Please Help
I have been working on getting my modem to work for about 2 weeks now
On Fedora 11 and have not ask any one for help until now.
I installed slmodem-2.9.11-20090222.tar.gz the first time and could not
Get it to create TTY as `/dev/pts/1' but I did not try slmodemd -c USA
--alsa hw:0
But I did try about all the outer one's like modem:1 .....
I also had to install ungrab-winmodem too
So I uninstalled slmodem-2.9.11-20090222.tar.gz
Then I installed SLMODEMD_gcc4.4_alsa1.0.18 and finely
I got the modem to query. But still cannot get it to connect
HERE is some outputs of the command port also have a output of dmesg too.
I hope this is not too much info but I'm tired of booting back to windows
To read help files on the internet.
Thanks And God Bless!
-------------------------------------------------------------
[root@localhost david]# slmodemd -c USA --alsa hw:0
error: mixer setup: Off-hook switch not found for card hw:0
SmartLink Soft Modem: version 2.9.11 Jun 11 2009 06:50:05
symbolic link `/dev/ttySL0' -> `/dev/pts/1' created.
modem `hw:0' created. TTY is `/dev/pts/1'
Use `/dev/ttySL0' as modem device, Ctrl+C for termination.
error: cannot set channels for playback: Invalid argument
error: cannot set channels for playback: Invalid argument
After starting wvdial or Kppp This is in the command port
(error: cannot set channels for playback: Invalid argument)
--------------------------------------------------------------------
Here's the wvdial report
[root@localhost /]# wvdial
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initia
lizing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Sending: AT+GCI=b5
AT+GCI=b5
OK
--> Modem initialized.
--> Sending: ATDT543-7771
--> Waiting for carrier.
ATDT543-7771
NO CARRIER
ERROR
--> No Carrier! Trying again.
--> Sending: ATDT543-7771
--> Waiting for carrier.
ATDT543-7771
NO CARRIER
ERROR
--> No Carrier! Trying again.
--> Sending: ATDT543-7771
--> Waiting for carrier.
ATDT543-7771
NO CARRIER
ERROR
--> No Carrier! Trying again.
----------------------------------------------------------------------------
---
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: SI7012 [SiS SI7012], device 0: Intel ICH [SiS SI7012]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 2: Modem [SiS SI7013 Modem], device 0: Intel ICH - Modem [SiS SI7013
Modem - Modem]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 3: CMI8738 [C-Media CMI8738], device 0: CMI8738-MC6 [C-Media PCI
DAC/ADC]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 3: CMI8738 [C-Media CMI8738], device 1: CMI8738-MC6 [C-Media PCI 2nd
DAC]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 3: CMI8738 [C-Media CMI8738], device 2: CMI8738-MC6 [C-Media PCI
IEC958]
Subdevices: 1/1
Subdevice #0: subdevice #0
---------------------------------------------------------------------------
dmesg#
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.29.4-167.fc11.i686.PAE
(mockbuild@xxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.4.0 20090506 (Red Hat
4.4.0-4) (GCC) ) #1 SMP Wed May 27 17:28:22 EDT 2009
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
DMI 2.2 present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
last_pfn = 0x1fff0 max_arch_pfn = 0x1000000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
kernel direct mapping tables up to 1fff0000 @ 10000-17000
Using x86 segment limits to approximate NX protection
RAMDISK: 1fcce000 - 1ffdf7ca
ACPI: RSDP 000F75C0, 0014 (r0 AWARD )
ACPI: RSDT 1FFF3000, 002C (r1 AWARD AWRDACPI 42302E31 AWRD 0)
ACPI: FACP 1FFF3040, 0074 (r1 AWARD AWRDACPI 42302E31 AWRD 0)
FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
ACPI: DSDT 1FFF30C0, 3F30 (r1 AWARD AWRDACPI 1000 MSFT 100000D)
ACPI: FACS 1FFF0000, 0040
ACPI: APIC 1FFF7000, 0068 (r1 AWARD AWRDACPI 42302E31 AWRD 0)
ACPI: Local APIC address 0xfee00000
0MB HIGHMEM available.
511MB LOWMEM available.
mapped low ram: 0 - 1fff0000
low ram: 00000000 - 1fff0000
bootmap 00013000 - 00017000
(9 early reservations) ==> bootmem [0000000000 - 001fff0000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 -
0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 -
0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 -
0000007000]
#3 [0000400000 - 0000a34594] TEXT DATA BSS ==> [0000400000 -
0000a34594]
#4 [001fcce000 - 001ffdf7ca] RAMDISK ==> [001fcce000 -
001ffdf7ca]
#5 [0000a35000 - 0000a3f000] INIT_PG_TABLE ==> [0000a35000 -
0000a3f000]
#6 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 -
0000100000]
#7 [0000010000 - 0000013000] PGTABLE ==> [0000010000 -
0000013000]
#8 [0000013000 - 0000017000] BOOTMAP ==> [0000013000 -
0000017000]
found SMP MP-table at [c00f5c60] 000f5c60
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x0001fff0
HighMem 0x0001fff0 -> 0x0001fff0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0001fff0
On node 0 totalpages: 130943
free_area_init_node: node 0, pgdat c08bdb80, node_mem_map c1000200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 992 pages used for memmap
Normal zone: 125968 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 1 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Allocating 45056 bytes of per cpu data
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129919
Kernel command line: ro root=/dev/mapper/VolGroup-lv_root rhgb quiet
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 8192 bytes)
Fast TSC calibration using PIT
Detected 2405.804 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
allocated 2620800 bytes of page_cgroup
please try cgroup_disable=memory option if you don't want
Memory: 506784k/524224k available (3179k kernel code, 16792k reserved, 1935k
data, 436k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xffc57000 - 0xfffff000 (3744 kB)
pkmap : 0xff800000 - 0xffa00000 (2048 kB)
vmalloc : 0xe07f0000 - 0xff7fe000 ( 496 MB)
lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
.init : 0xc0906000 - 0xc0973000 ( 436 kB)
.data : 0xc071ae6a - 0xc08feb78 (1935 kB)
.text : 0xc0400000 - 0xc071ae6a (3179 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=12, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Calibrating delay loop (skipped), value calculated using timer frequency..
4811.60 BogoMIPS (lpj=2405804)
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 128K
CPU: Hyper-Threading is disabled
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20081204
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 18381 entries in 73 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Celeron(R) CPU 2.40GHz stepping 07
Brought up 1 CPUs
Total of 1 processors activated (4811.60 BogoMIPS).
sizeof(vma)=88 bytes
sizeof(page)=32 bytes
sizeof(inode)=340 bytes
sizeof(dentry)=132 bytes
sizeof(ext3inode)=492 bytes
sizeof(buffer_head)=56 bytes
sizeof(skbuff)=180 bytes
sizeof(task_struct)=3228 bytes
CPU0 attaching NULL sched-domain.
net_namespace: 1064 bytes
Booting paravirtualized kernel on bare hardware
regulator: core version 0.5
Time: 8:14:29 Date: 07/21/09
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfb8f0, last bus=1
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: reg 10 32bit mmio: [0xe0000000-0xe7ffffff]
pci 0000:00:02.0: Enabling SiS 96x SMBus
pci 0000:00:02.1: reg 20 io port: [0x10c0-0x10df]
pci 0000:00:02.5: reg 10 io port: [0x1f0-0x1f7]
pci 0000:00:02.5: reg 14 io port: [0x3f4-0x3f7]
pci 0000:00:02.5: reg 18 io port: [0x170-0x177]
pci 0000:00:02.5: reg 1c io port: [0x374-0x377]
pci 0000:00:02.5: reg 20 io port: [0x4000-0x400f]
pci 0000:00:02.5: supports D2
pci 0000:00:02.5: PME# supported from D3cold
pci 0000:00:02.5: PME# disabled
pci 0000:00:02.6: reg 10 io port: [0xd400-0xd4ff]
pci 0000:00:02.6: reg 14 io port: [0xd800-0xd87f]
pci 0000:00:02.6: supports D1 D2
pci 0000:00:02.6: PME# supported from D3hot D3cold
pci 0000:00:02.6: PME# disabled
pci 0000:00:02.7: reg 10 io port: [0xdc00-0xdcff]
pci 0000:00:02.7: reg 14 io port: [0xe000-0xe07f]
pci 0000:00:02.7: supports D1 D2
pci 0000:00:02.7: PME# supported from D3hot D3cold
pci 0000:00:02.7: PME# disabled
pci 0000:00:03.0: reg 10 32bit mmio: [0xec000000-0xec000fff]
pci 0000:00:03.1: reg 10 32bit mmio: [0xec001000-0xec001fff]
pci 0000:00:03.2: reg 10 32bit mmio: [0xec002000-0xec002fff]
pci 0000:00:03.3: reg 10 32bit mmio: [0xec003000-0xec003fff]
pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
pci 0000:00:03.3: PME# disabled
pci 0000:00:04.0: reg 10 io port: [0xe400-0xe4ff]
pci 0000:00:04.0: reg 14 32bit mmio: [0xec004000-0xec004fff]
pci 0000:00:04.0: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:00:04.0: supports D1 D2
pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:09.0: reg 10 32bit mmio: [0xe8000000-0xe8003fff]
pci 0000:00:09.0: reg 14 32bit mmio: [0xe9000000-0xe97fffff]
pci 0000:00:09.0: reg 18 32bit mmio: [0xea000000-0xea7fffff]
pci 0000:00:09.0: reg 30 32bit mmio: [0x000000-0x00ffff]
pci 0000:00:0c.0: reg 10 io port: [0xe800-0xe8ff]
pci 0000:00:0c.0: supports D1 D2
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 14 15)
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
system 00:00: iomem range 0xf0000-0xf3fff could not be reserved
system 00:00: iomem range 0xf4000-0xf7fff could not be reserved
system 00:00: iomem range 0xf8000-0xfbfff could not be reserved
system 00:00: iomem range 0xfc000-0xfffff could not be reserved
system 00:00: iomem range 0x1fff0000-0x1fffffff could not be reserved
system 00:00: iomem range 0xffff0000-0xffffffff has been reserved
system 00:00: iomem range 0x0-0x9ffff could not be reserved
system 00:00: iomem range 0x100000-0x1ffeffff could not be reserved
system 00:00: iomem range 0xffee0000-0xffefffff has been reserved
system 00:00: iomem range 0xfffe0000-0xfffeffff has been reserved
system 00:00: iomem range 0xfec00000-0xfecfffff has been reserved
system 00:00: iomem range 0xfee00000-0xfeefffff has been reserved
system 00:02: ioport range 0x4d0-0x4d1 has been reserved
system 00:02: ioport range 0x800-0x805 has been reserved
system 00:02: ioport range 0x290-0x297 has been reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: disabled
pci 0000:00:01.0: MEM window: disabled
pci 0000:00:01.0: PREFETCH window: disabled
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 mem: [0x0-0x0]
pci_bus 0000:01: resource 1 mem: [0x0-0x0]
pci_bus 0000:01: resource 2 mem: [0x0-0x0]
pci_bus 0000:01: resource 3 mem: [0x0-0x0]
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs... it is
Freeing initrd memory: 3141k freed
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
type=2000 audit(1248164069.645:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 996
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:09.0: Boot video device
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
acpiphp_glue: can't get bus number, assuming 0
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
ACPI: Power Button (CM) [PWRB]
input: Sleep Button (CM) as
/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
ACPI: Sleep Button (CM) [FUTS]
fan PNP0C0B:00: registered as cooling_device0
ACPI: Fan [FAN] (on)
processor ACPI_CPU:00: registered as cooling_device1
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (40 C)
isapnp: Scanning for PnP cards...
Switched to high resolution mode on CPU 0
isapnp: No Plug & Play device found
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
agpgart-sis 0000:00:00.0: SiS chipset [1039/0648]
agpgart-sis 0000:00:00.0: AGP aperture is 128M @ 0xe0000000
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
serial 0000:00:02.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
serial 0000:00:02.6: PCI INT C disabled
brd: module loaded
loop: module loaded
Fixed MDIO Bus: probed
input: Macintosh mouse button emulation as /devices/virtual/input/input3
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:03.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:03.3: EHCI Host Controller
ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:03.3: cache line size of 128 is not supported
ehci_hcd 0000:00:03.3: irq 23, io mem 0xec003000
ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.29.4-167.fc11.i686.PAE ehci_hcd
usb usb1: SerialNumber: 0000:00:03.3
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ohci_hcd 0000:00:03.0: OHCI Host Controller
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:03.0: irq 20, io mem 0xec000000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.29.4-167.fc11.i686.PAE ohci_hcd
usb usb2: SerialNumber: 0000:00:03.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
ohci_hcd 0000:00:03.1: OHCI Host Controller
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:03.1: irq 21, io mem 0xec001000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.29.4-167.fc11.i686.PAE ohci_hcd
usb usb3: SerialNumber: 0000:00:03.1
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ohci_hcd 0000:00:03.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
ohci_hcd 0000:00:03.2: OHCI Host Controller
ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:03.2: irq 22, io mem 0xec002000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.29.4-167.fc11.i686.PAE ohci_hcd
usb usb4: SerialNumber: 0000:00:03.2
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, 242 bytes nvram
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised:
dm-devel@xxxxxxxxxx
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
nf_conntrack version 0.5.0 (8191 buckets, 32764 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
Magic number: 1:598:220
dmi id: hash matches
Initalizing network drop monitor service
Freeing unused kernel memory: 436k freed
Write protecting the kernel read-only data: 1468k
input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input4
usb 1-1: new high speed USB device using ehci_hcd and address 2
psmouse serio1: ID: 10 00 64<6>usb 1-1: New USB device found, idVendor=1221,
idProduct=3234
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: Flash Disk
usb 1-1: Manufacturer: USB2.0
usb 1-1: SerialNumber: 000000001338
usb 1-1: configuration #1 chosen from 1 choice
pata_sis 0000:00:02.5: version 0.5.2
pata_sis 0000:00:02.5: PCI INT A -> GSI 16 (level, low) -> IRQ 16
scsi0 : pata_sis
scsi1 : pata_sis
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x4000 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x4008 irq 15
input: ImPS/2 Generic Wheel Mouse as
/devices/platform/i8042/serio1/input/input5
ata1.00: ATA-6: ST380023A, 3.33, max UDMA/100
ata1.00: 156301488 sectors, multi 16: LBA
ata1.01: ATA-4: ST330621A, 3.53, max UDMA/100
ata1.01: 58633344 sectors, multi 16: LBA
ata1.00: configured for UDMA/100
ata1.01: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA ST380023A 3.33 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sda: sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 0:0:1:0: Direct-Access ATA ST330621A 3.53 PQ: 0 ANSI: 5
sd 0:0:1:0: [sdb] 58633344 512-byte hardware sectors: (30.0 GB/27.9 GiB)
sd 0:0:1:0: [sdb] Write Protect is off
sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sd 0:0:1:0: [sdb] 58633344 512-byte hardware sectors: (30.0 GB/27.9 GiB)
sd 0:0:1:0: [sdb] Write Protect is off
sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sdb: sdb1 sdb2
sd 0:0:1:0: [sdb] Attached SCSI disk
sd 0:0:1:0: Attached scsi generic sg1 type 0
ata2.00: ATAPI: SAMSUNG CDRW/DVD SM-352B, T803, max UDMA/33
ata2.01: ATAPI: CDD4801 CD-R/RW, C1.3, max MWDMA2
ata2.00: configured for UDMA/33
ata2.01: configured for PIO4
scsi 1:0:0:0: CD-ROM SAMSUNG CDRW/DVD SM-352B T803 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 1x/52x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg2 type 5
scsi 1:0:1:0: CD-ROM PHILIPS CDD4801 CD-R/RW C1.3 PQ: 0 ANSI: 5
sr1: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
sr 1:0:1:0: Attached scsi CD-ROM sr1
sr 1:0:1:0: Attached scsi generic sg3 type 5
EXT4-fs: barriers enabled
kjournald2 starting: pid 59, dev dm-0:8, commit interval 5 seconds
EXT4-fs: delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs: mounted filesystem dm-0 with ordered data mode
type=1404 audit(1248164072.960:2): enforcing=1 old_enforcing=0
auid=4294967295 ses=4294967295
SELinux: 8192 avtab hash slots, 123724 rules.
SELinux: 8192 avtab hash slots, 123724 rules.
SELinux: 8 users, 11 roles, 2722 types, 127 bools, 1 sens, 1024 cats
SELinux: 74 classes, 123724 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev dm-0, type ext4), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses
genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1248164073.395:3): policy loaded auid=4294967295
ses=4294967295
udev: starting version 141
parport_pc 00:0a: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x10c0
gameport: NS558 PnP Gameport is pnp00:0e/gameport0, io 0x201, speed 764kHz
sis900.c: v1.08.10 Apr. 2 2006
sis900 0000:00:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1.
0000:00:04.0: Using transceiver found at address 1 as default
eth0: SiS 900 PCI Fast Ethernet at 0xe400, IRQ 19, 00:0a:e6:97:6b:7a
Initializing USB Mass Storage driver...
scsi2 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
input: PC Speaker as /devices/platform/pcspkr/input/input6
Intel ICH Modem 0000:00:02.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Intel ICH 0000:00:02.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
intel8x0_measure_ac97_clock: measured 50921 usecs
intel8x0: clocking to 48000
matroxfb 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
matroxfb: Matrox Mystique (PCI) detected
PInS memtype = 0
matroxfb: MTRR's turned on
matroxfb: 640x480x8bpp (virtual: 640x3276)
matroxfb: framebuffer at 0xE9000000, mapped to 0xe1800000, size 2097152
fbcon: MATROX (fb0) is primary device
Console: switching to mono frame buffer device 80x30
fb0: MATROX frame buffer device
C-Media PCI 0000:00:0c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ppdev: user-space parallel port driver
usb-storage: device scan complete
scsi 2:0:0:0: Direct-Access USB2.0 Flash Disk 2.20 PQ: 0 ANSI: 2
sd 2:0:0:0: [sdc] 16777216 512-byte hardware sectors: (8.58 GB/8.00 GiB)
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 0b 00 00 08
sd 2:0:0:0: [sdc] Assuming drive cache: write through
sd 2:0:0:0: [sdc] 16777216 512-byte hardware sectors: (8.58 GB/8.00 GiB)
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 0b 00 00 08
sd 2:0:0:0: [sdc] Assuming drive cache: write through
sdc:
sd 2:0:0:0: [sdc] Attached SCSI removable disk
sd 2:0:0:0: Attached scsi generic sg4 type 0
device-mapper: multipath: version 1.0.5 loaded
EXT4 FS on dm-0, internal journal on dm-0:8
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdb1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sdb1, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
swap_cgroup: uses 1024 bytes of vmalloc for pointer array space and 1048576
bytes to hold mem_cgroup pointers on swap
swap_cgroup can be disabled by noswapaccount boot option.
Adding 1048568k swap on /dev/mapper/VolGroup-lv_swap. Priority:-1 extents:1
across:1048568k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses
genfs_contexts
p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
JBD: barrier-based sync failed on dm-0:8 - disabling barriers
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.13
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bridge firewalling registered
virbr0: starting userspace STP failed, starting kernel STP
SELinux: initialized (dev proc, type proc), uses genfs_contexts
lo: Disabled Privacy Extensions
SELinux: initialized (dev proc, type proc), uses genfs_contexts
eth0: Media Link Off
ADDRCONF(NETDEV_UP): eth0: link is not ready
virbr0: no IPv6 routers present
fuse init (API version 7.11)
SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
SELinux: initialized (dev sdc, type vfat), uses genfs_contexts
Thanks And:
God Bless You!
