On line 35 of setup, add ; then so it reads: if test -f /etc/modprobe.d/sl-modem-daemon.modutils ; then Then just rerun: $ sudo ./setup MarvS On Fri, May 15, 2009 at 12:36 AM, Dr Jack Trevor Jones <trevor.lorna.jones@xxxxxxxxxxx> wrote: > Thanks for the slamr package. That was what I needed. However when I > installed it and ran setup I got the following: > > trevorj@trevorj-desktop:/media/disk/slamr-2.6.27-14-generic$ > sudo ./setup > installing drivers for kernel version 2.6.27-14-generic > driver=slamr > > Installing the Debian packages supporting autoloading > (Reading database ... 155179 files and directories currently installed.) > Preparing to replace sl-modem-daemon 2.9.10+2.9.9d+e-pre2-5ubuntu4 > (using sl-modem-daemon_2.9.10+2.9.9d+e-pre2-5ubuntu4_i386.deb) ... > Shutting down SmartLink Modem driver normally ... no slmodemd daemon > running. > Unloading modem driver from kernel ... snd_atiixp_modem. > Unpacking replacement sl-modem-daemon ... > Setting up sl-modem-daemon (2.9.10+2.9.9d+e-pre2-5ubuntu4) ... > The system user `Slmodemd' already exists. Exiting. > update-rc.d: warning: /etc/init.d/sl-modem-daemon missing LSB style > header > FATAL: Module ungrab_winmodem not found. > FATAL: Module slamr not found. > Starting SmartLink Modem driver for: auto. > Creating /dev/modem symlink, pointing to: /dev/ttySL0. > > ./setup: 35: Syntax error: "fi" unexpected (expecting "then") > > So I checked the folder which gave: > > > trevorj@trevorj-desktop:/media/disk/slamr-2.6.27-14-generic$ ls > 1st_Read.txt slusb.ko > CountryList.txt Smartlink.txt > setup > ungrab-winmodem.ko > slamr.ko unloading > slmodemd wvdial.txt > sl-modem-daemon_2.9.10+2.9.9d+e-pre2-5ubuntu4_i386.deb > > Any suggestions? > Thanks > Trevor >> Jacques, >> for the Smartlink/ubuntu/ folder >> >> Trevor, >> I made the attached, presuming you really need Smartlink drivers >> for kernel 2.6.27-14-generic. I'll be traveling tomorrow. >> >> MarvS > > >
