OK,
I seem to have gotten a little farther on my own after some days and
with a new setup. I am now using Ubuntu 9.0.4 RC.
I took down all interfaces, made sure /etc/resolv.conf existed and had a
nameserver in it that worked, that all phones, fax machines, answering
machines and DSL modems were disconnected. I am also using
SLMODEMD_gcc4.3_alsa1.0.18. It seems to be prompting me for a password
and regardless of entering it I end up disconnected/timing out.
I am not using Carrier Check = no or Stupid Mode = 1 as they seem to
have not made any difference. If anything they seem like it might be
problematic with them enabled.
Further suggestions would be appreciated.
Here is my setup now and the results:
ubuntu@ubuntu:~$ ifconfig
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:160 errors:0 dropped:0 overruns:0 frame:0
TX packets:160 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:12536 (12.5 KB) TX bytes:12536 (12.5 KB)
ubuntu@ubuntu:~$ cat /etc/resolv.conf
# Generated by NetworkManager
nameserver 207.217.77.82
ubuntu@ubuntu:~$ cat /etc/wvdial.conf
[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=34
Modem Type = Analog Modem
Baud = 460800
New PPPD = yes
Modem = /dev/ttySL0
ISDN = 0
Phone = 9082680050
Password = xxxxxx
Username = xxxxxx
ubuntu@ubuntu:~$ sudo wvdial
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=34
ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=34
OK
--> Modem initialized.
--> Sending: ATDT9082680050
--> Waiting for carrier.
ATDT9082680050
CONNECT 26400
--> Carrier detected. Waiting for prompt.
--> Connected, but carrier signal lost! Retrying...
--> Sending: ATDT9082680050
--> Waiting for carrier.
Level 3 Comm nas115.wee1 UQKT2
Username:/login:/Login:
Username:/login:/Login:
Username:/login:/Login:
Username:/login:/Login:ATDT9082680050
Password: Idle Timeout
NO CARRIER
--> No Carrier! Trying again.
--> Sending: ATDT9082680050
--> Waiting for carrier.
ATDT9082680050
BUSY
--> The line is busy. Trying again.
--> Sending: ATDT9082680050
--> Waiting for carrier.
ATDT9082680050
BUSY
--> The line is busy. Trying again.
--> Sending: ATDT9082680050
--> Waiting for carrier.
ATDT9082680050
BUSY
--> The line is busy. Trying again.
--> Sending: ATDT9082680050
--> Waiting for carrier.
ATDT9082680050
BUSY
--> The line is busy. Trying again.
--> Sending: ATDT9082680050
--> Waiting for carrier.
ATDT9082680050
BUSY
--> The line is busy. Trying again.
--> Sending: ATDT9082680050
--> Waiting for carrier.
ATDT9082680050
BUSY
--> The line is busy. Trying again.
--> Sending: ATDT9082680050
--> Waiting for carrier.
ATDT9082680050
BUSY
--> The line is busy. Trying again.
--> Sending: ATDT9082680050
--> Waiting for carrier.
ATDT9082680050
