Please help me to set up my modem

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello,
I'am Tour , Thailand
This is my first e-mail to you.
I'm not very well in english. please help with a simple word.
I have agere HDA modem system on Ubuntu 8.10.
This is my scanModem report.


--------------------------  System information ----------------------------
CPU=i686,
Linux version 2.6.27-10-generic (buildd@vernadsky) (gcc version 4.3.2
(Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Fri Nov 21 12:00:22 UTC 2008
 scanModem update of:  2009_04_11
The modem symbolic link is /dev/modem -> ttySL0
 There are no blacklisted modem drivers in /etc/modprobe*  files
 Potentially useful modem drivers now loaded are:
  snd_atiixp_modem snd_via82xx_modem snd_intel8x0m     snd_hda_intel

Attached USB devices are:
 ID 0402:5602 ALi Corp. Video Camera Controller
 ID 0ac8:303b Z-Star Microelectronics Corp. ZC0303 WebCam
 ID 04f3:0210 Elan Microelectronics Corp. AM-400 Hama Optical Mouse
 ID 04f2:0111 Chicony Electronics Co., Ltd KU-9908 Keyboard
 ID 058f:9254 Alcor Micro Corp. Hub
If a cellphone is not detected, see
http://ubuntuforums.org/archive/index.php/t-878554.html

If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@xxxxxxxxxxxxx

For candidate card in slot 00:1b.0, firmware information and bootup
diagnostics are:
 PCI slot	PCI ID		SubsystemID	Name
 ----------	---------	---------	--------------
 00:1b.0	8086:27d8	1025:0110	Audio device: Intel Corporation 82801G

 Modem interrupt assignment and sharing:
 22:       1542   IO-APIC-fasteoi   HDA Intel
 --- Bootup diagnostics for card in PCI slot 00:1b.0 ----
[    1.635160] PCI: 0000:00:1b.0 reg 10 64bit mmio: [d0340000, d0343fff]
[    1.635215] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    1.635283] pci 0000:00:1b.0: PME# disabled
[    1.661074] pci 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   20.996251] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) ->
IRQ 22
[   20.996376] HDA Intel 0000:00:1b.0: setting latency timer to 64

 The PCI slot 00:1b.0 of the modem card may be disabled early in
 a bootup process,  but then enabled later. If modem drivers load
 but the  modem is not responsive, read DOCs/Bootup.txt about possible fixes.
 Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
 if help is needed.



===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.

The ALSA verion is 1.0.19
The modem cards detected by "aplay -l"  are:
card 0: Intel [HDA Intel], device 6: Si3054 Modem [Si3054 Modem]

The /proc/asound/pcm file reports:
-----------------------
00-00: ALC883 Analog : ALC883 Analog : playback 1 : capture 1
00-01: ALC883 Digital : ALC883 Digital : playback 1
00-02: ALC883 Analog : ALC883 Analog : capture 1
00-06: Si3054 Modem : Si3054 Modem : playback 1 : capture 1

about /proc/asound/cards:
------------------------
 0 [Intel          ]: HDA-Intel - HDA Intel
                      HDA Intel at 0xd0340000 irq 22

 PCI slot 00:1b.0 has a High Definition Audio Card
 The drivers are in the kernel modules tree at:
 /lib/modules/2.6.27-10-generic/kernel/sound/pci/hda/snd-hda-intel.ko
/lib/modules/2.6.27-11-generic/kernel/sound/pci/hda/snd-hda-intel.ko
/lib/modules/2.6.27-11-server/kernel/sound/pci/hda/snd-hda-intel.ko
 The modem codec file for the HDA card is: /proc/asound/card0/codec#1
--------------------------------------------------------
Codec: LSI Si3054
Address: 1
Vendor Id: 0x11c13026
Subsystem Id: 0x10250110
Revision Id: 0x100700
Modem Function Group: 0x1

 The audio card hosts a softmodem chip:  0x11c13026

The softmodem chip 0x11c13026 is in principle supported by the COMM
support of slmodemd
and the joint snd-hda-intel audio+modem driver, begun with ALSA version
1.0.13.
For HDA cards with ALC883 chips, an upgrade to ALSA verions 1.0.15 way be
necessary. Instructions for Upgrading snd-hda-intel and its dependent
driver set are at:
http://linmodems.technion.ac.il/bigarch/archive-eighth/msg00838.html

If not a Conexant modem, the driver snd-hda-intel with its dependent drivers:
snd_hda_intel          33736  3
snd_hda_codec          77568  3
snd_hda_codec_si3054,snd_hda_codec_realtek,snd_hda_intel
snd_pcm                83844  8
snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_ac97_codec,snd_hda_codec_si3054,snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd                    67492  24
snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_ac97_codec,snd_hda_codec_si3054,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_dummy,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
snd_page_alloc         16776  5
snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_hda_intel,snd_pcm
----------
provide audio + modem support with the modem chip residing on the subsystem.
Any particular card can host any one of several soft modem chips.

=== Finished firmware and bootup diagnostics, next deducing cogent
software. ===

Predictive  diagnostics for card in bus 00:1b.0:
	Modem chipset  detected on
NAME="Audio device: Intel Corporation 82801G "
CLASS=0403
PCIDEV=8086:27d8
SUBSYS=1025:0110
IRQ=22
HDA=8086:27d8
SOFT=8086:27d8.HDA
CHIP=0x11c13026
IDENT=slmodemd
SLMODEMD_DEVICE=hw:0,6
Driver=snd-hda-intel

 For candidate modem in:  00:1b.0
   0403 Audio device: Intel Corporation 82801G
      Primary device ID:  8086:27d8
    Subsystem PCI_id  1025:0110
    Softmodem codec or chipset from diagnostics: 0x11c13026
                               from    Archives:
                        The HDA card softmodem chip is 0x11c13026


Support type needed or chipset:	slmodemd supporting the snd-hda-intel
audio+modem driver

 An ALSA (Advanced Linux Sound Architecture) modem driver:  snd-hda-intel
 provides Low Level support enabling contact with the modem hardware.
 For all BUT Conexant chip soft modems (using hsfmodem software)
 complementary High Level support is through a Smartlink utility:  slmodemd

 Download from http://linmodems.technion.ac.il/packages/smartlink/
 the package SLMODEMD.gcc4.3.tar.gz having a compiled slmodemd. Unpack
under Linux with:
 	$ tar zxf SLMODEMD.gcc4.3.tar.gz
 and read instructions therein. But briefly, the modem is setup with command:
 	sudo slmodemd -c YOUR_COUNTRY --alsa hw:0,6
 reporting dynamic creation of ports:
	/dev/ttySL0 --> /dev/pts/N   , with N some number
 Read DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow through
guidance.


Writing DOCs/Intel.txt
Writing DOCs/Smartlink.txt
============ end Smartlink section =====================

 Completed candidate modem analyses.

 The base of the UDEV device file system is: /dev/.udev

 Versions adequately match for the compiler installed: 4.3.2
             and the compiler used in kernel assembly: 4.3.2



 Minimal compiling resources appear complete:
   make utility - /usr/bin/make
   Compiler version 4.3
   linuc_headers base folder /lib/modules/2.6.27-10-generic/build

 However some compilations and executable functions may need additional
files,
 in the FileNames.h (so called kernel "h"eaders) collection installed in 
/usr/include/ .
 For martian_modem, additional required packages are needed. The also
required headers of package libc6 are commonly installed by default.
 Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev
packages, for kernels 2.6.24 and later versions.
 In not included on your install CD, search for them at
http://packages.ubuntu.com
 or comparable Repository for other Linux distros.
 When compiling ALSA drivers, the utility "patch" will also be needed.


Compressed files at: /usr/src/alsa-driver.tar.bz2 /usr/src/aufs.tar.bz2
/usr/src/linux-wlan-ng.tar.bz2


If a driver compilation fails, with message including some lack of some
FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The
minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev

If an alternate ethernet connection is available,
$  apt-get update
$  apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to
display the needed package list:

Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb


Checking pppd properties:
	-rwsr-xr-- 1 root dip 277160 2008-11-21 03:58 /usr/sbin/pppd

In case of an "error 17" "serial loopback" problem, see:
    http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html

To enable dialout without Root permission do:
	$ su - root  (not for Ubuntu)
        sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
	sudo chmod a+x /usr/sbin/pppd

Checking settings of:	/etc/ppp/options
0.0.0.0:10.1.1.1
defaultroute
replacedefaultroute
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx

In case of a message like:
   Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html

Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.

 Don't worry about the following, it is for experts should trouble
shooting be necessary.
==========================================================

# start/stop the daemon when the USB modem is connected
KERNEL=="slusb[0-9]*", GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon"
 Checking for modem support lines:
 --------------------------------------
     /device/modem symbolic link:   lrwxrwxrwx 1 root root 6 2009-04-23
23:50 /dev/modem -> ttySL0
slmodemd created symbolic link /dev/ttySL0:
     Within /etc/udev/ files:
/etc/udev/rules.d/030_sl-modem-daemon.rules:# start/stop the daemon when
the USB modem is connected
/etc/udev/rules.d/030_sl-modem-daemon.rules:KERNEL=="slusb[0-9]*",
GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon"
/etc/udev/sl-modem-daemon.rules:# start/stop the daemon when the USB modem
is connected
/etc/udev/sl-modem-daemon.rules:KERNEL=="slusb[0-9]*", GROUP="dialout",
RUN+="/etc/init.d/sl-modem-daemon"
     Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
/etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to
blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
/etc/modprobe.d/sl-modem-daemon.modutils:install slamr modprobe
--ignore-install ungrab-winmodem ;  modprobe --ignore-install slamr; test
-e /dev/slamr0 || (/bin/mknod -m 660 /dev/slamr0 c 242 0 2>/dev/null &&
chgrp dialout /dev/slamr0)
     Within any ancient /etc/devfs files:

     Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines --------




[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux