Hooman,
scanModem reports that your modem is an HCF/HSF modem supported? by
linuxant. Please follow the instructions provided :
Predictive diagnostics for card in bus 02:03.0:
Modem chipset detected on
NAME="Communication controller: Conexant Systems, Inc. HCF V90 56k
Data/Fax/Voice/Spkp PCI Modem "
CLASS=0780
PCIDEV=14f1:1085
SUBSYS=14f1:1085
IRQ=11
IDENT=HCF.HSF
For candidate modem in: 02:03.0
0780 Communication controller: Conexant Systems, Inc. HCF V90 56k
Data/Fax/Voice/Spkp PCI Modem
Primary device ID: 14f1:1085
Support type needed or chipset: HCF.HSF
For owners of a Dell PCs with Conexant HSF modems, a driver source
package with full speed enabled is available, but requires driver
compiling. Read DOCs/Conexant.txt
14f1:1085 could be either a HSF or HCF Conexant modem, because of ambiguous
use of the PCI ID by modem assemblers. First try the hcfpcimodem package.
If the installation aborts, then use the hsfmodem package. Read
DOCs/Conexant.txt
for details and Modem/DOCs/YourSystem.txt for follow through guidance.
From http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php
download hsfmodem-7.80.02.02full_k2.6.27_7_generic_ubuntu_i386.deb.zip
Under Linux unpack with:
$ unzip hsfmodem*.zip
Then install with:
$ sudo dpkg -i hsfmodem*.deb
Subsequently, the modem should be found with
$ sudo wvdialconf /etc/wvdial.conf
Edit in your personal information with:
$ sudo gedit /etc/wvdial.conf
and try dialing out with:
$ sudo wvdial.
See DOCs/Testing.txt for details.
Regards,
Antonio
On 8/6/09, barf barf <barfe.aval@xxxxxxxxx> wrote:
> hi
> please help me what i must do exactlly
>
> Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List
> Server,
> as HTML can contain viruses. Use as the email Subject Line:
> YourName, YourCountry kernel 2.6.27-7-generic
> With this Subject Line cogent experts will be alerted, and useful
> case names left in the Archive.
> YourCountry will enable Country specific guidance. Linux experts in
> YourCountry
> can be found through: http://www.linux.org/groups/index.html.
> They will know your Country's modem code, which may be essential for
> dialup service.
> Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an
> Internet Provider mail filters.
> So in a day, also check the Archived responses at http://www.linmodems.org
> -------------------------- System information ----------------------------
> CPU=i686,
> Linux version 2.6.27-7-generic (buildd@rothera) (gcc version 4.3.2
> (Ubuntu 4.3.2-1ubuntu10) ) #1 SMP Fri Oct 24 06:42:44 UTC 2008
> scanModem update of: 2009_07_17
>
> There are no blacklisted modem drivers in /etc/modprobe* files
> Potentially useful modem drivers now loaded are:
>
>
> Attached USB devices are:
> ID 09da:000a A4 Tech Co., Ltd Port Mouse
> ID 10d6:1101 Actions Semiconductor Co., Ltd D-Wave 2GB MP4 Player
> ID 03eb:0902 Atmel Corp.
> If a cellphone is not detected, see
> http://ubuntuforums.org/archive/index.php/t-878554.html
> A sample report is:
> http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html
>
> If a USB modem or cellphone is attached and was not detected, please
> provide available information in your request to discuss@xxxxxxxxxxxxx
>
> For candidate card in slot 02:03.0, firmware information and bootup
> diagnostics are:
> PCI slot PCI ID SubsystemID Name
> ---------- --------- --------- --------------
> 02:03.0 14f1:1085 14f1:1085 Communication controller: Conexant
> Systems, Inc. HCF V90 56k Data/Fax/Voice/Spkp PCI Modem
>
> Modem interrupt assignment and sharing:
> --- Bootup diagnostics for card in PCI slot 02:03.0 ----
> [ 1.028918] PCI: 0000:02:03.0 reg 10 32bit mmio: [e8000000, e800ffff]
> [ 1.028931] PCI: 0000:02:03.0 reg 14 io port: [c400, c407]
> [ 1.028979] pci 0000:02:03.0: supports D1
> [ 1.028984] pci 0000:02:03.0: supports D2
> [ 1.028990] pci 0000:02:03.0: PME# supported from D0 D1 D2 D3hot
> [ 1.029000] pci 0000:02:03.0: PME# disabled
>
> The PCI slot 02:03.0 of the modem card may be disabled early in
> a bootup process, but then enabled later. If modem drivers load
> but the modem is not responsive, read DOCs/Bootup.txt about possible
> fixes.
> Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
> if help is needed.
>
>
> === Finished firmware and bootup diagnostics, next deducing cogent software.
> ===
>
> Predictive diagnostics for card in bus 02:03.0:
> Modem chipset detected on
> NAME="Communication controller: Conexant Systems, Inc. HCF V90 56k
> Data/Fax/Voice/Spkp PCI Modem "
> CLASS=0780
> PCIDEV=14f1:1085
> SUBSYS=14f1:1085
> IRQ=11
> IDENT=HCF.HSF
>
> For candidate modem in: 02:03.0
> 0780 Communication controller: Conexant Systems, Inc. HCF V90 56k
> Data/Fax/Voice/Spkp PCI Modem
> Primary device ID: 14f1:1085
> Support type needed or chipset: HCF.HSF
>
>
>
> For owners of a Dell PCs with Conexant HSF modems, a driver source
> package with full speed enabled is available, but requires driver
> compiling. Read DOCs/Conexant.txt
>
> 14f1:1085 could be either a HSF or HCF Conexant modem, because of ambiguous
> use of the PCI ID by modem assemblers. First try the hcfpcimodem package.
> If the installation aborts, then use the hsfmodem package. Read
> DOCs/Conexant.txt
> for details and Modem/DOCs/YourSystem.txt for follow through guidance.
>
> From http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php
> download hsfmodem-7.80.02.02full_k2.6.27_7_generic_ubuntu_i386.deb.zip
> Under Linux unpack with:
> $ unzip hsfmodem*.zip
> Then install with:
> $ sudo dpkg -i hsfmodem*.deb
> Subsequently, the modem should be found with
> $ sudo wvdialconf /etc/wvdial.conf
> Edit in your personal information with:
> $ sudo gedit /etc/wvdial.conf
> and try dialing out with:
> $ sudo wvdial.
> See DOCs/Testing.txt for details.
>
> The directions following below need only be pursued, if the above
> procedures are not adequate.
>
> Start at http://www.linuxant.com/drivers/hsf/downloads-license.php to find
> the
> hsfmodem package matching your System. For several Linux distros, there are
> precompiled drivers matched to specific kernels. These have within the
> FileName,
> your KernelVersion: 2.6.27_7_generic
> They can be found through
> http://www.linuxant.com/drivers/hsf/full/downloads.php
> A more precise location may be given a few paragraphs below.
> If an EXACT Match with your your KernelVersion is not found, one of the
> "Generic packages with source" near the bottom of the page must be used.
> Downloaded packages must be moved into the Linux partition (home folder is
> OK)
> and unzipped with:
> unzip hsf*.zip
> The installation command for a .deb suffic packages is, with root/adm
> permission:
> sudo dpkg -i hsf*.deb
> while for .rpm suffix it is, with:
> rpm -i hsf*.rpm
> Read DOCs/Conexant.txt
>
> Writing DOCs/Conexant.txt
>
>
> Completed candidate modem analyses.
>
> The base of the UDEV device file system is: /dev/.udev
>
> Versions adequately match for the compiler installed: 4.3.2
> and the compiler used in kernel assembly: 4.3.2
>
> The patch utility is needed and is needed for compiling ALSA drivers,
> and possibly others.
>
>
> Minimal compiling resources appear complete:
> make utility - /usr/bin/make
> Compiler version 4.3
> linuc_headers base folder /lib/modules/2.6.27-7-generic/build
>
> However some compilations and executable functions may need additional
> files,
> in the FileNames.h (so called kernel "h"eaders) collection installed
> in /usr/include/ .
> For martian_modem, additional required packages are needed. The also
> required headers of package libc6 are commonly installed by default.
> Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev
> packages, for kernels 2.6.24 and later versions.
> In not included on your install CD, search for them at
> http://packages.ubuntu.com
> or comparable Repository for other Linux distros.
> When compiling ALSA drivers, the utility "patch" will also be needed.
>
>
>
>
> If a driver compilation fails, with message including some lack of
> some FileName.h (stdio.h for example), then
> Some additional kernel-header files need installation to /usr/include.
> The minimal additional packages are libc6-dev
> and any of its dependents, under Ubuntu linux-libc-dev
>
> If an alternate ethernet connection is available,
> $ apt-get update
> $ apt-get -s install linux-kernel-devel
> will install needed packages.
> For Debian/Ubuntu related distributions, run the following command to
> display the needed package list:
>
> Otherwise packages have to be found through http://packages.ubuntu.com
> Once downloaded and transferred into a Linux partition,
> they can be installed alltogether with:
> $ sudo dpkg -i *.deb
>
>
> Checking pppd properties:
> -rwsr-xr-- 1 root dip 273064 2008-10-15 18:51 /usr/sbin/pppd
>
> In case of an "error 17" "serial loopback" problem, see:
> http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
>
> To enable dialout without Root permission do:
> $ su - root (not for Ubuntu)
> sudo chmod a+x /usr/sbin/pppd
> or under Ubuntu related Linuxes
> sudo chmod a+x /usr/sbin/pppd
>
> Checking settings of: /etc/ppp/options
> asyncmap 0
> noauth
> crtscts
> lock
> hide-password
> modem
> proxyarp
> lcp-echo-interval 30
> lcp-echo-failure 4
> noipx
>
> In case of a message like:
> Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
> see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
>
>
> Don't worry about the following, it is for experts should trouble
> shooting be necessary.
> ==========================================================
>
> Checking for modem support lines:
> --------------------------------------
> /device/modem symbolic link:
> slmodemd created symbolic link /dev/ttySL0:
> Within /etc/udev/ files:
>
> Within /etc/modprobe.conf files:
> /etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
> /etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
> /etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to
> blacklist unwanted modem drivers
> /etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
> /etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
> Within any ancient /etc/devfs files:
>
> Within ancient kernel 2.4.n /etc/module.conf files:
>
> --------- end modem support lines --------
>
