Hello,
I recently added myself to the linmodems mailing list because I have a
modem I couldnt configure by any tutorial on the web.
I have a Toshiba a200 portable pc.
And it has a intel sound card that also worked as modem. This is the
lspci command output:
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory
Controller Hub (rev 0c)
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960
Integrated Graphics Controller (rev 0c)
00:02.1 Display controller: Intel Corporation Mobile GM965/GL960
Integrated Graphics Controller (rev 0c)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI
Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio
Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express
Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express
Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express
Port 3 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express
Port 4 (rev 03)
00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express
Port 5 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI
Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface
Controller (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E)
IDE Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E)
SATA AHCI Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller
(rev 03)
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 01)
05:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG
[Golan] Network Connection (rev 02)
0c:04.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
0c:04.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant
IEEE 1394 Host Controller
0c:04.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia
Card Reader (SD/MMC/MS/MS PRO/xD)
0c:04.3 SD Host controller: Texas Instruments PCIxx12 SDA Standard
Compliant SD Host Controller
And the aplay -l:
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC268 Analog [ALC268 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
Any other information is needed just mail and i will reply as soon as i
can.
ModemData.txt says:
Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List
Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 2.6.26-1-686-bigmem
With this Subject Line cogent experts will be alerted, and useful case
names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in
YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for
dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an
Internet Provider mail filters.
So in a day, also check the Archived responses at
http://www.linmodems.org
-------------------------- System information
----------------------------
CPU=i686,
Linux version 2.6.26-1-686-bigmem (Debian 2.6.26-13lenny2)
(dannf@xxxxxxxxxx) (gcc version 4.1.3 20080704 (prerelease) (Debian
4.1.2-25)) #1 SMP Fri Mar 13 18:52:29 UTC 2009
scanModem update of: 2009_05_12
There are no blacklisted modem drivers in /etc/modprobe* files
Potentially useful modem drivers now loaded are:
snd_hda_intel
Attached USB devices are:
ID 04f3:0210 Elan Microelectronics Corp. AM-400 Hama Optical Mouse
ID 04f2:b008 Chicony Electronics Co., Ltd
ID 0930:0508 Toshiba Corp. Integrated Bluetooth HCI
If a cellphone is not detected, see
http://ubuntuforums.org/archive/index.php/t-878554.html
If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@xxxxxxxxxxxxx
For candidate card in slot 00:1b.0, firmware information and bootup
diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:1b.0 8086:284b 1179:ff00 Audio device: Intel Corporation
82801H
Modem interrupt assignment and sharing:
22: 153438 145705 IO-APIC-fasteoi HDA Intel
--- Bootup diagnostics for card in PCI slot 00:1b.0 ----
[ 10.255151] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level,
low) -> IRQ 22
[ 10.255151] PCI: Setting latency timer of device 0000:00:1b.0 to 64
===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
The ALSA packages provide audio support and also drivers for some
modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.
The ALSA verion is 1.0.16
The modem cards detected by "aplay -l" are: None
The /proc/asound/pcm file reports:
-----------------------
00-04: ALC268 Analog : ALC268 Analog : capture 1
00-00: ALC268 Analog : ALC268 Analog : playback 1 : capture 1
about /proc/asound/cards:
------------------------
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xfc500000 irq 22
PCI slot 00:1b.0 has a High Definition Audio Card
The drivers are in the kernel modules tree at:
/lib/modules/2.6.26-1-686-bigmem/kernel/sound/pci/hda/snd-hda-intel.ko
/lib/modules/2.6.26-1-686/kernel/sound/pci/hda/snd-hda-intel.ko
The modem codec file for the HDA card is: /proc/asound/card0/codec#1
--------------------------------------------------------
Codec: LSI ID 1040
Address: 1
Vendor Id: 0x11c11040
Subsystem Id: 0x11790001
Revision Id: 0x100200
Modem Function Group: 0x1
The audio card hosts a softmodem chip: 0x11c11040
If not a Conexant modem, the driver agrsm with its dependent drivers:
----------
provide audio + modem support with the modem chip residing on the
subsystem.
Any particular card can host any one of several soft modem chips.
=== Finished firmware and bootup diagnostics, next deducing cogent
software. ===
Predictive diagnostics for card in bus 00:1b.0:
Modem chipset detected on
NAME="Audio device: Intel Corporation 82801H "
CLASS=0403
PCIDEV=8086:284b
SUBSYS=1179:ff00
IRQ=22
HDA=8086:284b
SOFT=8086:284b.HDA
CHIP=0x11c11040
IDENT=agrsm
Driver=agrsm
For candidate modem in: 00:1b.0
0403 Audio device: Intel Corporation 82801H
Primary device ID: 8086:284b
Subsystem PCI_id 1179:ff00
Softmodem codec or chipset from diagnostics: 0x11c11040
from Archives:
The HDA card softmodem chip is 0x11c11040
Support type needed or chipset: agrsm
Writing DOCs/Intel.txt
The AgereSystems/LSI agrsm code supports compiling of a agrmodem + agrsm
driver pair.
One resource site is
http://linmodems.technion.ac.il/packages/ltmodem/11c11040/
Thereat get the agrsm-howto.txt, through the compiling steps are only
cogent to modems
with 11c1:0260, 11c1:048c and 11c1:048f chips. They use the
agrsm-20090418.tar.gz package.
If your Distro uses Debian packages, also get the agrsm-tools.deb
package.
For AgereSystems/LSI 11c11040 chip hosted on High Definition Audio
cards, your Linux
Distro's dkms package should be first installed, as it directs the
installation of modem
specific dkms-agrsm resources. For an example of what to expect, read
http://linmodems.technion.ac.il/bigarch/archive-eighth/msg03863.html
The primary dkms-agrsm resource site is
http://linux.zsolttech.com/linmodem/agrsm/
whereat a few differnt packaging types are available. For your
convenience
dkms-agrsm-CurrentVersion.deb are also available at to
http://linmodems.technion.ac.il/packages/ltmodem/11c11040/
The .deb packages can be manually installed by:
$ dpkg -i dkms*.deb agrsm*.deb
which will sequentially process dkms, dkms-agrsm and the agrsm-tools
packages.
Read the DOCs/Agrsm.txt for details.
-------------- end Agere Systems section -------------------
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.1.3
and the compiler used in kernel assembly: 4.1.3
Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.1
linuc_headers base folder /lib/modules/2.6.26-1-686-bigmem/build
However some compilations and executable functions may need additional
files,
in the FileNames.h (so called kernel "h"eaders) collection installed
in /usr/include/ .
For martian_modem, additional required packages are needed. The also
required headers of package libc6 are commonly installed by default.
Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev
packages, for kernels 2.6.24 and later versions.
In not included on your install CD, search for them at
http://packages.ubuntu.com
or comparable Repository for other Linux distros.
When compiling ALSA drivers, the utility "patch" will also be needed.
Compressed files at: /usr/src/linux-source-2.6.26.tar.bz2
For Debian and some related distributions, a package
kernel-kbuild-2.6-26 may be needed to support driver compiling.
If a driver compilation fails, with message including some lack of some
FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include.
The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to
display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking settings of: /etc/ppp/options
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
wlan0 wmaster0
Which can interfere with Browser naviagation.
Don't worry about the following, it is for experts should trouble
shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
/etc/udev/rules.d/80-drivers.rules:SUBSYSTEM=="atm", RUN
+="dsl-modem.agent"
Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base-blacklist:# Uncomment these entries in order
to blacklist unwanted modem drivers
/etc/modprobe.d/alsa-base-blacklist:# blacklist snd-atiixp-modem
/etc/modprobe.d/alsa-base-blacklist:# blacklist snd-via82xx-modem
/etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
For Debian users, the linux-headers-2.6.26-1-686-bigmem.deb can be used
instead of kernel-source/
