Tour, Re: ---- Apr 26 08:56:57 tourcom-laptop kernel: [ 52.864601] Intel537: disagrees about version of symbol struct_module Apr 26 08:56:57 tourcom-laptop kernel: [ 52.911669] Intel537: disagrees about version of symbol struct_module ---------- there seems to be an Intel537 driver on your system from some previous attempt, which may be interfering. Please uninstall/delete this driver from your System. Then retry. MarvS 2009/4/25 Patompong Kumdang <u500910052@xxxxxx>: > Hello, > I heve sent this log file to you. > > Thank you. > > Tour. > > > > > >> Tour, >> >> Could you try to make a log file of your session >> >> $ sudo wvdial 2>&1 | tee wvdial.out >> >> send wvdial.out to us(list) >> >> and attach output of >> $ sudo tail -f var/log/messages >> >> Report back presently. >> >> Regards, >> >> Antonio >> >> 2009/4/25 Patompong Kumdang <u500910052@xxxxxx>: >>> Antonio, >>> >>> I don't know about how to choose driver to in stall, >>> I follow the step that Marv suggest. >>> My username and password is a free account in my country.(it's safe ) >>> In windows I don't use a special command. >>> Now, I guess my modem can't sent signal to server. >>> Do you listen the file that I sent to you. >> >> Yes, I get typically the same sound when I dialup too! >>> >>> Thank you very much :) >>> >>> >>> Tour. >>> >>> >>>> TouR, Marv >>>> >>>> I don't know if this will make a difference, but since your using >>>> precompiled SLMODEMD with ALSA support, your alsa version is 1.0.19 >>>> and there does not exist a 1.0.19 SLMODEMD.gcc4.3_alsa1.0.19.tar.gz. >>>> Marv will it make a difference if he needs a gcc4.3_alsa1.0.19 >>>> SLMODEMD? He is having difficulties getting connected to internet. >>>> This email sent to Marv, and Jacques not to list so your username and >>>> password will be safe! >>>> >>>> TouR, >>>> my wvdial.conf file looks this way: >>>> [olivares@localhost ~]$ cat /etc/wvdial.conf >>>> >>>> [Dialer Defaults] >>>> Init2 = ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=90 >>>> Modem Type = Analog Modem >>>> Phone = 7072000 >>>> ISDN = 0 >>>> Username = myusername >>>> Init1 = ATZ >>>> Password = ************ >>>> Modem = /dev/ttySL0 >>>> Baud = 460800 >>>> Carrier Check = No >>>> Stupid Mode = 1 >>>> >>>> A SLMODEMD with alsa 1.0.19 might be his best bet? Don't know if this >>>> makes a difference, but why not ask? >>>> >>>> http://linmodems.technion.ac.il/packages/smartlink/ >>>> >>>> Here's your wvdial.con >>>> this is my wvdial.conf file >>>> ------------------------------------- >>>> [Dialer Defaults] >>>> Modem = /dev/ttySL0 >>>> Init1 = ATZ >>>> Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >>>> ;Stupid Mode = 1 >>>> Modem Type = Analog Modem >>>> Phone = 1222 >>>> ISDN = 0 >>>> Username = U89$0y)9@xxxxxxxxxxxxx >>>> Carrier Check = no >>>> Password = j4**9c+p >>>> Baud = 460800 >>>> >>>> Jacques, is a username allow characters like ")" in wvdial.conf ? >>>> U89$0y)9@xxxxxxxxxxxxx ? >>>> >>>> I am looking for what your ISP requires, but can't seem to find >>>> anything. >>>> >>>> http://www.tot.co.th/toten/index.php?option=com_content&task=view&id=363&Itemid=1121 >>>> >>>> >>>> TouR >>>> Do you use any special commands or strings to connect via windows? >>>> It is strange that the connection can't seem to get through? >>>> >>>> 2009/4/25 Patompong Kumdang <u500910052@xxxxxx>: >>>>> >>>>> Antonio, >>>>> >>>>> Thanks. for your help. :) >>>>> >>>>> I try to modify wvdial.conf, But it has the same problem. >>>>> I attach file that contain the sound that I hear when connect >>>>> using ubuntu (001.wav) and using windows (003.wav)(windows can >>>>> connect) >>>>> I guess my modem can't sent information to server? >>>>> >>>>> and this is my log file >>>>> >>>>> >>>>> ---------------------------------------------------------- >>>>> Baud = 57,600 , +MS=34 >>>>> ---------------------------------------------------------- >>>>> --> WvDial: Internet dialer version 1.60 >>>>> --> Cannot get information for serial port. >>>>> --> Initializing modem. >>>>> --> Sending: ATZ >>>>> ATZ >>>>> OK >>>>> --> Sending: ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=34 >>>>> ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=34 >>>>> OK >>>>> --> Modem initialized. >>>>> --> Sending: ATDT1222 >>>>> --> Waiting for carrier. >>>>> ATDT1222 >>>>> NO CARRIER >>>>> --> No Carrier! Trying again. >>>>> --> Sending: ATDT1222 >>>>> --> Waiting for carrier. >>>>> ATDT1222 >>>>> --> Timed out while dialing. Trying again. >>>>> --> Sending: ATDT1222 >>>>> --> Waiting for carrier. >>>>> NO CARRIER >>>>> ATDT1222 >>>>> --> No Carrier! Trying again. >>>>> --> Sending: ATDT1222 >>>>> --> Waiting for carrier. >>>>> NO CARRIER >>>>> ATDT1222 >>>>> --> No Carrier! Trying again. >>>>> --> Sending: ATDT1222 >>>>> --> Waiting for carrier. >>>>> NO CARRIER >>>>> ATDT1222 >>>>> --> No Carrier! Trying again. >>>>> --> Sending: ATDT1222 >>>>> --> Waiting for carrier. >>>>> NO CARRIER >>>>> >>>>> >>>>> ------------------------------------------------------------------ >>>>> Baud = 57,600 ,+MS=90 >>>>> ------------------------------------------------------------------ >>>>> --> WvDial: Internet dialer version 1.60 >>>>> --> Cannot get information for serial port. >>>>> --> Initializing modem. >>>>> --> Sending: ATZ >>>>> ATZ >>>>> OK >>>>> --> Sending: ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=90 >>>>> ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=90 >>>>> OK >>>>> --> Modem initialized. >>>>> --> Sending: ATDT1222 >>>>> --> Waiting for carrier. >>>>> ATDT1222 >>>>> NO CARRIER >>>>> --> No Carrier! Trying again. >>>>> --> Sending: ATDT1222 >>>>> --> Waiting for carrier. >>>>> ATDT1222 >>>>> >>>>> >>>>> ------------------------------------------------ >>>>> Baud = 115,200 , +MS=90 >>>>> ------------------------------------------------ >>>>> --> WvDial: Internet dialer version 1.60 >>>>> --> Cannot get information for serial port. >>>>> --> Initializing modem. >>>>> --> Sending: ATZ >>>>> ATZ >>>>> OK >>>>> --> Sending: ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=90 >>>>> ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=90 >>>>> OK >>>>> --> Modem initialized. >>>>> --> Sending: ATDT1222 >>>>> --> Waiting for carrier. >>>>> ATDT1222 >>>>> NO CARRIER >>>>> --> No Carrier! Trying again. >>>>> --> Sending: ATDT1222 >>>>> --> Waiting for carrier. >>>>> ATDT1222 >>>>> >>>>> >>>>> >>>>> --------------------------------------------------------- >>>>> Baud = 115,200 , +MS=34 >>>>> --------------------------------------------------------- >>>>> --> WvDial: Internet dialer version 1.60 >>>>> --> Cannot get information for serial port. >>>>> --> Initializing modem. >>>>> --> Sending: ATZ >>>>> ATZ >>>>> OK >>>>> --> Sending: ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=34 >>>>> ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=34 >>>>> OK >>>>> --> Modem initialized. >>>>> --> Sending: ATDT1222 >>>>> --> Waiting for carrier. >>>>> ATDT1222 >>>>> NO CARRIER >>>>> --> No Carrier! Trying again. >>>>> --> Sending: ATDT1222 >>>>> --> Waiting for carrier. >>>>> ATDT1222 >>>>> >>>>> >>>>> >>>>> >>>>> ------------------------------------------------------------------ >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>>> Tour, >>>>>> >>>>>> Try to modify wvdial.conf from >>>>>> [Dialer Defaults] >>>>>> Modem = /dev/ttySL0 >>>>>> Init1 = ATZ >>>>>> Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >>>>>> ;Stupid Mode = 1 >>>>>> Modem Type = Analog Modem >>>>>> Phone = 1222 >>>>>> ISDN = 0 >>>>>> Username = U89$0y)9@xxxxxxxxxxxxx >>>>>> Carrier Check = no >>>>>> Password = ********** <--- change this to ***** be careful with >>>>>> passwords others can take advantage when posting to list >>>>>> Baud = 460800 >>>>>> to >>>>>> [Dialer Defaults] >>>>>> Modem = /dev/ttySL0 >>>>>> Init1 = ATZ >>>>>> Init2 = ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=90 <--- add X3 option to >>>>>> skip dialtone checking, and add +MS=90 you may try +MS=34 if +MS=90 >>>>>> does not help you get connected >>>>>> Modem Type = Analog Modem >>>>>> Phone = 1222 >>>>>> Baud = 460800 <---- you can also try lower bauds like 115,200 or >>>>>> 57,600 in case it is needed. >>>>>> ISDN = 0 >>>>>> Username = U89$0y)9@xxxxxxxxxxxxx >>>>>> Password = ********** >>>>>> Carrier Check = no >>>>>> Stupid Mode = 1 <--- remove the ";", it might help get you connected >>>>>> >>>>>> Try that and report back. Also, if for any reason you do not get >>>>>> connected, try reading the DOCs/wvdial.txt file. In that file it >>>>>> summarizes more of what I am recommending here. Also try to create a >>>>>> file that you may send should you fail to get connected. >>>>>> >>>>>> ## To make a logfile wvdial.out >>>>>> $ sudo wvdial 2>&1 | tee wvdial.out >>>>>> >>>>>> and attach wvdial.out to list. You may also read up on Jacques' >>>>>> post-install troubleshooting guide/howto : >>>>>> http://linmodems.technion.ac.il/post-install.html >>>>>> >>>>>> Regards, >>>>>> >>>>>> Antonio >>>>>> >>>>>> >>>>>> >>>>>> 2009/4/24 Patompong Kumdang <u500910052@xxxxxx>: >>>>>>> Hello, >>>>>>> I'm Tour, Thailand >>>>>>> >>>>>>> I cannot connect to internet by using my internal modem. >>>>>>> I use ubuntu 8.1 kernel 2.6.27-10-generic >>>>>>> when I connect, I can hear the dial tone like as connect by windows, >>>>>>> But the sound that I hear not the same, It stop sound later. >>>>>>> >>>>>>> (I guss you know that I tell, my english not very well) >>>>>>> >>>>>>> >>>>>>> this is my wvdial.conf >>>>>>> ------------------------------------------- >>>>>>> root@tourcom-laptop:/home/tourcom# wvdialconf /etc/wvdial.conf >>>>>>> Editing `/etc/wvdial.conf'. >>>>>>> >>>>>>> Scanning your serial ports for a modem. >>>>>>> >>>>>>> Modem Port Scan<*1>: S0 S1 S2 S3 >>>>>>> WvModem<*1>: Cannot get information for serial port. >>>>>>> ttySL0<*1>: ATQ0 V1 E1 -- OK >>>>>>> ttySL0<*1>: ATQ0 V1 E1 Z -- OK >>>>>>> ttySL0<*1>: ATQ0 V1 E1 S0=0 -- OK >>>>>>> ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK >>>>>>> ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK >>>>>>> ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK >>>>>>> ttySL0<*1>: Modem Identifier: ATI -- SmartLink Soft Modem >>>>>>> ttySL0<*1>: Speed 4800: AT -- OK >>>>>>> ttySL0<*1>: Speed 9600: AT -- OK >>>>>>> ttySL0<*1>: Speed 19200: AT -- OK >>>>>>> ttySL0<*1>: Speed 38400: AT -- OK >>>>>>> ttySL0<*1>: Speed 57600: AT -- OK >>>>>>> ttySL0<*1>: Speed 115200: AT -- OK >>>>>>> ttySL0<*1>: Speed 230400: AT -- OK >>>>>>> ttySL0<*1>: Speed 460800: AT -- OK >>>>>>> ttySL0<*1>: Max speed is 460800; that should be safe. >>>>>>> ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK >>>>>>> >>>>>>> Found a modem on /dev/ttySL0. >>>>>>> Modem configuration written to /etc/wvdial.conf. >>>>>>> ttySL0<Info>: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0" >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> this is the script when I connect >>>>>>> ---------------------------------------------------------- >>>>>>> Script started on Sat 25 Apr 2009 09:48:30 AM ICT >>>>>>> ]0;root@tourcom-laptop: /home/tourcom >>>>>>> root@tourcom-laptop:/home/tourcom# >>>>>>> wvdial >>>>>>> --> WvDial: Internet dialer version 1.60 >>>>>>> --> Cannot get information for serial port. >>>>>>> --> Initializing modem. >>>>>>> --> Sending: ATZ >>>>>>> ATZ >>>>>>> OK >>>>>>> --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >>>>>>> ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >>>>>>> OK >>>>>>> --> Modem initialized. >>>>>>> --> Sending: ATDT1222 >>>>>>> --> Waiting for carrier. >>>>>>> ATDT1222 >>>>>>> NO CARRIER >>>>>>> --> No Carrier! Trying again. >>>>>>> --> Sending: ATDT1222 >>>>>>> --> Waiting for carrier. >>>>>>> ATDT1222 >>>>>>> ^CCaught signal 2: Attempting to exit gracefully... >>>>>>> --> Disconnecting at Sat Apr 25 09:49:42 2009 >>>>>>> ]0;root@tourcom-laptop: /home/tourcom >>>>>>> root@tourcom-laptop:/home/tourcom# >>>>>>> exit >>>>>>> exit >>>>>>> >>>>>>> Script done on Sat 25 Apr 2009 09:49:45 AM ICT >>>>>>> >>>>>>> >>>>>>> >>>>>>> this is my wvdial.conf file >>>>>>> ------------------------------------- >>>>>>> [Dialer Defaults] >>>>>>> Modem = /dev/ttySL0 >>>>>>> Init1 = ATZ >>>>>>> Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >>>>>>> ;Stupid Mode = 1 >>>>>>> Modem Type = Analog Modem >>>>>>> Phone = 1222 >>>>>>> ISDN = 0 >>>>>>> Username = U89$0y)9@xxxxxxxxxxxxx >>>>>>> Carrier Check = no >>>>>>> Password = j4**9c+p >>>>>>> Baud = 460800 >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>> >>>>>> <div><br></div> >>>>>> >>>>>> >>>>> >>>> >>>> <div><br></div> >>>> >>>> >>> >>> >>> >> >> <div><br></div> >> >> >
