Re: Please help me to set up my modem

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Tour

Download from http://linmodems.technion.ac.il/packages/smartlink/
 the package SLMODEMD.gcc4.3.tar.gz having a compiled slmodemd. Unpack
under Linux with:
       $ tar zxf SLMODEMD.gcc4.3.tar.gz
 and read instructions therein.  After the slmodemd installation do
for information:
$ slmodemd --help
$ slmodemd --countrylist

Briefly, the modem is setup with command:
       sudo slmodemd -c THAILAND  --alsa hw:0,6
 reporting dynamic creation of ports:
       /dev/ttySL0 --> /dev/pts/N   , with N some number
 Read DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow through
guidance.

2009/4/23 Patompong Kumdang <u500910052@xxxxxx>:
> Hello,
> I'am Tour , Thailand
> This is my first e-mail to you.
> I'm not very well in english. please help with a simple word.
> I have agere HDA modem system on Ubuntu 8.10.
> This is my scanModem report.
>
>
> --------------------------  System information ----------------------------
> CPU=i686,
> Linux version 2.6.27-10-generic (buildd@vernadsky) (gcc version 4.3.2
> (Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Fri Nov 21 12:00:22 UTC 2008
>  scanModem update of:  2009_04_11
> The modem symbolic link is /dev/modem -> ttySL0
>  There are no blacklisted modem drivers in /etc/modprobe*  files
>  Potentially useful modem drivers now loaded are:
>  snd_atiixp_modem snd_via82xx_modem snd_intel8x0m     snd_hda_intel
>
> Attached USB devices are:
>  ID 0402:5602 ALi Corp. Video Camera Controller
>  ID 0ac8:303b Z-Star Microelectronics Corp. ZC0303 WebCam
>  ID 04f3:0210 Elan Microelectronics Corp. AM-400 Hama Optical Mouse
>  ID 04f2:0111 Chicony Electronics Co., Ltd KU-9908 Keyboard
>  ID 058f:9254 Alcor Micro Corp. Hub
> If a cellphone is not detected, see
> http://ubuntuforums.org/archive/index.php/t-878554.html
>
> If a USB modem or cellphone is attached and was not detected, please
> provide available information in your request to discuss@xxxxxxxxxxxxx
>
> For candidate card in slot 00:1b.0, firmware information and bootup
> diagnostics are:
>  PCI slot       PCI ID          SubsystemID     Name
>  ----------     ---------       ---------       --------------
>  00:1b.0        8086:27d8       1025:0110       Audio device: Intel Corporation 82801G
>
>  Modem interrupt assignment and sharing:
>  22:       1542   IO-APIC-fasteoi   HDA Intel
>  --- Bootup diagnostics for card in PCI slot 00:1b.0 ----
> [    1.635160] PCI: 0000:00:1b.0 reg 10 64bit mmio: [d0340000, d0343fff]
> [    1.635215] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
> [    1.635283] pci 0000:00:1b.0: PME# disabled
> [    1.661074] pci 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
> [   20.996251] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) ->
> IRQ 22
> [   20.996376] HDA Intel 0000:00:1b.0: setting latency timer to 64
>
>  The PCI slot 00:1b.0 of the modem card may be disabled early in
>  a bootup process,  but then enabled later. If modem drivers load
>  but the  modem is not responsive, read DOCs/Bootup.txt about possible fixes.
>  Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
>  if help is needed.
>
>
>
> ===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
> The ALSA packages provide audio support and also drivers for some modems.
> ALSA diagnostics are written during bootup to /proc/asound/ folders.
>
> The ALSA verion is 1.0.19
> The modem cards detected by "aplay -l"  are:
> card 0: Intel [HDA Intel], device 6: Si3054 Modem [Si3054 Modem]
>
> The /proc/asound/pcm file reports:
> -----------------------
> 00-00: ALC883 Analog : ALC883 Analog : playback 1 : capture 1
> 00-01: ALC883 Digital : ALC883 Digital : playback 1
> 00-02: ALC883 Analog : ALC883 Analog : capture 1
> 00-06: Si3054 Modem : Si3054 Modem : playback 1 : capture 1
>
> about /proc/asound/cards:
> ------------------------
>  0 [Intel          ]: HDA-Intel - HDA Intel
>                      HDA Intel at 0xd0340000 irq 22
>
>  PCI slot 00:1b.0 has a High Definition Audio Card
>  The drivers are in the kernel modules tree at:
>  /lib/modules/2.6.27-10-generic/kernel/sound/pci/hda/snd-hda-intel.ko
> /lib/modules/2.6.27-11-generic/kernel/sound/pci/hda/snd-hda-intel.ko
> /lib/modules/2.6.27-11-server/kernel/sound/pci/hda/snd-hda-intel.ko
>  The modem codec file for the HDA card is: /proc/asound/card0/codec#1
> --------------------------------------------------------
> Codec: LSI Si3054
> Address: 1
> Vendor Id: 0x11c13026
> Subsystem Id: 0x10250110
> Revision Id: 0x100700
> Modem Function Group: 0x1
>
>  The audio card hosts a softmodem chip:  0x11c13026
>
> The softmodem chip 0x11c13026 is in principle supported by the COMM
> support of slmodemd
> and the joint snd-hda-intel audio+modem driver, begun with ALSA version
> 1.0.13.
> For HDA cards with ALC883 chips, an upgrade to ALSA verions 1.0.15 way be
> necessary. Instructions for Upgrading snd-hda-intel and its dependent
> driver set are at:
> http://linmodems.technion.ac.il/bigarch/archive-eighth/msg00838.html
>
> If not a Conexant modem, the driver snd-hda-intel with its dependent drivers:
> snd_hda_intel          33736  3
> snd_hda_codec          77568  3
> snd_hda_codec_si3054,snd_hda_codec_realtek,snd_hda_intel
> snd_pcm                83844  8
> snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_ac97_codec,snd_hda_codec_si3054,snd_hda_intel,snd_hda_codec,snd_pcm_oss
> snd                    67492  24
> snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_ac97_codec,snd_hda_codec_si3054,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_dummy,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
> snd_page_alloc         16776  5
> snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_hda_intel,snd_pcm
> ----------
> provide audio + modem support with the modem chip residing on the subsystem.
> Any particular card can host any one of several soft modem chips.
>
> === Finished firmware and bootup diagnostics, next deducing cogent
> software. ===
>
> Predictive  diagnostics for card in bus 00:1b.0:
>        Modem chipset  detected on
> NAME="Audio device: Intel Corporation 82801G "
> CLASS=0403
> PCIDEV=8086:27d8
> SUBSYS=1025:0110
> IRQ=22
> HDA=8086:27d8
> SOFT=8086:27d8.HDA
> CHIP=0x11c13026
> IDENT=slmodemd
> SLMODEMD_DEVICE=hw:0,6
> Driver=snd-hda-intel
>
>  For candidate modem in:  00:1b.0
>   0403 Audio device: Intel Corporation 82801G
>      Primary device ID:  8086:27d8
>    Subsystem PCI_id  1025:0110
>    Softmodem codec or chipset from diagnostics: 0x11c13026
>                               from    Archives:
>                        The HDA card softmodem chip is 0x11c13026
>
>
> Support type needed or chipset: slmodemd supporting the snd-hda-intel
> audio+modem driver
>
>  An ALSA (Advanced Linux Sound Architecture) modem driver:  snd-hda-intel
>  provides Low Level support enabling contact with the modem hardware.
>  For all BUT Conexant chip soft modems (using hsfmodem software)
>  complementary High Level support is through a Smartlink utility:  slmodemd
>
>  Download from http://linmodems.technion.ac.il/packages/smartlink/
>  the package SLMODEMD.gcc4.3.tar.gz having a compiled slmodemd. Unpack
> under Linux with:
>        $ tar zxf SLMODEMD.gcc4.3.tar.gz
>  and read instructions therein. But briefly, the modem is setup with command:
>        sudo slmodemd -c YOUR_COUNTRY --alsa hw:0,6
>  reporting dynamic creation of ports:
>        /dev/ttySL0 --> /dev/pts/N   , with N some number
>  Read DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow through
> guidance.
>
>
> Writing DOCs/Intel.txt
> Writing DOCs/Smartlink.txt
> ============ end Smartlink section =====================
>
>  Completed candidate modem analyses.
>
>  The base of the UDEV device file system is: /dev/.udev
>
>  Versions adequately match for the compiler installed: 4.3.2
>             and the compiler used in kernel assembly: 4.3.2
>
>
>
>  Minimal compiling resources appear complete:
>   make utility - /usr/bin/make
>   Compiler version 4.3
>   linuc_headers base folder /lib/modules/2.6.27-10-generic/build
>
>  However some compilations and executable functions may need additional
> files,
>  in the FileNames.h (so called kernel "h"eaders) collection installed in
> /usr/include/ .
>  For martian_modem, additional required packages are needed. The also
> required headers of package libc6 are commonly installed by default.
>  Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev
> packages, for kernels 2.6.24 and later versions.
>  In not included on your install CD, search for them at
> http://packages.ubuntu.com
>  or comparable Repository for other Linux distros.
>  When compiling ALSA drivers, the utility "patch" will also be needed.
>
>
> Compressed files at: /usr/src/alsa-driver.tar.bz2 /usr/src/aufs.tar.bz2
> /usr/src/linux-wlan-ng.tar.bz2
>
>
> If a driver compilation fails, with message including some lack of some
> FileName.h (stdio.h for example), then
> Some additional kernel-header files need installation to /usr/include. The
> minimal additional packages are libc6-dev
> and any of its dependents, under Ubuntu linux-libc-dev
>
> If an alternate ethernet connection is available,
> $  apt-get update
> $  apt-get -s install linux-kernel-devel
> will install needed packages.
> For Debian/Ubuntu related distributions, run the following command to
> display the needed package list:
>
> Otherwise packages have to be found through http://packages.ubuntu.com
> Once downloaded and transferred into a Linux partition,
> they can be installed alltogether with:
> $ sudo dpkg -i *.deb
>
>
> Checking pppd properties:
>        -rwsr-xr-- 1 root dip 277160 2008-11-21 03:58 /usr/sbin/pppd
>
> In case of an "error 17" "serial loopback" problem, see:
>    http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
>
> To enable dialout without Root permission do:
>        $ su - root  (not for Ubuntu)
>        sudo chmod a+x /usr/sbin/pppd
> or under Ubuntu related Linuxes
>        sudo chmod a+x /usr/sbin/pppd
>
> Checking settings of:   /etc/ppp/options
> 0.0.0.0:10.1.1.1
> defaultroute
> replacedefaultroute
> asyncmap 0
> noauth
> crtscts
> lock
> hide-password
> modem
> proxyarp
> lcp-echo-interval 30
> lcp-echo-failure 4
> noipx
>
> In case of a message like:
>   Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
> see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
>
> Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
> Which can interfere with Browser naviagation.
>
>  Don't worry about the following, it is for experts should trouble
> shooting be necessary.
> ==========================================================
>
> # start/stop the daemon when the USB modem is connected
> KERNEL=="slusb[0-9]*", GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon"
>  Checking for modem support lines:
>  --------------------------------------
>     /device/modem symbolic link:   lrwxrwxrwx 1 root root 6 2009-04-23
> 23:50 /dev/modem -> ttySL0
> slmodemd created symbolic link /dev/ttySL0:
>     Within /etc/udev/ files:
> /etc/udev/rules.d/030_sl-modem-daemon.rules:# start/stop the daemon when
> the USB modem is connected
> /etc/udev/rules.d/030_sl-modem-daemon.rules:KERNEL=="slusb[0-9]*",
> GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon"
> /etc/udev/sl-modem-daemon.rules:# start/stop the daemon when the USB modem
> is connected
> /etc/udev/sl-modem-daemon.rules:KERNEL=="slusb[0-9]*", GROUP="dialout",
> RUN+="/etc/init.d/sl-modem-daemon"
>     Within /etc/modprobe.conf files:
> /etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
> /etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
> /etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to
> blacklist unwanted modem drivers
> /etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
> /etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
> /etc/modprobe.d/sl-modem-daemon.modutils:install slamr modprobe
> --ignore-install ungrab-winmodem ;  modprobe --ignore-install slamr; test
> -e /dev/slamr0 || (/bin/mknod -m 660 /dev/slamr0 c 242 0 2>/dev/null &&
> chgrp dialout /dev/slamr0)
>     Within any ancient /etc/devfs files:
>
>     Within ancient kernel 2.4.n /etc/module.conf files:
>
> --------- end modem support lines --------
>
>
>
>


[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux