Yes, the slamr driver is needed.
Predictive diagnostics for card in bus fake:
Modem chipset detected on
NAME="FakeName"
CLASS=FakeClass
PCIDEV=2003:8800
SUBSYS=1801:2800
IRQ=fake
IDENT=slamr
For candidate modem in: fake
FakeClass FakeName
Primary device ID: 2003:8800
Support type needed or chipset: slamr
The modem is supported by the Smartlink
plus the slmodemd helper utility. Read the
DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow through guidance.
He needs to download:
http://linmodems.technion.ac.il/packages/smartlink/slmodem-2.9.11-20080817.tar.gz
and
http://linmodems.technion.ac.il/packages/smartlink/ungrab-winmodem-20080126.tar.gz
Everything appears to be there:
Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.2
linuc_headers base folder /lib/modules/2.6.23-parsix-16/build
after downloading and copying to linux partition extract both files with
$ tar -zxvf slmodem-2.9.11-20080817.tar.gz
$ cd slmodem-2.9.11-20080817/
$ make KERNEL_VER=/lib/modules/2.6.23-parsix-16/build
$ make
$ sudo make install
$ cd ..
$ tar -zxvf ungrab-winmodem-20080126.tar.gz
$ cd ungrab-winmodem-20080126/
$ sudo make
$ sudo make install
$ sudo modprobe ungrab-winmodem
$ sudo modprobe slamr
$ sudo mknod /dev/slamr0 c 240 0
$ sudo slmodemd -c USA /dev/slamr0
Report back if you have questions.
Regards,
Antonio
On Wed, Apr 15, 2009 at 2:57 PM, Marvin Stodolsky
<marvin.stodolsky@xxxxxxxxx> wrote:
> RE:
>
> Parsix GNU/Linux 1.0r0 (Ramon)
> Linux version 2.6.23-parsix-16 (root@memphis-mobile) (gcc version
> 4.2.3 20071123 (prerelease)
>
> There are no blacklisted modem drivers in /etc/modprobe* files
> Potentially useful modem drivers now loaded are:
> snd_atiixp_modem snd_via82xx_modem snd_intel8x0m slamr snd_hda_intel
>
>
> For candidate card in slot 03:00.0, firmware information and bootup
> diagnostics are:
> PCI slot PCI ID SubsystemID Name
> ---------- --------- --------- --------------
> 03:00.0 2003:8800 1801:2800 Modem: Smart Link Ltd. Unknown device 8800
> ======
> slamr is the appropriate driver, presuming ungrab-winmodem is also loaded.
>
> You first have to manually:
> # mknod /dev/slamr0 c 240 0
> (Antonio, please check, I'm not under Linux now)
> Then the modem should be activated by:
>
> # slmodemd -c USA /dev/slamr0
> Read the Smartlink.txt which I presume you have.
>
> MarvS
>
>
>
> On Wed, Apr 15, 2009 at 10:56 AM, H T <engineer.ht@xxxxxxxxx> wrote:
>> Hi.
>> My Modem is
>> DataSheen 562is DataFax Modem
>>
>
