3.085974] usb usb4: configuration #1 chosen from 1 choice [ 3.086027] hub 4-0:1.0: USB hub found [ 3.086041] hub 4-0:1.0: 2 ports detected [ 3.086209] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 3.086220] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 3.086226] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 3.086310] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 3.086355] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000dc00 [ 3.086504] usb usb5: configuration #1 chosen from 1 choice [ 3.086557] hub 5-0:1.0: USB hub found [ 3.086570] hub 5-0:1.0: 2 ports detected [ 3.086829] usbcore: registered new interface driver libusual [ 3.086895] usbcore: registered new interface driver usbserial [ 3.086917] USB Serial support registered for generic [ 3.086949] usbcore: registered new interface driver usbserial_generic [ 3.086953] usbserial: USB Serial Driver core [ 3.087055] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 3.120131] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.120145] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 3.124085] mice: PS/2 mouse device common for all mice [ 3.144138] rtc_cmos 00:03: RTC can wake from S4 [ 3.144209] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 3.144252] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs [ 3.144401] device-mapper: uevent: version 1.0.3 [ 3.144610] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@xxxxxxxxxx [ 3.144797] device-mapper: multipath: version 1.0.5 loaded [ 3.144803] device-mapper: multipath round-robin: version 1.0.0 loaded [ 3.145007] EISA: Probing bus 0 at eisa.0 [ 3.145056] EISA: Detected 0 cards. [ 3.145288] cpuidle: using governor ladder [ 3.145468] cpuidle: using governor menu [ 3.146558] TCP cubic registered [ 3.146783] NET: Registered protocol family 10 [ 3.147634] lo: Disabled Privacy Extensions [ 3.148334] NET: Registered protocol family 17 [ 3.148381] Bluetooth: L2CAP ver 2.11 [ 3.148385] Bluetooth: L2CAP socket layer initialized [ 3.148390] Bluetooth: SCO (Voice Link) ver 0.6 [ 3.148394] Bluetooth: SCO socket layer initialized [ 3.148476] Marking TSC unstable due to TSC halts in idle [ 3.148497] Bluetooth: RFCOMM socket layer initialized [ 3.148510] Bluetooth: RFCOMM TTY layer initialized [ 3.148513] Bluetooth: RFCOMM ver 1.10 [ 3.149573] Using IPI No-Shortcut mode [ 3.149749] registered taskstats version 1 [ 3.149972] Magic number: 13:890:528 [ 3.150098] rtc_cmos 00:03: setting system clock to 2009-10-03 11:32:02 UTC (1254569522) [ 3.150107] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 3.150111] EDD information not available. [ 3.150486] Freeing unused kernel memory: 532k freed [ 3.150772] Write protecting the kernel text: 4128k [ 3.150884] Write protecting the kernel read-only data: 1532k [ 3.168397] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 3.596083] usb 1-5: new high speed USB device using ehci_hcd and address 4 [ 3.708220] ATL1E 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 3.708246] ATL1E 0000:02:00.0: setting latency timer to 64 [ 3.730745] usb 1-5: configuration #1 chosen from 1 choice [ 3.770095] Initializing USB Mass Storage driver... [ 3.814730] scsi2 : SCSI emulation for USB Mass Storage devices [ 3.825917] usbcore: registered new interface driver usb-storage [ 3.825931] USB Mass Storage support registered. [ 3.826160] usb-storage: device found at 4 [ 3.826166] usb-storage: waiting for device to settle before scanning [ 3.964077] usb 1-8: new high speed USB device using ehci_hcd and address 6 [ 4.195884] usb 1-8: configuration #1 chosen from 1 choice [ 4.436052] usb 2-2: new low speed USB device using uhci_hcd and address 2 [ 4.492754] EXT4-fs: barriers enabled [ 4.495214] kjournald2 starting. Commit interval 5 seconds [ 4.495251] EXT4-fs: delayed allocation enabled [ 4.495259] EXT4-fs: file extents enabled [ 4.497921] EXT4-fs: mballoc enabled [ 4.497930] EXT4-fs: mounted filesystem with ordered data mode. [ 4.606136] usb 2-2: configuration #1 chosen from 1 choice [ 4.848090] usb 3-2: new full speed USB device using uhci_hcd and address 2 [ 5.064712] usb 3-2: configuration #1 chosen from 1 choice [ 5.308108] usb 5-1: new full speed USB device using uhci_hcd and address 2 [ 5.480732] usb 5-1: configuration #1 chosen from 1 choice [ 5.819061] udev: starting version 141 [ 5.918030] eeepc: Eee PC Hotkey Driver [ 6.068645] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:17/input/input6 [ 6.100840] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 6.125846] Linux agpgart interface v0.103 [ 6.136630] agpgart-intel 0000:00:00.0: Intel 945GME Chipset [ 6.136982] agpgart-intel 0000:00:00.0: detected 7932K stolen memory [ 6.140172] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 6.186833] USB Serial support registered for moto-modem [ 6.186961] moto-modem 3-2:1.0: moto-modem converter detected [ 6.187466] usb 3-2: moto-modem converter now attached to ttyUSB0 [ 6.187501] moto-modem 3-2:1.1: moto-modem converter detected [ 6.187854] usb 3-2: moto-modem converter now attached to ttyUSB1 [ 6.187909] usbcore: registered new interface driver moto-modem [ 6.203011] cfg80211: Calling CRDA to update world regulatory domain [ 6.302174] usbcore: registered new interface driver hiddev [ 6.326895] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input7 [ 6.327089] ath9k: 0.1 [ 6.327172] ath9k 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 6.327193] ath9k 0000:01:00.0: setting latency timer to 64 [ 6.336350] Linux video capture interface: v2.00 [ 6.451853] Bluetooth: Generic Bluetooth USB driver ver 0.3 [ 6.452126] usbcore: registered new interface driver btusb [ 6.784899] generic-usb 0003:192F:0416.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-2/input0 [ 6.784966] usbcore: registered new interface driver usbhid [ 6.785041] usbhid: v2.6:USB HID core driver [ 6.788176] phy0: Selected rate control algorithm 'ath9k_rate_control' [ 6.803308] intel_rng: FWH not detected [ 6.824806] uvcvideo: Found UVC 1.00 device USB2.0 0.3M UVC WebCam (04f2:b036) [ 6.828201] input: USB2.0 0.3M UVC WebCam as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input8 [ 6.831528] input: PC Speaker as /devices/platform/pcspkr/input/input9 [ 6.849300] usbcore: registered new interface driver uvcvideo [ 6.849397] USB Video Class driver (v0.1.0) [ 6.852574] iTCO_vendor_support: vendor-support=0 [ 6.857573] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 [ 6.857816] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x0860) [ 6.857955] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 6.905597] Registered led device: ath9k-phy0:radio [ 6.905659] Registered led device: ath9k-phy0:assoc [ 6.905711] Registered led device: ath9k-phy0:tx [ 6.905763] Registered led device: ath9k-phy0:rx [ 6.906880] phy0: Atheros 9280: mem=0xf8000000, irq=18 [ 7.047576] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 7.047697] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 7.074992] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume [ 7.170318] cfg80211: World regulatory domain updated: [ 7.170327] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 7.170337] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 7.170344] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 7.170351] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 7.170359] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 7.170367] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 7.624074] psmouse serio1: ID: 10 00 64<6>elantech.c: assuming hardware version 2, firmware version 2.48 [ 7.894715] elantech.c: Synaptics capabilities query result 0x00, 0x02, 0x64. [ 7.921150] eeepc: Hotkey init flags 0x41 [ 7.924402] eeepc: Get control methods supported: 0x101713 [ 7.924646] input: Asus EeePC extra buttons as /devices/virtual/input/input10 [ 8.103867] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input11 [ 8.137487] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 8.137501] ACPI: I/O resource 0000:00:1f.3 [0x400-0x41f] conflicts with ACPI region SMRG [0x400-0x40f] [ 8.137508] ACPI: Device needs an ACPI driver [ 8.164497] lp: driver loaded but no devices found [ 8.824413] usb-storage: device scan complete [ 8.825048] scsi 2:0:0:0: Direct-Access Multi Flash Reader 1.00 PQ: 0 ANSI: 0 [ 8.892215] EXT4 FS on sda2, internal journal on sda2:8 [ 9.396765] sd 2:0:0:0: [sdb] 31388672 512-byte hardware sectors: (16.0 GB/14.9 GiB) [ 9.397629] sd 2:0:0:0: [sdb] Write Protect is off [ 9.397642] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00 [ 9.397651] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 9.400656] sd 2:0:0:0: [sdb] 31388672 512-byte hardware sectors: (16.0 GB/14.9 GiB) [ 9.401503] sd 2:0:0:0: [sdb] Write Protect is off [ 9.401515] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00 [ 9.401525] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 9.401543] sdb: sdb1 [ 9.402696] sd 2:0:0:0: [sdb] Attached SCSI removable disk [ 9.402834] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 10.053181] type=1505 audit(1254548829.401:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2120 [ 10.159776] type=1505 audit(1254548829.505:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2124 [ 10.160010] type=1505 audit(1254548829.505:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2124 [ 10.160010] type=1505 audit(1254548829.505:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2124 [ 10.160126] type=1505 audit(1254548829.509:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2124 [ 10.221261] type=1505 audit(1254548829.569:7): operation="profile_load" name="/usr/bin/freshclam" name2="default" pid=2129 [ 10.521506] type=1505 audit(1254548829.869:8): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2133 [ 10.521905] type=1505 audit(1254548829.869:9): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2133 [ 10.583015] type=1505 audit(1254548829.929:10): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2137 [ 14.367262] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 14.367272] Bluetooth: BNEP filters: protocol multicast [ 14.387237] Bridge firewalling registered [ 15.443678] ppdev: user-space parallel port driver [ 16.984320] [drm] Initialized drm 1.1.0 20060810 [ 16.999454] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 16.999469] pci 0000:00:02.0: setting latency timer to 64 [ 17.002608] [drm] Initialized i915 1.6.0 20080730 on minor 0 [ 17.006358] [drm:i915_setparam] *ERROR* unknown parameter 4 [ 17.006447] [drm:i915_getparam] *ERROR* Unknown parameter 6 [ 18.060344] [drm:i915_getparam] *ERROR* Unknown parameter 6 [ 19.652798] ATL1E 0000:02:00.0: irq 2300 for MSI/MSI-X [ 19.653500] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 19.678480] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 29.933963] [drm:i915_getparam] *ERROR* Unknown parameter 6 Module Size Used by nls_iso8859_1 12032 1 nls_cp437 13696 1 vfat 18816 1 fat 58272 1 vfat i915 65540 2 drm 96296 3 i915 binfmt_misc 16776 1 ppdev 15620 0 bridge 56340 0 stp 10500 1 bridge bnep 20224 2 input_polldev 11912 0 lp 17156 0 parport 42220 2 ppdev,lp i2c_i801 17296 0 joydev 18368 0 snd_hda_intel 435636 3 snd_pcm_oss 46336 0 snd_mixer_oss 22656 1 snd_pcm_oss snd_pcm 82948 2 snd_hda_intel,snd_pcm_oss snd_seq_dummy 10756 0 arc4 9856 2 snd_seq_oss 37760 0 ecb 10752 2 iTCO_wdt 19108 0 iTCO_vendor_support 11652 1 iTCO_wdt psmouse 61972 0 snd_seq_midi 14336 0 pcspkr 10496 0 serio_raw 13316 0 uvcvideo 63240 0 snd_rawmidi 29696 1 snd_seq_midi btusb 19608 2 compat_ioctl32 9344 1 uvcvideo videodev 41600 1 uvcvideo v4l1_compat 21764 2 uvcvideo,videodev ath9k 263224 0 usbhid 42336 0 snd_seq_midi_event 15104 2 snd_seq_oss,snd_seq_midi snd_seq 56880 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event mac80211 217208 1 ath9k snd_timer 29704 2 snd_pcm,snd_seq snd_seq_device 14988 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq moto_modem 10112 0 cfg80211 38032 1 mac80211 led_class 12036 1 ath9k snd 62628 15 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device intel_agp 34108 1 agpgart 42696 3 drm,intel_agp soundcore 15200 1 snd snd_page_alloc 16904 2 snd_hda_intel,snd_pcm video 25360 0 output 11008 1 video eeepc_laptop 18452 0 usb_storage 82880 1 atl1e 40212 0 fbcon 46112 0 tileblit 10752 1 fbcon font 16384 1 fbcon bitblit 13824 1 fbcon softcursor 9984 1 bitblit
Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server, as HTML can contain viruses. Use as the email Subject Line: YourName, YourCountry kernel 2.6.28-11-generic With this Subject Line cogent experts will be alerted, and useful case names left in the Archive. YourCountry will enable Country specific guidance. Linux experts in YourCountry can be found through: http://www.linux.org/groups/index.html. They will know your Country's modem code, which may be essential for dialup service. Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters. So in a day, also check the Archived responses at http://www.linmodems.org -------------------------- System information ---------------------------- CPU=i686, Linux version 2.6.28-11-generic (buildd@palmer) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #42-Ubuntu SMP Fri Apr 17 01:57:59 UTC 2009 scanModem update of: 2009_09_15 The dkms driver upgrade utilities are installed, There are no blacklisted modem drivers in /etc/modprobe* files Potentially useful modem drivers now loaded are: snd_hda_intel Attached USB devices are: ID 04f2:b036 Chicony Electronics Co., Ltd ID 058f:6366 Alcor Micro Corp. ID 0b05:b700 ASUSTek Computer, Inc. ID 05c6:3197 Qualcomm, Inc. CDMA Wireless Modem/Phone ID 192f:0416 Avago Technologies, Pte. If a cellphone is not detected, see http://ubuntuforums.org/archive/index.php/t-878554.html A sample report is: http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html If a USB modem or cellphone is attached and was not detected, please provide available information in your request to discuss@xxxxxxxxxxxxx For candidate card in slot 00:1b.0, firmware information and bootup diagnostics are: PCI slot PCI ID SubsystemID Name ---------- --------- --------- -------------- 00:1b.0 8086:27d8 1043:834a Audio device: Intel Corporation 82801G Modem interrupt assignment and sharing: 16: 21741 0 IO-APIC-fasteoi uhci_hcd:usb5, HDA Intel, i915@pci:0000:00:02.0 --- Bootup diagnostics for card in PCI slot 00:1b.0 ---- [ 0.682735] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfbcb8000-0xfbcbbfff] [ 0.682786] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.682794] pci 0000:00:1b.0: PME# disabled [ 7.047576] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 7.047697] HDA Intel 0000:00:1b.0: setting latency timer to 64 The PCI slot 00:1b.0 of the modem card may be disabled early in a bootup process, but then enabled later. If modem drivers load but the modem is not responsive, read DOCs/Bootup.txt about possible fixes. Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx if help is needed. ===== Advanced Linux Sound Architecture (ALSA) diagnostics ===== The ALSA packages provide audio support and also drivers for some modems. ALSA diagnostics are written during bootup to /proc/asound/ folders. The ALSA verion is 1.0.18 The modem cards detected by "aplay -l" are: None The /proc/asound/pcm file reports: ----------------------- 00-00: ALC269 Analog : ALC269 Analog : playback 1 : capture 1 about /proc/asound/cards: ------------------------ 0 [Intel ]: HDA-Intel - HDA Intel HDA Intel at 0xfbcb8000 irq 16 PCI slot 00:1b.0 has a High Definition Audio Card The drivers are in the kernel modules tree at: /lib/modules/2.6.28-11-generic/kernel/sound/pci/hda/snd-hda-intel.ko UNEXPECTED HDA diagnostic outcome. === Finished firmware and bootup diagnostics, next deducing cogent software. === A candidate modem is not evident among the PCI devices: ------------------------------------------------ 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02) 00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02) 01:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01) 02:00.0 Ethernet controller: Attansic Technology Corp. L1e Gigabit Ethernet Adapter (rev b0) ------------------------------------------------ with USB and bridge devices not displayed. If your modem is connected by an external serial cable, or mounted internally on an ISA card, scanModem would not access it. Try with Root permission $ sudo wvdialconf /etc/wvdial.conf to detect these modem types and some USB modems. If the detection is successful, read the DOCs/wvdial.txt . Edit the /etc/wvdial.conf with Root permission: sudo gedit /etc/wvdial.conf will be able to dial out with Root permission: sudo wvdial Many modems for which scanModem fails have Conexant chips. From http://www.linuxant.com/drivers/modemident.php get the ListModem tool, which will report on Conexant chipset modems If the above tests fail, please provide any independent information available on your modem. If an alternative boot into Microsoft windows can be done, do mouse clicks on: Start > Settings > Control Panel > Classical View (for Window XP) > System > Hardware > Device Manager > Modems > Click on the + > Modem. Double click to expand the graphic. Manufacturer information may be displayed. For example, CXT stands for Conexant. Click the Diagnostics Tab. Record any hardware ID or vendor and device information. From the Driver Details TAB, copy out the VENdor and DEVice information. Next do the Query Modem and record the ATI specifications displayed such as: ATI3 - Agere SoftModem Version 2.1.22 ATI5 - 2.1.22, AMR Intel MB, AC97 ID:SIL REV:0x27 Try to identify the modem setup file, with name perhaps MODEM.INF. If may contain chipset Vendor informaton. Predictive diagnostics for card in bus 00:1b.0: Modem chipset not detected on NAME="Audio device: Intel Corporation 82801G " CLASS=0403 PCIDEV=8086:27d8 SUBSYS=1043:834a IRQ=16 HDA=8086:27d8 SOFT=8086:27d8.HDA High Definition Audio (HDA) cards MAY host a modem chip in their Subsystem, and many are supported by the ALSA audio+modem driver snd-hda-intel A modem was not detected on HDA card 8086:27d8. If another modem card is present, then most likely 8086:27d8 does not host a modem. If another modem card has not been detected, then possibilities are: 1) A Conexant modem chip is present on 8086:27d8, as Conexant chips are frequently not detectable by ALSA diagnostics 2) The modem may be of the older non-PCI Controller Chipset (hardware) type. Try detection with Root permission: sudo wvdialconf /etc/wvdial.conf For candidate modem in: 00:1b.0 0403 Audio device: Intel Corporation 82801G Primary device ID: 8086:27d8 Subsystem PCI_id 1043:834a Softmodem codec or chipset from diagnostics: from Archives: Support type needed or chipset: Support can likely be achieved through two mutually exclusive alternatives: 1) The hsfmodem software for Conexant chipset modems: Read DOCs/Conexant.txt The following ALSA alternative CANNOT work with Conexant modems. 2) An ALSA modem driver plus slmodemd. Read DOCs/Smartlink.txt for details, and to test get the package SLMODEMD.gcc4.3.tar.gz from: http://linmodems.technion.ac.il/packages/smartlink/ Writing DOCs/Intel.txt For owners of a Dell PCs with Conexant HSF modems, a driver source package with full speed enabled is available, but requires driver compiling. Read DOCs/Conexant.txt From http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php download hsfmodem-7.80.02.02full_k2.6.28_11_generic_ubuntu_i386.deb.zip Under Linux unpack with: $ unzip hsfmodem*.zip Then install with: $ sudo dpkg -i hsfmodem*.deb Subsequently, the modem should be found with $ sudo wvdialconf /etc/wvdial.conf Edit in your personal information with: $ sudo gedit /etc/wvdial.conf and try dialing out with: $ sudo wvdial. See DOCs/Testing.txt for details. The directions following below need only be pursued, if the above procedures are not adequate. Start at http://www.linuxant.com/drivers/hsf/downloads-license.php to find the hsfmodem package matching your System. For several Linux distros, there are precompiled drivers matched to specific kernels. These have within the FileName, your KernelVersion: 2.6.28_11_generic They can be found through http://www.linuxant.com/drivers/hsf/full/downloads.php A more precise location may be given a few paragraphs below. If an EXACT Match with your your KernelVersion is not found, one of the "Generic packages with source" near the bottom of the page must be used. Downloaded packages must be moved into the Linux partition (home folder is OK) and unzipped with: unzip hsf*.zip The installation command for a .deb suffic packages is, with root/adm permission: sudo dpkg -i hsf*.deb while for .rpm suffix it is, with: rpm -i hsf*.rpm Support for Conexant chips hosted on High Definition Audio cards may require installation of additional packages, one of the alsa-driver-linuxant packages on http://www.linuxant.com/alsa-driver/ At the same time download the alsa-driver-1.0.17-1.patch , in case it prove to be later needed. During the hsfmodem install, there will be a message if there is necessary installation of alsa-driver-linuxant The installation command for a .deb suffic packages is, with root/adm permission: sudo dpkg -i hsf*.deb while for .rpm suffix it is, with: rpm -i hsf*.rpm There may a message that "Dependencies" are not satisfied. In this case the Ubuntu/Debian packages to be installed are linux-libc-dev & libc6-dev. Package names may be different for other Linuxes. If not on your install CD, these packages can be searched for at http://packages.ubuntu.com. After download, they can be coinstalled with: sudo dpkg -i li*.deb Again try the alsa-driver-linuxant There may be a message that the patch must be applied. In this case get the ftp://ftp.alsa-project.org/pub/driver/alsa-driver-1.0.17.tar.bz2 Under Linux, this package is unpacked with: $ tar jxf alsa*.tar.bz2 Next the patch is applied with: $ patch -p0 < alsa-driver-1.0.17-1.patch See http://linmodems.technion.ac.il/bigarch/archive-eighth/msg00838.html for details on compiling and installing replacement snd-hda-intel + its dependent drivers. After the installation is completed, rerun the hsfmodem installation. Reboot and try to detect the modem with Root permission: sudo wvdialconf /etc/wvdial.conf Read DOCs/Conexant.txt Writing DOCs/Conexant.txt Writing DOCs/Smartlink.txt ============ end Smartlink section ===================== The base of the UDEV device file system is: /dev/.udev Versions adequately match for the compiler installed: 4.3.3 and the compiler used in kernel assembly: 4.3.3 linux-headers-2.6.28-11-generic resources needed for compiling are not manifestly ready! If compiling is necessary packages must be installed, providing: linux-headers-2.6.28-11-generic If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev and any of its dependents, under Ubuntu linux-libc-dev If an alternate ethernet connection is available, $ apt-get update $ apt-get -s install linux-kernel-devel will install needed packages. For Debian/Ubuntu related distributions, run the following command to display the needed package list: Otherwise packages have to be found through http://packages.ubuntu.com Once downloaded and transferred into a Linux partition, they can be installed alltogether with: $ sudo dpkg -i *.deb Checking pppd properties: -rwsr-xr-- 1 root dip 277352 2009-02-20 23:10 /usr/sbin/pppd In case of an "error 17" "serial loopback" problem, see: http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html To enable dialout without Root permission do: $ su - root (not for Ubuntu) sudo chmod a+x /usr/sbin/pppd or under Ubuntu related Linuxes sudo chmod a+x /usr/sbin/pppd Checking settings of: /etc/ppp/options asyncmap 0 noauth crtscts lock hide-password modem proxyarp lcp-echo-interval 30 lcp-echo-failure 4 noipx In case of a message like: Warning: Could not modify /etc/ppp/pap-secrets: Permission denied see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 wlan0 wmaster0 Which can interfere with Browser naviagation. Don't worry about the following, it is for experts should trouble shooting be necessary. ========================================================== Checking for modem support lines: -------------------------------------- /device/modem symbolic link: slmodemd created symbolic link /dev/ttySL0: Within /etc/udev/ files: Within /etc/modprobe.conf files: /etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2 /etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2 /etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order to blacklist unwanted modem drivers /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem Within any ancient /etc/devfs files: Within ancient kernel 2.4.n /etc/module.conf files: --------- end modem support lines --------