Cary The startup command to use is: # /etc/init.d/sl-modem-daemon restart The /etc/modprobe.d/sl-modem-daemon.conf is merely one of the configuration files it reads. If all else is OK, the startup command also run at bootup, will do what Antonio directs below. It may be necessary to do between successive dialouts/pppd usages: # /etc/init.d/sl-modem-daemon restart MarvS On Wed, Aug 12, 2009 at 8:03 AM, Antonio Olivares<olivares14031@xxxxxxxxx> wrote: > Cary, > > Please try the following: > > $ sudo mkdir -p /dev > $ sudo mknod -m 600 /dev/slamr0 c 242 0 ; > $ sudo modprobe ungrab-winmodem > $ sudo modprobe slamr > $ sudo slmodemd -c USA /dev/slamr0 > > Let us know if you achieve success. > > Regards, > > Antonio > > On 8/11/09, Cary Karell <karell@xxxxxxxxxxxxxx> wrote: >> Hello, everybody. I'm needing help for installing my modem in Lenny >> (stable). Actually, I could mount the drivers into kernel, but the >> dynamic creation of ports and symbolic links was unsuccessful. >> I would like to know what else I should do. >> >> Here is a couple of screenshots for errors. >> >> Regards, >> Cary >> >> >> >> >> -- >> >> Este mensaje le ha llegado mediante el servicio de correo electronico que >> ofrece Infomed para respaldar el cumplimiento de las misiones del Sistema >> Nacional de Salud. La persona que envia este correo asume el compromiso de >> usar el servicio a tales fines y cumplir con las regulaciones establecidas >> >> Infomed: http://www.sld.cu/ >> >
