Roberto, output from scanModem is incomplete, however it seems that your modem is supported by SLMODEMD.gcc4.3.tar.gz Support type needed or chipset: slmodemd An ALSA (Advanced Linux Sound Architecture) modem driver: provides Low Level support enabling contact with the modem hardware. For all BUT Conexant chip soft modems (using hsfmodem software) complementary High Level support is through a Smartlink utility: slmodemd Download from http://linmodems.technion.ac.il/packages/smartlink/ the package SLMODEMD.gcc4.3.tar.gz having a compiled slmodemd. Unpack under Lin ux with: $ tar zxf SLMODEMD.gcc4.3.tar.gz and read instructions therein. But briefly, the modem is setup with command: slmodemd -c YOUR_COUNTRY --alsa modem:1 reporting dynamic creation of ports: /dev/ttySL0 --> /dev/pts/N , with N some number Read DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow through guidan ce. If your alsa version is 1.0.17 you may download: http://linmodems.technion.ac.il/packages/smartlink/SLMODEMD_gcc4.3_alsa1.0.17.tar.gz instead of the one above. I do not know/can't tell your alsa version since the output of scanModem is incomplete. My best guess is to get the above package and apply the same instructions as above. Hopefully the Modem INterrupt does not bite back and you can get your modem going, if it does bite back, please do as it says there: The PCI slot 00:1e.3 of the modem card may be disabled early in a bootup process, but then enabled later. If modem drivers load but the modem is not responsive, read DOCs/Bootup.txt about possible fixes. Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx if help is needed. Regards, Antonio On Sun, Mar 29, 2009 at 7:38 AM, Roberto Rossini <robrossini@xxxxxxxxxx> wrote: > Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List > Server, > as HTML can contain viruses. Use as the email Subject Line: > YourName, YourCountry kernel 2.6.27-11-generic > With this Subject Line cogent experts will be alerted, and useful case > names left in the Archive. > YourCountry will enable Country specific guidance. Linux experts in > YourCountry > can be found through: http://www.linux.org/groups/index.html. > They will know your Country's modem code, which may be essential for > dialup service. > Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an > Internet Provider mail filters. > So in a day, also check the Archived responses at > http://www.linmodems.org > -------------------------- System information > ---------------------------- > CPU=i686, > Linux version 2.6.27-11-generic (buildd@rothera) (gcc version 4.3.2 > (Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Thu Jan 29 19:24:39 UTC 2009 > scanModem update of: 2009_02_21 > > There are no blacklisted modem drivers in /etc/modprobe* files > Potentially useful modem drivers now loaded are: > > > Attached USB devices are: > ID 046d:c03e Logitech, Inc. Premium Optical Wheel Mouse > If a cellphone is not detected, see > http://ubuntuforums.org/archive/index.php/t-878554.html > > If a USB modem or cellphone is attached and was not detected, please > provide available information in your request to discuss@xxxxxxxxxxxxx > > For candidate card in slot 00:1e.3, firmware information and bootup > diagnostics are: > PCI slot PCI ID SubsystemID Name > ---------- --------- --------- -------------- > 00:1e.3 8086:266d 103c:099c Modem: Intel Corporation > 82801FB/FBM/FR/FW/FRW > > Modem interrupt assignment and sharing: > 22: 13751 IO-APIC-fasteoi ohci1394 > --- Bootup diagnostics for card in PCI slot 00:1e.3 ---- > [ 0.505313] PCI: 0000:00:1e.3 reg 10 io port: [2400, 24ff] > [ 0.505321] PCI: 0000:00:1e.3 reg 14 io port: [2500, 257f] > [ 0.505364] pci 0000:00:1e.3: PME# supported from D0 D3hot D3cold > [ 0.505369] pci 0000:00:1e.3: PME# disabled > [ 1.796424] serial 0000:00:1e.3: PCI INT B -> GSI 22 (level, low) -> > IRQ 22 > [ 1.796433] serial 0000:00:1e.3: PCI INT B disabled > > The PCI slot 00:1e.3 of the modem card may be disabled early in > a bootup process, but then enabled later. If modem drivers load > but the modem is not responsive, read DOCs/Bootup.txt about possible > fixes. > Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx > if help is needed. > >
