Re: Shivku, India kernel 2.6.28-11-generic - Need Help - Segmentation fault on driver testing

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Shiva,

The dkms-agrsm_2.1.80-6_i386.deb listed in the scanModem output doesn't have
support for the 2.6.28 kernel. As an alternative to downgrading the kernel, you
may try dkms-agrsm_2.1.80-7_i386.deb. The support for 11c11040 there is in need
of testing.

-- 
WBR, Nikolay Zhuravlev

Thus spake Shiva Kumar (shivku@xxxxxxxxx):

> Hello all,
> Based on ModemData.txt, I went ahead and followed the instructions
> only to be stuck with a segmentation fault with sudo agrsm-test and
> sudo wvdialconf /etc/wvdial.conf
> 
> Please find attached modemData.txt and agrsm-test.txt
> 
> I browsed through the archives, but didnt really find any reply to this problem.
> 
> Any help would be appreciated & Thanks in advance.
> 
> 
> ModemData.txt:
> --------------------------  System information ----------------------------
> CPU=i686,
> Linux version 2.6.28-11-generic (buildd@palmer) (gcc version 4.3.3
> (Ubuntu 4.3.3-5ubuntu4) ) #42-Ubuntu SMP Fri Apr 17 01:57:59 UTC 2009
>  scanModem update of:  2009_05_31
> 
>  There are no blacklisted modem drivers in /etc/modprobe*  files
>  Potentially useful modem drivers now loaded are:
>          snd_hda_intel
> 
> Attached USB devices are:
>  ID 046d:c03d Logitech, Inc. M-BT69a Pilot Optical Mouse
>  ID 04f2:b083 Chicony Electronics Co., Ltd
>  ID 03f0:171d Hewlett-Packard Wireless (Bluetooth + WLAN) Interface
> [Integrated Module]
> If a cellphone is not detected, see
> http://ubuntuforums.org/archive/index.php/t-878554.html
> 
> If a USB modem or cellphone is attached and was not detected, please
> provide available information in your request to discuss@xxxxxxxxxxxxx
> 
> For candidate card in slot 00:1b.0, firmware information and bootup
> diagnostics are:
>  PCI slot    PCI ID        SubsystemID    Name
>  ----------    ---------    ---------    --------------
>  00:1b.0    8086:293e    103c:30e8    Audio device: Intel Corporation 82801I
> 
>  Modem interrupt assignment and sharing:
> 2296:       4489       4473   PCI-MSI-edge      HDA Intel
>  --- Bootup diagnostics for card in PCI slot 00:1b.0 ----
> [    0.576735] pci 0000:00:1b.0: reg 10 64bit mmio: [0x98900000-0x98903fff]
> [    0.576777] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
> [    0.576782] pci 0000:00:1b.0: PME# disabled
> [   15.946017] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
> [   15.946028] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 17 (level,
> low) -> IRQ 17
> [   15.946157] HDA Intel 0000:00:1b.0: irq 2296 for MSI/MSI-X
> [   15.946198] HDA Intel 0000:00:1b.0: setting latency timer to 64
> 
>  The PCI slot 00:1b.0 of the modem card may be disabled early in
>  a bootup process,  but then enabled later. If modem drivers load
>  but the  modem is not responsive, read DOCs/Bootup.txt about possible fixes.
>  Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
>  if help is needed.
> 
> 
> 
> ===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
> The ALSA packages provide audio support and also drivers for some modems.
> ALSA diagnostics are written during bootup to /proc/asound/ folders.
> 
> The ALSA verion is 1.0.18
> The modem cards detected by "aplay -l"  are: None
> 
> 
> The /proc/asound/pcm file reports:
> -----------------------
> 00-00: AD198x Analog : AD198x Analog : playback 1 : capture 2
> 
> about /proc/asound/cards:
> ------------------------
>  0 [Intel          ]: HDA-Intel - HDA Intel
>                       HDA Intel at 0x98900000 irq 2296
> 
>  PCI slot 00:1b.0 has a High Definition Audio Card
>  The drivers are in the kernel modules tree at:
>  /lib/modules/2.6.28-11-generic/kernel/sound/pci/hda/snd-hda-intel.ko
>  The modem codec file for the HDA card is: /proc/asound/card0/codec#1
> --------------------------------------------------------
> Codec: LSI ID 1040
> Address: 1
> Vendor Id: 0x11c11040
> Subsystem Id: 0x103c1378
> Revision Id: 0x100200
> Modem Function Group: 0x1
> 
>  The audio card hosts a softmodem chip:  0x11c11040
> If not a Conexant modem, the driver agrsm with its dependent drivers:
> 
> ----------
> provide audio + modem support with the modem chip residing on the subsystem.
> Any particular card can host any one of several soft modem chips.
> 
> === Finished firmware and bootup diagnostics, next deducing cogent software. ===
> 
> Predictive  diagnostics for card in bus 00:1b.0:
>     Modem chipset  detected on
> NAME="Audio device: Intel Corporation 82801I "
> CLASS=0403
> PCIDEV=8086:293e
> SUBSYS=103c:30e8
> IRQ=2296
> HDA=8086:293e
> SOFT=8086:293e.HDA
> HDAchipVendorID=11c1
> CHIP=0x11c11040
> IDENT=agrsm
> Driver=agrsm
> 
>  For candidate modem in:  00:1b.0
>    0403 Audio device: Intel Corporation 82801I
>       Primary device ID:  8086:293e
>     Subsystem PCI_id  103c:30e8
>     Softmodem codec or chipset from diagnostics: 0x11c11040
>                                from    Archives:
>                         The HDA card softmodem chip is 0x11c11040
> 
> 
> Support type needed or chipset:    agrsm
> 
> 
> Writing DOCs/Intel.txt
> 
> The AgereSystems/LSI agrsm code supports compiling of a agrmodem +
> agrsm driver pair.
> One resource site is http://linmodems.technion.ac.il/packages/ltmodem/11c11040/
> Thereat get the agrsm_howto.txt and one of the agrsm-tools packages.
> The initial agrsm_howto.txt compiling steps are only cogent to modems
> with PCI IDs:
>    11c1:0620, 11c1:048c and 11c1:048f chips.
>    They use the agrsm-20090418.tar.gz package.
> The agrsm-tools sets a useful symbolic link and a agrsm-test utlity
> 
> For AgereSystems/LSI with Vendor 11c1 chips hosted on High Definition
> Audio cards, there may be support
> through the agrsm resources (providing an agrmodem + agrserial driver
> pair) as an alternative to usage
> of the snd-hda-intel driver + slmodemd helper. For the 11c11040 modem
> chip, ONLY the agrsm code is competent.
> Your Linux distro's dkms package should be first installed, as it
> directs the installation of modem
> specific dkms-agrsm resources, and also directs auto-installation of
> new drivers upon kernel upgrades.
> 
> Currently, the dkms-agrsm code is NOT competent for 2.26.28 and later kernels.
> A short term fix is to install linux-image + linux-headers packages
> for earlier kernels.
> For example, for Ubuntu Jaunty with 2.6.28 kernels, linux-image +
> linux-headers packages
> for earlier 2.26.27 series Intrepid kernels can be installed. Search
> for them at:
>    http://packages.ubuntu.com
> 
> 
> The primary dkms-agrsm resource site is
> http://linux.zsolttech.com/linmodem/agrsm/
> whereat a few different packaging types are available. Debian type
> installers (supporting Ubuntu too)
> are copied to http://linmodems.technion.ac.il/packages/ltmodem/11c11040/
> . Thereat the current package
> is the dkms-agrsm_2.1.80-6_i386.deb is for Agere/LSI chipsets hosted
> on High Definition Audio cards.
> Read the Modem/DOCs/Agrsm.txt for details.
> 
> -------------- end Agere Systems section -------------------
> 
>  Completed candidate modem analyses.
> 
>  The base of the UDEV device file system is: /dev/.udev
> 
>  Versions adequately match for the compiler installed: 4.3.3
>              and the compiler used in kernel assembly: 4.3.3
> 
> 
> 
>  Minimal compiling resources appear complete:
>    make utility - /usr/bin/make
>    Compiler version 4.3
>    linuc_headers base folder /lib/modules/2.6.28-11-generic/build
> 
>  However some compilations and executable functions may need additional files,
>  in the FileNames.h (so called kernel "h"eaders) collection installed
> in  /usr/include/ .
>  For martian_modem, additional required packages are needed. The also
> required headers of package libc6 are commonly installed by default.
>  Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev
> packages, for kernels 2.6.24 and later versions.
>  In not included on your install CD, search for them at
> http://packages.ubuntu.com
>  or comparable Repository for other Linux distros.
>  When compiling ALSA drivers, the utility "patch" will also be needed.
> 
> 
> Compressed files at: /usr/src/vpb-driver.tar.bz2
> 
> 
> If a driver compilation fails, with message including some lack of
> some FileName.h (stdio.h for example), then
> Some additional kernel-header files need installation to /usr/include.
> The minimal additional packages are libc6-dev
> and any of its dependents, under Ubuntu linux-libc-dev
> 
> If an alternate ethernet connection is available,
> $  apt-get update
> $  apt-get -s install linux-kernel-devel
> will install needed packages.
> For Debian/Ubuntu related distributions, run the following command to
> display the needed package list:
> 
> Otherwise packages have to be found through http://packages.ubuntu.com
> Once downloaded and transferred into a Linux partition,
> they can be installed alltogether with:
> $ sudo dpkg -i *.deb
> 
> 
> Checking pppd properties:
>     -rwsr-xr-x 1 root dip 277352 2009-02-20 22:55 /usr/sbin/pppd
> 
> In case of an "error 17" "serial loopback" problem, see:
>     http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
> 
> To enable dialout without Root permission do:
>     $ su - root  (not for Ubuntu)
>         sudo chmod a+x /usr/sbin/pppd
> or under Ubuntu related Linuxes
>     sudo chmod a+x /usr/sbin/pppd
> 
> Checking settings of:    /etc/ppp/options
> asyncmap 0
> noauth
> crtscts
> lock
> hide-password
> modem
> proxyarp
> lcp-echo-interval 30
> lcp-echo-failure 4
> noipx
> 
> In case of a message like:
>    Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
> see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
> 
> Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
> wlan0 wmaster0
> Which can interfere with Browser naviagation.
> 
>  Don't worry about the following, it is for experts should trouble
> shooting be necessary.
> ==========================================================
> 
>  Checking for modem support lines:
>  --------------------------------------
>      /device/modem symbolic link:
> slmodemd created symbolic link /dev/ttySL0:
>      Within /etc/udev/ files:
> 
>      Within /etc/modprobe.conf files:
> /etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
> /etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
> /etc/modprobe.d/agrsm.conf:## setup agrsm modem with only: "sudo
> modprobe agrserial"
> /etc/modprobe.d/agrsm.conf:install agrserial /sbin/modprobe
> --ignore-install agrmodem ; /sbin/modprobe --ignore-install agrserial
> && \
> /etc/modprobe.d/agrsm.conf:remove agrserial /sbin/modprobe -r
> --ignore-remove agrserial ; /sbin/modprobe -r --ignore-remove agrmodem
> && { if test -L /dev/ttySAGR; then rm /dev/ttySAGR; fi } ; true
> /etc/modprobe.d/agrsm.conf:# to automate bootup  "sudo modprobe agrmodem"
> /etc/modprobe.d/agrsm.conf:## to setup agrsm modem with only: "sudo
> modprobe agrmodem"
> /etc/modprobe.d/agrsm.conf:# install agrmodem /sbin/modprobe
> --ignore-install agrmodem && \
> /etc/modprobe.d/agrsm.conf:## of effects of agrmodem and agrserial loading
> /etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in
> order to blacklist unwanted modem drivers
> /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
> /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
>      Within any ancient /etc/devfs files:
> 
>      Within ancient kernel 2.4.n /etc/module.conf files:
> 
> --------- end modem support lines --------
> 
> --------------------------------------------------agrsm-test.txt-----------------------------------------------------------
> 
> 
> Loading drivers:
> 
> Drivers loaded:
> agrserial              19808  0
> agrmodem             1258372  1
> snd                    62628  17
> agrmodem,snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
> 
> and symbolic link created:
> lrwxrwxrwx 1 root root 12 2009-06-05 21:24 /dev/ttySAGR -> /dev/ttyAGS3
> 
> Checking for utility wvdialconf
> Found /usr/bin/wvdialconf, preparing to run:
>         wvdialconf /etc/wvdial.conf
> 
> Modem Port Scan<*1>: S0   S1   S2   S3   Segmentation fault
> 
> A reboot may be necessary before modem detection through:
>         sudo modprobe agrserial
> Which will load agrmodem, agrserial and create the symbolic link needed for:
>         sudo wvdialconf
> 
> 
> The installation record has been written to ./agrsm-test.txt
> 
> 
> 
> --
> Shivku,
> http://blog.shivku.com

[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux