I would appreciate help for both my on-board modem as well as the Huwaei ETS 2258.
Thanks,
Dawit
Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 2.6.28-11-generic
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=i686,
Linux version 2.6.28-11-generic (buildd@palmer) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #42-Ubuntu SMP Fri Apr 17 01:57:59 UTC 2009
scanModem update of: 2009_09_15
The dialer utility package WVDIAL does not appear to be installed on your System.
For Ubuntu Jaunty users, there are at the bottom of http://linmodems.technion.ac.il/packages/:
wvdial_jaunty_amd64.zip for x86_64, 64 bit bus systems.
wvdial_jaunty_i386.zip for 32 bit systems.
These are about 1 MB in size. After downloaded and copied into your Linux partition:
$ unzip wv*.zip
Within the new folder:
$ sudo dpkg -i *.deb
will complete the wvdial installation
Please read Modem/DOCs/wvdial.txt for usage information.
Presently install your Linux Distributions dkms package. It provides for automated driver updates,
following upgrade of your kernel. For details see http://linux.dell.com/projects.shtml#dkms
There are no blacklisted modem drivers in /etc/modprobe* files
Potentially useful modem drivers now loaded are:
Attached USB devices are:
ID 0451:3410 Texas Instruments, Inc. TUSB3410 Microcontroller
If a cellphone is not detected, see http://ubuntuforums.org/archive/index.php/t-878554.html
A sample report is: http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html
If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@xxxxxxxxxxxxx
For candidate card in slot 00:1f.6, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:1f.6 8086:24c6 14e4:4d64 Modem: Intel Corporation 82801DB/DBL/DBM
Modem interrupt assignment and sharing:
7: 2273 XT-PIC-XT Intel 82801DB-ICH4, eth0
--- Bootup diagnostics for card in PCI slot 00:1f.6 ----
[ 0.500118] pci 0000:00:1f.6: reg 10 io port: [0xb400-0xb4ff]
[ 0.500125] pci 0000:00:1f.6: reg 14 io port: [0xb080-0xb0ff]
[ 0.500155] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[ 0.500159] pci 0000:00:1f.6: PME# disabled
[ 1.857793] serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 7 (level, low) -> IRQ 7
[ 1.857800] serial 0000:00:1f.6: PCI INT B disabled
The PCI slot 00:1f.6 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
CPU0
0: 18782 XT-PIC-XT timer
1: 178 XT-PIC-XT i8042
2: 0 XT-PIC-XT cascade
3: 1 XT-PIC-XT
4: 1 XT-PIC-XT
5: 1 XT-PIC-XT
6: 1 XT-PIC-XT
7: 2273 XT-PIC-XT Intel 82801DB-ICH4, eth0
8: 0 XT-PIC-XT rtc0
9: 0 XT-PIC-XT acpi
10: 1 XT-PIC-XT
11: 4518 XT-PIC-XT ehci_hcd:usb1, uhci_hcd:usb2, uhci_hcd:usb3, uhci_hcd:usb4, ohci1394, yenta, radeon@pci:0000:01:00.0
12: 25084 XT-PIC-XT i8042
14: 1555 XT-PIC-XT ata_piix
15: 8747 XT-PIC-XT ata_piix
NMI: 0 Non-maskable interrupts
LOC: 0 Local timer interrupts
RES: 0 Rescheduling interrupts
CAL: 0 Function call interrupts
TLB: 0 TLB shootdowns
SPU: 0 Spurious interrupts
ERR: 0
MIS: 0
[ 0.000000] BIOS EBDA/lowmem at: 0009f000/0009f000
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.28-11-generic (buildd@palmer) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #42-Ubuntu SMP Fri Apr 17 01:57:59 UTC 2009 (Ubuntu 2.6.28-11.42-generic)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001ffc9000 (usable)
[ 0.000000] BIOS-e820: 000000001ffc9000 - 0000000020000000 (reserved)
[ 0.000000] BIOS-e820: 00000000feda0000 - 00000000fee00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] last_pfn = 0x1ffc9 max_arch_pfn = 0x100000
[ 0.000000] Scanning 2 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 0000000000007000 (usable)
[ 0.000000] modified: 0000000000007000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 0000000000092000 (usable)
[ 0.000000] modified: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000001ffc9000 (usable)
[ 0.000000] modified: 000000001ffc9000 - 0000000020000000 (reserved)
[ 0.000000] modified: 00000000feda0000 - 00000000fee00000 (reserved)
[ 0.000000] modified: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] kernel direct mapping tables up to 1ffc9000 @ 10000-16000
[ 0.000000] RAMDISK: 1f84c000 - 1ffb8094
[ 0.000000] ACPI: RSDP 000FDF00, 0014 (r0 DELL )
[ 0.000000] ACPI: RSDT 1FFF0000, 0028 (r1 DELL CPi R 27D30813 ASL 61)
[ 0.000000] ACPI: FACP 1FFF0400, 0074 (r1 DELL CPi R 27D30813 ASL 61)
[ 0.000000] ACPI: DSDT 1FFF0C00, 25D8 (r1 INT430 SYSFexxx 1001 MSFT 100000E)
[ 0.000000] ACPI: FACS 1FFFF800, 0040
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 1ffc9000
[ 0.000000] low ram: 00000000 - 1ffc9000
[ 0.000000] bootmap 00012000 - 00015ffc
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 001ffc9000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 000087c52c] TEXT DATA BSS ==> [0000100000 - 000087c52c]
[ 0.000000] #4 [001f84c000 - 001ffb8094] RAMDISK ==> [001f84c000 - 001ffb8094]
[ 0.000000] #5 [000087d000 - 0000881000] INIT_PG_TABLE ==> [000087d000 - 0000881000]
[ 0.000000] #6 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
[ 0.000000] #7 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] #8 [0000012000 - 0000016000] BOOTMAP ==> [0000012000 - 0000016000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0001ffc9
[ 0.000000] HighMem 0x0001ffc9 -> 0x0001ffc9
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000002
[ 0.000000] 0: 0x00000006 -> 0x00000007
[ 0.000000] 0: 0x00000010 -> 0x00000092
[ 0.000000] 0: 0x00000100 -> 0x0001ffc9
[ 0.000000] On node 0 totalpages: 130894
[ 0.000000] free_area_init_node: node 0, pgdat c06d0f80, node_mem_map c1000000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3941 pages, LIFO batch:0
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 125929 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 0000000000007000 - 0000000000010000
[ 0.000000] PM: Registered nosave memory: 0000000000092000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:deda0000)
[ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 1, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129870
[ 0.000000] Kernel command line: root=UUID=fdf0c5ff-36c8-435b-9fbe-cbbcda404a7a ro quiet splash
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] TSC: PIT calibration matches PMTIMER. 1 loops
[ 0.000000] Detected 2790.688 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.004000] allocated 2620340 bytes of page_cgroup
[ 0.004000] please try cgroup_disable=memory option if you don't want
[ 0.004000] Scanning for low memory corruption every 60 seconds
[ 0.004000] Memory: 500968k/524068k available (4126k kernel code, 22440k reserved, 2208k data, 532k init, 0k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
[ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.004000] vmalloc : 0xe07c9000 - 0xff3fe000 ( 492 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xdffc9000 ( 511 MB)
[ 0.004000] .init : 0xc0737000 - 0xc07bc000 ( 532 kB)
[ 0.004000] .data : 0xc0507a6f - 0xc072fe60 (2208 kB)
[ 0.004000] .text : 0xc0100000 - 0xc0507a6f (4126 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] SLUB: Genslabs=12, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.004012] Calibrating delay loop (skipped), value calculated using timer frequency.. 5581.37 BogoMIPS (lpj=11162752)
[ 0.004035] Security Framework initialized
[ 0.004045] SELinux: Disabled at boot.
[ 0.004066] AppArmor: AppArmor initialized
[ 0.004080] Mount-cache hash table entries: 512
[ 0.004244] Initializing cgroup subsys ns
[ 0.004249] Initializing cgroup subsys cpuacct
[ 0.004253] Initializing cgroup subsys memory
[ 0.004260] Initializing cgroup subsys freezer
[ 0.004280] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 0.004285] CPU: L2 cache: 512K
[ 0.004289] CPU: Hyper-Threading is disabled
[ 0.004307] Checking 'hlt' instruction... OK.
[ 0.020792] SMP alternatives: switching to UP code
[ 0.120783] Freeing SMP alternatives: 18k freed
[ 0.120790] ACPI: Core revision 20080926
[ 0.124218] ACPI: Checking initramfs for custom DSDT
[ 0.431828] ACPI: setting ELCR to 0200 (from 0800)
[ 0.432081] weird, boot CPU (#0) not listedby the BIOS.
[ 0.432084] SMP motherboard not detected.
[ 0.432087] Local APIC not detected. Using dummy APIC emulation.
[ 0.432089] SMP disabled
[ 0.432497] Brought up 1 CPUs
[ 0.432500] Total of 1 processors activated (5581.37 BogoMIPS).
[ 0.432517] CPU0 attaching NULL sched-domain.
[ 0.432998] net_namespace: 776 bytes
[ 0.433018] Booting paravirtualized kernel on bare hardware
[ 0.433295] Time: 11:45:34 Date: 09/23/09
[ 0.433304] regulator: core version 0.5
[ 0.433354] NET: Registered protocol family 16
[ 0.433522] EISA bus registered
[ 0.433543] ACPI: bus type pci registered
[ 0.486394] PCI: PCI BIOS revision 2.10 entry at 0xfcfae, last bus=2
[ 0.486397] PCI: Using configuration type 1 for base access
[ 0.488129] ACPI: EC: Look up EC in DSDT
[ 0.492475] ACPI: Interpreter enabled
[ 0.492483] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.492506] ACPI: Using PIC for interrupt routing
[ 0.499401] ACPI: No dock devices found.
[ 0.499414] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.499476] pci 0000:00:00.0: reg 10 32bit mmio: [0xe0000000-0xe7ffffff]
[ 0.499608] pci 0000:00:1d.0: reg 20 io port: [0xbf80-0xbf9f]
[ 0.499659] pci 0000:00:1d.1: reg 20 io port: [0xbf40-0xbf5f]
[ 0.499710] pci 0000:00:1d.2: reg 20 io port: [0xbf20-0xbf3f]
[ 0.499770] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf4fffc00-0xf4ffffff]
[ 0.499813] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.499819] pci 0000:00:1d.7: PME# disabled
[ 0.499868] * The chipset may have PM-Timer Bug. Due to workarounds for a bug,
[ 0.499869] * this clock source is slow. If you are sure your timer does not have
[ 0.499870] * this bug, please use "acpi_pm_good" to disable the workaround
[ 0.499910] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.499917] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
[ 0.499921] pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH4 GPIO
[ 0.499942] pci 0000:00:1f.1: reg 10 io port: [0x1f0-0x1f7]
[ 0.499950] pci 0000:00:1f.1: reg 14 io port: [0x3f4-0x3f7]
[ 0.499957] pci 0000:00:1f.1: reg 18 io port: [0x170-0x177]
[ 0.499963] pci 0000:00:1f.1: reg 1c io port: [0x374-0x377]
[ 0.499970] pci 0000:00:1f.1: reg 20 io port: [0xbfa0-0xbfaf]
[ 0.499977] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
[ 0.500041] pci 0000:00:1f.5: reg 10 io port: [0xb800-0xb8ff]
[ 0.500048] pci 0000:00:1f.5: reg 14 io port: [0xbc40-0xbc7f]
[ 0.500054] pci 0000:00:1f.5: reg 18 32bit mmio: [0xf4fff800-0xf4fff9ff]
[ 0.500061] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xf4fff400-0xf4fff4ff]
[ 0.500083] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[ 0.500087] pci 0000:00:1f.5: PME# disabled
[ 0.500118] pci 0000:00:1f.6: reg 10 io port: [0xb400-0xb4ff]
[ 0.500125] pci 0000:00:1f.6: reg 14 io port: [0xb080-0xb0ff]
[ 0.500155] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[ 0.500159] pci 0000:00:1f.6: PME# disabled
[ 0.500198] pci 0000:01:00.0: reg 10 32bit mmio: [0xe8000000-0xefffffff]
[ 0.500204] pci 0000:01:00.0: reg 14 io port: [0xc000-0xc0ff]
[ 0.500210] pci 0000:01:00.0: reg 18 32bit mmio: [0xfcff0000-0xfcffffff]
[ 0.500226] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.500235] pci 0000:01:00.0: supports D1 D2
[ 0.500272] pci 0000:00:01.0: bridge io port: [0xc000-0xcfff]
[ 0.500277] pci 0000:00:01.0: bridge 32bit mmio: [0xfc000000-0xfdffffff]
[ 0.500281] pci 0000:00:01.0: bridge 32bit mmio pref: [0xe8000000-0xefffffff]
[ 0.500316] pci 0000:02:01.0: reg 10 32bit mmio: [0xfaffe000-0xfaffffff]
[ 0.500349] pci 0000:02:01.0: supports D1 D2
[ 0.500352] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.500356] pci 0000:02:01.0: PME# disabled
[ 0.500387] pci 0000:02:02.0: reg 10 32bit mmio: [0xfaffc000-0xfaffdfff]
[ 0.500421] pci 0000:02:02.0: supports D1 D2
[ 0.500423] pci 0000:02:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.500427] pci 0000:02:02.0: PME# disabled
[ 0.500461] pci 0000:02:04.0: reg 10 32bit mmio: [0x000000-0x000fff]
[ 0.500470] pci 0000:02:04.0: supports D1 D2
[ 0.500472] pci 0000:02:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.500477] pci 0000:02:04.0: PME# disabled
[ 0.500509] pci 0000:02:04.1: reg 10 32bit mmio: [0xfaffb800-0xfaffbfff]
[ 0.500516] pci 0000:02:04.1: reg 14 32bit mmio: [0xfaff4000-0xfaff7fff]
[ 0.500548] pci 0000:02:04.1: supports D1 D2
[ 0.500550] pci 0000:02:04.1: PME# supported from D0 D1 D2 D3hot
[ 0.500554] pci 0000:02:04.1: PME# disabled
[ 0.500597] pci 0000:00:1e.0: transparent bridge
[ 0.500602] pci 0000:00:1e.0: bridge io port: [0xd000-0xefff]
[ 0.500607] pci 0000:00:1e.0: bridge 32bit mmio: [0xf6000000-0xfbffffff]
[ 0.500637] bus 00 -> node 0
[ 0.500645] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.500948] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.501040] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
[ 0.508156] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
[ 0.508296] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *11
[ 0.508434] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11)
[ 0.508571] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11)
[ 0.508710] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.508851] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.508993] ACPI: WMI: Mapper loaded
[ 0.509280] SCSI subsystem initialized
[ 0.509330] libata version 3.00 loaded.
[ 0.509392] usbcore: registered new interface driver usbfs
[ 0.509416] usbcore: registered new interface driver hub
[ 0.509450] usbcore: registered new device driver usb
[ 0.509590] PCI: Using ACPI for IRQ routing
[ 0.509708] Bluetooth: Core ver 2.13
[ 0.509708] NET: Registered protocol family 31
[ 0.509708] Bluetooth: HCI device and connection manager initialized
[ 0.509708] Bluetooth: HCI socket layer initialized
[ 0.509708] NET: Registered protocol family 8
[ 0.509708] NET: Registered protocol family 20
[ 0.509708] NetLabel: Initializing
[ 0.509708] NetLabel: domain hash size = 128
[ 0.509708] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.509708] NetLabel: unlabeled traffic allowed by default
[ 0.509708] AppArmor: AppArmor Filesystem Enabled
[ 0.509708] pnp: PnP ACPI init
[ 0.509708] ACPI: bus type pnp registered
[ 0.521356] pnp 00:02: io resource (0x800-0x805) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling
[ 0.521360] pnp 00:02: io resource (0x808-0x80f) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling
[ 0.521438] pnp 00:03: io resource (0x806-0x807) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling
[ 0.521442] pnp 00:03: io resource (0x810-0x85f) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling
[ 0.521445] pnp 00:03: io resource (0x860-0x87f) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling
[ 0.522446] pnp: PnP ACPI: found 11 devices
[ 0.522448] ACPI: ACPI bus type pnp unregistered
[ 0.522454] PnPBIOS: Disabled by ACPI PNP
[ 0.522466] system 00:00: iomem range 0x0-0x9fbff could not be reserved
[ 0.522469] system 00:00: iomem range 0x9fc00-0x9ffff could not be reserved
[ 0.522473] system 00:00: iomem range 0xc0000-0xcffff could not be reserved
[ 0.522476] system 00:00: iomem range 0xe0000-0xfffff could not be reserved
[ 0.522479] system 00:00: iomem range 0x100000-0x1ffeffff could not be reserved
[ 0.522482] system 00:00: iomem range 0x1fff0000-0x1fffffff has been reserved
[ 0.522485] system 00:00: iomem range 0xfeda0000-0xfedfffff has been reserved
[ 0.522487] system 00:00: iomem range 0xffb00000-0xffbfffff has been reserved
[ 0.522495] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 0.522501] system 00:03: ioport range 0xf400-0xf4fe has been reserved
[ 0.522505] system 00:03: ioport range 0x880-0x8bf has been reserved
[ 0.522507] system 00:03: ioport range 0x8c0-0x8df has been reserved
[ 0.522510] system 00:03: ioport range 0x8e0-0x8ff has been reserved
[ 0.522517] system 00:08: ioport range 0x900-0x97f has been reserved
[ 0.557297] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.557301] pci 0000:00:01.0: IO window: 0xc000-0xcfff
[ 0.557307] pci 0000:00:01.0: MEM window: 0xfc000000-0xfdffffff
[ 0.557311] pci 0000:00:01.0: PREFETCH window: 0x000000e8000000-0x000000efffffff
[ 0.557323] pci 0000:02:04.0: CardBus bridge, secondary bus 0000:03
[ 0.557326] pci 0000:02:04.0: IO window: 0x00d000-0x00d0ff
[ 0.557330] pci 0000:02:04.0: IO window: 0x00d400-0x00d4ff
[ 0.557335] pci 0000:02:04.0: PREFETCH window: 0x30000000-0x33ffffff
[ 0.557339] pci 0000:02:04.0: MEM window: 0x38000000-0x3bffffff
[ 0.557344] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[ 0.557347] pci 0000:00:1e.0: IO window: 0xd000-0xefff
[ 0.557353] pci 0000:00:1e.0: MEM window: 0xf6000000-0xfbffffff
[ 0.557358] pci 0000:00:1e.0: PREFETCH window: 0x00000030000000-0x00000033ffffff
[ 0.557377] pci 0000:00:1e.0: setting latency timer to 64
[ 0.557385] pci 0000:02:04.0: enabling device (0000 -> 0003)
[ 0.557586] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 0.557589] PCI: setting IRQ 11 as level-triggered
[ 0.557594] pci 0000:02:04.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 0.557602] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.557604] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 0.557607] bus: 01 index 0 io port: [0xc000-0xcfff]
[ 0.557609] bus: 01 index 1 mmio: [0xfc000000-0xfdffffff]
[ 0.557611] bus: 01 index 2 mmio: [0xe8000000-0xefffffff]
[ 0.557613] bus: 01 index 3 mmio: [0x0-0x0]
[ 0.557616] bus: 02 index 0 io port: [0xd000-0xefff]
[ 0.557618] bus: 02 index 1 mmio: [0xf6000000-0xfbffffff]
[ 0.557620] bus: 02 index 2 mmio: [0x30000000-0x33ffffff]
[ 0.557622] bus: 02 index 3 io port: [0x00-0xffff]
[ 0.557624] bus: 02 index 4 mmio: [0x000000-0xffffffff]
[ 0.557627] bus: 03 index 0 io port: [0xd000-0xd0ff]
[ 0.557629] bus: 03 index 1 io port: [0xd400-0xd4ff]
[ 0.557631] bus: 03 index 2 mmio: [0x30000000-0x33ffffff]
[ 0.557633] bus: 03 index 3 mmio: [0x38000000-0x3bffffff]
[ 0.557644] NET: Registered protocol family 2
[ 0.557795] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.558069] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.558185] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.558296] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.558299] TCP reno registered
[ 0.558410] NET: Registered protocol family 1
[ 0.558578] checking if image is initramfs... it is
[ 1.060061] Switched to high resolution mode on CPU 0
[ 1.208063] Freeing initrd memory: 7600k freed
[ 1.208191] cpufreq: No nForce2 chipset.
[ 1.208391] audit: initializing netlink socket (disabled)
[ 1.208421] type=2000 audit(1253706335.208:1): initialized
[ 1.215316] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.216681] VFS: Disk quotas dquot_6.5.1
[ 1.216745] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.217443] fuse init (API version 7.10)
[ 1.217543] msgmni has been set to 993
[ 1.217758] alg: No test for stdrng (krng)
[ 1.217774] io scheduler noop registered
[ 1.217777] io scheduler anticipatory registered
[ 1.217779] io scheduler deadline registered
[ 1.217803] io scheduler cfq registered (default)
[ 1.217904] pci 0000:01:00.0: Boot video device
[ 1.219387] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.219400] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.219763] ACPI: AC Adapter [AC] (on-line)
[ 1.496534] ACPI: Battery Slot [BAT0] (battery present)
[ 1.496623] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 1.496947] ACPI: Lid Switch [LID]
[ 1.497000] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.497005] ACPI: Power Button (CM) [PBTN]
[ 1.497054] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 1.497057] ACPI: Sleep Button (CM) [SBTN]
[ 1.497357] processor ACPI_CPU:00: registered as cooling_device0
[ 1.497362] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 1.500255] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.503002] ACPI: Thermal Zone [THM] (65 C)
[ 1.503056] isapnp: Scanning for PnP cards...
[ 1.855769] isapnp: No Plug & Play device found
[ 1.857203] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.857783] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 7
[ 1.857787] PCI: setting IRQ 7 as level-triggered
[ 1.857793] serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 7 (level, low) -> IRQ 7
[ 1.857800] serial 0000:00:1f.6: PCI INT B disabled
[ 1.858637] brd: module loaded
[ 1.859020] loop: module loaded
[ 1.859137] Fixed MDIO Bus: probed
[ 1.859145] PPP generic driver version 2.4.2
[ 1.859219] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 1.859263] Driver 'sd' needs updating - please use bus_type methods
[ 1.859275] Driver 'sr' needs updating - please use bus_type methods
[ 1.859358] ata_piix 0000:00:1f.1: version 2.12
[ 1.859370] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[ 1.859377] ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 1.859452] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1.859612] scsi0 : ata_piix
[ 1.859747] scsi1 : ata_piix
[ 1.859930] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14
[ 1.859933] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15
[ 2.024317] ata1.00: ATAPI: QSI CD-RW/DVD-ROM SBW-242, UD22, max UDMA/33
[ 2.040264] ata1.00: configured for UDMA/33
[ 2.204577] ata2.00: ATA-5: IC25N040ATCS04-0, CA4OA72A, max UDMA/100
[ 2.204580] ata2.00: 78140160 sectors, multi 8: LBA
[ 2.220527] ata2.00: configured for UDMA/100
[ 2.221136] scsi 0:0:0:0: CD-ROM QSI CDRW/DVD SBW-242 UD22 PQ: 0 ANSI: 5
[ 2.223908] sr0: scsi3-mmc drive: 4x/24x writer cd/rw xa/form2 cdda tray
[ 2.223912] Uniform CD-ROM driver Revision: 3.20
[ 2.224062] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 2.224132] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 2.224236] scsi 1:0:0:0: Direct-Access ATA IC25N040ATCS04-0 CA4O PQ: 0 ANSI: 5
[ 2.224348] sd 1:0:0:0: [sda] 78140160 512-byte hardware sectors: (40.0 GB/37.2 GiB)
[ 2.224367] sd 1:0:0:0: [sda] Write Protect is off
[ 2.224370] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.224399] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.224466] sd 1:0:0:0: [sda] 78140160 512-byte hardware sectors: (40.0 GB/37.2 GiB)
[ 2.224482] sd 1:0:0:0: [sda] Write Protect is off
[ 2.224485] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.224513] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.224518] sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
[ 2.291103] sd 1:0:0:0: [sda] Attached SCSI disk
[ 2.291161] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 2.291899] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.292196] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
[ 2.292202] ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11
[ 2.292235] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.292240] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.292321] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 2.296229] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.296236] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
[ 2.296246] ehci_hcd 0000:00:1d.7: irq 11, io mem 0xf4fffc00
[ 2.312029] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.312128] usb usb1: configuration #1 chosen from 1 choice
[ 2.312162] hub 1-0:1.0: USB hub found
[ 2.312174] hub 1-0:1.0: 6 ports detected
[ 2.312314] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.312339] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.312394] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 2.312403] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.312407] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.312469] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.312491] uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000bf80
[ 2.312589] usb usb2: configuration #1 chosen from 1 choice
[ 2.312620] hub 2-0:1.0: USB hub found
[ 2.312630] hub 2-0:1.0: 2 ports detected
[ 2.312944] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 2.312948] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 2.312956] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.312959] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.313014] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 2.313036] uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000bf40
[ 2.313123] usb usb3: configuration #1 chosen from 1 choice
[ 2.313156] hub 3-0:1.0: USB hub found
[ 2.313167] hub 3-0:1.0: 2 ports detected
[ 2.313439] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 2.313443] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 2.313450] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.313453] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.313519] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 2.313542] uhci_hcd 0000:00:1d.2: irq 11, io base 0x0000bf20
[ 2.313635] usb usb4: configuration #1 chosen from 1 choice
[ 2.313665] hub 4-0:1.0: USB hub found
[ 2.313677] hub 4-0:1.0: 2 ports detected
[ 2.313820] usbcore: registered new interface driver libusual
[ 2.313863] usbcore: registered new interface driver usbserial
[ 2.313878] USB Serial support registered for generic
[ 2.313895] usbcore: registered new interface driver usbserial_generic
[ 2.313897] usbserial: USB Serial Driver core
[ 2.313953] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.314182] i8042.c: Warning: Keylock active.
[ 2.316624] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.316632] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.316775] mice: PS/2 mouse device common for all mice
[ 2.317001] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 2.317020] rtc0: alarms up to one day, 114 bytes nvram
[ 2.317113] device-mapper: uevent: version 1.0.3
[ 2.317254] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@xxxxxxxxxx
[ 2.317312] device-mapper: multipath: version 1.0.5 loaded
[ 2.317316] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.317446] EISA: Probing bus 0 at eisa.0
[ 2.317482] EISA: Detected 0 cards.
[ 2.317517] cpuidle: using governor ladder
[ 2.317520] cpuidle: using governor menu
[ 2.318095] TCP cubic registered
[ 2.318173] NET: Registered protocol family 10
[ 2.318639] lo: Disabled Privacy Extensions
[ 2.318967] NET: Registered protocol family 17
[ 2.318999] Bluetooth: L2CAP ver 2.11
[ 2.319001] Bluetooth: L2CAP socket layer initialized
[ 2.319005] Bluetooth: SCO (Voice Link) ver 0.6
[ 2.319007] Bluetooth: SCO socket layer initialized
[ 2.319063] Bluetooth: RFCOMM socket layer initialized
[ 2.319076] Bluetooth: RFCOMM TTY layer initialized
[ 2.319078] Bluetooth: RFCOMM ver 1.10
[ 2.319145] IO APIC resources could be not be allocated.
[ 2.319192] Using IPI No-Shortcut mode
[ 2.319315] registered taskstats version 1
[ 2.319440] Magic number: 9:149:783
[ 2.319542] rtc_cmos 00:06: setting system clock to 2009-09-23 11:45:36 UTC (1253706336)
[ 2.319546] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.319548] EDD information not available.
[ 2.320413] Freeing unused kernel memory: 532k freed
[ 2.320526] Write protecting the kernel text: 4128k
[ 2.320565] Write protecting the kernel read-only data: 1532k
[ 2.323169] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 2.412918] compcache: Compressed swap size set to: 127324 KB
[ 2.413389] TLSF: pool: e089b000, init_size=16384, max_size=0, grow_size=16384
[ 2.843857] b43-pci-bridge 0000:02:02.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 2.847602] ssb: Sonics Silicon Backplane found on PCI device 0000:02:02.0
[ 2.850994] b44 0000:02:01.0: PCI INT A -> Link[LNKB] -> GSI 7 (level, low) -> IRQ 7
[ 2.876434] usb 3-1: new full speed USB device using uhci_hcd and address 2
[ 2.908138] ssb: Sonics Silicon Backplane found on PCI device 0000:02:01.0
[ 2.908170] b44.c:v2.0
[ 2.908211] ohci1394 0000:02:04.1: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 2.958048] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[faffb800-faffbfff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 2.968768] eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:0d:56:35:3e:14
[ 3.127088] usb 3-1: configuration #1 chosen from 2 choices
[ 3.253808] Adding 127320k swap on /dev/ramzswap0. Priority:100 extents:1 across:127320k
[ 3.888252] PM: Starting manual resume from disk
[ 3.888257] PM: Resume from partition 8:6
[ 3.888259] PM: Checking hibernation image.
[ 3.888536] PM: Resume from disk failed.
[ 3.925865] kjournald starting. Commit interval 5 seconds
[ 3.925883] EXT3-fs: mounted filesystem with ordered data mode.
[ 4.268208] ieee1394: Host added: ID:BUS[0-00:1023] GUID[464fc00005b2e810]
[ 13.092935] udev: starting version 141
[ 13.309502] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 13.374623] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:1b/device:1c/input/input5
[ 13.408409] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 14.188376] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 14.214353] USB Serial support registered for TI USB 3410 1 port adapter
[ 14.214396] USB Serial support registered for TI USB 5052 2 port adapter
[ 14.214445] ti_usb_3410_5052 3-1:1.0: TI USB 3410 1 port adapter converter detected
[ 14.214463] ti_usb_3410_5052: probe of 3-1:1.0 failed with error -5
[ 14.214478] usbcore: registered new interface driver ti_usb_3410_5052
[ 14.214482] ti_usb_3410_5052: v0.9:TI USB 3410/5052 Serial Driver
[ 14.219871] ti_usb_3410_5052 3-1:2.0: TI USB 3410 1 port adapter converter detected
[ 14.220073] usb 3-1: TI USB 3410 1 port adapter converter now attached to ttyUSB0
[ 14.263143] Linux agpgart interface v0.103
[ 14.302776] intel_rng: FWH not detected
[ 14.906189] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 15.081247] agpgart-intel 0000:00:00.0: Intel 830M Chipset
[ 15.088885] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe0000000
[ 15.153658] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[ 15.197548] cfg80211: Calling CRDA to update world regulatory domain
[ 15.293987] cfg80211: World regulatory domain updated:
[ 15.293994] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 15.293997] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 15.294000] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 15.294003] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 15.294005] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 15.294008] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 15.321733] yenta_cardbus 0000:02:04.0: CardBus bridge found [1028:0149]
[ 15.321752] yenta_cardbus 0000:02:04.0: Using CSCINT to route CSC interrupts to PCI
[ 15.321755] yenta_cardbus 0000:02:04.0: Routing CardBus interrupts to PCI
[ 15.321760] yenta_cardbus 0000:02:04.0: TI: mfunc 0x00001002, devctl 0x64
[ 15.329293] iTCO_vendor_support: vendor-support=0
[ 15.331746] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 15.331886] iTCO_wdt: Found a ICH4 TCO device (Version=1, TCOBASE=0x0860)
[ 15.331992] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 15.553124] yenta_cardbus 0000:02:04.0: ISA IRQ mask 0x0478, PCI irq 11
[ 15.553130] yenta_cardbus 0000:02:04.0: Socket status: 30000086
[ 15.553135] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #02 to #06
[ 15.553145] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge I/O window: 0xd000 - 0xefff
[ 15.553149] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xd000-0xefff: clean.
[ 15.553627] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge Memory window: 0xf6000000 - 0xfbffffff
[ 15.553630] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33ffffff
[ 15.621483] b43legacy-phy0: Broadcom 4306 WLAN found
[ 15.644034] b43legacy-phy0 debug: Found PHY: Analog 1, Type 2, Revision 1
[ 15.644056] b43legacy-phy0 debug: Found Radio: Manuf 0x17F, Version 0x2050, Revision 2
[ 15.668042] b43legacy-phy0 debug: Radio initialized
[ 15.669230] phy0: Selected rate control algorithm 'pid'
[ 15.857723] Broadcom 43xx-legacy driver loaded [ Features: PLRID, Firmware-ID: FW10 ]
[ 15.933987] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 7 (level, low) -> IRQ 7
[ 15.934217] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 15.980005] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[ 15.981089] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
[ 15.981535] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 15.981587] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 15.982118] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 16.036655] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x254ab1, caps: 0x804713/0x0
[ 16.077091] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[ 16.760037] intel8x0_measure_ac97_clock: measured 55280 usecs
[ 16.760041] intel8x0: clocking to 48000
[ 16.993121] lp: driver loaded but no devices found
[ 17.137857] Adding 1951856k swap on /dev/sda6. Priority:-1 extents:1 across:1951856k
[ 17.694022] EXT3 FS on sda5, internal journal
[ 18.801093] kjournald starting. Commit interval 5 seconds
[ 18.801728] EXT3 FS on sda7, internal journal
[ 18.801735] EXT3-fs: mounted filesystem with ordered data mode.
[ 19.074220] type=1505 audit(1253695553.252:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2015
[ 19.132594] type=1505 audit(1253695553.312:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2019
[ 19.132910] type=1505 audit(1253695553.312:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2019
[ 19.132992] type=1505 audit(1253695553.312:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2019
[ 19.133051] type=1505 audit(1253695553.312:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2019
[ 19.170964] type=1505 audit(1253695553.348:7): operation="profile_load" name="/usr/bin/freshclam" name2="default" pid=2024
[ 19.334490] type=1505 audit(1253695553.512:8): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2028
[ 19.334905] type=1505 audit(1253695553.512:9): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2028
[ 19.372356] type=1505 audit(1253695553.552:10): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2032
[ 19.894665] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 21.113625] nf_conntrack version 0.5.0 (8188 buckets, 32752 max)
[ 21.113862] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[ 21.113865] nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
[ 21.113867] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 26.442173] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 26.442177] Bluetooth: BNEP filters: protocol multicast
[ 26.481489] Bridge firewalling registered
[ 27.795903] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
[ 27.795911] pci 0000:01:00.0: PCI INT A -> Link[LNKE] -> GSI 11 (level, low) -> IRQ 11
[ 28.299636] ppdev: user-space parallel port driver
[ 28.337216] [drm] Initialized drm 1.1.0 20060810
[ 28.418834] [drm] Initialized radeon 1.29.0 20080528 on minor 0
[ 28.614353] agpgart-intel 0000:00:00.0: AGP 2.0 bridge
[ 28.614375] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
[ 28.614411] pci 0000:01:00.0: putting AGP V2 device into 4x mode
[ 29.060490] [drm] Setting GART location based on new memory map
[ 29.060501] [drm] Loading R100 Microcode
[ 29.060546] [drm] writeback test succeeded in 1 usecs
[ 31.822020] b44: eth0: BUG! Timeout waiting for bit 00000002 of register 42c to clear.
[ 31.829208] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 32.036227] input: b43legacy-phy0 as /devices/virtual/input/input8
[ 32.308043] b43legacy ssb0:0: firmware: requesting b43legacy/ucode4.fw
[ 32.405514] b43legacy-phy0 ERROR: Firmware file "b43legacy/ucode4.fw" not found or load failed.
[ 32.405522] b43legacy-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the correct firmware (version 3).
[ 32.425624] input: b43legacy-phy0 as /devices/virtual/input/input9
[ 32.752049] b43legacy ssb0:0: firmware: requesting b43legacy/ucode4.fw
[ 32.756467] b43legacy-phy0 ERROR: Firmware file "b43legacy/ucode4.fw" not found or load failed.
[ 32.756474] b43legacy-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the correct firmware (version 3).
Module Size Used by
nls_iso8859_1 12032 1
nls_cp437 13696 1
vfat 18816 1
fat 58272 1 vfat
rfkill_input 12800 0
binfmt_misc 16776 1
radeon 342816 2
drm 96296 3 radeon
ppdev 15620 0
bridge 56340 0
stp 10500 1 bridge
bnep 20224 2
nf_nat_ftp 10752 0
nf_conntrack_ftp 15652 1 nf_nat_ftp
nf_nat_irc 10240 0
nf_conntrack_irc 13220 1 nf_nat_irc
ipt_LOG 13700 12
xt_limit 10116 14
xt_state 10112 25
ipt_REDIRECT 9728 2
iptable_nat 13700 1
nf_nat 25876 4 nf_nat_ftp,nf_nat_irc,ipt_REDIRECT,iptable_nat
xt_tcpudp 11008 27
xt_owner 10624 3
nf_conntrack_ipv4 21388 28 iptable_nat,nf_nat
nf_conntrack 72008 8 nf_nat_ftp,nf_conntrack_ftp,nf_nat_irc,nf_conntrack_irc,xt_state,iptable_nat,nf_nat,nf_conntrack_ipv4
nf_defrag_ipv4 9984 1 nf_conntrack_ipv4
iptable_filter 10752 1
ip_tables 19472 2 iptable_nat,iptable_filter
x_tables 23044 8 ipt_LOG,xt_limit,xt_state,ipt_REDIRECT,iptable_nat,xt_tcpudp,xt_owner,ip_tables
lp 17156 0
parport 42220 2 ppdev,lp
joydev 18368 0
snd_intel8x0 37532 3
snd_ac97_codec 112292 1 snd_intel8x0
ac97_bus 9856 1 snd_ac97_codec
arc4 9856 2
snd_pcm_oss 46336 0
snd_mixer_oss 22656 1 snd_pcm_oss
ecb 10752 2
snd_pcm 82948 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
pcmcia 44748 0
snd_seq_dummy 10756 0
b43legacy 127004 0
snd_seq_oss 37760 0
snd_seq_midi 14336 0
snd_rawmidi 29696 1 snd_seq_midi
mac80211 217208 1 b43legacy
snd_seq_midi_event 15104 2 snd_seq_oss,snd_seq_midi
snd_seq 56880 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
iTCO_wdt 19108 0
iTCO_vendor_support 11652 1 iTCO_wdt
yenta_socket 32396 1
rsrc_nonstatic 19328 1 yenta_socket
cfg80211 38032 1 mac80211
snd_timer 29704 2 snd_pcm,snd_seq
snd_seq_device 14988 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
intel_agp 34108 1
psmouse 61972 0
led_class 12036 1 b43legacy
dcdbas 15264 0
pcmcia_core 43540 3 pcmcia,yenta_socket,rsrc_nonstatic
agpgart 42696 2 drm,intel_agp
ti_usb_3410_5052 33608 0
pcspkr 10496 0
serio_raw 13316 0
input_polldev 11912 1 b43legacy
snd 62628 16 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 15200 1 snd
snd_page_alloc 16904 2 snd_intel8x0,snd_pcm
video 25360 0
output 11008 1 video
shpchp 40212 0
ohci1394 38576 0
ieee1394 94660 1 ohci1394
b44 35984 0
ssb 41220 2 b43legacy,b44
mii 13312 1 b44
fbcon 46112 0
tileblit 10752 1 fbcon
font 16384 1 fbcon
bitblit 13824 1 fbcon
softcursor 9984 1 bitblit
compcache 12876 1
lzo_decompress 10880 1 compcache
lzo_compress 10880 1 compcache
tlsf 14092 1 compcache
