> Hello marvin,
> I did as you write, but my modem was not ok.
>
> But ... readind the
> hsfconfig -d
> output file i have seen that hsf kernel was not loaded.
>
> then i tryed
> hsfconfig -k
>
> and after reboot
>
> sudo wvdialconf
>
> found my modem at
>
> /dev/ttySHSF0
>
> after i used scandModem and i send you the last output.
>
> Thanks a lot.
>
> Ciao.
>
> Giampiero
>
>
> Marvin Stodolsky ha scritto:
> > Reboot and try again $ sudo wvdial.conf
>
> > If a failure: $ sudo hsfconfig --help $ sudo hsfconfig --diagnose
> > will write a file to /tmp/ Send it to "Support (Jonathan)"
> > <support@xxxxxxxxxxxx>,
>
> > MarvS
>
> > On Wed, Apr 29, 2009 at 11:06 AM, giampiero lizzi
> > <giampiero.lizzi@xxxxxxxxx> wrote: Hello Marvin, thanks for your
> > help.
>
> > I did as you write ... but
>
>
> > this is the wvdialconf response
>
>
> > giampiero@giampiero-laptop:~/downloads$ sudo wvdialconf
> > /etc/wvdial.conf Editing `/etc/wvdial.conf'.
>
> > Scanning your serial ports for a modem.
>
> > ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
> > ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200
> > baud ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
> > Modem Port Scan<*1>: S1 S2 S3
>
>
> > Sorry, no modem was detected! Is it in use by another program? Did
> > you configure it properly with setserial?
>
> > Please read the FAQ at http://open.nit.ca/wiki/?WvDial
>
> > If you still have problems, send mail to
> > <wvdial-list@xxxxxxxxxxxx>.
>
>
> > Marvin Stodolsky ha scritto:
> >>>> GL
> >>>>
> >>>> First try:
> >>>>
> >>>> From
> >>>> http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php
> >>>> download
> >>>> hsfmodem-7.80.02.02full_k2.6.27_11_generic_ubuntu_i386.deb.zip
> >>>> Under Linux unpack with: $ unzip hsfmodem*.zip Then install
> >>>> with: $ sudo dpkg -i hsfmodem*.deb Subsequently, the modem
> >>>> should be found with $ sudo wvdialconf /etc/wvdial.conf Edit
> >>>> in your personal information with: $ sudo gedit
> >>>> /etc/wvdial.conf and try dialing out with: $ sudo wvdial. See
> >>>> DOCs/Testing.txt for details.
> >>>>
> >>>> Read DOCs/Conexant.txt
> >>>>
> >>>> On Wed, Apr 29, 2009 at 6:35 AM, giampiero lizzi
> >>>> <giampiero.lizzi@xxxxxxxxx> wrote: Thanks .
> >>>>
> >>>> Giampiero Lizzi
> > Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx
> > List Server, as HTML can contain viruses. Use as the email Subject
> > Line: YourName, YourCountry kernel 2.6.27-11-generic With this
> > Subject Line cogent experts will be alerted, and useful case names
> > left in the Archive. YourCountry will enable Country specific
> > guidance. Linux experts in YourCountry can be found through:
> > http://www.linux.org/groups/index.html. They will know your
> > Country's modem code, which may be essential for dialup service.
> > Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an
> > Internet Provider mail filters. So in a day, also check the
> > Archived responses at http://www.linmodems.org
> > -------------------------- System information
> > ---------------------------- CPU=i686, Linux version
> > 2.6.27-11-generic (buildd@vernadsky) (gcc version 4.3.2 (Ubuntu
> > 4.3.2-1ubuntu11) ) #1 SMP Wed Apr 1 20:57:48 UTC 2009 scanModem
> > update of: 2009_04_28 There are no blacklisted modem drivers in
> > /etc/modprobe* files Potentially useful modem drivers now loaded
> > are: snd_hda_intel Attached USB devices are: ID 13fd:1040 Initio
> > Corporation ID 046d:0992 Logitech, Inc. QuickCam Communicate Deluxe
> > ID 0b97:7762 O2 Micro, Inc. Oz776 SmartCard Reader ID 0b97:7761 O2
> > Micro, Inc. Oz776 1.1 Hub ID 413c:a005 Dell Computer Corp. Internal
> > 2.0 Hub ID 1241:1177 Belkin F8E842-DL Mouse If a cellphone is not
> > detected, see
> > http://ubuntuforums.org/archive/index.php/t-878554.html If a USB
> > modem or cellphone is attached and was not detected, please provide
> > available information in your request to discuss@xxxxxxxxxxxxx For
> > candidate card in slot 00:1b.0, firmware information and bootup
> > diagnostics are: PCI slot PCI ID SubsystemID
> > Name ---------- --------- --------- --------------
> > 00:1b.0 8086:27d8 1028:01c8 Audio device: Intel
> > Corporation 82801G Modem interrupt assignment and sharing: 21:
> > 4003 0 IO-APIC-fasteoi uhci_hcd:usb2, HDA Intel ---
> > Bootup diagnostics for card in PCI slot 00:1b.0 ---- [ 0.553213]
> > PCI: 0000:00:1b.0 reg 10 64bit mmio: [efffc000, efffffff] [
> > 0.553213] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [
> > 0.553213] pci 0000:00:1b.0: PME# disabled [ 13.573188] HDA Intel
> > 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [
> > 13.573211] HDA Intel 0000:00:1b.0: setting latency timer to 64 The
> > PCI slot 00:1b.0 of the modem card may be disabled early in a
> > bootup process, but then enabled later. If modem drivers load but
> > the modem is not responsive, read DOCs/Bootup.txt about possible
> > fixes. Send dmesg.txt along with ModemData.txt to
> > discuss@xxxxxxxxxxxxx if help is needed.
> >>>>>
> > ===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
> > The ALSA packages provide audio support and also drivers for some
> > modems. ALSA diagnostics are written during bootup to /proc/asound/
> > folders. The ALSA verion is 1.0.17 The modem cards detected by
> > "aplay -l" are: None
> > The /proc/asound/pcm file reports: ----------------------- 01-00:
> > USB Audio : USB Audio : capture 1 00-01: STAC92xx Digital :
> > STAC92xx Digital : playback 1 00-00: STAC92xx Analog : STAC92xx
> > Analog : playback 1 : capture 1 about /proc/asound/cards:
> > ------------------------ 0 [Intel ]: HDA-Intel - HDA Intel
> > HDA Intel at 0xefffc000 irq 21 1 [U0x46d0x992 ]: USB-Audio -
> > USB Device 0x46d:0x992 USB Device 0x46d:0x992 at
> > usb-0000:00:1d.7-4, high speed PCI slot 00:1b.0 has a High
> > Definition Audio Card The drivers are in the kernel modules tree
> > at:
> > /lib/modules/2.6.27-7-generic/kernel/sound/pci/hda/snd-hda-intel.ko
>
> > /lib/modules/2.6.27-11-generic/kernel/sound/pci/hda/snd-hda-intel.ko
>
> > /lib/modules/2.6.28-11-generic/kernel/sound/pci/hda/snd-hda-intel.ko
> > The modem codec file for the HDA card is:
> > /proc/asound/card0/codec#1
> > -------------------------------------------------------- Codec:
> > Conexant ID 2bfa Address: 1 Vendor Id: 0x14f12bfa Subsystem Id:
> > 0x14f100c3 Revision Id: 0x90000 Modem Function Group: 0x2 The audio
> > card hosts a softmodem chip: 0x14f12bfa 14f1 is the Conexant
> > Vendor ID, and 0x14f12bfa a softmodem chipset. Get a hsfmodem
> > package through http://www.linuxant.com If not a Conexant modem,
> > the driver hsfmodem-drivers with its dependent drivers: ----------
> > provide audio + modem support with the modem chip residing on the
> > subsystem. Any particular card can host any one of several soft
> > modem chips. === Finished firmware and bootup diagnostics, next
> > deducing cogent software. === Predictive diagnostics for card in
> > bus 00:1b.0: Modem chipset detected on NAME="Audio device: Intel
> > Corporation 82801G " CLASS=0403 PCIDEV=8086:27d8 SUBSYS=1028:01c8
> > IRQ=21 HDA=8086:27d8 SOFT=8086:27d8.HDA CHIP=0x14f12bfa
> > IDENT=hsfmodem Driver=hsfmodem-drivers For candidate modem in:
> > 00:1b.0 0403 Audio device: Intel Corporation 82801G Primary device
> > ID: 8086:27d8 Subsystem PCI_id 1028:01c8 Softmodem codec or
> > chipset from diagnostics: 0x14f12bfa from Archives: The HDA card
> > softmodem chip is 0x14f12bfa
> > Support type needed or chipset: hsfmodem
> > Writing DOCs/Intel.txt For owners of a Dell PCs with Conexant HSF
> > modems, a driver source package with full speed enabled is
> > available, but requires driver compiling. Read DOCs/Conexant.txt
> > Start at http://www.linuxant.com/drivers/hsf/downloads-license.php
> > to find the hsfmodem package matching your System. For several
> > Linux distros, there are precompiled drivers matched to specific
> > kernels. These have within the FileName, your KernelVersion:
> > 2.6.27_11_generic They can be found through
> > http://www.linuxant.com/drivers/hsf/full/downloads.php A more
> > precise location may be given a few paragraphs below. If an EXACT
> > Match with your your KernelVersion is not found, one of the
> > "Generic packages with source" near the bottom of the page must be
> > used. Downloaded packages must be moved into the Linux partition
> > (home folder is OK) and unzipped with: unzip hsf*.zip The
> > installation command for a .deb suffic packages is, with root/adm
> > permission: sudo dpkg -i hsf*.deb while for .rpm suffix it is,
> > with: rpm -i hsf*.rpm Support for Conexant chips hosted on High
> > Definition Audio cards may require installation of additional
> > packages, one of the alsa-driver-linuxant packages on
> > http://www.linuxant.com/alsa-driver/ At the same time download the
> > alsa-driver-1.0.17-1.patch , in case it prove to be later needed.
> > During the hsfmodem install, there will be a message if there is
> > necessary installation of alsa-driver-linuxant The installation
> > command for a .deb suffic packages is, with root/adm permission:
> > sudo alsa* -i hsf*.deb while for .rpm suffix it is, with: rpm -i
> > hsf*.rpm There may a message that "Dependencies" are not satisfied.
> > In this case the Ubuntu/Debian packages to be installed are
> > linux-libc-dev & libc6-dev. Package names may be different for
> > other Linuxes. If not on your install CD, these packages can be
> > searched for at http://packages.ubuntu.com. After download, they
> > can be coinstalled with: sudo dpkg -i li*.deb Again try the
> > alsa-driver-linuxant There may be a message that the patch must be
> > applied. In this case get the
> > ftp://ftp.alsa-project.org/pub/driver/alsa-driver-1.0.17.tar.bz2
> > Under Linux, this package is unpacked with: $ tar jxf alsa*.tar.bz2
> > Next the patch is applied with: $ patch -p0 <
> > alsa-driver-1.0.17-1.patch See
> > http://linmodems.technion.ac.il/bigarch/archive-eighth/msg00838.html
> > for details on compiling and installing replacement snd-hda-intel
> > + its dependent drivers. After the installation is completed, rerun
> > the hsfmodem installation. Reboot and try to detect the modem with
> > Root permission: sudo wvdialconf /etc/wvdial.conf From
> > http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php
> > download
> > hsfmodem-7.80.02.02full_k2.6.27_11_generic_ubuntu_i386.deb.zip
> > Under Linux unpack with: $ unzip hsfmodem*.zip Then install with: $
> > sudo dpkg -i hsfmodem*.deb Subsequently, the modem should be found
> > with $ sudo wvdialconf /etc/wvdial.conf Edit in your personal
> > information with: $ sudo gedit /etc/wvdial.conf and try dialing out
> > with: $ sudo wvdial. See DOCs/Testing.txt for details. Read
> > DOCs/Conexant.txt Writing DOCs/Conexant.txt
> > Completed candidate modem analyses. The base of the UDEV device
> > file system is: /dev/.udev Versions adequately match for the
> > compiler installed: 4.3.2 and the compiler used in kernel assembly:
> > 4.3.3
> >>>>>
> > Minimal compiling resources appear complete: make utility -
> > /usr/bin/make Compiler version 4.3 linuc_headers base folder
> > /lib/modules/2.6.27-11-generic/build However some compilations and
> > executable functions may need additional files, in the FileNames.h
> > (so called kernel "h"eaders) collection installed in /usr/include/
> > . For martian_modem, additional required packages are needed. The
> > also required headers of package libc6 are commonly installed by
> > default. Compiling hsfmodem drivers does require linux-libc-dev and
> > libc6-dev packages, for kernels 2.6.24 and later versions. In not
> > included on your install CD, search for them at
> > http://packages.ubuntu.com or comparable Repository for other Linux
> > distros. When compiling ALSA drivers, the utility "patch" will also
> > be needed.
> >>>>>
> >>>>>
> > If a driver compilation fails, with message including some lack of
> > some FileName.h (stdio.h for example), then Some additional
> > kernel-header files need installation to /usr/include. The minimal
> > additional packages are libc6-dev and any of its dependents, under
> > Ubuntu linux-libc-dev If an alternate ethernet connection is
> > available, $ apt-get update $ apt-get -s install
> > linux-kernel-devel will install needed packages. For Debian/Ubuntu
> > related distributions, run the following command to display the
> > needed package list: Otherwise packages have to be found through
> > http://packages.ubuntu.com Once downloaded and transferred into a
> > Linux partition, they can be installed alltogether with: $ sudo
> > dpkg -i *.deb
> > Checking pppd properties: -rwsr-xr-- 1 root dip 277352 2009-02-20
> > 18:25 /usr/sbin/pppd In case of an "error 17" "serial loopback"
> > problem, see:
> > http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
> > To enable dialout without Root permission do: $ su - root (not
> > for Ubuntu) sudo chmod a+x /usr/sbin/pppd or under Ubuntu related
> > Linuxes sudo chmod a+x /usr/sbin/pppd Checking settings of:
> > /etc/ppp/options asyncmap 0 noauth crtscts lock hide-password modem
> > proxyarp lcp-echo-interval 30 lcp-echo-failure 4 noipx In case of
> > a message like: Warning: Could not modify /etc/ppp/pap-secrets:
> > Permission denied see
> > http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
> > Read Modem/DOCs/YourSystem.txt concerning other COMM channels:
> > eth0 virbr0 vmnet1 vmnet8 wlan0 wmaster0 Which can interfere with
> > Browser naviagation. Don't worry about the following, it is for
> > experts should trouble shooting be necessary.
> > ========================================================== Checking
> > for modem support lines: --------------------------------------
> > /device/modem symbolic link: slmodemd created symbolic link
> > /dev/ttySL0: Within /etc/udev/ files: Within /etc/modprobe.conf
> > files: /etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem
> > index=-2 /etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem
> > index=-2 /etc/modprobe.d/blacklist-modem.conf:# Uncomment these
> > entries in order to blacklist unwanted modem drivers
> > /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
> > /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
> > Within any ancient /etc/devfs files: Within ancient kernel 2.4.n
> > /etc/module.conf files: --------- end modem support lines --------
> >>>>>
> >>
> Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List
> Server,
> as HTML can contain viruses. Use as the email Subject Line:
> YourName, YourCountry kernel 2.6.27-11-generic
> With this Subject Line cogent experts will be alerted, and useful
> case names left in the Archive.
> YourCountry will enable Country specific guidance. Linux experts in
> YourCountry
> can be found through: http://www.linux.org/groups/index.html.
> They will know your Country's modem code, which may be essential for
> dialup service.
> Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an
> Internet Provider mail filters.
> So in a day, also check the Archived responses at
> http://www.linmodems.org
> -------------------------- System information
> ----------------------------
> CPU=i686,
> Linux version 2.6.27-11-generic (buildd@vernadsky) (gcc version 4.3.2
> (Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Wed Apr 1 20:57:48 UTC 2009
> scanModem update of: 2009_04_28
> There are no blacklisted modem drivers in /etc/modprobe* files
> Potentially useful modem drivers now loaded are:
> snd_atiixp_modem snd_via82xx_modem snd_intel8x0m snd_hda_intel
> Attached USB devices are:
> ID 046d:0992 Logitech, Inc. QuickCam Communicate Deluxe
> ID 13fd:1040 Initio Corporation
> ID 413c:a005 Dell Computer Corp. Internal 2.0 Hub
> ID 1241:1177 Belkin F8E842-DL Mouse
> ID 0b97:7762 O2 Micro, Inc. Oz776 SmartCard Reader
> ID 0b97:7761 O2 Micro, Inc. Oz776 1.1 Hub
> If a cellphone is not detected, see
> http://ubuntuforums.org/archive/index.php/t-878554.html
> If a USB modem or cellphone is attached and was not detected, please
> provide available information in your request to discuss@xxxxxxxxxxxxx
> For candidate card in slot 00:1b.0, firmware information and bootup
> diagnostics are:
> PCI slot PCI ID SubsystemID Name
> ---------- --------- --------- --------------
> 00:1b.0 8086:27d8 1028:01c8 Audio device: Intel
> Corporation 82801G
> Modem interrupt assignment and sharing:
> 21: 336439 0 IO-APIC-fasteoi uhci_hcd:usb2, HDA Intel
> --- Bootup diagnostics for card in PCI slot 00:1b.0 ----
> [ 0.553255] PCI: 0000:00:1b.0 reg 10 64bit mmio: [efffc000, efffffff]
> [ 0.553255] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
> [ 0.553255] pci 0000:00:1b.0: PME# disabled
> [ 13.573944] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level,
> low) -> IRQ 21
> [ 13.573967] HDA Intel 0000:00:1b.0: setting latency timer to 64
> The PCI slot 00:1b.0 of the modem card may be disabled early in
> a bootup process, but then enabled later. If modem drivers load
> but the modem is not responsive, read DOCs/Bootup.txt about possible
> fixes.
> Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
> if help is needed.
> >>
> >>
> ===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
> The ALSA packages provide audio support and also drivers for some modems.
> ALSA diagnostics are written during bootup to /proc/asound/ folders.
> The ALSA verion is 1.0.17
> The modem cards detected by "aplay -l" are: None
> >>
> The /proc/asound/pcm file reports:
> -----------------------
> 01-00: USB Audio : USB Audio : capture 1
> 00-01: STAC92xx Digital : STAC92xx Digital : playback 1
> 00-00: STAC92xx Analog : STAC92xx Analog : playback 1 : capture 1
> about /proc/asound/cards:
> ------------------------
> 0 [Intel ]: HDA-Intel - HDA Intel
> HDA Intel at 0xefffc000 irq 21
> 1 [U0x46d0x992 ]: USB-Audio - USB Device 0x46d:0x992
> USB Device 0x46d:0x992 at usb-0000:00:1d.7-4,
> high speed
> PCI slot 00:1b.0 has a High Definition Audio Card
> The drivers are in the kernel modules tree at:
> /lib/modules/2.6.27-7-generic/kernel/sound/pci/hda/snd-hda-intel.ko
> /lib/modules/2.6.27-11-generic/kernel/sound/pci/hda/snd-hda-intel.ko
> /lib/modules/2.6.28-11-generic/kernel/sound/pci/hda/snd-hda-intel.ko
> The modem codec file for the HDA card is: /proc/asound/card0/codec#1
> --------------------------------------------------------
> Codec: Conexant ID 2bfa
> Address: 1
> Vendor Id: 0x14f12bfa
> Subsystem Id: 0x14f100c3
> Revision Id: 0x90000
> Modem Function Group: 0x2
> The audio card hosts a softmodem chip: 0x14f12bfa
> 14f1 is the Conexant Vendor ID, and 0x14f12bfa a softmodem chipset.
> Get a hsfmodem package through http://www.linuxant.com
> If not a Conexant modem, the driver hsfmodem-drivers with its
> dependent drivers:
> ----------
> provide audio + modem support with the modem chip residing on the
> subsystem.
> Any particular card can host any one of several soft modem chips.
> === Finished firmware and bootup diagnostics, next deducing cogent
> software. ===
> Predictive diagnostics for card in bus 00:1b.0:
> Modem chipset detected on
> NAME="Audio device: Intel Corporation 82801G "
> CLASS=0403
> PCIDEV=8086:27d8
> SUBSYS=1028:01c8
> IRQ=21
> HDA=8086:27d8
> SOFT=8086:27d8.HDA
> CHIP=0x14f12bfa
> IDENT=hsfmodem
> Driver=hsfmodem-drivers
> For candidate modem in: 00:1b.0
> 0403 Audio device: Intel Corporation 82801G
> Primary device ID: 8086:27d8
> Subsystem PCI_id 1028:01c8
> Softmodem codec or chipset from diagnostics: 0x14f12bfa
> from Archives:
> The HDA card softmodem chip is 0x14f12bfa
> >>
> Support type needed or chipset: hsfmodem
> >>
> Writing DOCs/Intel.txt
> For owners of a Dell PCs with Conexant HSF modems, a driver source
> package with full speed enabled is available, but requires driver
> compiling. Read DOCs/Conexant.txt
> >>
> Start at http://www.linuxant.com/drivers/hsf/downloads-license.php to
> find the
> hsfmodem package matching your System. For several Linux distros,
> there are
> precompiled drivers matched to specific kernels. These have within the
> FileName,
> your KernelVersion: 2.6.27_11_generic
> They can be found through
> http://www.linuxant.com/drivers/hsf/full/downloads.php
> A more precise location may be given a few paragraphs below.
> If an EXACT Match with your your KernelVersion is not found, one of the
> "Generic packages with source" near the bottom of the page must be used.
> Downloaded packages must be moved into the Linux partition (home
> folder is OK)
> and unzipped with:
> unzip hsf*.zip
> The installation command for a .deb suffic packages is, with root/adm
> permission:
> sudo dpkg -i hsf*.deb
> while for .rpm suffix it is, with:
> rpm -i hsf*.rpm
> Support for Conexant chips hosted on High Definition Audio cards may
> require
> installation of additional packages, one of the alsa-driver-linuxant
> packages
> on http://www.linuxant.com/alsa-driver/ At the same time download the
> alsa-driver-1.0.17-1.patch , in case it prove to be later needed.
> During the
> hsfmodem install, there will be a message if there is necessary
> installation of
> alsa-driver-linuxant
> The installation command for a .deb suffic packages is, with root/adm
> permission:
> sudo alsa* -i hsf*.deb
> while for .rpm suffix it is, with:
> rpm -i hsf*.rpm
> There may a message that "Dependencies" are not satisfied. In this
> case the Ubuntu/Debian packages to be installed are linux-libc-dev &
> libc6-dev. Package
> names may be different for other Linuxes. If not on your install CD, these
> packages can be searched for at http://packages.ubuntu.com. After
> download,
> they can be coinstalled with:
> sudo dpkg -i li*.deb
> Again try the alsa-driver-linuxant
> There may be a message that the patch must be applied. In this case
> get the
> ftp://ftp.alsa-project.org/pub/driver/alsa-driver-1.0.17.tar.bz2
> Under Linux, this package is unpacked with:
> $ tar jxf alsa*.tar.bz2
> Next the patch is applied with:
> $ patch -p0 < alsa-driver-1.0.17-1.patch
> See http://linmodems.technion.ac.il/bigarch/archive-eighth/msg00838.html
> for details on compiling and installing replacement snd-hda-intel + its
> dependent drivers.
> After the installation is completed, rerun the hsfmodem installation.
> Reboot and try to detect the modem with Root permission:
> sudo wvdialconf /etc/wvdial.conf
> From http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php
> download hsfmodem-7.80.02.02full_k2.6.27_11_generic_ubuntu_i386.deb.zip
> Under Linux unpack with:
> $ unzip hsfmodem*.zip
> Then install with:
> $ sudo dpkg -i hsfmodem*.deb
> Subsequently, the modem should be found with
> $ sudo wvdialconf /etc/wvdial.conf
> Edit in your personal information with:
> $ sudo gedit /etc/wvdial.conf
> and try dialing out with:
> $ sudo wvdial.
> See DOCs/Testing.txt for details.
> Read DOCs/Conexant.txt
> Writing DOCs/Conexant.txt
> >>
> Completed candidate modem analyses.
> The base of the UDEV device file system is: /dev/.udev
> Versions adequately match for the compiler installed: 4.3.2
> and the compiler used in kernel assembly: 4.3.3
> >>
> >>
> Minimal compiling resources appear complete:
> make utility - /usr/bin/make
> Compiler version 4.3
> linuc_headers base folder /lib/modules/2.6.27-11-generic/build
> However some compilations and executable functions may need
> additional files,
> in the FileNames.h (so called kernel "h"eaders) collection installed
> in /usr/include/ .
> For martian_modem, additional required packages are needed. The also
> required headers of package libc6 are commonly installed by default.
> Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev
> packages, for kernels 2.6.24 and later versions.
> In not included on your install CD, search for them at
> http://packages.ubuntu.com
> or comparable Repository for other Linux distros.
> When compiling ALSA drivers, the utility "patch" will also be needed.
> >>
> >>
> >>
> If a driver compilation fails, with message including some lack of
> some FileName.h (stdio.h for example), then
> Some additional kernel-header files need installation to /usr/include.
> The minimal additional packages are libc6-dev
> and any of its dependents, under Ubuntu linux-libc-dev
> If an alternate ethernet connection is available,
> $ apt-get update
> $ apt-get -s install linux-kernel-devel
> will install needed packages.
> For Debian/Ubuntu related distributions, run the following command to
> display the needed package list:
> Otherwise packages have to be found through http://packages.ubuntu.com
> Once downloaded and transferred into a Linux partition,
> they can be installed alltogether with:
> $ sudo dpkg -i *.deb
> >>
> Checking pppd properties:
> -rwsr-xr-- 1 root dip 277352 2009-02-20 18:25 /usr/sbin/pppd
> In case of an "error 17" "serial loopback" problem, see:
> http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
> To enable dialout without Root permission do:
> $ su - root (not for Ubuntu)
> sudo chmod a+x /usr/sbin/pppd
> or under Ubuntu related Linuxes
> sudo chmod a+x /usr/sbin/pppd
> Checking settings of: /etc/ppp/options
> asyncmap 0
> noauth
> crtscts
> lock
> hide-password
> modem
> proxyarp
> lcp-echo-interval 30
> lcp-echo-failure 4
> noipx
> In case of a message like:
> Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
> see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
> Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
> virbr0 vmnet1 vmnet8 wlan0 wmaster0
> Which can interfere with Browser naviagation.
> Don't worry about the following, it is for experts should trouble
> shooting be necessary.
> ==========================================================
> Checking for modem support lines:
> --------------------------------------
> /device/modem symbolic link:
> slmodemd created symbolic link /dev/ttySL0:
> Within /etc/udev/ files:
> Within /etc/modprobe.conf files:
> /etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
> /etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
> /etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in
> order to blacklist unwanted modem drivers
> /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
> /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
> Within any ancient /etc/devfs files:
> Within ancient kernel 2.4.n /etc/module.conf files:
> --------- end modem support lines --------
> >>
> >>
>
Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 2.6.27-11-generic
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=i686,
Linux version 2.6.27-11-generic (buildd@vernadsky) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Wed Apr 1 20:57:48 UTC 2009
scanModem update of: 2009_04_28
The modem symbolic link is /dev/modem -> ttySL0
There are no blacklisted modem drivers in /etc/modprobe* files
Potentially useful modem drivers now loaded are:
Attached USB devices are:
ID 413c:a005 Dell Computer Corp. Internal 2.0 Hub
ID 0b97:7762 O2 Micro, Inc. Oz776 SmartCard Reader
ID 0b97:7761 O2 Micro, Inc. Oz776 1.1 Hub
ID 13fd:1040 Initio Corporation
ID 1241:1177 Belkin F8E842-DL Mouse
ID 046d:0992 Logitech, Inc. QuickCam Communicate Deluxe
If a cellphone is not detected, see http://ubuntuforums.org/archive/index.php/t-878554.html
If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@xxxxxxxxxxxxx
For candidate card in slot 00:1b.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:1b.0 8086:27d8 1028:01c8 Audio device: Intel Corporation 82801G
Modem interrupt assignment and sharing:
21: 124365 0 IO-APIC-fasteoi uhci_hcd:usb3
--- Bootup diagnostics for card in PCI slot 00:1b.0 ----
[ 0.553213] PCI: 0000:00:1b.0 reg 10 64bit mmio: [efffc000, efffffff]
[ 0.553213] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.553213] pci 0000:00:1b.0: PME# disabled
[ 14.864326] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 14.864349] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 165.538072] HDA Intel 0000:00:1b.0: PCI INT A disabled
The PCI slot 00:1b.0 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.
The ALSA verion is 1.0.17
The modem cards detected by "aplay -l" are: None
The /proc/asound/pcm file reports:
-----------------------
01-00: USB Audio : USB Audio : capture 1
about /proc/asound/cards:
------------------------
1 [U0x46d0x992 ]: USB-Audio - USB Device 0x46d:0x992
USB Device 0x46d:0x992 at usb-0000:00:1d.7-4, high speed
PCI slot 00:1b.0 has a High Definition Audio Card
The drivers are in the kernel modules tree at:
/lib/modules/2.6.27-7-generic/kernel/sound/pci/hda/snd-hda-intel.ko
/lib/modules/2.6.27-11-generic/updates/snd-hda-intel.ko
/lib/modules/2.6.28-11-generic/kernel/sound/pci/hda/snd-hda-intel.ko
UNEXPECTED HDA diagnostic outcome.
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===
A candidate modem is not evident among the PCI devices:
------------------------------------------------
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 01)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
01:00.0 VGA compatible controller: nVidia Corporation G72GL [Quadro FX 350M] (rev a1)
03:01.4 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev 02)
09:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5752 Gigabit Ethernet PCI Express (rev 02)
0c:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)
------------------------------------------------
with USB and bridge devices not displayed.
If your modem is connected by an external serial cable,
or mounted internally on an ISA card, scanModem would not access it.
Try with Root permission
$ sudo wvdialconf /etc/wvdial.conf
to detect these modem types and some USB modems.
If the detection is successful, read the DOCs/wvdial.txt .
Edit the /etc/wvdial.conf with Root permission:
sudo gedit /etc/wvdial.conf
will be able to dial out with Root permission:
sudo wvdial
Many modems for which scanModem fails have Conexant chips.
From http://www.linuxant.com/drivers/modemident.php
get the ListModem tool, which will report on Conexant chipset modems
If the above tests fail, please provide any independent information available on your modem.
If an alternative boot into Microsoft windows can be done, do mouse
clicks on:
Start > Settings > Control Panel > Classical View (for Window XP) > System
> Hardware > Device Manager > Modems > Click on the + > Modem. Double click to
expand the graphic. Manufacturer information may be displayed. For example, CXT
stands for Conexant. Click the Diagnostics Tab. Record any hardware ID or vendor
and device information. From the Driver Details TAB, copy out the VENdor and DEVice information.
Next do the Query Modem and record the ATI specifications displayed such as:
ATI3 - Agere SoftModem Version 2.1.22
ATI5 - 2.1.22, AMR Intel MB, AC97 ID:SIL REV:0x27
Try to identify the modem setup file, with name perhaps MODEM.INF.
If may contain chipset Vendor informaton.
Predictive diagnostics for card in bus 00:1b.0:
Modem chipset not detected on
NAME="Audio device: Intel Corporation 82801G "
CLASS=0403
PCIDEV=8086:27d8
SUBSYS=1028:01c8
IRQ=21
HDA=8086:27d8
SOFT=8086:27d8.HDA
High Definition Audio (HDA) cards MAY host a modem chip in their Subsystem,
and many are supported by the ALSA audio+modem driver snd-hda-intel
A modem was not detected on HDA card 8086:27d8.
If another modem card is present, then most likely 8086:27d8 does not host a modem.
If another modem card has not been detected, then possibilities are:
1) A Conexant modem chip is present on 8086:27d8, as Conexant chips
are frequently not detectable by ALSA diagnostics
2) The modem may be of the older non-PCI Controller Chipset (hardware) type.
Try detection with Root permission:
sudo wvdialconf /etc/wvdial.conf
For candidate modem in: 00:1b.0
0403 Audio device: Intel Corporation 82801G
Primary device ID: 8086:27d8
Subsystem PCI_id 1028:01c8
Softmodem codec or chipset from diagnostics:
from Archives:
Support type needed or chipset:
Support can likely be achieved through two mutually exclusive alternatives:
1) The hsfmodem software for Conexant chipset modems: Read DOCs/Conexant.txt
The following ALSA alternative CANNOT work with Conexant modems.
2) An ALSA modem driver plus slmodemd. Read DOCs/Smartlink.txt for details, and
to test get the package SLMODEMD.gcc4.3.tar.gz from:
http://linmodems.technion.ac.il/packages/smartlink/
Writing DOCs/Intel.txt
For owners of a Dell PCs with Conexant HSF modems, a driver source package with full speed enabled is available, but requires driver compiling. Read DOCs/Conexant.txt
Start at http://www.linuxant.com/drivers/hsf/downloads-license.php to find the
hsfmodem package matching your System. For several Linux distros, there are
precompiled drivers matched to specific kernels. These have within the FileName,
your KernelVersion: 2.6.27_11_generic
They can be found through http://www.linuxant.com/drivers/hsf/full/downloads.php
A more precise location may be given a few paragraphs below.
If an EXACT Match with your your KernelVersion is not found, one of the
"Generic packages with source" near the bottom of the page must be used.
Downloaded packages must be moved into the Linux partition (home folder is OK)
and unzipped with:
unzip hsf*.zip
The installation command for a .deb suffic packages is, with root/adm permission:
sudo dpkg -i hsf*.deb
while for .rpm suffix it is, with:
rpm -i hsf*.rpm
Support for Conexant chips hosted on High Definition Audio cards may require
installation of additional packages, one of the alsa-driver-linuxant packages
on http://www.linuxant.com/alsa-driver/ At the same time download the
alsa-driver-1.0.17-1.patch , in case it prove to be later needed. During the
hsfmodem install, there will be a message if there is necessary installation of
alsa-driver-linuxant
The installation command for a .deb suffic packages is, with root/adm permission:
sudo alsa* -i hsf*.deb
while for .rpm suffix it is, with:
rpm -i hsf*.rpm
There may a message that "Dependencies" are not satisfied. In this case the Ubuntu/Debian packages to be installed are linux-libc-dev & libc6-dev. Package
names may be different for other Linuxes. If not on your install CD, these
packages can be searched for at http://packages.ubuntu.com. After download,
they can be coinstalled with:
sudo dpkg -i li*.deb
Again try the alsa-driver-linuxant
There may be a message that the patch must be applied. In this case get the
ftp://ftp.alsa-project.org/pub/driver/alsa-driver-1.0.17.tar.bz2
Under Linux, this package is unpacked with:
$ tar jxf alsa*.tar.bz2
Next the patch is applied with:
$ patch -p0 < alsa-driver-1.0.17-1.patch
See http://linmodems.technion.ac.il/bigarch/archive-eighth/msg00838.html
for details on compiling and installing replacement snd-hda-intel + its
dependent drivers.
After the installation is completed, rerun the hsfmodem installation.
Reboot and try to detect the modem with Root permission:
sudo wvdialconf /etc/wvdial.conf
From http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php
download hsfmodem-7.80.02.02full_k2.6.27_11_generic_ubuntu_i386.deb.zip
Under Linux unpack with:
$ unzip hsfmodem*.zip
Then install with:
$ sudo dpkg -i hsfmodem*.deb
Subsequently, the modem should be found with
$ sudo wvdialconf /etc/wvdial.conf
Edit in your personal information with:
$ sudo gedit /etc/wvdial.conf
and try dialing out with:
$ sudo wvdial.
See DOCs/Testing.txt for details.
Read DOCs/Conexant.txt
Writing DOCs/Conexant.txt
Writing DOCs/Smartlink.txt
============ end Smartlink section =====================
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.3.2
and the compiler used in kernel assembly: 4.3.3
Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.3
linuc_headers base folder /lib/modules/2.6.27-11-generic/build
However some compilations and executable functions may need additional files,
in the FileNames.h (so called kernel "h"eaders) collection installed in /usr/include/ .
For martian_modem, additional required packages are needed. The also required headers of package libc6 are commonly installed by default.
Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
In not included on your install CD, search for them at http://packages.ubuntu.com
or comparable Repository for other Linux distros.
When compiling ALSA drivers, the utility "patch" will also be needed.
If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking pppd properties:
-rwsr-xr-- 1 root dip 277352 2009-02-20 18:25 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
sudo chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 virbr0 vmnet1 vmnet8 wlan0 wmaster0
Which can interfere with Browser naviagation.
Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link: lrwxrwxrwx 1 root root 6 2009-04-30 09:52 /dev/modem -> ttySL0
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
Within /etc/modprobe.conf files:
/etc/modprobe.d/hsf.conflicts.conf:install snd-via82xx-modem /bin/true # temporarily disabled by hsf - conflicts with hsfmc97via
/etc/modprobe.d/hsf.conflicts.conf:install snd-atiixp-modem /bin/true # temporarily disabled by hsf - conflicts with hsfmc97ati
/etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
/etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
