Hi,
I am unable to install my PCMCIA Modem in Linux.
Laptop Make & Model:
DELL Latitude D400
Intel Centrino 1.60 Ghz
Memory: 512 MB
Distribution: Ubuntu 9.04 (jaunty)
Kernel: Linux 2.6.28-11-generic
Environment: GNOME 2.26.1 Build Date Wednesday 06 May 2009
Manufacturer: ZTE Corporation
800MHz CDMA 1X
Model: MC315+
PCMCIA TYPE-II
Wireless Modem
***************ModemData.txt***************
-------------------------- System information
----------------------------
CPU=i686,
Linux version 2.6.28-13-generic (buildd@palmer) (gcc version 4.3.3
(Ubuntu 4.3.3-5ubuntu4) ) #44-Ubuntu SMP Tue Jun 2 07:57:31 UTC 2009
scanModem update of: 2009_05_31
The modem symbolic link is /dev/modem -> /dev/ttyS0
There are no blacklisted modem drivers in /etc/modprobe* files
Potentially useful modem drivers now loaded are:
Attached USB devices are:
ID 413c:8000 Dell Computer Corp. BC02 Bluetooth USB Adapter
If a cellphone is not detected, see
http://ubuntuforums.org/archive/index.php/t-878554.html
If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@xxxxxxxxxxxxx
For candidate card in slot 00:1f.6, firmware information and bootup
diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:1f.6 8086:24c6 14f1:5422 Modem: Intel Corporation 82801DB/DBL/DBM
Modem interrupt assignment and sharing:
5: 3015840 XT-PIC-XT ipw2200, Intel 82801DB-ICH4
--- Bootup diagnostics for card in PCI slot 00:1f.6 ----
[ 0.579752] pci 0000:00:1f.6: reg 10 io port: [0xd400-0xd4ff]
[ 0.579758] pci 0000:00:1f.6: reg 14 io port: [0xd080-0xd0ff]
[ 0.580027] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[ 0.580031] pci 0000:00:1f.6: PME# disabled
[ 2.109390] serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 5
(level, low) -> IRQ 5
[ 2.109398] serial 0000:00:1f.6: PCI INT B disabled
The PCI slot 00:1f.6 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible
fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
The ALSA packages provide audio support and also drivers for some
modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.
The ALSA verion is 1.0.18
The modem cards detected by "aplay -l" are: None
The /proc/asound/pcm file reports:
-----------------------
00-00: Intel ICH : Intel 82801DB-ICH4 : playback 1 : capture 1
00-01: Intel ICH - MIC ADC : Intel 82801DB-ICH4 - MIC ADC : capture 1
00-02: Intel ICH - MIC2 ADC : Intel 82801DB-ICH4 - MIC2 ADC : capture 1
00-03: Intel ICH - ADC2 : Intel 82801DB-ICH4 - ADC2 : capture 1
00-04: Intel ICH - IEC958 : Intel 82801DB-ICH4 - IEC958 : playback 1
about /proc/asound/cards:
------------------------
0 [I82801DBICH4 ]: ICH4 - Intel 82801DB-ICH4
Intel 82801DB-ICH4 with STAC9750,51 at irq 5
=== Finished firmware and bootup diagnostics, next deducing cogent
software. ===
Predictive diagnostics for card in bus 00:1f.6:
Modem chipset detected on
NAME="Modem: Intel Corporation 82801DB/DBL/DBM "
CLASS=0703
PCIDEV=8086:24c6
SUBSYS=14f1:5422
IRQ=5
SOFT=8086:24c6.MC97
CodecArchived=CXT
CodecClass=CXT
IDENT=hsfmodem
Driver=hsfmodem-drivers
For candidate modem in: 00:1f.6
0703 Modem: Intel Corporation 82801DB/DBL/DBM
Primary device ID: 8086:24c6
Subsystem PCI_id 14f1:5422
Softmodem codec or chipset from diagnostics:
from Archives: CXT, a Conexant type
using hsfmodem software.
CXTnn is a generic for all CXTnumbers, with Linuxant hsfmodem
software support.
Support type needed or chipset: hsfmodem
Writing DOCs/Intel.txt
For owners of a Dell PCs with Conexant HSF modems, a driver source
package with full speed enabled is available, but requires driver
compiling. Read DOCs/Conexant.txt
Start at http://www.linuxant.com/drivers/hsf/downloads-license.php to
find the
hsfmodem package matching your System. For several Linux distros, there
are
precompiled drivers matched to specific kernels. These have within the
FileName,
your KernelVersion: 2.6.28_13_generic
They can be found through
http://www.linuxant.com/drivers/hsf/full/downloads.php
A more precise location may be given a few paragraphs below.
If an EXACT Match with your your KernelVersion is not found, one of the
"Generic packages with source" near the bottom of the page must be used.
Downloaded packages must be moved into the Linux partition (home folder
is OK)
and unzipped with:
unzip hsf*.zip
The installation command for a .deb suffic packages is, with root/adm
permission:
sudo dpkg -i hsf*.deb
while for .rpm suffix it is, with:
rpm -i hsf*.rpm
From http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php
download
hsfmodem-7.80.02.02full_k2.6.28_13_generic_ubuntu_i386.deb.zip
Under Linux unpack with:
$ unzip hsfmodem*.zip
Then install with:
$ sudo dpkg -i hsfmodem*.deb
Subsequently, the modem should be found with
$ sudo wvdialconf /etc/wvdial.conf
Edit in your personal information with:
$ sudo gedit /etc/wvdial.conf
and try dialing out with:
$ sudo wvdial.
See DOCs/Testing.txt for details.
Read DOCs/Conexant.txt
Writing DOCs/Conexant.txt
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.3.3
and the compiler used in kernel assembly: 4.3.3
Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.3
linuc_headers base folder /lib/modules/2.6.28-13-generic/build
However some compilations and executable functions may need additional
files,
in the FileNames.h (so called kernel "h"eaders) collection installed
in /usr/include/ .
For martian_modem, additional required packages are needed. The also
required headers of package libc6 are commonly installed by default.
Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev
packages, for kernels 2.6.24 and later versions.
In not included on your install CD, search for them at
http://packages.ubuntu.com
or comparable Repository for other Linux distros.
When compiling ALSA drivers, the utility "patch" will also be needed.
If a driver compilation fails, with message including some lack of some
FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include.
The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to
display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 eth1
Which can interfere with Browser naviagation.
Don't worry about the following, it is for experts should trouble
shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link: lrwxrwxrwx 1 root root 10 2009-06-25
17:05 /dev/modem -> /dev/ttyS0
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
/etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order
to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
