Dear Ryan,
Providing that with the command:
$ dmesg | grep -i 537EP
you can read the following strings:
"
537ep:softcore_init_struct: driver serial already allocated device.
"
AND
"
537ep:softcore_init_struct: Unregistering serial driver.
"
then you may give efax a try. To activate efax, you would:
$ cd efax/
$ ./efax -vewinchmart
Does efax work correctly without crashing your computer ????
You may also try the following command:
$ stty -F /dev/modem -a
If the 537EP driver actually answers, here is what this should tell:
[philippe@victor ~]$ stty -F /dev/modem -a
speed 19200 baud; rows 0; columns 0; line = 0;
intr = ^C; quit = ^\; erase = ^?; kill = ^U; eof = ^D; eol = <undef>;
eol2 = <undef>; swtch = <undef>; start = ^Q; stop = ^S; susp = ^Z; rprnt
= ^R;
werase = ^W; lnext = ^V; flush = ^O; min = 1; time = 0;
-parenb -parodd cs8 -hupcl -cstopb cread clocal crtscts
-ignbrk -brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr -icrnl
-ixon -ixoff
-iuclc -ixany -imaxbel -iutf8
-opost -olcuc -ocrnl -onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0
bs0 vt0 ff0
-isig -icanon -iexten -echo -echoe -echok -echonl -noflsh -xcase -tostop
-echoprt
-echoctl -echoke
-
http://vouters.dyndns.org:8080/
Philippe Vouters (Fontainebleau/France)
Le dimanche 28 juin 2009 à 16:14 +0100, Ryan a écrit :
> Hey, don't worry yourself about it.
>
> Ok. I think we are getting somewhere now at last...
>
> Heres what my terminal looks like:
> ryan@Ryan:~$ grep gawk intel-536-537/*
> intel-536-537/makefile_537:MODEM_TYPE=$(shell $(LSPCI)/lspci -n | gawk '{ \
> ryan@Ryan:~$ gedit intel-536-537/makefile_537
> ryan@Ryan:~$ grep gawk intel-536-537/*/*
> ryan@Ryan:~$ grep gawk intel-536-537/*
> ryan@Ryan:~$ cd intel-536-537/
> ryan@Ryan:~/intel-536-537$ make 537
> cd coredrv; make clean
> make[1]: Entering directory `/home/ryan/intel-536-537/coredrv'
> rm -f *.ko .*.o.cmd *.mod.c .*.ko.cmd *.o *~ core Module.* modules.*
> rm -rf .tmp_versions
> make[1]: Leaving directory `/home/ryan/intel-536-537/coredrv'
> rm -f *.o *.ko
> Module precompile check
> Current running kernel is: 2.6.28-11-generic
> /lib/modules... autoconf.h exists
> diff: /boot/vmlinuz.autoconf.h: No such file or directory
> autoconf.h matches running kernel
> diff: /boot/vmlinuz.version.h: No such file or directory
> version.h matches running kernel
> make[1]: Entering directory `/home/ryan/intel-536-537'
> Building for 537EP
> 2.6.28-11-generic
> make[2]: Entering directory `/home/ryan/intel-536-537/coredrv'
> make -C /lib/modules/2.6.28-11-generic/build
> SUBDIRS=/home/ryan/intel-536-537/coredrv modules
> make[3]: Entering directory `/usr/src/linux-headers-2.6.28-11-generic'
> CC [M] /home/ryan/intel-536-537/coredrv/coredrv.o
> CC [M] /home/ryan/intel-536-537/coredrv/clmmain.o
> CC [M] /home/ryan/intel-536-537/coredrv/rts.o
> CC [M] /home/ryan/intel-536-537/coredrv/task.o
> CC [M] /home/ryan/intel-536-537/coredrv/uart.o
> CC [M] /home/ryan/intel-536-537/coredrv/wwh_dflt.o
> CC [M] /home/ryan/intel-536-537/coredrv/locks.o
> CC [M] /home/ryan/intel-536-537/coredrv/softserial_io.o
> CC [M] /home/ryan/intel-536-537/coredrv/softserial_ioctl.o
> CC [M] /home/ryan/intel-536-537/coredrv/softserial.o
> CC [M] /home/ryan/intel-536-537/coredrv/afedsp_int.o
> LD [M] /home/ryan/intel-536-537/coredrv/Intel537.o
> Building modules, stage 2.
> MODPOST 1 modules
> WARNING: could not find /home/ryan/intel-536-537/coredrv/.537core.lib.cmd
> for /home/ryan/intel-536-537/coredrv/537core.lib
> CC /home/ryan/intel-536-537/coredrv/Intel537.mod.o
> LD [M] /home/ryan/intel-536-537/coredrv/Intel537.ko
> make[3]: Leaving directory `/usr/src/linux-headers-2.6.28-11-generic'
> make[2]: Leaving directory `/home/ryan/intel-536-537/coredrv'
> make[1]: Leaving directory `/home/ryan/intel-536-537'
> ryan@Ryan:~/intel-536-537$ sudo make uninstall
> [sudo] password for ryan:
> ryan@Ryan:~/intel-536-537$ sudo make install
> make[1]: Entering directory `/home/ryan/intel-536-537'
> rm -f /usr/sbin/hamregistry.bin
> bash 537_inst
> running kernel 2.6.28-11-generic
> installing hamregistry, used for persistant storage
> installing usrsound, a soft buzzer
> installing 537 module
> install DEBIAN 537 boot script and links
> starting module and utilities
> done
> make[1]: Leaving directory `/home/ryan/intel-536-537'
> ryan@Ryan:~/intel-536-537$ sudo /usr/bin/lspci -vvv
> 00:00.0 Host bridge: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub
> Interface (rev 02)
> Subsystem: Dell Device 019d
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort+ >SERR- <PERR- INTx-
> Latency: 0
> Region 0: Memory at f8000000 (32-bit, prefetchable) [size=32M]
> Capabilities: [e4] Vendor Specific Information <?>
> Kernel driver in use: agpgart-intel
> Kernel modules: intel-agp
>
> 00:02.0 VGA compatible controller: Intel Corporation 82865G Integrated
> Graphics Controller (rev 02)
> Subsystem: Dell Device 019d
> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Interrupt: pin A routed to IRQ 11
> Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
> Region 1: Memory at feb80000 (32-bit, non-prefetchable) [size=512K]
> Region 2: I/O ports at ed98 [size=8]
> Capabilities: [d0] Power Management version 1
> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Kernel modules: intelfb
>
> 00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI
> Controller #1 (rev 02)
> Subsystem: Dell Device 019d
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 16
> Region 4: I/O ports at ff80 [size=32]
> Kernel driver in use: uhci_hcd
>
> 00:1d.1 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI
> Controller #2 (rev 02)
> Subsystem: Dell Device 019d
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin B routed to IRQ 19
> Region 4: I/O ports at ff60 [size=32]
> Kernel driver in use: uhci_hcd
>
> 00:1d.3 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI
> Controller #4 (rev 02)
> Subsystem: Dell Device 019d
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 16
> Region 4: I/O ports at ff20 [size=32]
> Kernel driver in use: uhci_hcd
>
> 00:1d.7 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI
> Controller (rev 02) (prog-if 20)
> Subsystem: Dell Device 019d
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin D routed to IRQ 23
> Region 0: Memory at ffa80800 (32-bit, non-prefetchable) [size=1K]
> Capabilities: [50] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [58] Debug port: BAR=1 offset=00a0
> Kernel driver in use: ehci_hcd
>
> 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2)
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
> I/O behind bridge: 0000d000-0000dfff
> Memory behind bridge: fea00000-feafffff
> Prefetchable memory behind bridge: fff00000-000fffff
> Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
> <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Kernel modules: shpchp
>
> 00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface
> Bridge (rev 02)
> Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Kernel modules: iTCO_wdt, intel-rng
>
> 00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE
> Controller (rev 02) (prog-if 8a [Master SecP PriP])
> Subsystem: Dell Device 019d
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 18
> Region 0: I/O ports at 01f0 [size=8]
> Region 1: I/O ports at 03f4 [size=1]
> Region 2: I/O ports at 0170 [size=8]
> Region 3: I/O ports at 0374 [size=1]
> Region 4: I/O ports at ffa0 [size=16]
> Region 5: Memory at feb7fc00 (32-bit, non-prefetchable) [size=1K]
> Kernel driver in use: ata_piix
>
> 00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller
> (rev 02)
> Subsystem: Dell Device 019d
> Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Interrupt: pin B routed to IRQ 3
> Region 4: I/O ports at eda0 [size=32]
> Kernel modules: i2c-i801
>
> 00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER
> (ICH5/ICH5R) AC'97 Audio Controller (rev 02)
> Subsystem: Dell Device 019d
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin B routed to IRQ 17
> Region 0: I/O ports at ee00 [size=256]
> Region 1: I/O ports at edc0 [size=64]
> Region 2: Memory at feb7fa00 (32-bit, non-prefetchable) [size=512]
> Region 3: Memory at feb7f900 (32-bit, non-prefetchable) [size=256]
> Capabilities: [50] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: Intel ICH
> Kernel modules: snd-intel8x0
>
> 01:01.0 Modem: Intel Corporation FA82537EP 56K V.92 Data/Fax Modem PCI (rev
> 04)
> Subsystem: Dell Device 1000
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
> Stepping+ SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 64 (250ns min, 15500ns max), Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 22
> Region 0: Memory at feafe000 (32-bit, non-prefetchable) [size=4K]
> Region 1: I/O ports at de00 [size=256]
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: serial
>
> 01:08.0 Ethernet controller: Intel Corporation 82562EZ 10/100 Ethernet
> Controller (rev 02)
> Subsystem: Dell Device 019d
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 64 (2000ns min, 14000ns max), Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 20
> Region 0: Memory at feaff000 (32-bit, non-prefetchable) [size=4K]
> Region 1: I/O ports at ddc0 [size=64]
> Capabilities: [dc] Power Management version 2
> Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=2 PME-
> Kernel driver in use: e100
> Kernel modules: e100, eepro100
>
> ryan@Ryan:~/intel-536-537$
>
>
> Looked good until I ran the command:
> sudo /usr/bin/lspci -vvv
> which still returns the value Kernel driver in use: serial for my modem (see
> the below quote):
>
> 01:01.0 Modem: Intel Corporation FA82537EP 56K V.92 Data/Fax Modem PCI (rev
> 04)
> Subsystem: Dell Device 1000
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
> Stepping+ SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 64 (250ns min, 15500ns max), Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 22
> Region 0: Memory at feafe000 (32-bit, non-prefetchable) [size=4K]
> Region 1: I/O ports at de00 [size=256]
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: serial
>
>
> So what do you suggest now? I have a feeling that we are very close.
>
> Ryan
>
>
> ----- Original Message -----
> From: Philippe Vouters
> To: Ryan
> Cc: Linmodems ; Marvin Stodolsky
> Sent: Saturday, June 27, 2009 6:21 PM
> Subject: Re: Can you try this coredrv.c ?
>
>
>
> Ryan,
>
> It is entirely my fault. Mankind has never been perfect and is subject to
> mistakes.
>
> Can you use the gedit editor like this:
>
> $ gedit intel-536-537/makefile_537
>
> and replace
>
> MODEM_TYPE=$(shell $(LSPCI)/lspci -n | gawk '{ \
>
> with
>
> MODEM_TYPE=$(shell $(LSPCI)/lspci -n | awk '{ \
>
> To control:
>
> Before the change:
>
> [philippe@victor ~]$ grep gawk intel-536-537/*
> intel-536-537/makefile_537:MODEM_TYPE=$(shell $(LSPCI)/lspci -n | gawk '{ \
>
> After the change:
>
> [philippe@victor ~]$ grep gawk intel-536-537/*/*
> [philippe@victor ~]$
> [philippe@victor ~]$ grep gawk intel-536-537/*
> [philippe@victor ~]$
>
> Deeply sorry about this.
>
> Afterwards,
>
> $ make 537
> $ sudo make uninstall
> $ sudo make install
> $ sudo /usr/bin/lspci -vvv
> -
> http://vouters.dyndns.org:8080/
> Philippe Vouters (Fontainebleau/France)
>
>
>
>
> Le samedi 27 juin 2009 à 17:36 +0100, Ryan a écrit :
> Hmm...
>
> Heres exactly what I did:
>
> 1. I downlaoded
> http://vouters.dyndns.org:8080/Intel/intel-536EP-537EP_2009_06_24.tar.bz2
> and moved it to my /home/ryan folder.
> 2. I ran: $ rm -rf /<your path>/intel536-537/
> 3. I ran: $ tar -jxvf intel-536EP-537EP_2009_06_24.tar.bz2
> 4. I ran:
> $ cd intel-536-537/
> $ make 537
> $ sudo make uninstall
> $ sudo make install
> $ sudo lspci -vvv
> 5. I ran: $ grep serial /var/log/messages | tail -f
>
> Heres what it all looks like:
> ryan@Ryan:~$ rm -rf intel-536-537/
> ryan@Ryan:~$ tar -jxvf intel-536EP-537EP_2009_06_24.tar.bz2
> intel-536-537/
> intel-536-537/Intel536_inst
> intel-536-537/hamregistry
> intel-536-537/537_boot
> intel-536-537/coredrv/
> intel-536-537/coredrv/clmmain.c
> intel-536-537/coredrv/afedsp_int.h
> intel-536-537/coredrv/softserial_io.c
> intel-536-537/coredrv/537core.lib
> intel-536-537/coredrv/afedsp_int.c
> intel-536-537/coredrv/task.c
> intel-536-537/coredrv/536core.lib
> intel-536-537/coredrv/uart.c
> intel-536-537/coredrv/lock_lin.h
> intel-536-537/coredrv/locks.c
> intel-536-537/coredrv/softserial.h
> intel-536-537/coredrv/sys_ver.h
> intel-536-537/coredrv/wwh_dflt.h
> intel-536-537/coredrv/softserial_ioctl.c
> intel-536-537/coredrv/softserial.c
> intel-536-537/coredrv/tasker.h
> intel-536-537/coredrv/uart.h
> intel-536-537/coredrv/hamcore.h
> intel-536-537/coredrv/rts.c
> intel-536-537/coredrv/softcore.h
> intel-536-537/coredrv/coredrv.c
> intel-536-537/coredrv/rts.h
> intel-536-537/coredrv/hamdefs.h
> intel-536-537/coredrv/Makefile
> intel-536-537/coredrv/wwh_dflt.c
> intel-536-537/537_inst
> intel-536-537/makefile_536
> intel-536-537/Intel536_boot
> intel-536-537/makefile_537
> intel-536-537/license.txt
> intel-536-537/usrsound
> intel-536-537/config_check
> intel-536-537/makefile
> intel-536-537/readme.txt
> ryan@Ryan:~$ cd intel-536-537/
> ryan@Ryan:~/intel-536-537$ make 537
> cd coredrv; make clean
> make[1]: Entering directory `/home/ryan/intel-536-537/coredrv'
> rm -f *.ko .*.o.cmd *.mod.c .*.ko.cmd *.o *~ core Module.* modules.*
> rm -rf .tmp_versions
> make[1]: Leaving directory `/home/ryan/intel-536-537/coredrv'
> rm -f *.o *.ko
> Module precompile check
> Current running kernel is: 2.6.28-11-generic
> /lib/modules... autoconf.h exists
> diff: /boot/vmlinuz.autoconf.h: No such file or directory
> autoconf.h matches running kernel
> diff: /boot/vmlinuz.version.h: No such file or directory
> version.h matches running kernel
> /bin/bash: gawk: command not found
> /bin/bash: gawk: command not found
> /bin/bash: gawk: command not found
> /bin/bash: gawk: command not found
> /bin/bash: gawk: command not found
> make[1]: Entering directory `/home/ryan/intel-536-537'
> Modem type not determined.
> $ export MODEM_TYPE=<type>
> with type=537 or 537EP or 537SP or 537EA or 537AA
> make[1]: Leaving directory `/home/ryan/intel-536-537'
> ryan@Ryan:~/intel-536-537$ sudo make uninstall
> [sudo] password for ryan:
> ryan@Ryan:~/intel-536-537$ sudo make install
> ryan@Ryan:~/intel-536-537$ sudo lspci -vvv
> 00:00.0 Host bridge: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub
> Interface (rev 02)
> Subsystem: Dell Device 019d
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort+ >SERR- <PERR- INTx-
> Latency: 0
> Region 0: Memory at f8000000 (32-bit, prefetchable) [size=32M]
> Capabilities: [e4] Vendor Specific Information <?>
> Kernel driver in use: agpgart-intel
> Kernel modules: intel-agp
>
> 00:02.0 VGA compatible controller: Intel Corporation 82865G Integrated
> Graphics Controller (rev 02)
> Subsystem: Dell Device 019d
> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Interrupt: pin A routed to IRQ 11
> Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
> Region 1: Memory at feb80000 (32-bit, non-prefetchable) [size=512K]
> Region 2: I/O ports at ed98 [size=8]
> Capabilities: [d0] Power Management version 1
> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Kernel modules: intelfb
>
> 00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI
> Controller #1 (rev 02)
> Subsystem: Dell Device 019d
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 16
> Region 4: I/O ports at ff80 [size=32]
> Kernel driver in use: uhci_hcd
>
> 00:1d.1 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI
> Controller #2 (rev 02)
> Subsystem: Dell Device 019d
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin B routed to IRQ 19
> Region 4: I/O ports at ff60 [size=32]
> Kernel driver in use: uhci_hcd
>
> 00:1d.3 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI
> Controller #4 (rev 02)
> Subsystem: Dell Device 019d
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 16
> Region 4: I/O ports at ff20 [size=32]
> Kernel driver in use: uhci_hcd
>
> 00:1d.7 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI
> Controller (rev 02) (prog-if 20)
> Subsystem: Dell Device 019d
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin D routed to IRQ 23
> Region 0: Memory at ffa80800 (32-bit, non-prefetchable) [size=1K]
> Capabilities: [50] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [58] Debug port: BAR=1 offset=00a0
> Kernel driver in use: ehci_hcd
>
> 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2)
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
> I/O behind bridge: 0000d000-0000dfff
> Memory behind bridge: fea00000-feafffff
> Prefetchable memory behind bridge: fff00000-000fffff
> Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
> <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Kernel modules: shpchp
>
> 00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface
> Bridge (rev 02)
> Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Kernel modules: iTCO_wdt, intel-rng
>
> 00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE
> Controller (rev 02) (prog-if 8a [Master SecP PriP])
> Subsystem: Dell Device 019d
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 18
> Region 0: I/O ports at 01f0 [size=8]
> Region 1: I/O ports at 03f4 [size=1]
> Region 2: I/O ports at 0170 [size=8]
> Region 3: I/O ports at 0374 [size=1]
> Region 4: I/O ports at ffa0 [size=16]
> Region 5: Memory at feb7fc00 (32-bit, non-prefetchable) [size=1K]
> Kernel driver in use: ata_piix
>
> 00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller
> (rev 02)
> Subsystem: Dell Device 019d
> Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Interrupt: pin B routed to IRQ 3
> Region 4: I/O ports at eda0 [size=32]
> Kernel modules: i2c-i801
>
> 00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER
> (ICH5/ICH5R) AC'97 Audio Controller (rev 02)
> Subsystem: Dell Device 019d
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin B routed to IRQ 17
> Region 0: I/O ports at ee00 [size=256]
> Region 1: I/O ports at edc0 [size=64]
> Region 2: Memory at feb7fa00 (32-bit, non-prefetchable) [size=512]
> Region 3: Memory at feb7f900 (32-bit, non-prefetchable) [size=256]
> Capabilities: [50] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: Intel ICH
> Kernel modules: snd-intel8x0
>
> 01:01.0 Modem: Intel Corporation FA82537EP 56K V.92 Data/Fax Modem PCI (rev
> 04)
> Subsystem: Dell Device 1000
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
> Stepping+ SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 64 (250ns min, 15500ns max), Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 22
> Region 0: Memory at feafe000 (32-bit, non-prefetchable) [size=4K]
> Region 1: I/O ports at de00 [size=256]
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: serial
>
> 01:08.0 Ethernet controller: Intel Corporation 82562EZ 10/100 Ethernet
> Controller (rev 02)
> Subsystem: Dell Device 019d
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 64 (2000ns min, 14000ns max), Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 20
> Region 0: Memory at feaff000 (32-bit, non-prefetchable) [size=4K]
> Region 1: I/O ports at ddc0 [size=64]
> Capabilities: [dc] Power Management version 2
> Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=2 PME-
> Kernel driver in use: e100
> Kernel modules: e100, eepro100
>
> ryan@Ryan:~/intel-536-537$ dmesg | tail -f
> [ 14.331700] type=1505 audit(1246119551.399:6): operation="profile_load"
> name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2130
> [ 14.489685] type=1505 audit(1246119551.559:7): operation="profile_load"
> name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2135
> [ 14.490004] type=1505 audit(1246119551.559:8): operation="profile_load"
> name="/usr/sbin/cupsd" name2="default" pid=2135
> [ 14.523834] type=1505 audit(1246119551.591:9): operation="profile_load"
> name="/usr/sbin/tcpdump" name2="default" pid=2139
> [ 17.533682] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
> [ 17.533687] Bluetooth: BNEP filters: protocol multicast
> [ 17.575098] Bridge firewalling registered
> [ 20.208904] ppdev0: registered pardevice
> [ 20.250258] ppdev0: unregistered pardevice
> [ 22.945876] ADDRCONF(NETDEV_UP): eth0: link is not ready
>
> ryan@Ryan:~$ grep serial /var/log/messages | tail -f
> Jun 27 17:09:12 Ryan kernel: [ 1.983682] Couldn't register serial port
> 0000:01:01.0: -28
> Jun 27 17:09:12 Ryan kernel: [ 2.421376] usbcore: registered new
> interface driver usbserial
> Jun 27 17:09:12 Ryan kernel: [ 2.421409] usbcore: registered new
> interface driver usbserial_generic
> Jun 27 17:09:12 Ryan kernel: [ 2.421412] usbserial: USB Serial Driver
> core
> Jun 27 17:19:12 Ryan kernel: [ 1.986165] serial8250: ttyS0 at I/O 0x3f8
> (irq = 4) is a 16550A
> Jun 27 17:19:12 Ryan kernel: [ 1.986694] serial 0000:01:01.0: PCI INT
> A -> GSI 22 (level, low) -> IRQ 22
> Jun 27 17:19:12 Ryan kernel: [ 1.986982] Couldn't register serial port
> 0000:01:01.0: -28
> Jun 27 17:19:12 Ryan kernel: [ 2.425388] usbcore: registered new
> interface driver usbserial
> Jun 27 17:19:12 Ryan kernel: [ 2.425422] usbcore: registered new
> interface driver usbserial_generic
> Jun 27 17:19:12 Ryan kernel: [ 2.425425] usbserial: USB Serial Driver
> core
>
>
> As you can see the Kernel driver in use: serial still.
> Should I try to connect now anyway?
>
> Have you any other suggestions?
>
> Ryan
>
> ----- Original Message -----
> From: "Philippe Vouters" <Philippe.Vouters@xxxxxxxxxxx>
> To: "Ryan" <ryanmckeown@xxxxxxxxxxx>
> Sent: Friday, June 26, 2009 3:08 PM
> Subject: Re: Can you try this coredrv.c ?
>
>
> Ryan,
>
> Good ! You have awk installed on your system.
> In order to start up with clean files, I suggest you
> change your path to the root path of your intel-536-537/ directory.
> Then :
> $ rm -rf intel-536-537/
> and you detar what you downloaded from my site using the provided tar
> command.
> Afterwards :
> $ cd intel-536-537/
> $ make 537
> the above should only give one warning.
> $ sudo make uninstall
> $ sudo make install
> $ sudo lspci -vvv
> -
> http://vouters.dyndns.org:8080/
> Philippe Vouters (Fontainebleau/France)
>
>
> Le vendredi 26 juin 2009 à 14:23 +0100, Ryan a écrit :
> > Philippe.
> >
> > Ok, I did the test and it return just like yours,
> > /usr/bin/awk
> >
> > So now I downlaod from the link you gave me, run the commands again
> > (replacing /sbin/lspci with /usr/bin/lspci) and then run
> > $ rm -rf /<your path>/intel536-537/
> >
> > Is that correct?
> >
> >
> > Ryan
> > ----- Original Message -----
> > From: "Philippe Vouters" <Philippe.Vouters@xxxxxxxxxxx>
> > To: "Ryan" <ryanmckeown@xxxxxxxxxxx>
> > Cc: "Linmodems" <discuss@xxxxxxxxxxxxx>
> > Sent: Wednesday, June 24, 2009 5:02 PM
> > Subject: Re: Can you try this coredrv.c ?
> >
> >
> > > Ryan,
> > >
> > > Before you search for gawk, make the following test from your Linux
> > > account:
> > > [philippe@victor intel-536-537]$ which awk
> > > /usr/bin/awk
> > > This kind of answer shows you can use awk instead of gawk.
> > > If this is the case, you:
> > > $ rm -rf /<your path>/intel536-537/
> > > You download from my site:
> > > http://vouters.dyndns.org:8080/Intel/intel-536EP-537EP_2009_06_24.tar.bz2
> > > (the file name has changed to remain consistent with previous files and
> > > gawk has been replaced by awk in makefile_537).
> > > And you restart all the commands I sent you meanwhile replacing those
> > > containing
> > > /sbin/lspci
> > > with
> > > /usr/bin/lspci
> > > Yours sincerely,
> > > -
> > > http://vouters.dyndns.org:8080/
> > > Philippe Vouters (Fontainebleau/France)
> > >
> > >
> > > Le mercredi 24 juin 2009 à 16:09 +0100, Ryan a écrit :
> > >> Hmm...
> > >>
> > >> I don't have gawk, I'll search and see if I can get it. Might take a
> > >> while
> > >> by the time I find it, take down the dependencies, see if I have them
> > >> on
> > >> Linux already, etc. and it involves a lot of switching between OS.
> > >> I do have the gcc compiler I think. (I have gcc, libgcc1, gcc-4.3-base
> > >> and
> > >> gcc-4.3).
> > >>
> > >> $ which lspci
> > >> returns:
> > >> /usr/bin/lspci
> > >>
> > >>
> > >> Ryan.
> > >> ----- Original Message -----
> > >> From: "Philippe Vouters" <Philippe.Vouters@xxxxxxxxxxx>
> > >> To: "Ryan" <ryanmckeown@xxxxxxxxxxx>
> > >> Cc: "Linmodems" <discuss@xxxxxxxxxxxxx>; "Marvin Stodolsky"
> > >> <marvin.stodolsky@xxxxxxxxx>
> > >> Sent: Tuesday, June 23, 2009 7:45 PM
> > >> Subject: Re: Can you try this coredrv.c ?
> > >>
> > >>
> > >> > Ryan,
> > >> >
> > >> > Can you install gawk on your system from your Linux distribution CD ?
> > >> > Do you even have the gcc compiler ? Can you perform the command
> > >> > $ which lspci
> > >> > from a root account ?
> > >> > It almost impossible to give correct advices to you.
> > >> > -
> > >> > http://www.linkedin.com/pub/philippe-vouters/a/456/a87
> > >> > Philippe Vouters (Fontainebleau/France)
> > >> >
> > >> >
> > >> > Le mardi 23 juin 2009 à 19:27 +0100, Ryan a écrit :
> > >> >> Ok.
> > >> >>
> > >> >> Heres what the terminal looks like...
> > >> >>
> > >> >> ryan@Ryan:~$ tar -jxvf intel-536-537_2009_06_22.tar.bz2
> > >> >> intel-536-537/
> > >> >> intel-536-537/537_inst
> > >> >> intel-536-537/coredrv/
> > >> >> intel-536-537/coredrv/coredrv.c
> > >> >> intel-536-537/coredrv/wwh_dflt.c
> > >> >> intel-536-537/coredrv/hamcore.h
> > >> >> intel-536-537/coredrv/537core.lib
> > >> >> intel-536-537/coredrv/sys_ver.h
> > >> >> intel-536-537/coredrv/uart.h
> > >> >> intel-536-537/coredrv/locks.c
> > >> >> intel-536-537/coredrv/clmmain.c
> > >> >> intel-536-537/coredrv/hamdefs.h
> > >> >> intel-536-537/coredrv/uart.c
> > >> >> intel-536-537/coredrv/task.c
> > >> >> intel-536-537/coredrv/afedsp_int.h
> > >> >> intel-536-537/coredrv/softserial_io.c
> > >> >> intel-536-537/coredrv/Makefile
> > >> >> intel-536-537/coredrv/afedsp_int.c
> > >> >> intel-536-537/coredrv/softserial.h
> > >> >> intel-536-537/coredrv/softcore.h
> > >> >> intel-536-537/coredrv/softserial.c
> > >> >> intel-536-537/coredrv/536core.lib
> > >> >> intel-536-537/coredrv/lock_lin.h
> > >> >> intel-536-537/coredrv/rts.c
> > >> >> intel-536-537/coredrv/rts.h
> > >> >> intel-536-537/coredrv/softserial_ioctl.c
> > >> >> intel-536-537/coredrv/wwh_dflt.h
> > >> >> intel-536-537/coredrv/tasker.h
> > >> >> intel-536-537/makefile
> > >> >> intel-536-537/Intel536_boot
> > >> >> intel-536-537/hamregistry
> > >> >> intel-536-537/readme.txt
> > >> >> intel-536-537/Intel536_inst
> > >> >> intel-536-537/config_check
> > >> >> intel-536-537/.makefile_537.swp
> > >> >> intel-536-537/537_boot
> > >> >> intel-536-537/license.txt
> > >> >> intel-536-537/usrsound
> > >> >> intel-536-537/makefile_537
> > >> >> intel-536-537/makefile_536
> > >> >> ryan@Ryan:~$ cd intel-536-537
> > >> >> ryan@Ryan:~/intel-536-537$ make clean
> > >> >> cd coredrv; make clean
> > >> >> make[1]: Entering directory `/home/ryan/intel-536-537/coredrv'
> > >> >> rm -f *.ko .*.o.cmd *.mod.c .*.ko.cmd *.o *~ core Module.* modules.*
> > >> >> rm -rf .tmp_versions
> > >> >> make[1]: Leaving directory `/home/ryan/intel-536-537/coredrv'
> > >> >> rm -f *.o *.ko
> > >> >> ryan@Ryan:~/intel-536-537$ make 537
> > >> >> cd coredrv; make clean
> > >> >> make[1]: Entering directory `/home/ryan/intel-536-537/coredrv'
> > >> >> rm -f *.ko .*.o.cmd *.mod.c .*.ko.cmd *.o *~ core Module.* modules.*
> > >> >> rm -rf .tmp_versions
> > >> >> make[1]: Leaving directory `/home/ryan/intel-536-537/coredrv'
> > >> >> rm -f *.o *.ko
> > >> >> Module precompile check
> > >> >> Current running kernel is: 2.6.28-11-generic
> > >> >> /lib/modules... autoconf.h exists
> > >> >> diff: /boot/vmlinuz.autoconf.h: No such file or directory
> > >> >> autoconf.h matches running kernel
> > >> >> diff: /boot/vmlinuz.version.h: No such file or directory
> > >> >> version.h matches running kernel
> > >> >> /bin/bash: gawk: command not found
> > >> >> /bin/bash: gawk: command not found
> > >> >> /bin/bash: gawk: command not found
> > >> >> /bin/bash: gawk: command not found
> > >> >> /bin/bash: gawk: command not found
> > >> >> make[1]: Entering directory `/home/ryan/intel-536-537'
> > >> >> Modem type not determined.
> > >> >> $ export MODEM_TYPE=<type>
> > >> >> with type=537 or 537EP or 537SP or 537EA or 537AA
> > >> >> make[1]: Leaving directory `/home/ryan/intel-536-537'
> > >> >> ryan@Ryan:~/intel-536-537$ sudo make uninstall
> > >> >> [sudo] password for ryan:
> > >> >> ryan@Ryan:~/intel-536-537$ sudo make install
> > >> >> ryan@Ryan:~/intel-536-537$
> > >> >>
> > >> >>
> > >> >> Looked pretty fine. Then as instructed, I tried
> > >> >> $ dmesg | tail -f
> > >> >> and heres what the terminal looks like...
> > >> >>
> > >> >> ryan@Ryan:~/intel-536-537$ dmesg | tail -f
> > >> >> [ 14.687916] type=1505 audit(1245780532.759:6):
> > >> >> operation="profile_load"
> > >> >> name="/usr/lib/connman/scripts/dhclient-script" name2="default"
> > >> >> pid=2118
> > >> >> [ 14.847324] type=1505 audit(1245780532.919:7):
> > >> >> operation="profile_load"
> > >> >> name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2123
> > >> >> [ 14.847632] type=1505 audit(1245780532.919:8):
> > >> >> operation="profile_load"
> > >> >> name="/usr/sbin/cupsd" name2="default" pid=2123
> > >> >> [ 14.881506] type=1505 audit(1245780532.955:9):
> > >> >> operation="profile_load"
> > >> >> name="/usr/sbin/tcpdump" name2="default" pid=2127
> > >> >> [ 17.749175] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
> > >> >> [ 17.749179] Bluetooth: BNEP filters: protocol multicast
> > >> >> [ 17.784968] Bridge firewalling registered
> > >> >> [ 20.708493] ppdev0: registered pardevice
> > >> >> [ 20.756256] ppdev0: unregistered pardevice
> > >> >> [ 22.941878] ADDRCONF(NETDEV_UP): eth0: link is not ready
> > >> >>
> > >> >>
> > >> >> Then the command
> > >> >> sudo /sbin/lspci -vvv
> > >> >> With the terminal like...
> > >> >>
> > >> >> ryan@Ryan:~/intel-536-537$ sudo /sbin/lspci -vvv
> > >> >> [sudo] password for ryan:
> > >> >> sudo: /sbin/lspci: command not found
> > >> >> ryan@Ryan:~/intel-536-537$
> > >> >>
> > >> >>
> > >> >> And with...
> > >> >> $ grep serial /var/log/messages | tail -f
> > >> >>
> > >> >> ryan@Ryan:~/intel-536-537$ grep serial /var/log/messages | tail -f
> > >> >> Jun 22 20:45:35 Ryan kernel: [ 1.976835] Couldn't register serial
> > >> >> port
> > >> >> 0000:01:01.0: -28
> > >> >> Jun 22 20:45:35 Ryan kernel: [ 2.421386] usbcore: registered new
> > >> >> interface driver usbserial
> > >> >> Jun 22 20:45:35 Ryan kernel: [ 2.421420] usbcore: registered new
> > >> >> interface driver usbserial_generic
> > >> >> Jun 22 20:45:35 Ryan kernel: [ 2.421423] usbserial: USB Serial
> > >> >> Driver
> > >> >> core
> > >> >> Jun 23 19:08:53 Ryan kernel: [ 1.982975] serial8250: ttyS0 at I/O
> > >> >> 0x3f8
> > >> >> (irq = 4) is a 16550A
> > >> >> Jun 23 19:08:53 Ryan kernel: [ 1.983438] serial 0000:01:01.0: PCI
> > >> >> INT
> > >> >> A -> GSI 22 (level, low) -> IRQ 22
> > >> >> Jun 23 19:08:53 Ryan kernel: [ 1.983723] Couldn't register serial
> > >> >> port
> > >> >> 0000:01:01.0: -28
> > >> >> Jun 23 19:08:53 Ryan kernel: [ 2.421380] usbcore: registered new
> > >> >> interface driver usbserial
> > >> >> Jun 23 19:08:53 Ryan kernel: [ 2.421414] usbcore: registered new
> > >> >> interface driver usbserial_generic
> > >> >> Jun 23 19:08:53 Ryan kernel: [ 2.421417] usbserial: USB Serial
> > >> >> Driver
> > >> >> core
> > >> >>
> > >> >>
> > >> >> And with:
> > >> >> $ lspci -vvv
> > >> >> The terminal is like this:
> > >> >>
> > >> >> ryan@Ryan:~/intel-536-537$ lspci -vvv
> > >> >> 00:00.0 Host bridge: Intel Corporation 82865G/PE/P DRAM
> > >> >> Controller/Host-Hub
> > >> >> Interface (rev 02)
> > >> >> Subsystem: Dell Device 019d
> > >> >> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> > >> >> Stepping- SERR+ FastB2B- DisINTx-
> > >> >> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> > >> >> <TAbort-
> > >> >> <MAbort+ >SERR- <PERR- INTx-
> > >> >> Latency: 0
> > >> >> Region 0: Memory at f8000000 (32-bit, prefetchable) [size=32M]
> > >> >> Capabilities: <access denied>
> > >> >> Kernel driver in use: agpgart-intel
> > >> >> Kernel modules: intel-agp
> > >> >>
> > >> >> 00:02.0 VGA compatible controller: Intel Corporation 82865G
> > >> >> Integrated
> > >> >> Graphics Controller (rev 02)
> > >> >> Subsystem: Dell Device 019d
> > >> >> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> > >> >> Stepping- SERR- FastB2B- DisINTx-
> > >> >> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> > >> >> <TAbort-
> > >> >> <MAbort- >SERR- <PERR- INTx-
> > >> >> Interrupt: pin A routed to IRQ 11
> > >> >> Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
> > >> >> Region 1: Memory at feb80000 (32-bit, non-prefetchable) [size=512K]
> > >> >> Region 2: I/O ports at ed98 [size=8]
> > >> >> Capabilities: <access denied>
> > >> >> Kernel modules: intelfb
> > >> >>
> > >> >> 00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R)
> > >> >> USB
> > >> >> UHCI
> > >> >> Controller #1 (rev 02)
> > >> >> Subsystem: Dell Device 019d
> > >> >> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> > >> >> Stepping- SERR- FastB2B- DisINTx-
> > >> >> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> > >> >> <TAbort-
> > >> >> <MAbort- >SERR- <PERR- INTx-
> > >> >> Latency: 0
> > >> >> Interrupt: pin A routed to IRQ 16
> > >> >> Region 4: I/O ports at ff80 [size=32]
> > >> >> Kernel driver in use: uhci_hcd
> > >> >>
> > >> >> 00:1d.1 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R)
> > >> >> USB
> > >> >> UHCI
> > >> >> Controller #2 (rev 02)
> > >> >> Subsystem: Dell Device 019d
> > >> >> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> > >> >> Stepping- SERR- FastB2B- DisINTx-
> > >> >> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> > >> >> <TAbort-
> > >> >> <MAbort- >SERR- <PERR- INTx-
> > >> >> Latency: 0
> > >> >> Interrupt: pin B routed to IRQ 19
> > >> >> Region 4: I/O ports at ff60 [size=32]
> > >> >> Kernel driver in use: uhci_hcd
> > >> >>
> > >> >> 00:1d.3 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R)
> > >> >> USB
> > >> >> UHCI
> > >> >> Controller #4 (rev 02)
> > >> >> Subsystem: Dell Device 019d
> > >> >> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> > >> >> Stepping- SERR- FastB2B- DisINTx-
> > >> >> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> > >> >> <TAbort-
> > >> >> <MAbort- >SERR- <PERR- INTx-
> > >> >> Latency: 0
> > >> >> Interrupt: pin A routed to IRQ 16
> > >> >> Region 4: I/O ports at ff20 [size=32]
> > >> >> Kernel driver in use: uhci_hcd
> > >> >>
> > >> >> 00:1d.7 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R)
> > >> >> USB2
> > >> >> EHCI
> > >> >> Controller (rev 02) (prog-if 20)
> > >> >> Subsystem: Dell Device 019d
> > >> >> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> > >> >> Stepping- SERR+ FastB2B- DisINTx-
> > >> >> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> > >> >> <TAbort-
> > >> >> <MAbort- >SERR- <PERR- INTx-
> > >> >> Latency: 0
> > >> >> Interrupt: pin D routed to IRQ 23
> > >> >> Region 0: Memory at ffa80800 (32-bit, non-prefetchable) [size=1K]
> > >> >> Capabilities: <access denied>
> > >> >> Kernel driver in use: ehci_hcd
> > >> >>
> > >> >> 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2)
> > >> >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> > >> >> Stepping- SERR+ FastB2B- DisINTx-
> > >> >> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> > >> >> <TAbort-
> > >> >> <MAbort- >SERR- <PERR- INTx-
> > >> >> Latency: 0
> > >> >> Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
> > >> >> I/O behind bridge: 0000d000-0000dfff
> > >> >> Memory behind bridge: fea00000-feafffff
> > >> >> Prefetchable memory behind bridge: fff00000-000fffff
> > >> >> Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> > >> >> <TAbort-
> > >> >> <MAbort- <SERR- <PERR-
> > >> >> BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
> > >> >> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> > >> >> Kernel modules: shpchp
> > >> >>
> > >> >> 00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC
> > >> >> Interface
> > >> >> Bridge (rev 02)
> > >> >> Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
> > >> >> Stepping- SERR+ FastB2B- DisINTx-
> > >> >> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> > >> >> <TAbort-
> > >> >> <MAbort- >SERR- <PERR- INTx-
> > >> >> Latency: 0
> > >> >> Kernel modules: iTCO_wdt, intel-rng
> > >> >>
> > >> >> 00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE
> > >> >> Controller (rev 02) (prog-if 8a [Master SecP PriP])
> > >> >> Subsystem: Dell Device 019d
> > >> >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> > >> >> Stepping- SERR- FastB2B- DisINTx-
> > >> >> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> > >> >> <TAbort-
> > >> >> <MAbort- >SERR- <PERR- INTx-
> > >> >> Latency: 0
> > >> >> Interrupt: pin A routed to IRQ 18
> > >> >> Region 0: I/O ports at 01f0 [size=8]
> > >> >> Region 1: I/O ports at 03f4 [size=1]
> > >> >> Region 2: I/O ports at 0170 [size=8]
> > >> >> Region 3: I/O ports at 0374 [size=1]
> > >> >> Region 4: I/O ports at ffa0 [size=16]
> > >> >> Region 5: Memory at feb7fc00 (32-bit, non-prefetchable) [size=1K]
> > >> >> Kernel driver in use: ata_piix
> > >> >>
> > >> >> 00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus
> > >> >> Controller
> > >> >> (rev 02)
> > >> >> Subsystem: Dell Device 019d
> > >> >> Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> > >> >> Stepping- SERR- FastB2B- DisINTx-
> > >> >> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> > >> >> <TAbort-
> > >> >> <MAbort- >SERR- <PERR- INTx-
> > >> >> Interrupt: pin B routed to IRQ 3
> > >> >> Region 4: I/O ports at eda0 [size=32]
> > >> >> Kernel modules: i2c-i801
> > >> >>
> > >> >> 00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER
> > >> >> (ICH5/ICH5R) AC'97 Audio Controller (rev 02)
> > >> >> Subsystem: Dell Device 019d
> > >> >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> > >> >> Stepping- SERR- FastB2B- DisINTx-
> > >> >> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> > >> >> <TAbort-
> > >> >> <MAbort- >SERR- <PERR- INTx-
> > >> >> Latency: 0
> > >> >> Interrupt: pin B routed to IRQ 17
> > >> >> Region 0: I/O ports at ee00 [size=256]
> > >> >> Region 1: I/O ports at edc0 [size=64]
> > >> >> Region 2: Memory at feb7fa00 (32-bit, non-prefetchable) [size=512]
> > >> >> Region 3: Memory at feb7f900 (32-bit, non-prefetchable) [size=256]
> > >> >> Capabilities: <access denied>
> > >> >> Kernel driver in use: Intel ICH
> > >> >> Kernel modules: snd-intel8x0
> > >> >>
> > >> >> 01:01.0 Modem: Intel Corporation FA82537EP 56K V.92 Data/Fax Modem
> > >> >> PCI
> > >> >> (rev
> > >> >> 04)
> > >> >> Subsystem: Dell Device 1000
> > >> >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
> > >> >> Stepping+ SERR+ FastB2B- DisINTx-
> > >> >> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> > >> >> <TAbort-
> > >> >> <MAbort- >SERR- <PERR- INTx-
> > >> >> Latency: 64 (250ns min, 15500ns max), Cache Line Size: 64 bytes
> > >> >> Interrupt: pin A routed to IRQ 22
> > >> >> Region 0: Memory at feafe000 (32-bit, non-prefetchable) [size=4K]
> > >> >> Region 1: I/O ports at de00 [size=256]
> > >> >> Capabilities: <access denied>
> > >> >> Kernel driver in use: serial
> > >> >>
> > >> >> 01:08.0 Ethernet controller: Intel Corporation 82562EZ 10/100
> > >> >> Ethernet
> > >> >> Controller (rev 02)
> > >> >> Subsystem: Dell Device 019d
> > >> >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
> > >> >> Stepping- SERR+ FastB2B- DisINTx-
> > >> >> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> > >> >> <TAbort-
> > >> >> <MAbort- >SERR- <PERR- INTx-
> > >> >> Latency: 64 (2000ns min, 14000ns max), Cache Line Size: 64 bytes
> > >> >> Interrupt: pin A routed to IRQ 20
> > >> >> Region 0: Memory at feaff000 (32-bit, non-prefetchable) [size=4K]
> > >> >> Region 1: I/O ports at ddc0 [size=64]
> > >> >> Capabilities: <access denied>
> > >> >> Kernel driver in use: e100
> > >> >> Kernel modules: e100, eepro100
> > >> >>
> > >> >> ryan@Ryan:~/intel-536-537$
> > >> >>
> > >> >>
> > >> >> And by retrying the efax command, I get this...
> > >> >>
> > >> >> ryan@Ryan:~/efax$ ./efax -vewinchmart
> > >> >> ./efax: Tue Jun 23 19:18:47 2009 efax v 0.9a-001114 Copyright 1999
> > >> >> Ed
> > >> >> Casas
> > >> >> ./efax: Tue Jun 23 19:18:47 2009 efax v 0.9a-001114 Copyright 1999
> > >> >> Ed
> > >> >> Casas
> > >> >> efax: 18:47 compiled Jun 19 2009 11:00:46
> > >> >> efax: 18:47 argv[0]=./efax
> > >> >> efax: 18:47 argv[1]=-vewinchmart
> > >> >> efax: 18:47 using built-in 128x0 font
> > >> >> efax: 18:47 Error: can't open serial port /dev/modem: No such file
> > >> >> or
> > >> >> directory
> > >> >> efax: 18:47 done, returning 2 (unrecoverable error)
> > >> >>
> > >> >>
> > >> >> Ok, so what now?
> > >> >> Ryan
> > >> >>
> > >> >> ----- Original Message -----
> > >> >> From: "Philippe Vouters" <Philippe.Vouters@xxxxxxxxxxx>
> > >> >> To: "Ryan" <ryanmckeown@xxxxxxxxxxx>
> > >> >> Cc: "Linmodems" <discuss@xxxxxxxxxxxxx>; "Marvin Stodolsky"
> > >> >> <marvin.stodolsky@xxxxxxxxx>
> > >> >> Sent: Monday, June 22, 2009 8:20 PM
> > >> >> Subject: Re: Can you try this coredrv.c ?
> > >> >>
> > >> >>
> > >> >> > Dear Ryan,
> > >> >> >
> > >> >> > Your case does NOT look desperate at all. efax looks to be very
> > >> >> > correctly responding.
> > >> >> >
> > >> >> > However should I suggest you to download my latest modifications
> > >> >> > from
> > >> >> > http://vouters.dyndns.org:8080/Intel/intel-536-537_2009_06_22.tar.bz2
> > >> >> >
> > >> >> > The very same as Tapan Chugh in India, the 537 driver does
> > >> >> > conflict
> > >> >> > on
> > >> >> > your system with the 8250_pci kernel driver which cannot be
> > >> >> > unloaded.
> > >> >> > This 8250_pci driver allocates the serial ports for its own use
> > >> >> > early
> > >> >> > in
> > >> >> > the Linux boot process. The problem with this 8250_pci driver is
> > >> >> > that
> > >> >> > it
> > >> >> > knows nothing from an Intel 537 modem.
> > >> >> >
> > >> >> > And the most difficult thing I have to solve is how to correctly
> > >> >> > to
> > >> >> > get
> > >> >> > rid of this conflicting driver without being compelled to rebuild
> > >> >> > the
> > >> >> > Linux kernel without 8250_PCI support.
> > >> >> >
> > >> >> > Providing you download the latest above driver source code, you
> > >> >> > would,
> > >> >> > from your user account, type in the following commands:
> > >> >> >
> > >> >> > $ tar -jxvf intel-536-537_2009_06_22.tar.bz2
> > >> >> > $ make clean
> > >> >> > $ make 537
> > >> >> > The above command ought to give only one warning.
> > >> >> > $ sudo make uninstall
> > >> >> > $ sudo make install
> > >> >> > You should then check whether the driver correctly installed with:
> > >> >> > $ dmesg | tail -f
> > >> >> > You can check whether the 8250_pci driver correctly got
> > >> >> > unregistered
> > >> >> > by
> > >> >> > the Intel 537 driver with:
> > >> >> > sudo /sbin/lspci -vvv
> > >> >> > and perhaps with:
> > >> >> > $ grep serial /var/log/messages | tail -f
> > >> >> > If everything goes as expected you shouldn't read "serial" any
> > >> >> > longer
> > >> >> > with $ lspci -vvv as the kernel driver for your 537 modem board.
> > >> >> >
> > >> >> > Providing you see everything goes well as supposed it should, you
> > >> >> > may
> > >> >> > retry the efax command. You may further recheck with
> > >> >> > $ dmesg | tail -f
> > >> >> > Yours sincerely,
> > >> >> > --
> > >> >> > http://www.linkedin.com/pub/philippe-vouters/a/456/a87
> > >> >> > Philippe Vouters (Fontainebleau/France)
> > >> >> >> Ok.
> > >> >> >>
> > >> >> >> First of all, sorry I've been away for so long, I was away for
> > >> >> >> the
> > >> >> >> most
> > >> >> >> of
> > >> >> >> the weekend and only really got back here to find that you guys
> > >> >> >> had
> > >> >> >> left
> > >> >> >> me
> > >> >> >> a load of emails. Ok, thanks for all your help, and heres what
> > >> >> >> I've
> > >> >> >> got.
> > >> >> >> It's clearly not worked and if I've missed anything then please
> > >> >> >> do
> > >> >> >> tell
> > >> >> >> me.
> > >> >> >>
> > >> >> >> Ok, when I run "./efax -vewinchmart" I get the following:
> > >> >> >>
> > >> >> >> ./efax: Mon Jun 22 18:41:06 2009 efax v 0.9a-001114 Copyright
> > >> >> >> 1999
> > >> >> >> Ed
> > >> >> >> Casas
> > >> >> >> ./efax: Mon Jun 22 18:41:06 2009 efax v 0.9a-001114 Copyright
> > >> >> >> 1999
> > >> >> >> Ed
> > >> >> >> Casas
> > >> >> >> efax: 41:06 compiled Jun 19 2009 11:00:46
> > >> >> >> efax: 41:06 argv[0]=./efax
> > >> >> >> efax: 41:06 argv[1]=-vewinchmart
> > >> >> >> efax: 41:06 using built-in 128x0 font
> > >> >> >> efax: 41:08 opened /dev/modem
> > >> >> >> efax: 41:08 command "Q0V1"
> > >> >> >> efax: 41:08 waiting 2.0 s
> > >> >> >> efax: 41:09 .167 [ATQ0V1<CR><CR><LF>]
> > >> >> >> efax: 41:09 .227 [OK<CR><LF>]
> > >> >> >> efax: 41:09 response "OK"
> > >> >> >> efax: 41:09 command "E0"
> > >> >> >> efax: 41:09 waiting 5.0 s
> > >> >> >> efax: 41:09 .243 [ATE0<CR><CR><LF>]
> > >> >> >> efax: 41:09 .307 [OK<CR><LF>]
> > >> >> >> efax: 41:09 response "OK"
> > >> >> >> efax: 41:09 command "I3"
> > >> >> >> efax: 41:09 waiting 5.0 s
> > >> >> >> efax: 41:09 .355 [<CR><LF>537EP <CR><LF>]
> > >> >> >> efax: 41:09 .379 [<CR><LF>OK<CR><LF>]
> > >> >> >> efax: 41:09 response "OK"
> > >> >> >> efax: 41:09 command "+FCLASS=?"
> > >> >> >> efax: 41:09 waiting 5.0 s
> > >> >> >> efax: 41:09 .427 [<CR><LF>0,1,2,2.0,8<CR><LF>]
> > >> >> >> efax: 41:09 .443 [<CR><LF>OK<CR><LF>]
> > >> >> >> efax: 41:09 response "OK"
> > >> >> >> efax: 41:09 command "+FCLASS=2.0"
> > >> >> >> efax: 41:09 waiting 5.0 s
> > >> >> >> efax: 41:09 .515 [<CR><LF>OK<CR><LF>]
> > >> >> >> efax: 41:09 response "OK"
> > >> >> >> efax: 41:09 command "+FMI?"
> > >> >> >> efax: 41:09 waiting 5.0 s
> > >> >> >> efax: 41:09 .563 [<CR><LF>Intel Corporation<CR><LF>]
> > >> >> >> efax: 41:09 .587 [<CR><LF>OK<CR><LF>]
> > >> >> >> efax: 41:09 response "OK"
> > >> >> >> efax: 41:09 command "+FMM?"
> > >> >> >> efax: 41:09 waiting 5.0 s
> > >> >> >> efax: 41:09 .635 [<CR><LF>Intel(R) 537<CR><LF>]
> > >> >> >> efax: 41:09 .635 [<CR><LF>H.324 video-ready rev. 1.0<CR><LF>]
> > >> >> >> efax: 41:09 .659 [<CR><LF>OK<CR><LF>]
> > >> >> >> efax: 41:09 response "OK"
> > >> >> >> efax: 41:09 command "+FMR?"
> > >> >> >> efax: 41:09 waiting 5.0 s
> > >> >> >> efax: 41:09 .707 [<CR><LF>RSA REV 4.04 <CR><LF>]
> > >> >> >> efax: 41:09 .723 [<CR><LF>OK<CR><LF>]
> > >> >> >> efax: 41:09 response "OK"
> > >> >> >> efax: 41:09 using 537EP Intel Corporation Intel(R) 537 RSA REV
> > >> >> >> 4.04
> > >> >> >> in
> > >> >> >> class
> > >> >> >> 2.0
> > >> >> >> efax: 41:09 command "+FIP"
> > >> >> >> efax: 41:09 waiting 5.0 s
> > >> >> >> efax: 41:09 .787 [<CR><LF>ERROR<CR><LF>]
> > >> >> >> efax: 41:09 response "ERROR"
> > >> >> >> efax: 41:09 Warning: wrong response after command: +FIP
> > >> >> >> efax: 41:09 command "+FNR=1,1,1,0"
> > >> >> >> efax: 41:09 waiting 5.0 s
> > >> >> >> efax: 41:09 .859 [<CR><LF>OK<CR><LF>]
> > >> >> >> efax: 41:09 response "OK"
> > >> >> >> efax: 41:09 command "+FLO=1"
> > >> >> >> efax: 41:09 waiting 5.0 s
> > >> >> >> efax: 41:09 .923 [<CR><LF>OK<CR><LF>]
> > >> >> >> efax: 41:09 response "OK"
> > >> >> >> efax: 41:09 command "+FBO=0"
> > >> >> >> efax: 41:09 waiting 5.0 s
> > >> >> >> efax: 41:09 .995 [<CR><LF>OK<CR><LF>]
> > >> >> >> efax: 41:09 response "OK"
> > >> >> >> efax: 41:09 command "+FCR=1"
> > >> >> >> efax: 41:09 waiting 5.0 s
> > >> >> >> efax: 41:10 .067 [<CR><LF>OK<CR><LF>]
> > >> >> >> efax: 41:10 response "OK"
> > >> >> >> efax: 41:10 command "+FIS?"
> > >> >> >> efax: 41:10 waiting 5.0 s
> > >> >> >> efax: 41:10 .227 [<CR><LF>1,5,0,2,0,0,0,0<CR><LF>]
> > >> >> >> efax: 41:10 .243 [<CR><LF>OK<CR><LF>]
> > >> >> >> efax: 41:10 response "OK"
> > >> >> >> efax: 41:10 command "+FLI=" ""
> > >> >> >> efax: 41:10 waiting 5.0 s
> > >> >> >> efax: 41:10 .419 [<CR><LF>OK<CR><LF>]
> > >> >> >> efax: 41:10 response "OK"
> > >> >> >> efax: 41:10 command "A"
> > >> >> >> efax: 41:10 waiting 120.0 s
> > >> >> >> efax: 41:54 .307 [<CR><LF>OK<CR><LF>]
> > >> >> >> efax: 41:54 response "OK"
> > >> >> >> efax: 41:54 fax call answered
> > >> >> >> efax: 41:54 command "+FDR"
> > >> >> >> efax: 41:54 waiting 60.0 s
> > >> >> >> efax: 41:54 .467 [<CR><LF>ERROR<CR><LF>]
> > >> >> >> efax: 41:54 response "ERROR"
> > >> >> >> efax: 41:54 Error: receive (+FDR) command failed
> > >> >> >> efax: 41:54 command "+FKS"
> > >> >> >> efax: 41:54 waiting 5.0 s
> > >> >> >> efax: 41:54 .539 [<CR><LF>OK<CR><LF>]
> > >> >> >> efax: 41:54 response "OK"
> > >> >> >> efax: 41:54 command "Q0V1"
> > >> >> >> efax: 41:54 waiting 2.0 s
> > >> >> >> efax: 41:54 .619 [<CR><LF>OK<CR><LF>]
> > >> >> >> efax: 41:54 response "OK"
> > >> >> >> efax: 41:54 command "H"
> > >> >> >> efax: 41:54 waiting 5.0 s
> > >> >> >> efax: 41:55 .723 [<CR><LF>OK<CR><LF>]
> > >> >> >> efax: 41:55 response "OK"
> > >> >> >> efax: 41:55 done, returning 3 (invalid modem response)
> > >> >> >>
> > >> >> >>
> > >> >> >> The you wrote:
> > >> >> >> "Concerning grub.conf, check with the following:
> > >> >> >> $ sudo ls /boot
> > >> >> >> $ sudo ls /boot/grub
> > >> >> >> $ sudo /boot/grub/grub.conf
> > >> >> >> And you give the result of the commands."
> > >> >> >>
> > >> >> >>
> > >> >> >> This is what mine looks like...
> > >> >> >>
> > >> >> >> ryan@Ryan:~$ sudo ls /boot
> > >> >> >> abi-2.6.28-11-generic memtest86+.bin
> > >> >> >> config-2.6.28-11-generic System.map-2.6.28-11-generic
> > >> >> >> grub vmcoreinfo-2.6.28-11-generic
> > >> >> >> initrd.img-2.6.28-11-generic vmlinuz-2.6.28-11-generic
> > >> >> >> ryan@Ryan:~$ sudo ls /boot/grub
> > >> >> >> default fat_stage1_5 menu.lst stage1
> > >> >> >> device.map installed-version minix_stage1_5 stage2
> > >> >> >> e2fs_stage1_5 jfs_stage1_5 reiserfs_stage1_5 xfs_stage1_5
> > >> >> >> ryan@Ryan:~$ sudo /boot/grub/grub.conf
> > >> >> >> sudo: /boot/grub/grub.conf: command not found
> > >> >> >>
> > >> >> >>
> > >> >> >>
> > >> >> >> I copied the file to the specified directory and ran the commands
> > >> >> >> you
> > >> >> >> asked,
> > >> >> >> heres what came up:
> > >> >> >>
> > >> >> >> ryan@Ryan:~$ cd /home/ryan/intel-537EP_secure-2.60.80.0
> > >> >> >> ryan@Ryan:~/intel-537EP_secure-2.60.80.0$ make clean
> > >> >> >> cd coredrv; make clean
> > >> >> >> make[1]: Entering directory
> > >> >> >> `/home/ryan/intel-537EP_secure-2.60.80.0/coredrv'
> > >> >> >> rm -f *.ko *.o .*.o.cmd *.mod.c *~ core .*.ko.cmd Module.*
> > >> >> >> modules.*
> > >> >> >> rm -rf .tmp_versions
> > >> >> >> make[1]: Leaving directory
> > >> >> >> `/home/ryan/intel-537EP_secure-2.60.80.0/coredrv'
> > >> >> >> rm -f *.o *.ko
> > >> >> >> ryan@Ryan:~/intel-537EP_secure-2.60.80.0$ make 537
> > >> >> >> Module precompile check
> > >> >> >> Current running kernel is: 2.6.28-11-generic
> > >> >> >> /lib/modules... autoconf.h exists
> > >> >> >> diff: /boot/vmlinuz.autoconf.h: No such file or directory
> > >> >> >> autoconf.h matches running kernel
> > >> >> >> diff: /boot/vmlinuz.version.h: No such file or directory
> > >> >> >> version.h matches running kernel
> > >> >> >> /bin/sh: [[: not found
> > >> >> >> /bin/sh: [[: not found
> > >> >> >> /bin/sh: [[: not found
> > >> >> >> /bin/sh: [[: not found
> > >> >> >> /bin/sh: /lspci: not found
> > >> >> >> Modem type not determined.
> > >> >> >> $ export MODEM_TYPE=<type>
> > >> >> >> with type=537 or 537EP or 537SP or 537EA or 537AA
> > >> >> >> ryan@Ryan:~/intel-537EP_secure-2.60.80.0$ sudo set def
> > >> >> >> /home/ryan/intel-537EP_secure-2.60.80.0/
> > >> >> >> sudo: set: command not found
> > >> >> >> ryan@Ryan:~/intel-537EP_secure-2.60.80.0$ sudo make uninstall
> > >> >> >> Uninstalling on system V boot like only.
> > >> >> >> killall usrsound || echo
> > >> >> >> usrsound: no process killed
> > >> >> >>
> > >> >> >> killall hamregistry || echo
> > >> >> >> hamregistry: no process killed
> > >> >> >>
> > >> >> >> rm -f /etc/rc.d/init.d/537_boot
> > >> >> >> rm -f /etc/hamregistry.bin
> > >> >> >> rm -f /usr/sbin/usrsound
> > >> >> >> rm -f /usr/sbin/hamregistry
> > >> >> >> rmmod Intel537
> > >> >> >> ERROR: Module Intel537 does not exist in /proc/modules
> > >> >> >> make: *** [uninstall] Error 1
> > >> >> >> ryan@Ryan:~/intel-537EP_secure-2.60.80.0$ sudo make install
> > >> >> >> rm -f /usr/sbin/hamregistry.bin
> > >> >> >> bash 537_inst
> > >> >> >> running kernel 2.6.28-11-generic
> > >> >> >> installing hamregistry, used for persistant storage
> > >> >> >> installing usrsound, a soft buzzer
> > >> >> >> installing 537 module
> > >> >> >> install: cannot stat `Intel537.ko': No such file or directory
> > >> >> >> make: *** [install] Error 1
> > >> >> >> ryan@Ryan:~/intel-537EP_secure-2.60.80.0$
> > >> >> >>
> > >> >> >>
> > >> >> >>
> > >> >> >> You also asked for the output of "$ lspci -nn -vvv -Q". Here it
> > >> >> >> is:
> > >> >> >>
> > >> >> >> 00:00.0 Class [0600]: Device [8086:2570] (rev 02)
> > >> >> >> Subsystem: Device [1028:019d]
> > >> >> >> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> > >> >> >> ParErr-
> > >> >> >> Stepping- SERR+ FastB2B- DisINTx-
> > >> >> >> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> > >> >> >> <TAbort-
> > >> >> >> <MAbort+ >SERR- <PERR- INTx-
> > >> >> >> Latency: 0
> > >> >> >> Region 0: Memory at f8000000 (32-bit, prefetchable) [size=32M]
> > >> >> >> Capabilities: <access denied>
> > >> >> >> Kernel driver in use: agpgart-intel
> > >> >> >> Kernel modules: intel-agp
> > >> >> >>
> > >> >> >> 00:02.0 Class [0300]: Device [8086:2572] (rev 02)
> > >> >> >> Subsystem: Device [1028:019d]
> > >> >> >> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
> > >> >> >> ParErr-
> > >> >> >> Stepping- SERR- FastB2B- DisINTx-
> > >> >> >> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> > >> >> >> <TAbort-
> > >> >> >> <MAbort- >SERR- <PERR- INTx-
> > >> >> >> Interrupt: pin A routed to IRQ 11
> > >> >> >> Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
> > >> >> >> Region 1: Memory at feb80000 (32-bit, non-prefetchable)
> > >> >> >> [size=512K]
> > >> >> >> Region 2: I/O ports at ed98 [size=8]
> > >> >> >> Capabilities: <access denied>
> > >> >> >> Kernel modules: intelfb
> > >> >> >>
> > >> >> >> 00:1d.0 Class [0c03]: Device [8086:24d2] (rev 02)
> > >> >> >> Subsystem: Device [1028:019d]
> > >> >> >> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
> > >> >> >> ParErr-
> > >> >> >> Stepping- SERR- FastB2B- DisINTx-
> > >> >> >> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> > >> >> >> <TAbort-
> > >> >> >> <MAbort- >SERR- <PERR- INTx-
> > >> >> >> Latency: 0
> > >> >> >> Interrupt: pin A routed to IRQ 16
> > >> >> >> Region 4: I/O ports at ff80 [size=32]
> > >> >> >> Kernel driver in use: uhci_hcd
> > >> >> >>
> > >> >> >> 00:1d.1 Class [0c03]: Device [8086:24d4] (rev 02)
> > >> >> >> Subsystem: Device [1028:019d]
> > >> >> >> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
> > >> >> >> ParErr-
> > >> >> >> Stepping- SERR- FastB2B- DisINTx-
> > >> >> >> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> > >> >> >> <TAbort-
> > >> >> >> <MAbort- >SERR- <PERR- INTx-
> > >> >> >> Latency: 0
> > >> >> >> Interrupt: pin B routed to IRQ 19
> > >> >> >> Region 4: I/O ports at ff60 [size=32]
> > >> >> >> Kernel driver in use: uhci_hcd
> > >> >> >>
> > >> >> >> 00:1d.3 Class [0c03]: Device [8086:24de] (rev 02)
> > >> >> >> Subsystem: Device [1028:019d]
> > >> >> >> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
> > >> >> >> ParErr-
> > >> >> >> Stepping- SERR- FastB2B- DisINTx-
> > >> >> >> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> > >> >> >> <TAbort-
> > >> >> >> <MAbort- >SERR- <PERR- INTx-
> > >> >> >> Latency: 0
> > >> >> >> Interrupt: pin A routed to IRQ 16
> > >> >> >> Region 4: I/O ports at ff20 [size=32]
> > >> >> >> Kernel driver in use: uhci_hcd
> > >> >> >>
> > >> >> >> 00:1d.7 Class [0c03]: Device [8086:24dd] (rev 02) (prog-if 20)
> > >> >> >> Subsystem: Device [1028:019d]
> > >> >> >> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> > >> >> >> ParErr-
> > >> >> >> Stepping- SERR+ FastB2B- DisINTx-
> > >> >> >> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> > >> >> >> <TAbort-
> > >> >> >> <MAbort- >SERR- <PERR- INTx-
> > >> >> >> Latency: 0
> > >> >> >> Interrupt: pin D routed to IRQ 23
> > >> >> >> Region 0: Memory at ffa80800 (32-bit, non-prefetchable)
> > >> >> >> [size=1K]
> > >> >> >> Capabilities: <access denied>
> > >> >> >> Kernel driver in use: ehci_hcd
> > >> >> >>
> > >> >> >> 00:1e.0 Class [0604]: Device [8086:244e] (rev c2)
> > >> >> >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> > >> >> >> ParErr-
> > >> >> >> Stepping- SERR+ FastB2B- DisINTx-
> > >> >> >> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> > >> >> >> <TAbort-
> > >> >> >> <MAbort- >SERR- <PERR- INTx-
> > >> >> >> Latency: 0
> > >> >> >> Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
> > >> >> >> I/O behind bridge: 0000d000-0000dfff
> > >> >> >> Memory behind bridge: fea00000-feafffff
> > >> >> >> Prefetchable memory behind bridge: fff00000-000fffff
> > >> >> >> Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> > >> >> >> <TAbort-
> > >> >> >> <MAbort- <SERR- <PERR-
> > >> >> >> BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
> > >> >> >> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> > >> >> >> Kernel modules: shpchp
> > >> >> >>
> > >> >> >> 00:1f.0 Class [0601]: Device [8086:24d0] (rev 02)
> > >> >> >> Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
> > >> >> >> ParErr-
> > >> >> >> Stepping- SERR+ FastB2B- DisINTx-
> > >> >> >> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> > >> >> >> <TAbort-
> > >> >> >> <MAbort- >SERR- <PERR- INTx-
> > >> >> >> Latency: 0
> > >> >> >> Kernel modules: iTCO_wdt, intel-rng
> > >> >> >>
> > >> >> >> 00:1f.1 Class [0101]: Device [8086:24db] (rev 02) (prog-if 8a
> > >> >> >> [Master
> > >> >> >> SecP
> > >> >> >> PriP])
> > >> >> >> Subsystem: Device [1028:019d]
> > >> >> >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> > >> >> >> ParErr-
> > >> >> >> Stepping- SERR- FastB2B- DisINTx-
> > >> >> >> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> > >> >> >> <TAbort-
> > >> >> >> <MAbort- >SERR- <PERR- INTx-
> > >> >> >> Latency: 0
> > >> >> >> Interrupt: pin A routed to IRQ 18
> > >> >> >> Region 0: I/O ports at 01f0 [size=8]
> > >> >> >> Region 1: I/O ports at 03f4 [size=1]
> > >> >> >> Region 2: I/O ports at 0170 [size=8]
> > >> >> >> Region 3: I/O ports at 0374 [size=1]
> > >> >> >> Region 4: I/O ports at ffa0 [size=16]
> > >> >> >> Region 5: Memory at feb7fc00 (32-bit, non-prefetchable)
> > >> >> >> [size=1K]
> > >> >> >> Kernel driver in use: ata_piix
> > >> >> >>
> > >> >> >> 00:1f.3 Class [0c05]: Device [8086:24d3] (rev 02)
> > >> >> >> Subsystem: Device [1028:019d]
> > >> >> >> Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
> > >> >> >> ParErr-
> > >> >> >> Stepping- SERR- FastB2B- DisINTx-
> > >> >> >> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> > >> >> >> <TAbort-
> > >> >> >> <MAbort- >SERR- <PERR- INTx-
> > >> >> >> Interrupt: pin B routed to IRQ 3
> > >> >> >> Region 4: I/O ports at eda0 [size=32]
> > >> >> >> Kernel modules: i2c-i801
> > >> >> >>
> > >> >> >> 00:1f.5 Class [0401]: Device [8086:24d5] (rev 02)
> > >> >> >> Subsystem: Device [1028:019d]
> > >> >> >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> > >> >> >> ParErr-
> > >> >> >> Stepping- SERR- FastB2B- DisINTx-
> > >> >> >> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> > >> >> >> <TAbort-
> > >> >> >> <MAbort- >SERR- <PERR- INTx-
> > >> >> >> Latency: 0
> > >> >> >> Interrupt: pin B routed to IRQ 17
> > >> >> >> Region 0: I/O ports at ee00 [size=256]
> > >> >> >> Region 1: I/O ports at edc0 [size=64]
> > >> >> >> Region 2: Memory at feb7fa00 (32-bit, non-prefetchable)
> > >> >> >> [size=512]
> > >> >> >> Region 3: Memory at feb7f900 (32-bit, non-prefetchable)
> > >> >> >> [size=256]
> > >> >> >> Capabilities: <access denied>
> > >> >> >> Kernel driver in use: Intel ICH
> > >> >> >> Kernel modules: snd-intel8x0
> > >> >> >>
> > >> >> >> 01:01.0 Class [0703]: Device [8086:1080] (rev 04)
> > >> >> >> Subsystem: Device [1028:1000]
> > >> >> >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
> > >> >> >> ParErr-
> > >> >> >> Stepping+ SERR+ FastB2B- DisINTx-
> > >> >> >> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> > >> >> >> <TAbort-
> > >> >> >> <MAbort- >SERR- <PERR- INTx-
> > >> >> >> Latency: 64 (250ns min, 15500ns max), Cache Line Size: 64 bytes
> > >> >> >> Interrupt: pin A routed to IRQ 22
> > >> >> >> Region 0: Memory at feafe000 (32-bit, non-prefetchable)
> > >> >> >> [size=4K]
> > >> >> >> Region 1: I/O ports at de00 [size=256]
> > >> >> >> Capabilities: <access denied>
> > >> >> >> Kernel driver in use: serial
> > >> >> >>
> > >> >> >> 01:08.0 Class [0200]: Device [8086:1050] (rev 02)
> > >> >> >> Subsystem: Device [1028:019d]
> > >> >> >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
> > >> >> >> ParErr-
> > >> >> >> Stepping- SERR+ FastB2B- DisINTx-
> > >> >> >> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> > >> >> >> <TAbort-
> > >> >> >> <MAbort- >SERR- <PERR- INTx-
> > >> >> >> Latency: 64 (2000ns min, 14000ns max), Cache Line Size: 64 bytes
> > >> >> >> Interrupt: pin A routed to IRQ 20
> > >> >> >> Region 0: Memory at feaff000 (32-bit, non-prefetchable)
> > >> >> >> [size=4K]
> > >> >> >> Region 1: I/O ports at ddc0 [size=64]
> > >> >> >> Capabilities: <access denied>
> > >> >> >> Kernel driver in use: e100
> > >> >> >> Kernel modules: e100, eepro100
> > >> >> >>
> > >> >> >>
> > >> >> >> Can you help me any further?
> > >> >> >> Maybe I have made a mistake somewhere along the lines.
> > >> >> >> Can you explain to me specifically where you want me to go from
> > >> >> >> here?
> > >> >> >>
> > >> >> >> Ryan
> > >> >> >>
> > >> >> >>
> > >> >> >
> > >> >> >
> > >> >>
> > >> >>
> > >> >
> > >> >
> > >>
> > >>
> > >
> > >
> >
> >
>
>
