Concerning gnome-ppp, it is just a front end to wvdial. But its confiuration file is saved to .wvdial.conf in your home folder, Wvdial in contrast reads /etc/wvdial.conf. MarvS On Fri, Aug 14, 2009 at 10:05 PM, Cary Karell<karell@xxxxxxxxxxxxxx> wrote: > Hi, buddys > All ports and links for modem are finally created!!!! > I reinstalled everything, even Debian Lenny OS. I could install libasound2 > (you're right, MarvS, it was a mistyping), so I could install slmodemd > 2.9.11 > > I made some adjustments. > > and.... SUCCESS!!!! > > cary:/home/cary# wvdialconf /etc/wvdial.conf > Editing `/etc/wvdial.conf'. > > Scanning your serial ports for a modem. > > ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud > ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud > ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. > ttyS1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud > ttyS1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud > ttyS1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. > Modem Port Scan<*1>: S2 S3 WvModem<*1>: Cannot get information for serial > port. > ttySL0<*1>: ATQ0 V1 E1 -- OK > ttySL0<*1>: ATQ0 V1 E1 Z -- OK > ttySL0<*1>: ATQ0 V1 E1 S0=0 -- OK > ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK > ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK > ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK > ttySL0<*1>: Modem Identifier: ATI -- SmartLink Soft Modem > ttySL0<*1>: Speed 4800: AT -- OK > ttySL0<*1>: Speed 9600: AT -- OK > ttySL0<*1>: Speed 19200: AT -- OK > ttySL0<*1>: Speed 38400: AT -- OK > ttySL0<*1>: Speed 57600: AT -- OK > ttySL0<*1>: Speed 115200: AT -- OK > ttySL0<*1>: Speed 230400: AT -- OK > ttySL0<*1>: Speed 460800: AT -- OK > ttySL0<*1>: Max speed is 460800; that should be safe. > ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK > > Found a modem on /dev/ttySL0. > Modem configuration written to /etc/wvdial.conf. > ttySL0<Info>: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0" > > Everything works OK, but.... There is a connection problem. I want to use > gnome-ppp for connection, but gnome-ppp says, > > --> Ignoring malformed input line: ";Do NOT edit this file by hand!" > --> WvDial: Internet dialer version 1.60 > --> Cannot get information for serial port. > --> Initializing modem. > --> Sending: ATZ > ATZ > OK > --> Sending: ATZ > ATZ > OK > --> Sending: ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=90 > ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=90 > OK > --> Modem initialized. > --> Sending: ATM1L3DT8314040 > --> Waiting for carrier. > ATM1L3DT8314040 > BUSY > --> The line is busy. > --> Disconnecting at Sat Aug 15 03:15:25 2009 > > Init1 line is disappeared in gnome-ppp (I don't know why), that is probably > the cause. > How could I fix this? > > Regards, > Cary. > > > -- > > Este mensaje le ha llegado mediante el servicio de correo electronico que > ofrece Infomed para respaldar el cumplimiento de las misiones del Sistema > Nacional de Salud. La persona que envia este correo asume el compromiso de > usar el servicio a tales fines y cumplir con las regulaciones establecidas > > Infomed: http://www.sld.cu/ >
