Faggian, Support type needed or chipset: slmodemd An ALSA (Advanced Linux Sound Architecture) modem driver: snd-intel8x0m provides Low Level support enabling contact with the modem hardware. For all BUT Conexant chip soft modems (using hsfmodem software) complementary High Level support is through a Smartlink utility: slmodemd Download from http://linmodems.technion.ac.il/packages/smartlink/ the package SLMODEMD.gcc4.3.tar.gz having a compiled slmodemd. Unpack under Linux with: $ tar zxf SLMODEMD.gcc4.3.tar.gz and read instructions therein. But briefly, the modem is setup with command: slmodemd -c YOUR_COUNTRY --alsa modem:1 reporting dynamic creation of ports: /dev/ttySL0 --> /dev/pts/N , with N some number Read Smartlink.txt and Modem/YourSystem.txt for follow through guidance. butif the modem does not respond if you install the driver it might be because Modem interrupt assignment and sharing: 18: 479 IO-APIC-fasteoi SiS SI7012, SiS SI7013 Modem --- Bootup diagnostics for card in PCI slot 00:02.6 ---- PCI: 0000:00:02.6 reg 10 io port: [1400, 14ff] PCI: 0000:00:02.6 reg 14 io port: [1080, 10ff] pci 0000:00:02.6: supports D1 pci 0000:00:02.6: supports D2 pci 0000:00:02.6: PME# supported from D3hot D3cold pci 0000:00:02.6: PME# disabled serial 0000:00:02.6: enabling device (0000 -> 0001) serial 0000:00:02.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18 serial 0000:00:02.6: PCI INT C disabled Intel ICH Modem 0000:00:02.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18 The PCI slot 00:02.6 of the modem card may be disabled early in a bootup process, but then enabled later. If modem drivers load but the modem is not responsive, read Bootup.txt about possible fixes. Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx if help is needed. Regards, Antonio 2009/3/17 Faggian Enrico <enrico.faggian1@xxxxxxxxxxxxxxx>: > Buongiorno, la presente per richiedere gentilmente informazioni in merito ai > driver necessari al funzionamento del modem che utilizzo per la distro > openSUSE installata. > > Allego i dati relativi all’estrazione eseguita con scanModem. > > > > Potete per favore indicarmi anche come installare i driver una volta > scaricati? > > Grazie per la disponibilità. > > > > Saluti > > > > Enrico Faggian > > Prima di stampare, pensa all'ambiente ** Think about the environment before > printing > > Il contenuto e gli allegati di questo messaggio sono strettamente > confidenziali, e ne sono vietati la diffusione e l'uso non autorizzato. > > Le opinioni ivi eventualmente espresse sono quelle dell'autore: di > conseguenza il messaggio non costituisce impegno contrattuale tra > il Gruppo Intesa Sanpaolo ed il destinatario, e la banca non assume > alcuna responsabilita' riguardo ai contenuti del testo e dei relativi > allegati, ne' per eventuali intercettazioni, modifiche o danneggiamenti. > > Qualora il presente messaggio Le fosse pervenuto per errore, Le saremmo > grati se lo distruggesse e, via e-mail, ne comunicasse l' errata > ricezione all'indirizzo postmaster@xxxxxxxxxxxxxxxxxxx > > > This e-mail (and any attachment(s)) is strictly confidential and for use > only by intended recipient(s). Any opinions therein expressed are those > of the author. Therefore its content doesn't represent any commitment > between Intesa Sanpaolo Group and the recipient(s)and no liability > or responsibility is accepted by Sanpaolo Group for the above > mentioned content. > > Intesa Sanpaolo S.p.A. is a Bank authorised by Banca d'Italia; Intesa > Sanpaolo > S.p.A. - London Branch - is regulated by the Financial Services Authority > for the conduct of investment business in the UK. > > If you are not an intended recipient(s), please notify > postmaster@xxxxxxxxxxxxxxxxxx promptly and destroy this message. >
