Hello, Any progress on how i can install this rpm if i have a newer kernel than it supports? error: Failed dependencies: > /boot/vmlinuz-2.6.27.19-170.2.35.fc10.i586 is needed by > agrsm-kmdl-2.6.27.19-170.2.35.fc10-0.20080808-2.fc10.i586 Regards Soumen On Thu, Mar 19, 2009 at 12:12 AM, Soumen banerjee <soumen08@xxxxxxxxx> wrote: > Hello, > I tried the agrsm-kmdl packages, they say they need /boot/vmlinuz of a > specific kernel subversion. > error: Failed dependencies: > /boot/vmlinuz-2.6.27.19-170.2.35.fc10.i586 is needed by > agrsm-kmdl-2.6.27.19-170.2.35.fc10-0.20080808-2.fc10.i586 > So what do i do? I am on a newer kernel... > Thanks > Soumen > > > On Wed, Mar 18, 2009 at 10:41 PM, Antonio Olivares > <olivares14031@xxxxxxxxx> wrote: >> There are the ATRPMS repositories which house the rpms for the >> 11c11040 chipset. And there is always compiling from source. For >> this 11c11040 chipset it is definitely a pain :( >> >> Here are the specs. for the agrsm >> http://dl.atrpms.net/all/agrsm.spec >> >> Also the src rpm can be rebuilt? (Sorry about this I do not know much >> about it) >> http://atrpms.net/dist/f10/agrsm/ >> >> I hope that Axel has created these rpms, but I am not 100% certain :( >> >> Regards, >> >> Antonio >> >> On Wed, Mar 18, 2009 at 7:10 AM, Marvin Stodolsky >> <marvin.stodolsky@xxxxxxxxx> wrote: >>> Fedora users, >>> >>> Any suggestion to rpm-libs problem below? >>> >>> MarvS >>> >>> >>> ---------- Forwarded message ---------- >>> From: Soumen banerjee <soumen08@xxxxxxxxx> >>> Date: Wed, Mar 18, 2009 at 1:14 AM >>> Subject: Re: 11c11040, Re: agere modem for fedora 10? >>> To: Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> >>> >>> >>> Hello, >>> I have the newest version of rpm-libs offered by fedora in their >>> repositories. After i read about a bit i found that fedora does not >>> have support for an lzma compressed rpm as of v10 and will have it in >>> fc11. Is there an alternate process in case the rpm does not work? >>> Regards >>> Soumen >>> >>> On Tue, Mar 17, 2009 at 7:10 AM, Marvin Stodolsky >>> <marvin.stodolsky@xxxxxxxxx> wrote: >>>> Check your rpmlib vrersion. It may be earlier than 4.4.6-1 >>>> >>>> MarvS >>>> >>>> On Mon, Mar 16, 2009 at 1:27 AM, Soumen banerjee <soumen08@xxxxxxxxx> wrote: >>>>> Hello, >>>>> I found the rpm-libs package in the repository and installed it. now >>>>> trying to install the package says that >>>>> >>>>> rpmlib(PayloadIsLzma) <= 4.4.6-1 is needed by dkms-agrsm-2.1.80-4mdv2009.0.i586 >>>>> >>>>> even though rpmlib is installed. I tried using yum to autofix the >>>>> dependency but it does not recognize a dependency at all and says that >>>>> the package is unsigned. Please Help >>>>> regards >>>>> Soumen >>>>> >>>>> >>>>> On Mon, Mar 16, 2009 at 8:24 AM, Soumen banerjee <soumen08@xxxxxxxxx> wrote: >>>>>> Hello, >>>>>> the package depends on rpmlibs and there isn't a package in the fedora >>>>>> repos called rpmlibs. What needs to be installed instead? >>>>>> Soumen >>>>>> >>>>>> On Mon, Mar 16, 2009 at 7:38 AM, Marvin Stodolsky >>>>>> <marvin.stodolsky@xxxxxxxxx> wrote: >>>>>>> install the dkms package from fedora, >>>>>>> >>>>>>> See the resources at http://linux.zsolttech.com/linmodem/agrsm/ >>>>>>> Get the dkms-agrsm-2.1.80-4mdv2009.0.i586.rpm and install. >>>>>>> >>>>>>> See the example >>>>>>> http://linmodems.technion.ac.il/bigarch/archive-eighth/msg03863.html >>>>>>> >>>>>>> See the attached. >>>>>>> After the drivers are loaded & symbolic links made, the modem should >>>>>>> be found by >>>>>>> # wvdialconf >>>>>>> >>>>>>> if successfull >>>>>>> # gedit /etc/wvdial.conf >>>>>>> removing the symbols ; < > >>>>>>> while putting in your personal info. >>>>>>> >>>>>>> Please send to the List, not directly to me, >>>>>>> Others are more expert on the 11c11040 modem >>>>>>> >>>>>>> MarvS >>>>>>> >>>>>>> MarvS >>>>>>> >>>>>>> On Sun, Mar 15, 2009 at 9:41 PM, Soumen banerjee <soumen08@xxxxxxxxx> wrote: >>>>>>>> Hello, >>>>>>>> have done it. what next? >>>>>>>> Soumen >>>>>>>> >>>>>>>> On Mon, Mar 16, 2009 at 7:00 AM, Marvin Stodolsky >>>>>>>> <marvin.stodolsky@xxxxxxxxx> wrote: >>>>>>>>> compiling is necessary. Packages must be >>>>>>>>>>> installed, providing: >>>>>>>>>>> kernel-devel-2.6.27.15-170.2.24.fc10.i686 >>>>>>>>> >>>>>>>>> >>>>>>>>> On Sun, Mar 15, 2009 at 8:33 PM, Soumen banerjee <soumen08@xxxxxxxxx> wrote: >>>>>>>>>> Hello, >>>>>>>>>> Sorry for having been confusing.My linux is fedora 10 >>>>>>>>>> 2.6.27.15-170.2.24.fc10.i686. >>>>>>>>>> Regards >>>>>>>>>> Soumen >>>>>>>>>> >>>>>>>>>> On Mon, Mar 16, 2009 at 12:48 AM, Marvin Stodolsky >>>>>>>>>> <marvin.stodolsky@xxxxxxxxx> wrote: >>>>>>>>>>> Soumen >>>>>>>>>>> is your Linux Mandriva or Fedora?? >>>>>>>>>>> >>>>>>>>>>> Under CPU=i686, Mandriva Linux release 2008.1 (Official) for i586 >>>>>>>>>>> Kernel 2.6.24.4-custom, compiling is necessary. Packages must be >>>>>>>>>>> installed, providing: >>>>>>>>>>> kernel-source-2.6.24.4-custom or similiar linux-headers. Check with >>>>>>>>>>> the Mandriva list if you are not familiar with compiling. >>>>>>>>>>> >>>>>>>>>>> Then for the modem hosted on: >>>>>>>>>>> --------------------------------------------------- >>>>>>>>>>> 0403 Audio device: ATI Technologies Inc SBx00 Azalia >>>>>>>>>>> Primary device ID: 1002:4383 >>>>>>>>>>> Subsystem PCI_id 103c:30c2 >>>>>>>>>>> Softmodem codec or chipset from diagnostics: 0x11c11040 >>>>>>>>>>> >>>>>>>>>>> See the resources at http://linux.zsolttech.com/linmodem/agrsm/ >>>>>>>>>>> with example http://linmodems.technion.ac.il/bigarch/archive-eighth/msg03863.html >>>>>>>>>>> This is the longest term solution. Ty >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> On Sun, Mar 15, 2009 at 1:05 PM, Soumen banerjee <soumen08@xxxxxxxxx> wrote: >>>>>>>>>>>> Hello, >>>>>>>>>>>> attaching the modem data file. >>>>>>>>>>>> >>>>>>>>>>>> On Sun, Mar 15, 2009 at 9:51 PM, Marvin Stodolsky >>>>>>>>>>>> <marvin.stodolsky@xxxxxxxxx> wrote: >>>>>>>>>>>>> Soumen, >>>>>>>>>>>>> >>>>>>>>>>>>> There are several different Agere modem chipsets, with different drivers >>>>>>>>>>>>> Browse http://linmodems.technion.ac.il and download scanModem.gz . >>>>>>>>>>>>> Within a Linux partition >>>>>>>>>>>>> gunzip scanModem.gz >>>>>>>>>>>>> To make it executable: >>>>>>>>>>>>> chmod +x scanModem >>>>>>>>>>>>> Run diagnositics with: >>>>>>>>>>>>> ./scanModem >>>>>>>>>>>>> Only the ouput ModemData.txt should be sent to Discuss@xxxxxxxxxxxxx >>>>>>>>>>>>> >>>>>>>>>>>>> MarvS >>>>>>>>>>>>> >>>>>>>>>>>>> On Sun, Mar 15, 2009 at 5:48 AM, Soumen banerjee <soumen08@xxxxxxxxx> wrote: >>>>>>>>>>>>>> Hello, >>>>>>>>>>>>>> I have been here before with a mandriva 2008.1 install to get my agere >>>>>>>>>>>>>> mdem running and it worked. I have upgraded to fedora 10 now and i was >>>>>>>>>>>>>> trying to get this modem to work again. since fedora 10 carries the >>>>>>>>>>>>>> new 2.6.27 kernel, want to ask the exact process i should follow. I >>>>>>>>>>>>>> found some packages at ATRPMS for the 27 version of the kernel but >>>>>>>>>>>>>> they dont work with this exact subversion and my graphics driver works >>>>>>>>>>>>>> only with this version :-( >>>>>>>>>>>>>> >>>>>>>>>>>>>> what is the process to set it up? My exact kernel version is:- >>>>>>>>>>>>>> 2.6.27.15-170.2.24.fc10.i686 >>>>>>>>>>>>>> Thanks, >>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>> >>>>>> >>>>> >>>> >>> >> >
