A candidate modem is not evident among the PCI devices:
However from your diagnostics
ATQ0V1E0 - OK
AT+GMM - Dynamode Smart Express V92 Modem
Ver2.85.02G
AT+FCLASS=? - 0,1
AT#CLS=? - ֺ־ְְִּֽ ֵֽ ֿ־ִִֵ׀ְֲֵֶָׁׂ
AT+GCI? - ֺ־ְְִּֽ ֵֽ ֿ־ִִֵ׀ְֲֵֶָׁׂ
AT+GCI=? - ֺ־ְְִּֽ ֵֽ ֿ־ִִֵ׀ְֲֵֶָׁׂ
ATI1 - Dynamode Smart Express V92 Modem
Dynamode Smart Express V92 Modem
Ver2.85.02G
ATI2 - Dynamode Smart Express V92 Modem
Ver2.85.02G
MO
ATI3 - Dynamode Smart Express V92 Modem
SIL-22(Pri) on UCH1500 PCI
ATI4 - Active Profile:
S00=000 S01=000 S02=043 S03=013 S04=010 S05=008 S06=002 S07=060
S08=002 S09=006 S10=128 S11=100 S12=050 S13=000 S14=000 S15=001
S16=001 S17=000 S18=000 S19=000 S20=000 S21=000 S22=000 S23=000
S24=050 S25=000 S26=000 S27=008 S28=000 S29=001 S30=002 S31=001
S32=090 S33=009 S34=034 S35=000 S36=000 S37=000 S38=000 S39=002
S40=000 S41=000 S42=000 S43=000 S44=000 S45=250 S46=000 S47=000
S48=000 S49=000 S50=000 S51=000 S52=000 S53=000 S54=000 S55=000
S56=004 S57=000 S58=000 S59=000 S60=001 S61=000 S62=001 S63=000
S64=000 S65=000 S66=000 S67=000 S68=000 S69=000 S70=000 S71=000
S72=019 S73=003 S74=153 S75=000 S76=004 S77=010 S78=000 S79=070
S80=070 S81=000 S82=002 S83=055 S84=000 S85=000 S86=000 S87=000
S88=001
ATI5 - Stored Profile 0:
Not defined
ATI6 - Stored Profile 1:
Not defined
ATI7 - Country: USA
Serial Number: 98638029
Protocol Factor: 29b160b0
ATQ0V1E0 - OK
AT+GMM - Dynamode Smart Express V92 Modem
Ver2.85.02G
AT+FCLASS=? - 0,1
AT#CLS=? - ֺ־ְְִּֽ ֵֽ ֿ־ִִֵ׀ְֲֵֶָׁׂ
AT+GCI? - ֺ־ְְִּֽ ֵֽ ֿ־ִִֵ׀ְֲֵֶָׁׂ
AT+GCI=? - ֺ־ְְִּֽ ֵֽ ֿ־ִִֵ׀ְֲֵֶָׁׂ
ATI1 - Dynamode Smart Express V92 Modem
Dynamode Smart Express V92 Modem
Ver2.85.02G
ATI2 - Dynamode Smart Express V92 Modem
Ver2.85.02G
MO
ATI3 - Dynamode Smart Express V92 Modem
SIL-22(Pri) on UCH1500 PCI
ATI4 - Active Profile:
S00=000 S01=000 S02=043 S03=013 S04=010 S05=008 S06=002 S07=060
S08=002 S09=006 S10=128 S11=100 S12=050 S13=000 S14=000 S15=001
S16=001 S17=000 S18=000 S19=000 S20=000 S21=000 S22=000 S23=000
S24=050 S25=000 S26=000 S27=008 S28=000 S29=001 S30=002 S31=001
S32=090 S33=009 S34=034 S35=000 S36=000 S37=000 S38=000 S39=002
S40=000 S41=000 S42=000 S43=000 S44=000 S45=250 S46=000 S47=000
S48=000 S49=000 S50=000 S51=000 S52=000 S53=000 S54=000 S55=000
S56=004 S57=000 S58=000 S59=000 S60=001 S61=000 S62=001 S63=000
S64=000 S65=000 S66=000 S67=000 S68=000 S69=000 S70=000 S71=000
S72=019 S73=003 S74=153 S75=000 S76=004 S77=010 S78=000 S79=070
S80=070 S81=000 S82=002 S83=055 S84=000 S85=000 S86=000 S87=000
S88=001
ATI5 - Stored Profile 0:
Not defined
ATI6 - Stored Profile 1:
Not defined
ATI7 - Country: USA
Serial Number: 98638029
Protocol Factor: 29b160b0
it looks to be supported by SLMODEMD.gcc4.3
Depending on version of alsa if it is 1.0.18 then get:
http://linmodems.technion.ac.il/packages/smartlink/SLMODEMD_gcc4.3_alsa1.0.18.tar.gz
This where there might be more information needed, ie. modem:1, hw:1, hw:0
when you make the commands
$ sudo slmodemd -c YOUR_COUNTRY --alsa hw:?? or modem:1
Maybe Marv can advice you better here?
Regards,
Antonio
On 5/24/09, Philipp Reznikov <philip007@xxxxxxxxxx> wrote:
> Hi,
> help, please, to install "Dynamode Smart Express V92 Modem" in Ubuntu 9.04,
> kernel 2.6.28-11-generic, running as guest operating system оn VMware
> Workstation 6.5.2. Host OS - Windows Vista SP2.
>
> Dynamode Smart Express V92 Modem is installed in host Windows Vista on COM3.
> Log file in attachment.
> File "ModemData.txt" from scanModem in attachment.
> In VMware Workstation is installed Serial Port with option "Use physical
> serial port COM3".
>
> I try to install driver "slamr-2.6.28-11-generic.tar.gz", which downloaded
> from http://linmodems.technion.ac.il/packages/smartlink/Ubuntu/
> Log file from Terminal in attachment: "Installation_driver.txt"
> There are some errors:
> error: mdm setup: cannot stat `/dev/slamr0': No such file or directory
> error: cannot setup device `/dev/slamr0'
>
> What I must to do? Help, please.
> Thanks
> Philipp
>
>
>
>
