Dear Ryan,
Could you send me your /var/log/messages file ?
Can you also send the result of the
$ ls -l /dev/modem
$ ls /dev/537ep*
commands ?
-
http://vouters.dyndns.org:8080/
Philippe Vouters (Fontainebleau/France)
Le lundi 29 juin 2009 à 10:54 +0100, Ryan a écrit :
> Ok Philippe.
>
> Heres what I did:
>
> ryan@Ryan:~$ dmesg | grep 537ep
> ryan@Ryan:~$ dmesg | grep -i 537EP
> [ 20.917667] Intel 537EP card found
> ryan@Ryan:~$ stty -F /dev/modem -a
> stty: /dev/modem: Bad address
>
>
>
> Does that help at all?
> I am not getting anything like your responses.
>
> Ryan
>
>
> ----- Original Message -----
> From: "Philippe Vouters" <Philippe.Vouters@xxxxxxxxxxx>
> To: "Ryan" <ryanmckeown@xxxxxxxxxxx>
> Cc: "Linmodems" <discuss@xxxxxxxxxxxxx>; "Marvin Stodolsky"
> <marvin.stodolsky@xxxxxxxxx>
> Sent: Sunday, June 28, 2009 5:18 PM
> Subject: Re: Can you try this coredrv.c ?
>
>
> > Dear Ryan,
> >
> > Providing that with the command:
> > $ dmesg | grep -i 537EP
> > you can read the following strings:
> > "
> > 537ep:softcore_init_struct: driver serial already allocated device.
> > "
> > AND
> > "
> > 537ep:softcore_init_struct: Unregistering serial driver.
> > "
> > then you may give efax a try. To activate efax, you would:
> > $ cd efax/
> > $ ./efax -vewinchmart
> > Does efax work correctly without crashing your computer ????
> >
> > You may also try the following command:
> >
> > $ stty -F /dev/modem -a
> >
> > If the 537EP driver actually answers, here is what this should tell:
> >
> > [philippe@victor ~]$ stty -F /dev/modem -a
> > speed 19200 baud; rows 0; columns 0; line = 0;
> > intr = ^C; quit = ^\; erase = ^?; kill = ^U; eof = ^D; eol = <undef>;
> > eol2 = <undef>; swtch = <undef>; start = ^Q; stop = ^S; susp = ^Z; rprnt
> > = ^R;
> > werase = ^W; lnext = ^V; flush = ^O; min = 1; time = 0;
> > -parenb -parodd cs8 -hupcl -cstopb cread clocal crtscts
> > -ignbrk -brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr -icrnl
> > -ixon -ixoff
> > -iuclc -ixany -imaxbel -iutf8
> > -opost -olcuc -ocrnl -onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0
> > bs0 vt0 ff0
> > -isig -icanon -iexten -echo -echoe -echok -echonl -noflsh -xcase -tostop
> > -echoprt
> > -echoctl -echoke
> >
> > -
> > http://vouters.dyndns.org:8080/
> > Philippe Vouters (Fontainebleau/France)
> >
> >
> > Le dimanche 28 juin 2009 à 16:14 +0100, Ryan a écrit :
> >> Hey, don't worry yourself about it.
> >>
> >> Ok. I think we are getting somewhere now at last...
> >>
> >> Heres what my terminal looks like:
> >> ryan@Ryan:~$ grep gawk intel-536-537/*
> >> intel-536-537/makefile_537:MODEM_TYPE=$(shell $(LSPCI)/lspci -n | gawk
> >> '{ \
> >> ryan@Ryan:~$ gedit intel-536-537/makefile_537
> >> ryan@Ryan:~$ grep gawk intel-536-537/*/*
> >> ryan@Ryan:~$ grep gawk intel-536-537/*
> >> ryan@Ryan:~$ cd intel-536-537/
> >> ryan@Ryan:~/intel-536-537$ make 537
> >> cd coredrv; make clean
> >> make[1]: Entering directory `/home/ryan/intel-536-537/coredrv'
> >> rm -f *.ko .*.o.cmd *.mod.c .*.ko.cmd *.o *~ core Module.* modules.*
> >> rm -rf .tmp_versions
> >> make[1]: Leaving directory `/home/ryan/intel-536-537/coredrv'
> >> rm -f *.o *.ko
> >> Module precompile check
> >> Current running kernel is: 2.6.28-11-generic
> >> /lib/modules... autoconf.h exists
> >> diff: /boot/vmlinuz.autoconf.h: No such file or directory
> >> autoconf.h matches running kernel
> >> diff: /boot/vmlinuz.version.h: No such file or directory
> >> version.h matches running kernel
> >> make[1]: Entering directory `/home/ryan/intel-536-537'
> >> Building for 537EP
> >> 2.6.28-11-generic
> >> make[2]: Entering directory `/home/ryan/intel-536-537/coredrv'
> >> make -C /lib/modules/2.6.28-11-generic/build
> >> SUBDIRS=/home/ryan/intel-536-537/coredrv modules
> >> make[3]: Entering directory `/usr/src/linux-headers-2.6.28-11-generic'
> >> CC [M] /home/ryan/intel-536-537/coredrv/coredrv.o
> >> CC [M] /home/ryan/intel-536-537/coredrv/clmmain.o
> >> CC [M] /home/ryan/intel-536-537/coredrv/rts.o
> >> CC [M] /home/ryan/intel-536-537/coredrv/task.o
> >> CC [M] /home/ryan/intel-536-537/coredrv/uart.o
> >> CC [M] /home/ryan/intel-536-537/coredrv/wwh_dflt.o
> >> CC [M] /home/ryan/intel-536-537/coredrv/locks.o
> >> CC [M] /home/ryan/intel-536-537/coredrv/softserial_io.o
> >> CC [M] /home/ryan/intel-536-537/coredrv/softserial_ioctl.o
> >> CC [M] /home/ryan/intel-536-537/coredrv/softserial.o
> >> CC [M] /home/ryan/intel-536-537/coredrv/afedsp_int.o
> >> LD [M] /home/ryan/intel-536-537/coredrv/Intel537.o
> >> Building modules, stage 2.
> >> MODPOST 1 modules
> >> WARNING: could not find /home/ryan/intel-536-537/coredrv/.537core.lib.cmd
> >> for /home/ryan/intel-536-537/coredrv/537core.lib
> >> CC /home/ryan/intel-536-537/coredrv/Intel537.mod.o
> >> LD [M] /home/ryan/intel-536-537/coredrv/Intel537.ko
> >> make[3]: Leaving directory `/usr/src/linux-headers-2.6.28-11-generic'
> >> make[2]: Leaving directory `/home/ryan/intel-536-537/coredrv'
> >> make[1]: Leaving directory `/home/ryan/intel-536-537'
> >> ryan@Ryan:~/intel-536-537$ sudo make uninstall
> >> [sudo] password for ryan:
> >> ryan@Ryan:~/intel-536-537$ sudo make install
> >> make[1]: Entering directory `/home/ryan/intel-536-537'
> >> rm -f /usr/sbin/hamregistry.bin
> >> bash 537_inst
> >> running kernel 2.6.28-11-generic
> >> installing hamregistry, used for persistant storage
> >> installing usrsound, a soft buzzer
> >> installing 537 module
> >> install DEBIAN 537 boot script and links
> >> starting module and utilities
> >> done
> >> make[1]: Leaving directory `/home/ryan/intel-536-537'
> >> ryan@Ryan:~/intel-536-537$ sudo /usr/bin/lspci -vvv
> >> 00:00.0 Host bridge: Intel Corporation 82865G/PE/P DRAM
> >> Controller/Host-Hub
> >> Interface (rev 02)
> >> Subsystem: Dell Device 019d
> >> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> >> Stepping- SERR+ FastB2B- DisINTx-
> >> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
> >> <MAbort+ >SERR- <PERR- INTx-
> >> Latency: 0
> >> Region 0: Memory at f8000000 (32-bit, prefetchable) [size=32M]
> >> Capabilities: [e4] Vendor Specific Information <?>
> >> Kernel driver in use: agpgart-intel
> >> Kernel modules: intel-agp
> >>
> >> 00:02.0 VGA compatible controller: Intel Corporation 82865G Integrated
> >> Graphics Controller (rev 02)
> >> Subsystem: Dell Device 019d
> >> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> >> Stepping- SERR- FastB2B- DisINTx-
> >> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
> >> <MAbort- >SERR- <PERR- INTx-
> >> Interrupt: pin A routed to IRQ 11
> >> Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
> >> Region 1: Memory at feb80000 (32-bit, non-prefetchable) [size=512K]
> >> Region 2: I/O ports at ed98 [size=8]
> >> Capabilities: [d0] Power Management version 1
> >> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
> >> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> >> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> >> Kernel modules: intelfb
> >>
> >> 00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB
> >> UHCI
> >> Controller #1 (rev 02)
> >> Subsystem: Dell Device 019d
> >> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> >> Stepping- SERR- FastB2B- DisINTx-
> >> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> >> <TAbort-
> >> <MAbort- >SERR- <PERR- INTx-
> >> Latency: 0
> >> Interrupt: pin A routed to IRQ 16
> >> Region 4: I/O ports at ff80 [size=32]
> >> Kernel driver in use: uhci_hcd
> >>
> >> 00:1d.1 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB
> >> UHCI
> >> Controller #2 (rev 02)
> >> Subsystem: Dell Device 019d
> >> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> >> Stepping- SERR- FastB2B- DisINTx-
> >> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> >> <TAbort-
> >> <MAbort- >SERR- <PERR- INTx-
> >> Latency: 0
> >> Interrupt: pin B routed to IRQ 19
> >> Region 4: I/O ports at ff60 [size=32]
> >> Kernel driver in use: uhci_hcd
> >>
> >> 00:1d.3 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB
> >> UHCI
> >> Controller #4 (rev 02)
> >> Subsystem: Dell Device 019d
> >> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> >> Stepping- SERR- FastB2B- DisINTx-
> >> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> >> <TAbort-
> >> <MAbort- >SERR- <PERR- INTx-
> >> Latency: 0
> >> Interrupt: pin A routed to IRQ 16
> >> Region 4: I/O ports at ff20 [size=32]
> >> Kernel driver in use: uhci_hcd
> >>
> >> 00:1d.7 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2
> >> EHCI
> >> Controller (rev 02) (prog-if 20)
> >> Subsystem: Dell Device 019d
> >> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> >> Stepping- SERR+ FastB2B- DisINTx-
> >> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> >> <TAbort-
> >> <MAbort- >SERR- <PERR- INTx-
> >> Latency: 0
> >> Interrupt: pin D routed to IRQ 23
> >> Region 0: Memory at ffa80800 (32-bit, non-prefetchable) [size=1K]
> >> Capabilities: [50] Power Management version 2
> >> Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
> >> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> >> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> >> Capabilities: [58] Debug port: BAR=1 offset=00a0
> >> Kernel driver in use: ehci_hcd
> >>
> >> 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2)
> >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> >> Stepping- SERR+ FastB2B- DisINTx-
> >> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
> >> <MAbort- >SERR- <PERR- INTx-
> >> Latency: 0
> >> Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
> >> I/O behind bridge: 0000d000-0000dfff
> >> Memory behind bridge: fea00000-feafffff
> >> Prefetchable memory behind bridge: fff00000-000fffff
> >> Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> >> <TAbort-
> >> <MAbort- <SERR- <PERR-
> >> BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
> >> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> >> Kernel modules: shpchp
> >>
> >> 00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC
> >> Interface
> >> Bridge (rev 02)
> >> Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
> >> Stepping- SERR+ FastB2B- DisINTx-
> >> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> >> <TAbort-
> >> <MAbort- >SERR- <PERR- INTx-
> >> Latency: 0
> >> Kernel modules: iTCO_wdt, intel-rng
> >>
> >> 00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE
> >> Controller (rev 02) (prog-if 8a [Master SecP PriP])
> >> Subsystem: Dell Device 019d
> >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> >> Stepping- SERR- FastB2B- DisINTx-
> >> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> >> <TAbort-
> >> <MAbort- >SERR- <PERR- INTx-
> >> Latency: 0
> >> Interrupt: pin A routed to IRQ 18
> >> Region 0: I/O ports at 01f0 [size=8]
> >> Region 1: I/O ports at 03f4 [size=1]
> >> Region 2: I/O ports at 0170 [size=8]
> >> Region 3: I/O ports at 0374 [size=1]
> >> Region 4: I/O ports at ffa0 [size=16]
> >> Region 5: Memory at feb7fc00 (32-bit, non-prefetchable) [size=1K]
> >> Kernel driver in use: ata_piix
> >>
> >> 00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller
> >> (rev 02)
> >> Subsystem: Dell Device 019d
> >> Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> >> Stepping- SERR- FastB2B- DisINTx-
> >> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> >> <TAbort-
> >> <MAbort- >SERR- <PERR- INTx-
> >> Interrupt: pin B routed to IRQ 3
> >> Region 4: I/O ports at eda0 [size=32]
> >> Kernel modules: i2c-i801
> >>
> >> 00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER
> >> (ICH5/ICH5R) AC'97 Audio Controller (rev 02)
> >> Subsystem: Dell Device 019d
> >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> >> Stepping- SERR- FastB2B- DisINTx-
> >> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> >> <TAbort-
> >> <MAbort- >SERR- <PERR- INTx-
> >> Latency: 0
> >> Interrupt: pin B routed to IRQ 17
> >> Region 0: I/O ports at ee00 [size=256]
> >> Region 1: I/O ports at edc0 [size=64]
> >> Region 2: Memory at feb7fa00 (32-bit, non-prefetchable) [size=512]
> >> Region 3: Memory at feb7f900 (32-bit, non-prefetchable) [size=256]
> >> Capabilities: [50] Power Management version 2
> >> Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
> >> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> >> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> >> Kernel driver in use: Intel ICH
> >> Kernel modules: snd-intel8x0
> >>
> >> 01:01.0 Modem: Intel Corporation FA82537EP 56K V.92 Data/Fax Modem PCI
> >> (rev
> >> 04)
> >> Subsystem: Dell Device 1000
> >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
> >> Stepping+ SERR+ FastB2B- DisINTx-
> >> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> >> <TAbort-
> >> <MAbort- >SERR- <PERR- INTx-
> >> Latency: 64 (250ns min, 15500ns max), Cache Line Size: 64 bytes
> >> Interrupt: pin A routed to IRQ 22
> >> Region 0: Memory at feafe000 (32-bit, non-prefetchable) [size=4K]
> >> Region 1: I/O ports at de00 [size=256]
> >> Capabilities: [80] Power Management version 2
> >> Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA
> >> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> >> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> >> Kernel driver in use: serial
> >>
> >> 01:08.0 Ethernet controller: Intel Corporation 82562EZ 10/100 Ethernet
> >> Controller (rev 02)
> >> Subsystem: Dell Device 019d
> >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
> >> Stepping- SERR+ FastB2B- DisINTx-
> >> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> >> <TAbort-
> >> <MAbort- >SERR- <PERR- INTx-
> >> Latency: 64 (2000ns min, 14000ns max), Cache Line Size: 64 bytes
> >> Interrupt: pin A routed to IRQ 20
> >> Region 0: Memory at feaff000 (32-bit, non-prefetchable) [size=4K]
> >> Region 1: I/O ports at ddc0 [size=64]
> >> Capabilities: [dc] Power Management version 2
> >> Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
> >> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> >> Status: D0 PME-Enable- DSel=0 DScale=2 PME-
> >> Kernel driver in use: e100
> >> Kernel modules: e100, eepro100
> >>
> >> ryan@Ryan:~/intel-536-537$
> >>
> >>
> >> Looked good until I ran the command:
> >> sudo /usr/bin/lspci -vvv
> >> which still returns the value Kernel driver in use: serial for my modem
> >> (see
> >> the below quote):
> >>
> >> 01:01.0 Modem: Intel Corporation FA82537EP 56K V.92 Data/Fax Modem PCI
> >> (rev
> >> 04)
> >> Subsystem: Dell Device 1000
> >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
> >> Stepping+ SERR+ FastB2B- DisINTx-
> >> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> >> <TAbort-
> >> <MAbort- >SERR- <PERR- INTx-
> >> Latency: 64 (250ns min, 15500ns max), Cache Line Size: 64 bytes
> >> Interrupt: pin A routed to IRQ 22
> >> Region 0: Memory at feafe000 (32-bit, non-prefetchable) [size=4K]
> >> Region 1: I/O ports at de00 [size=256]
> >> Capabilities: [80] Power Management version 2
> >> Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA
> >> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> >> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> >> Kernel driver in use: serial
> >>
> >>
> >> So what do you suggest now? I have a feeling that we are very close.
> >>
> >> Ryan
> >>
> >>
> >> ----- Original Message -----
> >> From: Philippe Vouters
> >> To: Ryan
> >> Cc: Linmodems ; Marvin Stodolsky
> >> Sent: Saturday, June 27, 2009 6:21 PM
> >> Subject: Re: Can you try this coredrv.c ?
> >>
> >>
> >>
> >> Ryan,
> >>
> >> It is entirely my fault. Mankind has never been perfect and is subject to
> >> mistakes.
> >>
> >> Can you use the gedit editor like this:
> >>
> >> $ gedit intel-536-537/makefile_537
> >>
> >> and replace
> >>
> >> MODEM_TYPE=$(shell $(LSPCI)/lspci -n | gawk '{ \
> >>
> >> with
> >>
> >> MODEM_TYPE=$(shell $(LSPCI)/lspci -n | awk '{ \
> >>
> >> To control:
> >>
> >> Before the change:
> >>
> >> [philippe@victor ~]$ grep gawk intel-536-537/*
> >> intel-536-537/makefile_537:MODEM_TYPE=$(shell $(LSPCI)/lspci -n | gawk
> >> '{ \
> >>
> >> After the change:
> >>
> >> [philippe@victor ~]$ grep gawk intel-536-537/*/*
> >> [philippe@victor ~]$
> >> [philippe@victor ~]$ grep gawk intel-536-537/*
> >> [philippe@victor ~]$
> >>
> >> Deeply sorry about this.
> >>
> >> Afterwards,
> >>
> >> $ make 537
> >> $ sudo make uninstall
> >> $ sudo make install
> >> $ sudo /usr/bin/lspci -vvv
> >> -
> >> http://vouters.dyndns.org:8080/
> >> Philippe Vouters (Fontainebleau/France)
> >>
> >>
> >>
> >>
> >> Le samedi 27 juin 2009 à 17:36 +0100, Ryan a écrit :
> >> Hmm...
> >>
> >> Heres exactly what I did:
> >>
> >> 1. I downlaoded
> >> http://vouters.dyndns.org:8080/Intel/intel-536EP-537EP_2009_06_24.tar.bz2
> >> and moved it to my /home/ryan folder.
> >> 2. I ran: $ rm -rf /<your path>/intel536-537/
> >> 3. I ran: $ tar -jxvf intel-536EP-537EP_2009_06_24.tar.bz2
> >> 4. I ran:
> >> $ cd intel-536-537/
> >> $ make 537
> >> $ sudo make uninstall
> >> $ sudo make install
> >> $ sudo lspci -vvv
> >> 5. I ran: $ grep serial /var/log/messages | tail -f
> >>
> >> Heres what it all looks like:
> >> ryan@Ryan:~$ rm -rf intel-536-537/
> >> ryan@Ryan:~$ tar -jxvf intel-536EP-537EP_2009_06_24.tar.bz2
> >> intel-536-537/
> >> intel-536-537/Intel536_inst
> >> intel-536-537/hamregistry
> >> intel-536-537/537_boot
> >> intel-536-537/coredrv/
> >> intel-536-537/coredrv/clmmain.c
> >> intel-536-537/coredrv/afedsp_int.h
> >> intel-536-537/coredrv/softserial_io.c
> >> intel-536-537/coredrv/537core.lib
> >> intel-536-537/coredrv/afedsp_int.c
> >> intel-536-537/coredrv/task.c
> >> intel-536-537/coredrv/536core.lib
> >> intel-536-537/coredrv/uart.c
> >> intel-536-537/coredrv/lock_lin.h
> >> intel-536-537/coredrv/locks.c
> >> intel-536-537/coredrv/softserial.h
> >> intel-536-537/coredrv/sys_ver.h
> >> intel-536-537/coredrv/wwh_dflt.h
> >> intel-536-537/coredrv/softserial_ioctl.c
> >> intel-536-537/coredrv/softserial.c
> >> intel-536-537/coredrv/tasker.h
> >> intel-536-537/coredrv/uart.h
> >> intel-536-537/coredrv/hamcore.h
> >> intel-536-537/coredrv/rts.c
> >> intel-536-537/coredrv/softcore.h
> >> intel-536-537/coredrv/coredrv.c
> >> intel-536-537/coredrv/rts.h
> >> intel-536-537/coredrv/hamdefs.h
> >> intel-536-537/coredrv/Makefile
> >> intel-536-537/coredrv/wwh_dflt.c
> >> intel-536-537/537_inst
> >> intel-536-537/makefile_536
> >> intel-536-537/Intel536_boot
> >> intel-536-537/makefile_537
> >> intel-536-537/license.txt
> >> intel-536-537/usrsound
> >> intel-536-537/config_check
> >> intel-536-537/makefile
> >> intel-536-537/readme.txt
> >> ryan@Ryan:~$ cd intel-536-537/
> >> ryan@Ryan:~/intel-536-537$ make 537
> >> cd coredrv; make clean
> >> make[1]: Entering directory `/home/ryan/intel-536-537/coredrv'
> >> rm -f *.ko .*.o.cmd *.mod.c .*.ko.cmd *.o *~ core Module.* modules.*
> >> rm -rf .tmp_versions
> >> make[1]: Leaving directory `/home/ryan/intel-536-537/coredrv'
> >> rm -f *.o *.ko
> >> Module precompile check
> >> Current running kernel is: 2.6.28-11-generic
> >> /lib/modules... autoconf.h exists
> >> diff: /boot/vmlinuz.autoconf.h: No such file or directory
> >> autoconf.h matches running kernel
> >> diff: /boot/vmlinuz.version.h: No such file or directory
> >> version.h matches running kernel
> >> /bin/bash: gawk: command not found
> >> /bin/bash: gawk: command not found
> >> /bin/bash: gawk: command not found
> >> /bin/bash: gawk: command not found
> >> /bin/bash: gawk: command not found
> >> make[1]: Entering directory `/home/ryan/intel-536-537'
> >> Modem type not determined.
> >> $ export MODEM_TYPE=<type>
> >> with type=537 or 537EP or 537SP or 537EA or 537AA
> >> make[1]: Leaving directory `/home/ryan/intel-536-537'
> >> ryan@Ryan:~/intel-536-537$ sudo make uninstall
> >> [sudo] password for ryan:
> >> ryan@Ryan:~/intel-536-537$ sudo make install
> >> ryan@Ryan:~/intel-536-537$ sudo lspci -vvv
> >> 00:00.0 Host bridge: Intel Corporation 82865G/PE/P DRAM
> >> Controller/Host-Hub
> >> Interface (rev 02)
> >> Subsystem: Dell Device 019d
> >> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> >> Stepping- SERR+ FastB2B- DisINTx-
> >> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
> >> <MAbort+ >SERR- <PERR- INTx-
> >> Latency: 0
> >> Region 0: Memory at f8000000 (32-bit, prefetchable) [size=32M]
> >> Capabilities: [e4] Vendor Specific Information <?>
> >> Kernel driver in use: agpgart-intel
> >> Kernel modules: intel-agp
> >>
> >> 00:02.0 VGA compatible controller: Intel Corporation 82865G Integrated
> >> Graphics Controller (rev 02)
> >> Subsystem: Dell Device 019d
> >> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> >> Stepping- SERR- FastB2B- DisINTx-
> >> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
> >> <MAbort- >SERR- <PERR- INTx-
> >> Interrupt: pin A routed to IRQ 11
> >> Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
> >> Region 1: Memory at feb80000 (32-bit, non-prefetchable) [size=512K]
> >> Region 2: I/O ports at ed98 [size=8]
> >> Capabilities: [d0] Power Management version 1
> >> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
> >> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> >> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> >> Kernel modules: intelfb
> >>
> >> 00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB
> >> UHCI
> >> Controller #1 (rev 02)
> >> Subsystem: Dell Device 019d
> >> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> >> Stepping- SERR- FastB2B- DisINTx-
> >> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> >> <TAbort-
> >> <MAbort- >SERR- <PERR- INTx-
> >> Latency: 0
> >> Interrupt: pin A routed to IRQ 16
> >> Region 4: I/O ports at ff80 [size=32]
> >> Kernel driver in use: uhci_hcd
> >>
> >> 00:1d.1 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB
> >> UHCI
> >> Controller #2 (rev 02)
> >> Subsystem: Dell Device 019d
> >> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> >> Stepping- SERR- FastB2B- DisINTx-
> >> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> >> <TAbort-
> >> <MAbort- >SERR- <PERR- INTx-
> >> Latency: 0
> >> Interrupt: pin B routed to IRQ 19
> >> Region 4: I/O ports at ff60 [size=32]
> >> Kernel driver in use: uhci_hcd
> >>
> >> 00:1d.3 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB
> >> UHCI
> >> Controller #4 (rev 02)
> >> Subsystem: Dell Device 019d
> >> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> >> Stepping- SERR- FastB2B- DisINTx-
> >> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> >> <TAbort-
> >> <MAbort- >SERR- <PERR- INTx-
> >> Latency: 0
> >> Interrupt: pin A routed to IRQ 16
> >> Region 4: I/O ports at ff20 [size=32]
> >> Kernel driver in use: uhci_hcd
> >>
> >> 00:1d.7 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2
> >> EHCI
> >> Controller (rev 02) (prog-if 20)
> >> Subsystem: Dell Device 019d
> >> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> >> Stepping- SERR+ FastB2B- DisINTx-
> >> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> >> <TAbort-
> >> <MAbort- >SERR- <PERR- INTx-
> >> Latency: 0
> >> Interrupt: pin D routed to IRQ 23
> >> Region 0: Memory at ffa80800 (32-bit, non-prefetchable) [size=1K]
> >> Capabilities: [50] Power Management version 2
> >> Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
> >> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> >> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> >> Capabilities: [58] Debug port: BAR=1 offset=00a0
> >> Kernel driver in use: ehci_hcd
> >>
> >> 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2)
> >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> >> Stepping- SERR+ FastB2B- DisINTx-
> >> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
> >> <MAbort- >SERR- <PERR- INTx-
> >> Latency: 0
> >> Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
> >> I/O behind bridge: 0000d000-0000dfff
> >> Memory behind bridge: fea00000-feafffff
> >> Prefetchable memory behind bridge: fff00000-000fffff
> >> Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> >> <TAbort-
> >> <MAbort- <SERR- <PERR-
> >> BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
> >> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> >> Kernel modules: shpchp
> >>
> >> 00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC
> >> Interface
> >> Bridge (rev 02)
> >> Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
> >> Stepping- SERR+ FastB2B- DisINTx-
> >> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> >> <TAbort-
> >> <MAbort- >SERR- <PERR- INTx-
> >> Latency: 0
> >> Kernel modules: iTCO_wdt, intel-rng
> >>
> >> 00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE
> >> Controller (rev 02) (prog-if 8a [Master SecP PriP])
> >> Subsystem: Dell Device 019d
> >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> >> Stepping- SERR- FastB2B- DisINTx-
> >> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> >> <TAbort-
> >> <MAbort- >SERR- <PERR- INTx-
> >> Latency: 0
> >> Interrupt: pin A routed to IRQ 18
> >> Region 0: I/O ports at 01f0 [size=8]
> >> Region 1: I/O ports at 03f4 [size=1]
> >> Region 2: I/O ports at 0170 [size=8]
> >> Region 3: I/O ports at 0374 [size=1]
> >> Region 4: I/O ports at ffa0 [size=16]
> >> Region 5: Memory at feb7fc00 (32-bit, non-prefetchable) [size=1K]
> >> Kernel driver in use: ata_piix
> >>
> >> 00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller
> >> (rev 02)
> >> Subsystem: Dell Device 019d
> >> Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> >> Stepping- SERR- FastB2B- DisINTx-
> >> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> >> <TAbort-
> >> <MAbort- >SERR- <PERR- INTx-
> >> Interrupt: pin B routed to IRQ 3
> >> Region 4: I/O ports at eda0 [size=32]
> >> Kernel modules: i2c-i801
> >>
> >> 00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER
> >> (ICH5/ICH5R) AC'97 Audio Controller (rev 02)
> >> Subsystem: Dell Device 019d
> >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> >> Stepping- SERR- FastB2B- DisINTx-
> >> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> >> <TAbort-
> >> <MAbort- >SERR- <PERR- INTx-
> >> Latency: 0
> >> Interrupt: pin B routed to IRQ 17
> >> Region 0: I/O ports at ee00 [size=256]
> >> Region 1: I/O ports at edc0 [size=64]
> >> Region 2: Memory at feb7fa00 (32-bit, non-prefetchable) [size=512]
> >> Region 3: Memory at feb7f900 (32-bit, non-prefetchable) [size=256]
> >> Capabilities: [50] Power Management version 2
> >> Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
> >> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> >> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> >> Kernel driver in use: Intel ICH
> >> Kernel modules: snd-intel8x0
> >>
> >> 01:01.0 Modem: Intel Corporation FA82537EP 56K V.92 Data/Fax Modem PCI
> >> (rev
> >> 04)
> >> Subsystem: Dell Device 1000
> >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
> >> Stepping+ SERR+ FastB2B- DisINTx-
> >> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> >> <TAbort-
> >> <MAbort- >SERR- <PERR- INTx-
> >> Latency: 64 (250ns min, 15500ns max), Cache Line Size: 64 bytes
> >> Interrupt: pin A routed to IRQ 22
> >> Region 0: Memory at feafe000 (32-bit, non-prefetchable) [size=4K]
> >> Region 1: I/O ports at de00 [size=256]
> >> Capabilities: [80] Power Management version 2
> >> Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA
> >> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> >> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> >> Kernel driver in use: serial
> >>
> >> 01:08.0 Ethernet controller: Intel Corporation 82562EZ 10/100 Ethernet
> >> Controller (rev 02)
> >> Subsystem: Dell Device 019d
> >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
> >> Stepping- SERR+ FastB2B- DisINTx-
> >> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> >> <TAbort-
> >> <MAbort- >SERR- <PERR- INTx-
> >> Latency: 64 (2000ns min, 14000ns max), Cache Line Size: 64 bytes
> >> Interrupt: pin A routed to IRQ 20
> >> Region 0: Memory at feaff000 (32-bit, non-prefetchable) [size=4K]
> >> Region 1: I/O ports at ddc0 [size=64]
> >> Capabilities: [dc] Power Management version 2
> >> Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
> >> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> >> Status: D0 PME-Enable- DSel=0 DScale=2 PME-
> >> Kernel driver in use: e100
> >> Kernel modules: e100, eepro100
> >>
> >> ryan@Ryan:~/intel-536-537$ dmesg | tail -f
> >> [ 14.331700] type=1505 audit(1246119551.399:6):
> >> operation="profile_load"
> >> name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2130
> >> [ 14.489685] type=1505 audit(1246119551.559:7):
> >> operation="profile_load"
> >> name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2135
> >> [ 14.490004] type=1505 audit(1246119551.559:8):
> >> operation="profile_load"
> >> name="/usr/sbin/cupsd" name2="default" pid=2135
> >> [ 14.523834] type=1505 audit(1246119551.591:9):
> >> operation="profile_load"
> >> name="/usr/sbin/tcpdump" name2="default" pid=2139
> >> [ 17.533682] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
> >> [ 17.533687] Bluetooth: BNEP filters: protocol multicast
> >> [ 17.575098] Bridge firewalling registered
> >> [ 20.208904] ppdev0: registered pardevice
> >> [ 20.250258] ppdev0: unregistered pardevice
> >> [ 22.945876] ADDRCONF(NETDEV_UP): eth0: link is not ready
> >>
> >> ryan@Ryan:~$ grep serial /var/log/messages | tail -f
> >> Jun 27 17:09:12 Ryan kernel: [ 1.983682] Couldn't register serial port
> >> 0000:01:01.0: -28
> >> Jun 27 17:09:12 Ryan kernel: [ 2.421376] usbcore: registered new
> >> interface driver usbserial
> >> Jun 27 17:09:12 Ryan kernel: [ 2.421409] usbcore: registered new
> >> interface driver usbserial_generic
> >> Jun 27 17:09:12 Ryan kernel: [ 2.421412] usbserial: USB Serial Driver
> >> core
> >> Jun 27 17:19:12 Ryan kernel: [ 1.986165] serial8250: ttyS0 at I/O
> >> 0x3f8
> >> (irq = 4) is a 16550A
> >> Jun 27 17:19:12 Ryan kernel: [ 1.986694] serial 0000:01:01.0: PCI INT
> >> A -> GSI 22 (level, low) -> IRQ 22
> >> Jun 27 17:19:12 Ryan kernel: [ 1.986982] Couldn't register serial port
> >> 0000:01:01.0: -28
> >> Jun 27 17:19:12 Ryan kernel: [ 2.425388] usbcore: registered new
> >> interface driver usbserial
> >> Jun 27 17:19:12 Ryan kernel: [ 2.425422] usbcore: registered new
> >> interface driver usbserial_generic
> >> Jun 27 17:19:12 Ryan kernel: [ 2.425425] usbserial: USB Serial Driver
> >> core
> >>
> >>
> >> As you can see the Kernel driver in use: serial still.
> >> Should I try to connect now anyway?
> >>
> >> Have you any other suggestions?
> >>
> >> Ryan
> >>
> >> ----- Original Message -----
> >> From: "Philippe Vouters" <Philippe.Vouters@xxxxxxxxxxx>
> >> To: "Ryan" <ryanmckeown@xxxxxxxxxxx>
> >> Sent: Friday, June 26, 2009 3:08 PM
> >> Subject: Re: Can you try this coredrv.c ?
> >>
> >>
> >> Ryan,
> >>
> >> Good ! You have awk installed on your system.
> >> In order to start up with clean files, I suggest you
> >> change your path to the root path of your intel-536-537/ directory.
> >> Then :
> >> $ rm -rf intel-536-537/
> >> and you detar what you downloaded from my site using the provided tar
> >> command.
> >> Afterwards :
> >> $ cd intel-536-537/
> >> $ make 537
> >> the above should only give one warning.
> >> $ sudo make uninstall
> >> $ sudo make install
> >> $ sudo lspci -vvv
> >> -
> >> http://vouters.dyndns.org:8080/
> >> Philippe Vouters (Fontainebleau/France)
> >>
> >>
> >> Le vendredi 26 juin 2009 à 14:23 +0100, Ryan a écrit :
> >> > Philippe.
> >> >
> >> > Ok, I did the test and it return just like yours,
> >> > /usr/bin/awk
> >> >
> >> > So now I downlaod from the link you gave me, run the commands again
> >> > (replacing /sbin/lspci with /usr/bin/lspci) and then run
> >> > $ rm -rf /<your path>/intel536-537/
> >> >
> >> > Is that correct?
> >> >
> >> >
> >> > Ryan
> >> > ----- Original Message -----
> >> > From: "Philippe Vouters" <Philippe.Vouters@xxxxxxxxxxx>
> >> > To: "Ryan" <ryanmckeown@xxxxxxxxxxx>
> >> > Cc: "Linmodems" <discuss@xxxxxxxxxxxxx>
> >> > Sent: Wednesday, June 24, 2009 5:02 PM
> >> > Subject: Re: Can you try this coredrv.c ?
> >> >
> >> >
> >> > > Ryan,
> >> > >
> >> > > Before you search for gawk, make the following test from your Linux
> >> > > account:
> >> > > [philippe@victor intel-536-537]$ which awk
> >> > > /usr/bin/awk
> >> > > This kind of answer shows you can use awk instead of gawk.
> >> > > If this is the case, you:
> >> > > $ rm -rf /<your path>/intel536-537/
> >> > > You download from my site:
> >> > > http://vouters.dyndns.org:8080/Intel/intel-536EP-537EP_2009_06_24.tar.bz2
> >> > > (the file name has changed to remain consistent with previous files
> >> > > and
> >> > > gawk has been replaced by awk in makefile_537).
> >> > > And you restart all the commands I sent you meanwhile replacing those
> >> > > containing
> >> > > /sbin/lspci
> >> > > with
> >> > > /usr/bin/lspci
> >> > > Yours sincerely,
> >> > > -
> >> > > http://vouters.dyndns.org:8080/
> >> > > Philippe Vouters (Fontainebleau/France)
> >> > >
> >> > >
> >> > > Le mercredi 24 juin 2009 à 16:09 +0100, Ryan a écrit :
> >> > >> Hmm...
> >> > >>
> >> > >> I don't have gawk, I'll search and see if I can get it. Might take a
> >> > >> while
> >> > >> by the time I find it, take down the dependencies, see if I have
> >> > >> them
> >> > >> on
> >> > >> Linux already, etc. and it involves a lot of switching between OS.
> >> > >> I do have the gcc compiler I think. (I have gcc, libgcc1,
> >> > >> gcc-4.3-base
> >> > >> and
> >> > >> gcc-4.3).
> >> > >>
> >> > >> $ which lspci
> >> > >> returns:
> >> > >> /usr/bin/lspci
> >> > >>
> >> > >>
> >> > >> Ryan.
> >> > >> ----- Original Message -----
> >> > >> From: "Philippe Vouters" <Philippe.Vouters@xxxxxxxxxxx>
> >> > >> To: "Ryan" <ryanmckeown@xxxxxxxxxxx>
> >> > >> Cc: "Linmodems" <discuss@xxxxxxxxxxxxx>; "Marvin Stodolsky"
> >> > >> <marvin.stodolsky@xxxxxxxxx>
> >> > >> Sent: Tuesday, June 23, 2009 7:45 PM
> >> > >> Subject: Re: Can you try this coredrv.c ?
> >> > >>
> >> > >>
> >> > >> > Ryan,
> >> > >> >
> >> > >> > Can you install gawk on your system from your Linux distribution
> >> > >> > CD ?
> >> > >> > Do you even have the gcc compiler ? Can you perform the command
> >> > >> > $ which lspci
> >> > >> > from a root account ?
> >> > >> > It almost impossible to give correct advices to you.
> >> > >> > -
> >> > >> > http://www.linkedin.com/pub/philippe-vouters/a/456/a87
> >> > >> > Philippe Vouters (Fontainebleau/France)
> >> > >> >
> >> > >> >
> >> > >> > Le mardi 23 juin 2009 à 19:27 +0100, Ryan a écrit :
> >> > >> >> Ok.
> >> > >> >>
> >> > >> >> Heres what the terminal looks like...
> >> > >> >>
> >> > >> >> ryan@Ryan:~$ tar -jxvf intel-536-537_2009_06_22.tar.bz2
> >> > >> >> intel-536-537/
> >> > >> >> intel-536-537/537_inst
> >> > >> >> intel-536-537/coredrv/
> >> > >> >> intel-536-537/coredrv/coredrv.c
> >> > >> >> intel-536-537/coredrv/wwh_dflt.c
> >> > >> >> intel-536-537/coredrv/hamcore.h
> >> > >> >> intel-536-537/coredrv/537core.lib
> >> > >> >> intel-536-537/coredrv/sys_ver.h
> >> > >> >> intel-536-537/coredrv/uart.h
> >> > >> >> intel-536-537/coredrv/locks.c
> >> > >> >> intel-536-537/coredrv/clmmain.c
> >> > >> >> intel-536-537/coredrv/hamdefs.h
> >> > >> >> intel-536-537/coredrv/uart.c
> >> > >> >> intel-536-537/coredrv/task.c
> >> > >> >> intel-536-537/coredrv/afedsp_int.h
> >> > >> >> intel-536-537/coredrv/softserial_io.c
> >> > >> >> intel-536-537/coredrv/Makefile
> >> > >> >> intel-536-537/coredrv/afedsp_int.c
> >> > >> >> intel-536-537/coredrv/softserial.h
> >> > >> >> intel-536-537/coredrv/softcore.h
> >> > >> >> intel-536-537/coredrv/softserial.c
> >> > >> >> intel-536-537/coredrv/536core.lib
> >> > >> >> intel-536-537/coredrv/lock_lin.h
> >> > >> >> intel-536-537/coredrv/rts.c
> >> > >> >> intel-536-537/coredrv/rts.h
> >> > >> >> intel-536-537/coredrv/softserial_ioctl.c
> >> > >> >> intel-536-537/coredrv/wwh_dflt.h
> >> > >> >> intel-536-537/coredrv/tasker.h
> >> > >> >> intel-536-537/makefile
> >> > >> >> intel-536-537/Intel536_boot
> >> > >> >> intel-536-537/hamregistry
> >> > >> >> intel-536-537/readme.txt
> >> > >> >> intel-536-537/Intel536_inst
> >> > >> >> intel-536-537/config_check
> >> > >> >> intel-536-537/.makefile_537.swp
> >> > >> >> intel-536-537/537_boot
> >> > >> >> intel-536-537/license.txt
> >> > >> >> intel-536-537/usrsound
> >> > >> >> intel-536-537/makefile_537
> >> > >> >> intel-536-537/makefile_536
> >> > >> >> ryan@Ryan:~$ cd intel-536-537
> >> > >> >> ryan@Ryan:~/intel-536-537$ make clean
> >> > >> >> cd coredrv; make clean
> >> > >> >> make[1]: Entering directory `/home/ryan/intel-536-537/coredrv'
> >> > >> >> rm -f *.ko .*.o.cmd *.mod.c .*.ko.cmd *.o *~ core Module.*
> >> > >> >> modules.*
> >> > >> >> rm -rf .tmp_versions
> >> > >> >> make[1]: Leaving directory `/home/ryan/intel-536-537/coredrv'
> >> > >> >> rm -f *.o *.ko
> >> > >> >> ryan@Ryan:~/intel-536-537$ make 537
> >> > >> >> cd coredrv; make clean
> >> > >> >> make[1]: Entering directory `/home/ryan/intel-536-537/coredrv'
> >> > >> >> rm -f *.ko .*.o.cmd *.mod.c .*.ko.cmd *.o *~ core Module.*
> >> > >> >> modules.*
> >> > >> >> rm -rf .tmp_versions
> >> > >> >> make[1]: Leaving directory `/home/ryan/intel-536-537/coredrv'
> >> > >> >> rm -f *.o *.ko
> >> > >> >> Module precompile check
> >> > >> >> Current running kernel is: 2.6.28-11-generic
> >> > >> >> /lib/modules... autoconf.h exists
> >> > >> >> diff: /boot/vmlinuz.autoconf.h: No such file or directory
> >> > >> >> autoconf.h matches running kernel
> >> > >> >> diff: /boot/vmlinuz.version.h: No such file or directory
> >> > >> >> version.h matches running kernel
> >> > >> >> /bin/bash: gawk: command not found
> >> > >> >> /bin/bash: gawk: command not found
> >> > >> >> /bin/bash: gawk: command not found
> >> > >> >> /bin/bash: gawk: command not found
> >> > >> >> /bin/bash: gawk: command not found
> >> > >> >> make[1]: Entering directory `/home/ryan/intel-536-537'
> >> > >> >> Modem type not determined.
> >> > >> >> $ export MODEM_TYPE=<type>
> >> > >> >> with type=537 or 537EP or 537SP or 537EA or 537AA
> >> > >> >> make[1]: Leaving directory `/home/ryan/intel-536-537'
> >> > >> >> ryan@Ryan:~/intel-536-537$ sudo make uninstall
> >> > >> >> [sudo] password for ryan:
> >> > >> >> ryan@Ryan:~/intel-536-537$ sudo make install
> >> > >> >> ryan@Ryan:~/intel-536-537$
> >> > >> >>
> >> > >> >>
> >> > >> >> Looked pretty fine. Then as instructed, I tried
> >> > >> >> $ dmesg | tail -f
> >> > >> >> and heres what the terminal looks like...
> >> > >> >>
> >> > >> >> ryan@Ryan:~/intel-536-537$ dmesg | tail -f
> >> > >> >> [ 14.687916] type=1505 audit(1245780532.759:6):
> >> > >> >> operation="profile_load"
> >> > >> >> name="/usr/lib/connman/scripts/dhclient-script" name2="default"
> >> > >> >> pid=2118
> >> > >> >> [ 14.847324] type=1505 audit(1245780532.919:7):
> >> > >> >> operation="profile_load"
> >> > >> >> name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2123
> >> > >> >> [ 14.847632] type=1505 audit(1245780532.919:8):
> >> > >> >> operation="profile_load"
> >> > >> >> name="/usr/sbin/cupsd" name2="default" pid=2123
> >> > >> >> [ 14.881506] type=1505 audit(1245780532.955:9):
> >> > >> >> operation="profile_load"
> >> > >> >> name="/usr/sbin/tcpdump" name2="default" pid=2127
> >> > >> >> [ 17.749175] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
> >> > >> >> [ 17.749179] Bluetooth: BNEP filters: protocol multicast
> >> > >> >> [ 17.784968] Bridge firewalling registered
> >> > >> >> [ 20.708493] ppdev0: registered pardevice
> >> > >> >> [ 20.756256] ppdev0: unregistered pardevice
> >> > >> >> [ 22.941878] ADDRCONF(NETDEV_UP): eth0: link is not ready
> >> > >> >>
> >> > >> >>
> >> > >> >> Then the command
> >> > >> >> sudo /sbin/lspci -vvv
> >> > >> >> With the terminal like...
> >> > >> >>
> >> > >> >> ryan@Ryan:~/intel-536-537$ sudo /sbin/lspci -vvv
> >> > >> >> [sudo] password for ryan:
> >> > >> >> sudo: /sbin/lspci: command not found
> >> > >> >> ryan@Ryan:~/intel-536-537$
> >> > >> >>
> >> > >> >>
> >> > >> >> And with...
> >> > >> >> $ grep serial /var/log/messages | tail -f
> >> > >> >>
> >> > >> >> ryan@Ryan:~/intel-536-537$ grep serial /var/log/messages |
> >> > >> >> tail -f
> >> > >> >> Jun 22 20:45:35 Ryan kernel: [ 1.976835] Couldn't register
> >> > >> >> serial
> >> > >> >> port
> >> > >> >> 0000:01:01.0: -28
> >> > >> >> Jun 22 20:45:35 Ryan kernel: [ 2.421386] usbcore: registered
> >> > >> >> new
> >> > >> >> interface driver usbserial
> >> > >> >> Jun 22 20:45:35 Ryan kernel: [ 2.421420] usbcore: registered
> >> > >> >> new
> >> > >> >> interface driver usbserial_generic
> >> > >> >> Jun 22 20:45:35 Ryan kernel: [ 2.421423] usbserial: USB Serial
> >> > >> >> Driver
> >> > >> >> core
> >> > >> >> Jun 23 19:08:53 Ryan kernel: [ 1.982975] serial8250: ttyS0 at
> >> > >> >> I/O
> >> > >> >> 0x3f8
> >> > >> >> (irq = 4) is a 16550A
> >> > >> >> Jun 23 19:08:53 Ryan kernel: [ 1.983438] serial 0000:01:01.0:
> >> > >> >> PCI
> >> > >> >> INT
> >> > >> >> A -> GSI 22 (level, low) -> IRQ 22
> >> > >> >> Jun 23 19:08:53 Ryan kernel: [ 1.983723] Couldn't register
> >> > >> >> serial
> >> > >> >> port
> >> > >> >> 0000:01:01.0: -28
> >> > >> >> Jun 23 19:08:53 Ryan kernel: [ 2.421380] usbcore: registered
> >> > >> >> new
> >> > >> >> interface driver usbserial
> >> > >> >> Jun 23 19:08:53 Ryan kernel: [ 2.421414] usbcore: registered
> >> > >> >> new
> >> > >> >> interface driver usbserial_generic
> >> > >> >> Jun 23 19:08:53 Ryan kernel: [ 2.421417] usbserial: USB Serial
> >> > >> >> Driver
> >> > >> >> core
> >> > >> >>
> >> > >> >>
> >> > >> >> And with:
> >> > >> >> $ lspci -vvv
> >> > >> >> The terminal is like this:
> >> > >> >>
> >> > >> >> ryan@Ryan:~/intel-536-537$ lspci -vvv
> >> > >> >> 00:00.0 Host bridge: Intel Corporation 82865G/PE/P DRAM
> >> > >> >> Controller/Host-Hub
> >> > >> >> Interface (rev 02)
> >> > >> >> Subsystem: Dell Device 019d
> >> > >> >> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> >> > >> >> ParErr-
> >> > >> >> Stepping- SERR+ FastB2B- DisINTx-
> >> > >> >> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> >> > >> >> <TAbort-
> >> > >> >> <MAbort+ >SERR- <PERR- INTx-
> >> > >> >> Latency: 0
> >> > >> >> Region 0: Memory at f8000000 (32-bit, prefetchable) [size=32M]
> >> > >> >> Capabilities: <access denied>
> >> > >> >> Kernel driver in use: agpgart-intel
> >> > >> >> Kernel modules: intel-agp
> >> > >> >>
> >> > >> >> 00:02.0 VGA compatible controller: Intel Corporation 82865G
> >> > >> >> Integrated
> >> > >> >> Graphics Controller (rev 02)
> >> > >> >> Subsystem: Dell Device 019d
> >> > >> >> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
> >> > >> >> ParErr-
> >> > >> >> Stepping- SERR- FastB2B- DisINTx-
> >> > >> >> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> >> > >> >> <TAbort-
> >> > >> >> <MAbort- >SERR- <PERR- INTx-
> >> > >> >> Interrupt: pin A routed to IRQ 11
> >> > >> >> Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
> >> > >> >> Region 1: Memory at feb80000 (32-bit, non-prefetchable)
> >> > >> >> [size=512K]
> >> > >> >> Region 2: I/O ports at ed98 [size=8]
> >> > >> >> Capabilities: <access denied>
> >> > >> >> Kernel modules: intelfb
> >> > >> >>
> >> > >> >> 00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R)
> >> > >> >> USB
> >> > >> >> UHCI
> >> > >> >> Controller #1 (rev 02)
> >> > >> >> Subsystem: Dell Device 019d
> >> > >> >> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
> >> > >> >> ParErr-
> >> > >> >> Stepping- SERR- FastB2B- DisINTx-
> >> > >> >> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> >> > >> >> <TAbort-
> >> > >> >> <MAbort- >SERR- <PERR- INTx-
> >> > >> >> Latency: 0
> >> > >> >> Interrupt: pin A routed to IRQ 16
> >> > >> >> Region 4: I/O ports at ff80 [size=32]
> >> > >> >> Kernel driver in use: uhci_hcd
> >> > >> >>
> >> > >> >> 00:1d.1 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R)
> >> > >> >> USB
> >> > >> >> UHCI
> >> > >> >> Controller #2 (rev 02)
> >> > >> >> Subsystem: Dell Device 019d
> >> > >> >> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
> >> > >> >> ParErr-
> >> > >> >> Stepping- SERR- FastB2B- DisINTx-
> >> > >> >> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> >> > >> >> <TAbort-
> >> > >> >> <MAbort- >SERR- <PERR- INTx-
> >> > >> >> Latency: 0
> >> > >> >> Interrupt: pin B routed to IRQ 19
> >> > >> >> Region 4: I/O ports at ff60 [size=32]
> >> > >> >> Kernel driver in use: uhci_hcd
> >> > >> >>
> >> > >> >> 00:1d.3 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R)
> >> > >> >> USB
> >> > >> >> UHCI
> >> > >> >> Controller #4 (rev 02)
> >> > >> >> Subsystem: Dell Device 019d
> >> > >> >> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
> >> > >> >> ParErr-
> >> > >> >> Stepping- SERR- FastB2B- DisINTx-
> >> > >> >> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> >> > >> >> <TAbort-
> >> > >> >> <MAbort- >SERR- <PERR- INTx-
> >> > >> >> Latency: 0
> >> > >> >> Interrupt: pin A routed to IRQ 16
> >> > >> >> Region 4: I/O ports at ff20 [size=32]
> >> > >> >> Kernel driver in use: uhci_hcd
> >> > >> >>
> >> > >> >> 00:1d.7 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R)
> >> > >> >> USB2
> >> > >> >> EHCI
> >> > >> >> Controller (rev 02) (prog-if 20)
> >> > >> >> Subsystem: Dell Device 019d
> >> > >> >> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> >> > >> >> ParErr-
> >> > >> >> Stepping- SERR+ FastB2B- DisINTx-
> >> > >> >> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> >> > >> >> <TAbort-
> >> > >> >> <MAbort- >SERR- <PERR- INTx-
> >> > >> >> Latency: 0
> >> > >> >> Interrupt: pin D routed to IRQ 23
> >> > >> >> Region 0: Memory at ffa80800 (32-bit, non-prefetchable)
> >> > >> >> [size=1K]
> >> > >> >> Capabilities: <access denied>
> >> > >> >> Kernel driver in use: ehci_hcd
> >> > >> >>
> >> > >> >> 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2)
> >> > >> >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> >> > >> >> ParErr-
> >> > >> >> Stepping- SERR+ FastB2B- DisINTx-
> >> > >> >> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> >> > >> >> <TAbort-
> >> > >> >> <MAbort- >SERR- <PERR- INTx-
> >> > >> >> Latency: 0
> >> > >> >> Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
> >> > >> >> I/O behind bridge: 0000d000-0000dfff
> >> > >> >> Memory behind bridge: fea00000-feafffff
> >> > >> >> Prefetchable memory behind bridge: fff00000-000fffff
> >> > >> >> Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> >> > >> >> <TAbort-
> >> > >> >> <MAbort- <SERR- <PERR-
> >> > >> >> BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
> >> > >> >> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> >> > >> >> Kernel modules: shpchp
> >> > >> >>
> >> > >> >> 00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC
> >> > >> >> Interface
> >> > >> >> Bridge (rev 02)
> >> > >> >> Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
> >> > >> >> ParErr-
> >> > >> >> Stepping- SERR+ FastB2B- DisINTx-
> >> > >> >> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> >> > >> >> <TAbort-
> >> > >> >> <MAbort- >SERR- <PERR- INTx-
> >> > >> >> Latency: 0
> >> > >> >> Kernel modules: iTCO_wdt, intel-rng
> >> > >> >>
> >> > >> >> 00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R)
> >> > >> >> IDE
> >> > >> >> Controller (rev 02) (prog-if 8a [Master SecP PriP])
> >> > >> >> Subsystem: Dell Device 019d
> >> > >> >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> >> > >> >> ParErr-
> >> > >> >> Stepping- SERR- FastB2B- DisINTx-
> >> > >> >> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> >> > >> >> <TAbort-
> >> > >> >> <MAbort- >SERR- <PERR- INTx-
> >> > >> >> Latency: 0
> >> > >> >> Interrupt: pin A routed to IRQ 18
> >> > >> >> Region 0: I/O ports at 01f0 [size=8]
> >> > >> >> Region 1: I/O ports at 03f4 [size=1]
> >> > >> >> Region 2: I/O ports at 0170 [size=8]
> >> > >> >> Region 3: I/O ports at 0374 [size=1]
> >> > >> >> Region 4: I/O ports at ffa0 [size=16]
> >> > >> >> Region 5: Memory at feb7fc00 (32-bit, non-prefetchable)
> >> > >> >> [size=1K]
> >> > >> >> Kernel driver in use: ata_piix
> >> > >> >>
> >> > >> >> 00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus
> >> > >> >> Controller
> >> > >> >> (rev 02)
> >> > >> >> Subsystem: Dell Device 019d
> >> > >> >> Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
> >> > >> >> ParErr-
> >> > >> >> Stepping- SERR- FastB2B- DisINTx-
> >> > >> >> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> >> > >> >> <TAbort-
> >> > >> >> <MAbort- >SERR- <PERR- INTx-
> >> > >> >> Interrupt: pin B routed to IRQ 3
> >> > >> >> Region 4: I/O ports at eda0 [size=32]
> >> > >> >> Kernel modules: i2c-i801
> >> > >> >>
> >> > >> >> 00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER
> >> > >> >> (ICH5/ICH5R) AC'97 Audio Controller (rev 02)
> >> > >> >> Subsystem: Dell Device 019d
> >> > >> >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> >> > >> >> ParErr-
> >> > >> >> Stepping- SERR- FastB2B- DisINTx-
> >> > >> >> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> >> > >> >> <TAbort-
> >> > >> >> <MAbort- >SERR- <PERR- INTx-
> >> > >> >> Latency: 0
> >> > >> >> Interrupt: pin B routed to IRQ 17
> >> > >> >> Region 0: I/O ports at ee00 [size=256]
> >> > >> >> Region 1: I/O ports at edc0 [size=64]
> >> > >> >> Region 2: Memory at feb7fa00 (32-bit, non-prefetchable)
> >> > >> >> [size=512]
> >> > >> >> Region 3: Memory at feb7f900 (32-bit, non-prefetchable)
> >> > >> >> [size=256]
> >> > >> >> Capabilities: <access denied>
> >> > >> >> Kernel driver in use: Intel ICH
> >> > >> >> Kernel modules: snd-intel8x0
> >> > >> >>
> >> > >> >> 01:01.0 Modem: Intel Corporation FA82537EP 56K V.92 Data/Fax
> >> > >> >> Modem
> >> > >> >> PCI
> >> > >> >> (rev
> >> > >> >> 04)
> >> > >> >> Subsystem: Dell Device 1000
> >> > >> >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
> >> > >> >> ParErr-
> >> > >> >> Stepping+ SERR+ FastB2B- DisINTx-
> >> > >> >> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> >> > >> >> <TAbort-
> >> > >> >> <MAbort- >SERR- <PERR- INTx-
> >> > >> >> Latency: 64 (250ns min, 15500ns max), Cache Line Size: 64 bytes
> >> > >> >> Interrupt: pin A routed to IRQ 22
> >> > >> >> Region 0: Memory at feafe000 (32-bit, non-prefetchable)
> >> > >> >> [size=4K]
> >> > >> >> Region 1: I/O ports at de00 [size=256]
> >> > >> >> Capabilities: <access denied>
> >> > >> >> Kernel driver in use: serial
> >> > >> >>
> >> > >> >> 01:08.0 Ethernet controller: Intel Corporation 82562EZ 10/100
> >> > >> >> Ethernet
> >> > >> >> Controller (rev 02)
> >> > >> >> Subsystem: Dell Device 019d
> >> > >> >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
> >> > >> >> ParErr-
> >> > >> >> Stepping- SERR+ FastB2B- DisINTx-
> >> > >> >> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> >> > >> >> <TAbort-
> >> > >> >> <MAbort- >SERR- <PERR- INTx-
> >> > >> >> Latency: 64 (2000ns min, 14000ns max), Cache Line Size: 64 bytes
> >> > >> >> Interrupt: pin A routed to IRQ 20
> >> > >> >> Region 0: Memory at feaff000 (32-bit, non-prefetchable)
> >> > >> >> [size=4K]
> >> > >> >> Region 1: I/O ports at ddc0 [size=64]
> >> > >> >> Capabilities: <access denied>
> >> > >> >> Kernel driver in use: e100
> >> > >> >> Kernel modules: e100, eepro100
> >> > >> >>
> >> > >> >> ryan@Ryan:~/intel-536-537$
> >> > >> >>
> >> > >> >>
> >> > >> >> And by retrying the efax command, I get this...
> >> > >> >>
> >> > >> >> ryan@Ryan:~/efax$ ./efax -vewinchmart
> >> > >> >> ./efax: Tue Jun 23 19:18:47 2009 efax v 0.9a-001114 Copyright
> >> > >> >> 1999
> >> > >> >> Ed
> >> > >> >> Casas
> >> > >> >> ./efax: Tue Jun 23 19:18:47 2009 efax v 0.9a-001114 Copyright
> >> > >> >> 1999
> >> > >> >> Ed
> >> > >> >> Casas
> >> > >> >> efax: 18:47 compiled Jun 19 2009 11:00:46
> >> > >> >> efax: 18:47 argv[0]=./efax
> >> > >> >> efax: 18:47 argv[1]=-vewinchmart
> >> > >> >> efax: 18:47 using built-in 128x0 font
> >> > >> >> efax: 18:47 Error: can't open serial port /dev/modem: No such
> >> > >> >> file
> >> > >> >> or
> >> > >> >> directory
> >> > >> >> efax: 18:47 done, returning 2 (unrecoverable error)
> >> > >> >>
> >> > >> >>
> >> > >> >> Ok, so what now?
> >> > >> >> Ryan
> >> > >> >>
> >> > >> >> ----- Original Message -----
> >> > >> >> From: "Philippe Vouters" <Philippe.Vouters@xxxxxxxxxxx>
> >> > >> >> To: "Ryan" <ryanmckeown@xxxxxxxxxxx>
> >> > >> >> Cc: "Linmodems" <discuss@xxxxxxxxxxxxx>; "Marvin Stodolsky"
> >> > >> >> <marvin.stodolsky@xxxxxxxxx>
> >> > >> >> Sent: Monday, June 22, 2009 8:20 PM
> >> > >> >> Subject: Re: Can you try this coredrv.c ?
> >> > >> >>
> >> > >> >>
> >> > >> >> > Dear Ryan,
> >> > >> >> >
> >> > >> >> > Your case does NOT look desperate at all. efax looks to be very
> >> > >> >> > correctly responding.
> >> > >> >> >
> >> > >> >> > However should I suggest you to download my latest
> >> > >> >> > modifications
> >> > >> >> > from
> >> > >> >> > http://vouters.dyndns.org:8080/Intel/intel-536-537_2009_06_22.tar.bz2
> >> > >> >> >
> >> > >> >> > The very same as Tapan Chugh in India, the 537 driver does
> >> > >> >> > conflict
> >> > >> >> > on
> >> > >> >> > your system with the 8250_pci kernel driver which cannot be
> >> > >> >> > unloaded.
> >> > >> >> > This 8250_pci driver allocates the serial ports for its own use
> >> > >> >> > early
> >> > >> >> > in
> >> > >> >> > the Linux boot process. The problem with this 8250_pci driver
> >> > >> >> > is
> >> > >> >> > that
> >> > >> >> > it
> >> > >> >> > knows nothing from an Intel 537 modem.
> >> > >> >> >
> >> > >> >> > And the most difficult thing I have to solve is how to
> >> > >> >> > correctly
> >> > >> >> > to
> >> > >> >> > get
> >> > >> >> > rid of this conflicting driver without being compelled to
> >> > >> >> > rebuild
> >> > >> >> > the
> >> > >> >> > Linux kernel without 8250_PCI support.
> >> > >> >> >
> >> > >> >> > Providing you download the latest above driver source code, you
> >> > >> >> > would,
> >> > >> >> > from your user account, type in the following commands:
> >> > >> >> >
> >> > >> >> > $ tar -jxvf intel-536-537_2009_06_22.tar.bz2
> >> > >> >> > $ make clean
> >> > >> >> > $ make 537
> >> > >> >> > The above command ought to give only one warning.
> >> > >> >> > $ sudo make uninstall
> >> > >> >> > $ sudo make install
> >> > >> >> > You should then check whether the driver correctly installed
> >> > >> >> > with:
> >> > >> >> > $ dmesg | tail -f
> >> > >> >> > You can check whether the 8250_pci driver correctly got
> >> > >> >> > unregistered
> >> > >> >> > by
> >> > >> >> > the Intel 537 driver with:
> >> > >> >> > sudo /sbin/lspci -vvv
> >> > >> >> > and perhaps with:
> >> > >> >> > $ grep serial /var/log/messages | tail -f
> >> > >> >> > If everything goes as expected you shouldn't read "serial" any
> >> > >> >> > longer
> >> > >> >> > with $ lspci -vvv as the kernel driver for your 537 modem
> >> > >> >> > board.
> >> > >> >> >
> >> > >> >> > Providing you see everything goes well as supposed it should,
> >> > >> >> > you
> >> > >> >> > may
> >> > >> >> > retry the efax command. You may further recheck with
> >> > >> >> > $ dmesg | tail -f
> >> > >> >> > Yours sincerely,
> >> > >> >> > --
> >> > >> >> > http://www.linkedin.com/pub/philippe-vouters/a/456/a87
> >> > >> >> > Philippe Vouters (Fontainebleau/France)
> >> > >> >> >> Ok.
> >> > >> >> >>
> >> > >> >> >> First of all, sorry I've been away for so long, I was away for
> >> > >> >> >> the
> >> > >> >> >> most
> >> > >> >> >> of
> >> > >> >> >> the weekend and only really got back here to find that you
> >> > >> >> >> guys
> >> > >> >> >> had
> >> > >> >> >> left
> >> > >> >> >> me
> >> > >> >> >> a load of emails. Ok, thanks for all your help, and heres what
> >> > >> >> >> I've
> >> > >> >> >> got.
> >> > >> >> >> It's clearly not worked and if I've missed anything then
> >> > >> >> >> please
> >> > >> >> >> do
> >> > >> >> >> tell
> >> > >> >> >> me.
> >> > >> >> >>
> >> > >> >> >> Ok, when I run "./efax -vewinchmart" I get the following:
> >> > >> >> >>
> >> > >> >> >> ./efax: Mon Jun 22 18:41:06 2009 efax v 0.9a-001114 Copyright
> >> > >> >> >> 1999
> >> > >> >> >> Ed
> >> > >> >> >> Casas
> >> > >> >> >> ./efax: Mon Jun 22 18:41:06 2009 efax v 0.9a-001114 Copyright
> >> > >> >> >> 1999
> >> > >> >> >> Ed
> >> > >> >> >> Casas
> >> > >> >> >> efax: 41:06 compiled Jun 19 2009 11:00:46
> >> > >> >> >> efax: 41:06 argv[0]=./efax
> >> > >> >> >> efax: 41:06 argv[1]=-vewinchmart
> >> > >> >> >> efax: 41:06 using built-in 128x0 font
> >> > >> >> >> efax: 41:08 opened /dev/modem
> >> > >> >> >> efax: 41:08 command "Q0V1"
> >> > >> >> >> efax: 41:08 waiting 2.0 s
> >> > >> >> >> efax: 41:09 .167 [ATQ0V1<CR><CR><LF>]
> >> > >> >> >> efax: 41:09 .227 [OK<CR><LF>]
> >> > >> >> >> efax: 41:09 response "OK"
> >> > >> >> >> efax: 41:09 command "E0"
> >> > >> >> >> efax: 41:09 waiting 5.0 s
> >> > >> >> >> efax: 41:09 .243 [ATE0<CR><CR><LF>]
> >> > >> >> >> efax: 41:09 .307 [OK<CR><LF>]
> >> > >> >> >> efax: 41:09 response "OK"
> >> > >> >> >> efax: 41:09 command "I3"
> >> > >> >> >> efax: 41:09 waiting 5.0 s
> >> > >> >> >> efax: 41:09 .355 [<CR><LF>537EP <CR><LF>]
> >> > >> >> >> efax: 41:09 .379 [<CR><LF>OK<CR><LF>]
> >> > >> >> >> efax: 41:09 response "OK"
> >> > >> >> >> efax: 41:09 command "+FCLASS=?"
> >> > >> >> >> efax: 41:09 waiting 5.0 s
> >> > >> >> >> efax: 41:09 .427 [<CR><LF>0,1,2,2.0,8<CR><LF>]
> >> > >> >> >> efax: 41:09 .443 [<CR><LF>OK<CR><LF>]
> >> > >> >> >> efax: 41:09 response "OK"
> >> > >> >> >> efax: 41:09 command "+FCLASS=2.0"
> >> > >> >> >> efax: 41:09 waiting 5.0 s
> >> > >> >> >> efax: 41:09 .515 [<CR><LF>OK<CR><LF>]
> >> > >> >> >> efax: 41:09 response "OK"
> >> > >> >> >> efax: 41:09 command "+FMI?"
> >> > >> >> >> efax: 41:09 waiting 5.0 s
> >> > >> >> >> efax: 41:09 .563 [<CR><LF>Intel Corporation<CR><LF>]
> >> > >> >> >> efax: 41:09 .587 [<CR><LF>OK<CR><LF>]
> >> > >> >> >> efax: 41:09 response "OK"
> >> > >> >> >> efax: 41:09 command "+FMM?"
> >> > >> >> >> efax: 41:09 waiting 5.0 s
> >> > >> >> >> efax: 41:09 .635 [<CR><LF>Intel(R) 537<CR><LF>]
> >> > >> >> >> efax: 41:09 .635 [<CR><LF>H.324 video-ready rev. 1.0<CR><LF>]
> >> > >> >> >> efax: 41:09 .659 [<CR><LF>OK<CR><LF>]
> >> > >> >> >> efax: 41:09 response "OK"
> >> > >> >> >> efax: 41:09 command "+FMR?"
> >> > >> >> >> efax: 41:09 waiting 5.0 s
> >> > >> >> >> efax: 41:09 .707 [<CR><LF>RSA REV 4.04 <CR><LF>]
> >> > >> >> >> efax: 41:09 .723 [<CR><LF>OK<CR><LF>]
> >> > >> >> >> efax: 41:09 response "OK"
> >> > >> >> >> efax: 41:09 using 537EP Intel Corporation Intel(R) 537 RSA REV
> >> > >> >> >> 4.04
> >> > >> >> >> in
> >> > >> >> >> class
> >> > >> >> >> 2.0
> >> > >> >> >> efax: 41:09 command "+FIP"
> >> > >> >> >> efax: 41:09 waiting 5.0 s
> >> > >> >> >> efax: 41:09 .787 [<CR><LF>ERROR<CR><LF>]
> >> > >> >> >> efax: 41:09 response "ERROR"
> >> > >> >> >> efax: 41:09 Warning: wrong response after command: +FIP
> >> > >> >> >> efax: 41:09 command "+FNR=1,1,1,0"
> >> > >> >> >> efax: 41:09 waiting 5.0 s
> >> > >> >> >> efax: 41:09 .859 [<CR><LF>OK<CR><LF>]
> >> > >> >> >> efax: 41:09 response "OK"
> >> > >> >> >> efax: 41:09 command "+FLO=1"
> >> > >> >> >> efax: 41:09 waiting 5.0 s
> >> > >> >> >> efax: 41:09 .923 [<CR><LF>OK<CR><LF>]
> >> > >> >> >> efax: 41:09 response "OK"
> >> > >> >> >> efax: 41:09 command "+FBO=0"
> >> > >> >> >> efax: 41:09 waiting 5.0 s
> >> > >> >> >> efax: 41:09 .995 [<CR><LF>OK<CR><LF>]
> >> > >> >> >> efax: 41:09 response "OK"
> >> > >> >> >> efax: 41:09 command "+FCR=1"
> >> > >> >> >> efax: 41:09 waiting 5.0 s
> >> > >> >> >> efax: 41:10 .067 [<CR><LF>OK<CR><LF>]
> >> > >> >> >> efax: 41:10 response "OK"
> >> > >> >> >> efax: 41:10 command "+FIS?"
> >> > >> >> >> efax: 41:10 waiting 5.0 s
> >> > >> >> >> efax: 41:10 .227 [<CR><LF>1,5,0,2,0,0,0,0<CR><LF>]
> >> > >> >> >> efax: 41:10 .243 [<CR><LF>OK<CR><LF>]
> >> > >> >> >> efax: 41:10 response "OK"
> >> > >> >> >> efax: 41:10 command "+FLI=" ""
> >> > >> >> >> efax: 41:10 waiting 5.0 s
> >> > >> >> >> efax: 41:10 .419 [<CR><LF>OK<CR><LF>]
> >> > >> >> >> efax: 41:10 response "OK"
> >> > >> >> >> efax: 41:10 command "A"
> >> > >> >> >> efax: 41:10 waiting 120.0 s
> >> > >> >> >> efax: 41:54 .307 [<CR><LF>OK<CR><LF>]
> >> > >> >> >> efax: 41:54 response "OK"
> >> > >> >> >> efax: 41:54 fax call answered
> >> > >> >> >> efax: 41:54 command "+FDR"
> >> > >> >> >> efax: 41:54 waiting 60.0 s
> >> > >> >> >> efax: 41:54 .467 [<CR><LF>ERROR<CR><LF>]
> >> > >> >> >> efax: 41:54 response "ERROR"
> >> > >> >> >> efax: 41:54 Error: receive (+FDR) command failed
> >> > >> >> >> efax: 41:54 command "+FKS"
> >> > >> >> >> efax: 41:54 waiting 5.0 s
> >> > >> >> >> efax: 41:54 .539 [<CR><LF>OK<CR><LF>]
> >> > >> >> >> efax: 41:54 response "OK"
> >> > >> >> >> efax: 41:54 command "Q0V1"
> >> > >> >> >> efax: 41:54 waiting 2.0 s
> >> > >> >> >> efax: 41:54 .619 [<CR><LF>OK<CR><LF>]
> >> > >> >> >> efax: 41:54 response "OK"
> >> > >> >> >> efax: 41:54 command "H"
> >> > >> >> >> efax: 41:54 waiting 5.0 s
> >> > >> >> >> efax: 41:55 .723 [<CR><LF>OK<CR><LF>]
> >> > >> >> >> efax: 41:55 response "OK"
> >> > >> >> >> efax: 41:55 done, returning 3 (invalid modem response)
> >> > >> >> >>
> >> > >> >> >>
> >> > >> >> >> The you wrote:
> >> > >> >> >> "Concerning grub.conf, check with the following:
> >> > >> >> >> $ sudo ls /boot
> >> > >> >> >> $ sudo ls /boot/grub
> >> > >> >> >> $ sudo /boot/grub/grub.conf
> >> > >> >> >> And you give the result of the commands."
> >> > >> >> >>
> >> > >> >> >>
> >> > >> >> >> This is what mine looks like...
> >> > >> >> >>
> >> > >> >> >> ryan@Ryan:~$ sudo ls /boot
> >> > >> >> >> abi-2.6.28-11-generic memtest86+.bin
> >> > >> >> >> config-2.6.28-11-generic System.map-2.6.28-11-generic
> >> > >> >> >> grub vmcoreinfo-2.6.28-11-generic
> >> > >> >> >> initrd.img-2.6.28-11-generic vmlinuz-2.6.28-11-generic
> >> > >> >> >> ryan@Ryan:~$ sudo ls /boot/grub
> >> > >> >> >> default fat_stage1_5 menu.lst stage1
> >> > >> >> >> device.map installed-version minix_stage1_5 stage2
> >> > >> >> >> e2fs_stage1_5 jfs_stage1_5 reiserfs_stage1_5 xfs_stage1_5
> >> > >> >> >> ryan@Ryan:~$ sudo /boot/grub/grub.conf
> >> > >> >> >> sudo: /boot/grub/grub.conf: command not found
> >> > >> >> >>
> >> > >> >> >>
> >> > >> >> >>
> >> > >> >> >> I copied the file to the specified directory and ran the
> >> > >> >> >> commands
> >> > >> >> >> you
> >> > >> >> >> asked,
> >> > >> >> >> heres what came up:
> >> > >> >> >>
> >> > >> >> >> ryan@Ryan:~$ cd /home/ryan/intel-537EP_secure-2.60.80.0
> >> > >> >> >> ryan@Ryan:~/intel-537EP_secure-2.60.80.0$ make clean
> >> > >> >> >> cd coredrv; make clean
> >> > >> >> >> make[1]: Entering directory
> >> > >> >> >> `/home/ryan/intel-537EP_secure-2.60.80.0/coredrv'
> >> > >> >> >> rm -f *.ko *.o .*.o.cmd *.mod.c *~ core .*.ko.cmd Module.*
> >> > >> >> >> modules.*
> >> > >> >> >> rm -rf .tmp_versions
> >> > >> >> >> make[1]: Leaving directory
> >> > >> >> >> `/home/ryan/intel-537EP_secure-2.60.80.0/coredrv'
> >> > >> >> >> rm -f *.o *.ko
> >> > >> >> >> ryan@Ryan:~/intel-537EP_secure-2.60.80.0$ make 537
> >> > >> >> >> Module precompile check
> >> > >> >> >> Current running kernel is: 2.6.28-11-generic
> >> > >> >> >> /lib/modules... autoconf.h exists
> >> > >> >> >> diff: /boot/vmlinuz.autoconf.h: No such file or directory
> >> > >> >> >> autoconf.h matches running kernel
> >> > >> >> >> diff: /boot/vmlinuz.version.h: No such file or directory
> >> > >> >> >> version.h matches running kernel
> >> > >> >> >> /bin/sh: [[: not found
> >> > >> >> >> /bin/sh: [[: not found
> >> > >> >> >> /bin/sh: [[: not found
> >> > >> >> >> /bin/sh: [[: not found
> >> > >> >> >> /bin/sh: /lspci: not found
> >> > >> >> >> Modem type not determined.
> >> > >> >> >> $ export MODEM_TYPE=<type>
> >> > >> >> >> with type=537 or 537EP or 537SP or 537EA or 537AA
> >> > >> >> >> ryan@Ryan:~/intel-537EP_secure-2.60.80.0$ sudo set def
> >> > >> >> >> /home/ryan/intel-537EP_secure-2.60.80.0/
> >> > >> >> >> sudo: set: command not found
> >> > >> >> >> ryan@Ryan:~/intel-537EP_secure-2.60.80.0$ sudo make uninstall
> >> > >> >> >> Uninstalling on system V boot like only.
> >> > >> >> >> killall usrsound || echo
> >> > >> >> >> usrsound: no process killed
> >> > >> >> >>
> >> > >> >> >> killall hamregistry || echo
> >> > >> >> >> hamregistry: no process killed
> >> > >> >> >>
> >> > >> >> >> rm -f /etc/rc.d/init.d/537_boot
> >> > >> >> >> rm -f /etc/hamregistry.bin
> >> > >> >> >> rm -f /usr/sbin/usrsound
> >> > >> >> >> rm -f /usr/sbin/hamregistry
> >> > >> >> >> rmmod Intel537
> >> > >> >> >> ERROR: Module Intel537 does not exist in /proc/modules
> >> > >> >> >> make: *** [uninstall] Error 1
> >> > >> >> >> ryan@Ryan:~/intel-537EP_secure-2.60.80.0$ sudo make install
> >> > >> >> >> rm -f /usr/sbin/hamregistry.bin
> >> > >> >> >> bash 537_inst
> >> > >> >> >> running kernel 2.6.28-11-generic
> >> > >> >> >> installing hamregistry, used for persistant storage
> >> > >> >> >> installing usrsound, a soft buzzer
> >> > >> >> >> installing 537 module
> >> > >> >> >> install: cannot stat `Intel537.ko': No such file or directory
> >> > >> >> >> make: *** [install] Error 1
> >> > >> >> >> ryan@Ryan:~/intel-537EP_secure-2.60.80.0$
> >> > >> >> >>
> >> > >> >> >>
> >> > >> >> >>
> >> > >> >> >> You also asked for the output of "$ lspci -nn -vvv -Q". Here
> >> > >> >> >> it
> >> > >> >> >> is:
> >> > >> >> >>
> >> > >> >> >> 00:00.0 Class [0600]: Device [8086:2570] (rev 02)
> >> > >> >> >> Subsystem: Device [1028:019d]
> >> > >> >> >> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> >> > >> >> >> ParErr-
> >> > >> >> >> Stepping- SERR+ FastB2B- DisINTx-
> >> > >> >> >> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast
> >> > >> >> >> >TAbort-
> >> > >> >> >> <TAbort-
> >> > >> >> >> <MAbort+ >SERR- <PERR- INTx-
> >> > >> >> >> Latency: 0
> >> > >> >> >> Region 0: Memory at f8000000 (32-bit, prefetchable)
> >> > >> >> >> [size=32M]
> >> > >> >> >> Capabilities: <access denied>
> >> > >> >> >> Kernel driver in use: agpgart-intel
> >> > >> >> >> Kernel modules: intel-agp
> >> > >> >> >>
> >> > >> >> >> 00:02.0 Class [0300]: Device [8086:2572] (rev 02)
> >> > >> >> >> Subsystem: Device [1028:019d]
> >> > >> >> >> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
> >> > >> >> >> ParErr-
> >> > >> >> >> Stepping- SERR- FastB2B- DisINTx-
> >> > >> >> >> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast
> >> > >> >> >> >TAbort-
> >> > >> >> >> <TAbort-
> >> > >> >> >> <MAbort- >SERR- <PERR- INTx-
> >> > >> >> >> Interrupt: pin A routed to IRQ 11
> >> > >> >> >> Region 0: Memory at f0000000 (32-bit, prefetchable)
> >> > >> >> >> [size=128M]
> >> > >> >> >> Region 1: Memory at feb80000 (32-bit, non-prefetchable)
> >> > >> >> >> [size=512K]
> >> > >> >> >> Region 2: I/O ports at ed98 [size=8]
> >> > >> >> >> Capabilities: <access denied>
> >> > >> >> >> Kernel modules: intelfb
> >> > >> >> >>
> >> > >> >> >> 00:1d.0 Class [0c03]: Device [8086:24d2] (rev 02)
> >> > >> >> >> Subsystem: Device [1028:019d]
> >> > >> >> >> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
> >> > >> >> >> ParErr-
> >> > >> >> >> Stepping- SERR- FastB2B- DisINTx-
> >> > >> >> >> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
> >> > >> >> >> >TAbort-
> >> > >> >> >> <TAbort-
> >> > >> >> >> <MAbort- >SERR- <PERR- INTx-
> >> > >> >> >> Latency: 0
> >> > >> >> >> Interrupt: pin A routed to IRQ 16
> >> > >> >> >> Region 4: I/O ports at ff80 [size=32]
> >> > >> >> >> Kernel driver in use: uhci_hcd
> >> > >> >> >>
> >> > >> >> >> 00:1d.1 Class [0c03]: Device [8086:24d4] (rev 02)
> >> > >> >> >> Subsystem: Device [1028:019d]
> >> > >> >> >> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
> >> > >> >> >> ParErr-
> >> > >> >> >> Stepping- SERR- FastB2B- DisINTx-
> >> > >> >> >> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
> >> > >> >> >> >TAbort-
> >> > >> >> >> <TAbort-
> >> > >> >> >> <MAbort- >SERR- <PERR- INTx-
> >> > >> >> >> Latency: 0
> >> > >> >> >> Interrupt: pin B routed to IRQ 19
> >> > >> >> >> Region 4: I/O ports at ff60 [size=32]
> >> > >> >> >> Kernel driver in use: uhci_hcd
> >> > >> >> >>
> >> > >> >> >> 00:1d.3 Class [0c03]: Device [8086:24de] (rev 02)
> >> > >> >> >> Subsystem: Device [1028:019d]
> >> > >> >> >> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
> >> > >> >> >> ParErr-
> >> > >> >> >> Stepping- SERR- FastB2B- DisINTx-
> >> > >> >> >> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
> >> > >> >> >> >TAbort-
> >> > >> >> >> <TAbort-
> >> > >> >> >> <MAbort- >SERR- <PERR- INTx-
> >> > >> >> >> Latency: 0
> >> > >> >> >> Interrupt: pin A routed to IRQ 16
> >> > >> >> >> Region 4: I/O ports at ff20 [size=32]
> >> > >> >> >> Kernel driver in use: uhci_hcd
> >> > >> >> >>
> >> > >> >> >> 00:1d.7 Class [0c03]: Device [8086:24dd] (rev 02) (prog-if 20)
> >> > >> >> >> Subsystem: Device [1028:019d]
> >> > >> >> >> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> >> > >> >> >> ParErr-
> >> > >> >> >> Stepping- SERR+ FastB2B- DisINTx-
> >> > >> >> >> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
> >> > >> >> >> >TAbort-
> >> > >> >> >> <TAbort-
> >> > >> >> >> <MAbort- >SERR- <PERR- INTx-
> >> > >> >> >> Latency: 0
> >> > >> >> >> Interrupt: pin D routed to IRQ 23
> >> > >> >> >> Region 0: Memory at ffa80800 (32-bit, non-prefetchable)
> >> > >> >> >> [size=1K]
> >> > >> >> >> Capabilities: <access denied>
> >> > >> >> >> Kernel driver in use: ehci_hcd
> >> > >> >> >>
> >> > >> >> >> 00:1e.0 Class [0604]: Device [8086:244e] (rev c2)
> >> > >> >> >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> >> > >> >> >> ParErr-
> >> > >> >> >> Stepping- SERR+ FastB2B- DisINTx-
> >> > >> >> >> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast
> >> > >> >> >> >TAbort-
> >> > >> >> >> <TAbort-
> >> > >> >> >> <MAbort- >SERR- <PERR- INTx-
> >> > >> >> >> Latency: 0
> >> > >> >> >> Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
> >> > >> >> >> I/O behind bridge: 0000d000-0000dfff
> >> > >> >> >> Memory behind bridge: fea00000-feafffff
> >> > >> >> >> Prefetchable memory behind bridge: fff00000-000fffff
> >> > >> >> >> Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium
> >> > >> >> >> >TAbort-
> >> > >> >> >> <TAbort-
> >> > >> >> >> <MAbort- <SERR- <PERR-
> >> > >> >> >> BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
> >> > >> >> >> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> >> > >> >> >> Kernel modules: shpchp
> >> > >> >> >>
> >> > >> >> >> 00:1f.0 Class [0601]: Device [8086:24d0] (rev 02)
> >> > >> >> >> Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
> >> > >> >> >> ParErr-
> >> > >> >> >> Stepping- SERR+ FastB2B- DisINTx-
> >> > >> >> >> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
> >> > >> >> >> >TAbort-
> >> > >> >> >> <TAbort-
> >> > >> >> >> <MAbort- >SERR- <PERR- INTx-
> >> > >> >> >> Latency: 0
> >> > >> >> >> Kernel modules: iTCO_wdt, intel-rng
> >> > >> >> >>
> >> > >> >> >> 00:1f.1 Class [0101]: Device [8086:24db] (rev 02) (prog-if 8a
> >> > >> >> >> [Master
> >> > >> >> >> SecP
> >> > >> >> >> PriP])
> >> > >> >> >> Subsystem: Device [1028:019d]
> >> > >> >> >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> >> > >> >> >> ParErr-
> >> > >> >> >> Stepping- SERR- FastB2B- DisINTx-
> >> > >> >> >> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
> >> > >> >> >> >TAbort-
> >> > >> >> >> <TAbort-
> >> > >> >> >> <MAbort- >SERR- <PERR- INTx-
> >> > >> >> >> Latency: 0
> >> > >> >> >> Interrupt: pin A routed to IRQ 18
> >> > >> >> >> Region 0: I/O ports at 01f0 [size=8]
> >> > >> >> >> Region 1: I/O ports at 03f4 [size=1]
> >> > >> >> >> Region 2: I/O ports at 0170 [size=8]
> >> > >> >> >> Region 3: I/O ports at 0374 [size=1]
> >> > >> >> >> Region 4: I/O ports at ffa0 [size=16]
> >> > >> >> >> Region 5: Memory at feb7fc00 (32-bit, non-prefetchable)
> >> > >> >> >> [size=1K]
> >> > >> >> >> Kernel driver in use: ata_piix
> >> > >> >> >>
> >> > >> >> >> 00:1f.3 Class [0c05]: Device [8086:24d3] (rev 02)
> >> > >> >> >> Subsystem: Device [1028:019d]
> >> > >> >> >> Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
> >> > >> >> >> ParErr-
> >> > >> >> >> Stepping- SERR- FastB2B- DisINTx-
> >> > >> >> >> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
> >> > >> >> >> >TAbort-
> >> > >> >> >> <TAbort-
> >> > >> >> >> <MAbort- >SERR- <PERR- INTx-
> >> > >> >> >> Interrupt: pin B routed to IRQ 3
> >> > >> >> >> Region 4: I/O ports at eda0 [size=32]
> >> > >> >> >> Kernel modules: i2c-i801
> >> > >> >> >>
> >> > >> >> >> 00:1f.5 Class [0401]: Device [8086:24d5] (rev 02)
> >> > >> >> >> Subsystem: Device [1028:019d]
> >> > >> >> >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> >> > >> >> >> ParErr-
> >> > >> >> >> Stepping- SERR- FastB2B- DisINTx-
> >> > >> >> >> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
> >> > >> >> >> >TAbort-
> >> > >> >> >> <TAbort-
> >> > >> >> >> <MAbort- >SERR- <PERR- INTx-
> >> > >> >> >> Latency: 0
> >> > >> >> >> Interrupt: pin B routed to IRQ 17
> >> > >> >> >> Region 0: I/O ports at ee00 [size=256]
> >> > >> >> >> Region 1: I/O ports at edc0 [size=64]
> >> > >> >> >> Region 2: Memory at feb7fa00 (32-bit, non-prefetchable)
> >> > >> >> >> [size=512]
> >> > >> >> >> Region 3: Memory at feb7f900 (32-bit, non-prefetchable)
> >> > >> >> >> [size=256]
> >> > >> >> >> Capabilities: <access denied>
> >> > >> >> >> Kernel driver in use: Intel ICH
> >> > >> >> >> Kernel modules: snd-intel8x0
> >> > >> >> >>
> >> > >> >> >> 01:01.0 Class [0703]: Device [8086:1080] (rev 04)
> >> > >> >> >> Subsystem: Device [1028:1000]
> >> > >> >> >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
> >> > >> >> >> ParErr-
> >> > >> >> >> Stepping+ SERR+ FastB2B- DisINTx-
> >> > >> >> >> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
> >> > >> >> >> >TAbort-
> >> > >> >> >> <TAbort-
> >> > >> >> >> <MAbort- >SERR- <PERR- INTx-
> >> > >> >> >> Latency: 64 (250ns min, 15500ns max), Cache Line Size: 64
> >> > >> >> >> bytes
> >> > >> >> >> Interrupt: pin A routed to IRQ 22
> >> > >> >> >> Region 0: Memory at feafe000 (32-bit, non-prefetchable)
> >> > >> >> >> [size=4K]
> >> > >> >> >> Region 1: I/O ports at de00 [size=256]
> >> > >> >> >> Capabilities: <access denied>
> >> > >> >> >> Kernel driver in use: serial
> >> > >> >> >>
> >> > >> >> >> 01:08.0 Class [0200]: Device [8086:1050] (rev 02)
> >> > >> >> >> Subsystem: Device [1028:019d]
> >> > >> >> >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
> >> > >> >> >> ParErr-
> >> > >> >> >> Stepping- SERR+ FastB2B- DisINTx-
> >> > >> >> >> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
> >> > >> >> >> >TAbort-
> >> > >> >> >> <TAbort-
> >> > >> >> >> <MAbort- >SERR- <PERR- INTx-
> >> > >> >> >> Latency: 64 (2000ns min, 14000ns max), Cache Line Size: 64
> >> > >> >> >> bytes
> >> > >> >> >> Interrupt: pin A routed to IRQ 20
> >> > >> >> >> Region 0: Memory at feaff000 (32-bit, non-prefetchable)
> >> > >> >> >> [size=4K]
> >> > >> >> >> Region 1: I/O ports at ddc0 [size=64]
> >> > >> >> >> Capabilities: <access denied>
> >> > >> >> >> Kernel driver in use: e100
> >> > >> >> >> Kernel modules: e100, eepro100
> >> > >> >> >>
> >> > >> >> >>
> >> > >> >> >> Can you help me any further?
> >> > >> >> >> Maybe I have made a mistake somewhere along the lines.
> >> > >> >> >> Can you explain to me specifically where you want me to go
> >> > >> >> >> from
> >> > >> >> >> here?
> >> > >> >> >>
> >> > >> >> >> Ryan
> >> > >> >> >>
> >> > >> >> >>
> >> > >> >> >
> >> > >> >> >
> >> > >> >>
> >> > >> >>
> >> > >> >
> >> > >> >
> >> > >>
> >> > >>
> >> > >
> >> > >
> >> >
> >> >
> >>
> >>
> >
> >
>
>
