Re: can halp me to configure modem?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Reboot and try again
$ sudo wvdial.conf

If a failure:
$ sudo hsfconfig --help
$ sudo hsfconfig  --diagnose
will write a file to /tmp/
Send it to "Support (Jonathan)" <support@xxxxxxxxxxxx>,

MarvS

On Wed, Apr 29, 2009 at 11:06 AM, giampiero lizzi
<giampiero.lizzi@xxxxxxxxx> wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> Hello Marvin,
> thanks for your help.
>
> I did as you write ... but
>
>
> this is the wvdialconf response
>
>
> giampiero@giampiero-laptop:~/downloads$ sudo wvdialconf /etc/wvdial.conf
> Editing `/etc/wvdial.conf'.
>
> Scanning your serial ports for a modem.
>
> ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
> ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
> ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
> Modem Port Scan<*1>: S1   S2   S3
>
>
> Sorry, no modem was detected!  Is it in use by another program?
> Did you configure it properly with setserial?
>
> Please read the FAQ at http://open.nit.ca/wiki/?WvDial
>
> If you still have problems, send mail to <wvdial-list@xxxxxxxxxxxx>.
>
>
> Marvin Stodolsky ha scritto:
>> GL
>>
>> First try:
>>
>> From
>> http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php
>> download
>> hsfmodem-7.80.02.02full_k2.6.27_11_generic_ubuntu_i386.deb.zip
>> Under Linux unpack with: $ unzip hsfmodem*.zip Then install with: $
>> sudo dpkg -i hsfmodem*.deb Subsequently, the modem should be found
>> with $ sudo wvdialconf /etc/wvdial.conf Edit in your personal
>> information with: $ sudo gedit /etc/wvdial.conf and try dialing out
>> with: $ sudo wvdial. See DOCs/Testing.txt  for details.
>>
>> Read DOCs/Conexant.txt
>>
>> On Wed, Apr 29, 2009 at 6:35 AM, giampiero lizzi
>> <giampiero.lizzi@xxxxxxxxx> wrote: Thanks .
>>
>> Giampiero Lizzi
>>>
>  Only plain text email is forwarded by the  Discuss@xxxxxxxxxxxxx List
> Server,
>  as HTML can contain viruses. Use as the email Subject Line:
>          YourName, YourCountry  kernel 2.6.27-11-generic
>  With this Subject Line cogent experts will be alerted, and useful
> case names left in the Archive.
>  YourCountry will enable Country specific guidance. Linux experts in
> YourCountry
>  can be found through: http://www.linux.org/groups/index.html.
> They will know your Country's modem code, which may be essential for
> dialup service.
> Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an
> Internet Provider mail filters.
>  So in a day, also check the Archived responses at
> http://www.linmodems.org
> - --------------------------  System information
> - ----------------------------
> CPU=i686,
> Linux version 2.6.27-11-generic (buildd@vernadsky) (gcc version 4.3.2
> (Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Wed Apr 1 20:57:48 UTC 2009
>  scanModem update of:  2009_04_28
>>>
>  There are no blacklisted modem drivers in /etc/modprobe*  files
>  Potentially useful modem drivers now loaded are:
>        snd_hda_intel
>>>
> Attached USB devices are:
>  ID 13fd:1040 Initio Corporation
>  ID 046d:0992 Logitech, Inc. QuickCam Communicate Deluxe
>  ID 0b97:7762 O2 Micro, Inc. Oz776 SmartCard Reader
>  ID 0b97:7761 O2 Micro, Inc. Oz776 1.1 Hub
>  ID 413c:a005 Dell Computer Corp. Internal 2.0 Hub
>  ID 1241:1177 Belkin F8E842-DL Mouse
> If a cellphone is not detected, see
> http://ubuntuforums.org/archive/index.php/t-878554.html
>>>
> If a USB modem or cellphone is attached and was not detected, please
> provide available information in your request to discuss@xxxxxxxxxxxxx
>>>
> For candidate card in slot 00:1b.0, firmware information and bootup
> diagnostics are:
>  PCI slot       PCI ID          SubsystemID     Name
>  ----------     ---------       ---------       --------------
>  00:1b.0        8086:27d8       1028:01c8       Audio device: Intel
> Corporation 82801G
>>>
>  Modem interrupt assignment and sharing:
>  21:       4003          0   IO-APIC-fasteoi   uhci_hcd:usb2, HDA Intel
>  --- Bootup diagnostics for card in PCI slot 00:1b.0 ----
> [    0.553213] PCI: 0000:00:1b.0 reg 10 64bit mmio: [efffc000, efffffff]
> [    0.553213] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
> [    0.553213] pci 0000:00:1b.0: PME# disabled
> [   13.573188] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level,
> low) -> IRQ 21
> [   13.573211] HDA Intel 0000:00:1b.0: setting latency timer to 64
>>>
>  The PCI slot 00:1b.0 of the modem card may be disabled early in
>  a bootup process,  but then enabled later. If modem drivers load
>  but the  modem is not responsive, read DOCs/Bootup.txt about possible
> fixes.
>  Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
>  if help is needed.
>>>
>>>
>>>
> ===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
> The ALSA packages provide audio support and also drivers for some modems.
> ALSA diagnostics are written during bootup to /proc/asound/ folders.
>>>
> The ALSA verion is 1.0.17
> The modem cards detected by "aplay -l"  are: None
>>>
>>>
> The /proc/asound/pcm file reports:
> - -----------------------
> 01-00: USB Audio : USB Audio : capture 1
> 00-01: STAC92xx Digital : STAC92xx Digital : playback 1
> 00-00: STAC92xx Analog : STAC92xx Analog : playback 1 : capture 1
>>>
> about /proc/asound/cards:
> - ------------------------
>  0 [Intel          ]: HDA-Intel - HDA Intel
>                     HDA Intel at 0xefffc000 irq 21
>  1 [U0x46d0x992    ]: USB-Audio - USB Device 0x46d:0x992
>                     USB Device 0x46d:0x992 at usb-0000:00:1d.7-4,
> high speed
>>>
>  PCI slot 00:1b.0 has a High Definition Audio Card
>  The drivers are in the kernel modules tree at:
>  /lib/modules/2.6.27-7-generic/kernel/sound/pci/hda/snd-hda-intel.ko
> /lib/modules/2.6.27-11-generic/kernel/sound/pci/hda/snd-hda-intel.ko
> /lib/modules/2.6.28-11-generic/kernel/sound/pci/hda/snd-hda-intel.ko
>  The modem codec file for the HDA card is: /proc/asound/card0/codec#1
> - --------------------------------------------------------
> Codec: Conexant ID 2bfa
> Address: 1
> Vendor Id: 0x14f12bfa
> Subsystem Id: 0x14f100c3
> Revision Id: 0x90000
> Modem Function Group: 0x2
>>>
>  The audio card hosts a softmodem chip:  0x14f12bfa
>>>
>  14f1 is the Conexant Vendor ID, and 0x14f12bfa a softmodem chipset.
>  Get a hsfmodem package through http://www.linuxant.com
>>>
> If not a Conexant modem, the driver hsfmodem-drivers with its
> dependent drivers:
>>>
> - ----------
> provide audio + modem support with the modem chip residing on the
> subsystem.
> Any particular card can host any one of several soft modem chips.
>>>
> === Finished firmware and bootup diagnostics, next deducing cogent
> software. ===
>>>
> Predictive  diagnostics for card in bus 00:1b.0:
>       Modem chipset  detected on
> NAME="Audio device: Intel Corporation 82801G "
> CLASS=0403
> PCIDEV=8086:27d8
> SUBSYS=1028:01c8
> IRQ=21
> HDA=8086:27d8
> SOFT=8086:27d8.HDA
> CHIP=0x14f12bfa
> IDENT=hsfmodem
> Driver=hsfmodem-drivers
>>>
>  For candidate modem in:  00:1b.0
>  0403 Audio device: Intel Corporation 82801G
>     Primary device ID:  8086:27d8
>   Subsystem PCI_id  1028:01c8
>   Softmodem codec or chipset from diagnostics: 0x14f12bfa
>                              from    Archives:
>                       The HDA card softmodem chip is 0x14f12bfa
>>>
>>>
> Support type needed or chipset: hsfmodem
>>>
>>>
> Writing DOCs/Intel.txt
>>>
> For owners of a Dell PCs with Conexant HSF modems, a driver source
> package with full speed enabled is available, but requires driver
> compiling. Read DOCs/Conexant.txt
>>>
>>>
> Start at http://www.linuxant.com/drivers/hsf/downloads-license.php to
> find the
> hsfmodem package matching your System. For several Linux distros,
> there are
> precompiled drivers matched to specific kernels. These have within the
> FileName,
> your KernelVersion:     2.6.27_11_generic
> They can be found through
> http://www.linuxant.com/drivers/hsf/full/downloads.php
> A more precise location may be given a few paragraphs below.
> If an EXACT Match with your your KernelVersion is not found, one of the
> "Generic packages with source" near the bottom of the page must be used.
> Downloaded packages must be moved into the Linux partition (home
> folder is OK)
> and unzipped with:
>       unzip hsf*.zip
> The installation command for a .deb suffic packages is, with root/adm
> permission:
>  sudo dpkg -i hsf*.deb
> while for .rpm suffix it is, with:
>  rpm -i hsf*.rpm
>>>
> Support for Conexant chips hosted on High Definition Audio cards may
> require
> installation of additional packages, one of the alsa-driver-linuxant
> packages
> on  http://www.linuxant.com/alsa-driver/  At the same time download the
> alsa-driver-1.0.17-1.patch , in case it prove to be later needed.
> During the
> hsfmodem install, there will be a message if there is necessary
> installation of
> alsa-driver-linuxant
>>>
> The installation command for a .deb suffic packages is, with root/adm
> permission:
>  sudo alsa* -i hsf*.deb
> while for .rpm suffix it is, with:
>  rpm -i hsf*.rpm
>>>
> There may a message that "Dependencies" are not satisfied.  In this
> case the Ubuntu/Debian packages to be installed are linux-libc-dev &
> libc6-dev. Package
> names may be different for other Linuxes. If not on your install CD, these
> packages can be searched for at http://packages.ubuntu.com.  After
> download,
> they can be coinstalled with:
>       sudo dpkg -i li*.deb
> Again try the alsa-driver-linuxant
>>>
> There may be a message that the patch must be applied.  In this case
> get the
> ftp://ftp.alsa-project.org/pub/driver/alsa-driver-1.0.17.tar.bz2
> Under Linux, this package is unpacked with:
> $ tar jxf alsa*.tar.bz2
> Next the patch is applied with:
> $ patch -p0 < alsa-driver-1.0.17-1.patch
>>>
> See http://linmodems.technion.ac.il/bigarch/archive-eighth/msg00838.html
> for details on compiling and installing replacement snd-hda-intel + its
> dependent drivers.
> After the installation is completed, rerun the hsfmodem installation.
> Reboot and try to detect the modem with Root permission:
>       sudo wvdialconf  /etc/wvdial.conf
>>>
>  From  http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php
>  download hsfmodem-7.80.02.02full_k2.6.27_11_generic_ubuntu_i386.deb.zip
>  Under Linux unpack with:
>  $ unzip hsfmodem*.zip
>  Then install with:
>  $ sudo dpkg -i hsfmodem*.deb
>  Subsequently, the modem should be found with
>  $ sudo wvdialconf /etc/wvdial.conf
>  Edit in your personal information with:
>  $ sudo gedit /etc/wvdial.conf
>  and try dialing out with:
>  $ sudo wvdial.
>  See DOCs/Testing.txt  for details.
>>>
>  Read DOCs/Conexant.txt
>>>
> Writing DOCs/Conexant.txt
>>>
>>>
>  Completed candidate modem analyses.
>>>
>  The base of the UDEV device file system is: /dev/.udev
>>>
>  Versions adequately match for the compiler installed: 4.3.2
>            and the compiler used in kernel assembly: 4.3.3
>>>
>>>
>>>
>  Minimal compiling resources appear complete:
>  make utility - /usr/bin/make
>  Compiler version 4.3
>  linuc_headers base folder /lib/modules/2.6.27-11-generic/build
>>>
>  However some compilations and executable functions may need
> additional files,
>  in the FileNames.h (so called kernel "h"eaders) collection installed
> in  /usr/include/ .
>  For martian_modem, additional required packages are needed. The also
> required headers of package libc6 are commonly installed by default.
>  Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev
> packages, for kernels 2.6.24 and later versions.
>  In not included on your install CD, search for them at
> http://packages.ubuntu.com
>  or comparable Repository for other Linux distros.
>  When compiling ALSA drivers, the utility "patch" will also be needed.
>>>
>>>
>>>
>>>
> If a driver compilation fails, with message including some lack of
> some FileName.h (stdio.h for example), then
> Some additional kernel-header files need installation to /usr/include.
> The minimal additional packages are libc6-dev
> and any of its dependents, under Ubuntu linux-libc-dev
>>>
> If an alternate ethernet connection is available,
> $  apt-get update
> $  apt-get -s install linux-kernel-devel
> will install needed packages.
> For Debian/Ubuntu related distributions, run the following command to
> display the needed package list:
>>>
> Otherwise packages have to be found through http://packages.ubuntu.com
> Once downloaded and transferred into a Linux partition,
> they can be installed alltogether with:
> $ sudo dpkg -i *.deb
>>>
>>>
> Checking pppd properties:
>       -rwsr-xr-- 1 root dip 277352 2009-02-20 18:25 /usr/sbin/pppd
>>>
> In case of an "error 17" "serial loopback" problem, see:
>   http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
>>>
> To enable dialout without Root permission do:
>       $ su - root  (not for Ubuntu)
>       sudo chmod a+x /usr/sbin/pppd
> or under Ubuntu related Linuxes
>       sudo chmod a+x /usr/sbin/pppd
>>>
> Checking settings of:   /etc/ppp/options
> asyncmap 0
> noauth
> crtscts
> lock
> hide-password
> modem
> proxyarp
> lcp-echo-interval 30
> lcp-echo-failure 4
> noipx
>>>
> In case of a message like:
>  Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
> see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
>>>
> Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
> virbr0 vmnet1 vmnet8 wlan0 wmaster0
> Which can interfere with Browser naviagation.
>>>
>  Don't worry about the following, it is for experts should trouble
> shooting be necessary.
> ==========================================================
>>>
>  Checking for modem support lines:
>  --------------------------------------
>    /device/modem symbolic link:
> slmodemd created symbolic link /dev/ttySL0:
>    Within /etc/udev/ files:
>>>
>    Within /etc/modprobe.conf files:
> /etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
> /etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
> /etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in
> order to blacklist unwanted modem drivers
> /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
> /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
>    Within any ancient /etc/devfs files:
>>>
>    Within ancient kernel 2.4.n /etc/module.conf files:
>>>
> - --------- end modem support lines --------
>>>
>>>
>>>
>
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.4.9 (GNU/Linux)
> Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
>
> iEYEARECAAYFAkn4bPUACgkQyVbnRmfVcsyXUgCgsxM6FB8o8J2cEptj3C/v6VAa
> p0IAn3B5IQhHw9MfqEcpvcz2wdd2TRt6
> =Y7RE
> -----END PGP SIGNATURE-----
>
>
>  Only plain text email is forwarded by the  Discuss@xxxxxxxxxxxxx List Server,
>  as HTML can contain viruses. Use as the email Subject Line:
>           YourName, YourCountry  kernel 2.6.27-11-generic
>  With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
>  YourCountry will enable Country specific guidance. Linux experts in YourCountry
>  can be found through: http://www.linux.org/groups/index.html.
> They will know your Country's modem code, which may be essential for dialup service.
> Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
>  So in a day, also check the Archived responses at http://www.linmodems.org
> --------------------------  System information ----------------------------
> CPU=i686,
> Linux version 2.6.27-11-generic (buildd@vernadsky) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Wed Apr 1 20:57:48 UTC 2009
>  scanModem update of:  2009_04_28
>
>  There are no blacklisted modem drivers in /etc/modprobe*  files
>  Potentially useful modem drivers now loaded are:
>  snd_atiixp_modem snd_via82xx_modem snd_intel8x0m     snd_hda_intel
>
> Attached USB devices are:
>  ID 046d:0992 Logitech, Inc. QuickCam Communicate Deluxe
>  ID 13fd:1040 Initio Corporation
>  ID 413c:a005 Dell Computer Corp. Internal 2.0 Hub
>  ID 1241:1177 Belkin F8E842-DL Mouse
>  ID 0b97:7762 O2 Micro, Inc. Oz776 SmartCard Reader
>  ID 0b97:7761 O2 Micro, Inc. Oz776 1.1 Hub
> If a cellphone is not detected, see http://ubuntuforums.org/archive/index.php/t-878554.html
>
> If a USB modem or cellphone is attached and was not detected, please
> provide available information in your request to discuss@xxxxxxxxxxxxx
>
> For candidate card in slot 00:1b.0, firmware information and bootup diagnostics are:
>  PCI slot       PCI ID          SubsystemID     Name
>  ----------     ---------       ---------       --------------
>  00:1b.0        8086:27d8       1028:01c8       Audio device: Intel Corporation 82801G
>
>  Modem interrupt assignment and sharing:
>  21:     336439          0   IO-APIC-fasteoi   uhci_hcd:usb2, HDA Intel
>  --- Bootup diagnostics for card in PCI slot 00:1b.0 ----
> [    0.553255] PCI: 0000:00:1b.0 reg 10 64bit mmio: [efffc000, efffffff]
> [    0.553255] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
> [    0.553255] pci 0000:00:1b.0: PME# disabled
> [   13.573944] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
> [   13.573967] HDA Intel 0000:00:1b.0: setting latency timer to 64
>
>  The PCI slot 00:1b.0 of the modem card may be disabled early in
>  a bootup process,  but then enabled later. If modem drivers load
>  but the  modem is not responsive, read DOCs/Bootup.txt about possible fixes.
>  Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
>  if help is needed.
>
>
>
> ===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
> The ALSA packages provide audio support and also drivers for some modems.
> ALSA diagnostics are written during bootup to /proc/asound/ folders.
>
> The ALSA verion is 1.0.17
> The modem cards detected by "aplay -l"  are: None
>
>
> The /proc/asound/pcm file reports:
> -----------------------
> 01-00: USB Audio : USB Audio : capture 1
> 00-01: STAC92xx Digital : STAC92xx Digital : playback 1
> 00-00: STAC92xx Analog : STAC92xx Analog : playback 1 : capture 1
>
> about /proc/asound/cards:
> ------------------------
>  0 [Intel          ]: HDA-Intel - HDA Intel
>                      HDA Intel at 0xefffc000 irq 21
>  1 [U0x46d0x992    ]: USB-Audio - USB Device 0x46d:0x992
>                      USB Device 0x46d:0x992 at usb-0000:00:1d.7-4, high speed
>
>  PCI slot 00:1b.0 has a High Definition Audio Card
>  The drivers are in the kernel modules tree at:
>  /lib/modules/2.6.27-7-generic/kernel/sound/pci/hda/snd-hda-intel.ko
> /lib/modules/2.6.27-11-generic/kernel/sound/pci/hda/snd-hda-intel.ko
> /lib/modules/2.6.28-11-generic/kernel/sound/pci/hda/snd-hda-intel.ko
>  The modem codec file for the HDA card is: /proc/asound/card0/codec#1
> --------------------------------------------------------
> Codec: Conexant ID 2bfa
> Address: 1
> Vendor Id: 0x14f12bfa
> Subsystem Id: 0x14f100c3
> Revision Id: 0x90000
> Modem Function Group: 0x2
>
>  The audio card hosts a softmodem chip:  0x14f12bfa
>
>  14f1 is the Conexant Vendor ID, and 0x14f12bfa a softmodem chipset.
>  Get a hsfmodem package through http://www.linuxant.com
>
> If not a Conexant modem, the driver hsfmodem-drivers with its dependent drivers:
>
> ----------
> provide audio + modem support with the modem chip residing on the subsystem.
> Any particular card can host any one of several soft modem chips.
>
> === Finished firmware and bootup diagnostics, next deducing cogent software. ===
>
> Predictive  diagnostics for card in bus 00:1b.0:
>        Modem chipset  detected on
> NAME="Audio device: Intel Corporation 82801G "
> CLASS=0403
> PCIDEV=8086:27d8
> SUBSYS=1028:01c8
> IRQ=21
> HDA=8086:27d8
> SOFT=8086:27d8.HDA
> CHIP=0x14f12bfa
> IDENT=hsfmodem
> Driver=hsfmodem-drivers
>
>  For candidate modem in:  00:1b.0
>   0403 Audio device: Intel Corporation 82801G
>      Primary device ID:  8086:27d8
>    Subsystem PCI_id  1028:01c8
>    Softmodem codec or chipset from diagnostics: 0x14f12bfa
>                               from    Archives:
>                        The HDA card softmodem chip is 0x14f12bfa
>
>
> Support type needed or chipset: hsfmodem
>
>
> Writing DOCs/Intel.txt
>
> For owners of a Dell PCs with Conexant HSF modems, a driver source package with full speed enabled is available, but requires driver compiling. Read DOCs/Conexant.txt
>
>
> Start at http://www.linuxant.com/drivers/hsf/downloads-license.php to find the
> hsfmodem package matching your System. For several Linux distros, there are
> precompiled drivers matched to specific kernels. These have within the FileName,
> your KernelVersion:     2.6.27_11_generic
> They can be found through http://www.linuxant.com/drivers/hsf/full/downloads.php
> A more precise location may be given a few paragraphs below.
> If an EXACT Match with your your KernelVersion is not found, one of the
> "Generic packages with source" near the bottom of the page must be used.
> Downloaded packages must be moved into the Linux partition (home folder is OK)
> and unzipped with:
>        unzip hsf*.zip
> The installation command for a .deb suffic packages is, with root/adm permission:
>  sudo dpkg -i hsf*.deb
> while for .rpm suffix it is, with:
>  rpm -i hsf*.rpm
>
> Support for Conexant chips hosted on High Definition Audio cards may require
> installation of additional packages, one of the alsa-driver-linuxant packages
> on  http://www.linuxant.com/alsa-driver/  At the same time download the
> alsa-driver-1.0.17-1.patch , in case it prove to be later needed. During the
> hsfmodem install, there will be a message if there is necessary installation of
> alsa-driver-linuxant
>
> The installation command for a .deb suffic packages is, with root/adm permission:
>  sudo alsa* -i hsf*.deb
> while for .rpm suffix it is, with:
>  rpm -i hsf*.rpm
>
> There may a message that "Dependencies" are not satisfied.  In this case the Ubuntu/Debian packages to be installed are linux-libc-dev & libc6-dev. Package
> names may be different for other Linuxes. If not on your install CD, these
> packages can be searched for at http://packages.ubuntu.com.  After download,
> they can be coinstalled with:
>        sudo dpkg -i li*.deb
> Again try the alsa-driver-linuxant
>
> There may be a message that the patch must be applied.  In this case get the
> ftp://ftp.alsa-project.org/pub/driver/alsa-driver-1.0.17.tar.bz2
> Under Linux, this package is unpacked with:
> $ tar jxf alsa*.tar.bz2
> Next the patch is applied with:
> $ patch -p0 < alsa-driver-1.0.17-1.patch
>
> See http://linmodems.technion.ac.il/bigarch/archive-eighth/msg00838.html
> for details on compiling and installing replacement snd-hda-intel + its
> dependent drivers.
> After the installation is completed, rerun the hsfmodem installation.
> Reboot and try to detect the modem with Root permission:
>        sudo wvdialconf  /etc/wvdial.conf
>
>  From  http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php
>  download hsfmodem-7.80.02.02full_k2.6.27_11_generic_ubuntu_i386.deb.zip
>  Under Linux unpack with:
>  $ unzip hsfmodem*.zip
>  Then install with:
>  $ sudo dpkg -i hsfmodem*.deb
>  Subsequently, the modem should be found with
>  $ sudo wvdialconf /etc/wvdial.conf
>  Edit in your personal information with:
>  $ sudo gedit /etc/wvdial.conf
>  and try dialing out with:
>  $ sudo wvdial.
>  See DOCs/Testing.txt  for details.
>
>  Read DOCs/Conexant.txt
>
> Writing DOCs/Conexant.txt
>
>
>  Completed candidate modem analyses.
>
>  The base of the UDEV device file system is: /dev/.udev
>
>  Versions adequately match for the compiler installed: 4.3.2
>             and the compiler used in kernel assembly: 4.3.3
>
>
>
>  Minimal compiling resources appear complete:
>   make utility - /usr/bin/make
>   Compiler version 4.3
>   linuc_headers base folder /lib/modules/2.6.27-11-generic/build
>
>  However some compilations and executable functions may need additional files,
>  in the FileNames.h (so called kernel "h"eaders) collection installed in  /usr/include/ .
>  For martian_modem, additional required packages are needed. The also required headers of package libc6 are commonly installed by default.
>  Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
>  In not included on your install CD, search for them at http://packages.ubuntu.com
>  or comparable Repository for other Linux distros.
>  When compiling ALSA drivers, the utility "patch" will also be needed.
>
>
>
>
> If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
> Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
> and any of its dependents, under Ubuntu linux-libc-dev
>
> If an alternate ethernet connection is available,
> $  apt-get update
> $  apt-get -s install linux-kernel-devel
> will install needed packages.
> For Debian/Ubuntu related distributions, run the following command to display the needed package list:
>
> Otherwise packages have to be found through http://packages.ubuntu.com
> Once downloaded and transferred into a Linux partition,
> they can be installed alltogether with:
> $ sudo dpkg -i *.deb
>
>
> Checking pppd properties:
>        -rwsr-xr-- 1 root dip 277352 2009-02-20 18:25 /usr/sbin/pppd
>
> In case of an "error 17" "serial loopback" problem, see:
>    http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
>
> To enable dialout without Root permission do:
>        $ su - root  (not for Ubuntu)
>        sudo chmod a+x /usr/sbin/pppd
> or under Ubuntu related Linuxes
>        sudo chmod a+x /usr/sbin/pppd
>
> Checking settings of:   /etc/ppp/options
> asyncmap 0
> noauth
> crtscts
> lock
> hide-password
> modem
> proxyarp
> lcp-echo-interval 30
> lcp-echo-failure 4
> noipx
>
> In case of a message like:
>   Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
> see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
>
> Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 virbr0 vmnet1 vmnet8 wlan0 wmaster0
> Which can interfere with Browser naviagation.
>
>  Don't worry about the following, it is for experts should trouble shooting be necessary.
> ==========================================================
>
>  Checking for modem support lines:
>  --------------------------------------
>     /device/modem symbolic link:
> slmodemd created symbolic link /dev/ttySL0:
>     Within /etc/udev/ files:
>
>     Within /etc/modprobe.conf files:
> /etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
> /etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
> /etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order to blacklist unwanted modem drivers
> /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
> /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
>     Within any ancient /etc/devfs files:
>
>     Within ancient kernel 2.4.n /etc/module.conf files:
>
> --------- end modem support lines --------
>
>
>


[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux