Hi.
Im recently connect an internal modem Intel 537EP.
i found in google groups the file
"intel537ep-intrepid_2-Philippe.Vouters_i386.deb", and i install it.
however, when i run gnome-ppp and click on "detect" i have "no found
modem in your system"
i attach the modemdata.txt.
thanks.
Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 2.6.27-7-generic
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=i686,
Linux version 2.6.27-7-generic (buildd@palmer) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Tue Nov 4 19:33:20 UTC 2008
scanModem update of: 2009_03_01
The modem symbolic link is /dev/modem -> /dev/537
There are no blacklisted modem drivers in /etc/modprobe* files
Potentially useful modem drivers now loaded are:
slamr snd_hda_intel Intel537
Attached USB devices are:
ID 04b8:083c Seiko Epson Corp. MFP Composite Device
If a cellphone is not detected, see http://ubuntuforums.org/archive/index.php/t-878554.html
If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@xxxxxxxxxxxxx
For candidate card in slot 01:0a.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
01:0a.0 8086:1080 8086:1000 Modem: Intel Corporation FA82537EP 56K V.92 Data/Fax Modem PCI
Modem interrupt assignment and sharing:
--- Bootup diagnostics for card in PCI slot 01:0a.0 ----
[ 0.496118] PCI: 0000:01:0a.0 reg 10 32bit mmio: [dffff000, dfffffff]
[ 0.496124] PCI: 0000:01:0a.0 reg 14 io port: [e800, e8ff]
[ 0.496154] pci 0000:01:0a.0: PME# supported from D0 D3hot D3cold
[ 0.496158] pci 0000:01:0a.0: PME# disabled
[ 1.684828] serial 0000:01:0a.0: PCI INT A -> Link[LNKC] -> GSI 19 (level, low) -> IRQ 19
[ 1.685382] 0000:01:0a.0: ttyS1 at I/O 0xe808 (irq = 19) is a 16450
[ 1.685676] 0000:01:0a.0: ttyS2 at I/O 0xe810 (irq = 19) is a 8250
[ 1.685966] 0000:01:0a.0: ttyS3 at I/O 0xe818 (irq = 19) is a 16450
[ 1.686056] Couldn't register serial port 0000:01:0a.0: -28
The PCI slot 01:0a.0 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
For candidate card in slot 00:05.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:05.0 10de:03f0 1462:7309 Audio device: nVidia Corporation MCP61 High Definition Audio
Modem interrupt assignment and sharing:
22: 6 2516 IO-APIC-fasteoi ohci_hcd:usb2, HDA Intel
--- Bootup diagnostics for card in PCI slot 00:05.0 ----
[ 0.492409] PCI: 0000:00:05.0 reg 10 32bit mmio: [dfef4000, dfef7fff]
[ 0.492432] pci 0000:00:05.0: PME# supported from D3hot D3cold
[ 0.492435] pci 0000:00:05.0: PME# disabled
[ 1.288022] pci 0000:00:05.0: Enabling HT MSI Mapping
[ 11.424275] HDA Intel 0000:00:05.0: PCI INT B -> Link[LAZA] -> GSI 22 (level, low) -> IRQ 22
[ 11.424299] HDA Intel 0000:00:05.0: setting latency timer to 64
The PCI slot 00:05.0 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.
The ALSA verion is 1.0.17
The modem cards detected by "aplay -l" are: None
The /proc/asound/pcm file reports:
-----------------------
00-02: ALC883 Analog : ALC883 Analog : capture 1
00-01: ALC883 Digital : ALC883 Digital : playback 1
00-00: ALC883 Analog : ALC883 Analog : playback 1 : capture 1
about /proc/asound/cards:
------------------------
0 [NVidia ]: HDA-Intel - HDA NVidia
HDA NVidia at 0xdfef4000 irq 22
PCI slot 00:05.0 has a High Definition Audio Card
The drivers are in the kernel modules tree at:
/lib/modules/2.6.27-7-generic/kernel/sound/pci/hda/snd-hda-intel.ko
/lib/modules/2.6.27-11-generic/kernel/sound/pci/hda/snd-hda-intel.ko
UNEXPECTED HDA diagnostic outcome.
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===
Predictive diagnostics for card in bus 01:0a.0:
Modem chipset detected on
NAME="Modem: Intel Corporation FA82537EP 56K V.92 Data/Fax Modem PCI "
CLASS=0703
PCIDEV=8086:1080
SUBSYS=8086:1000
IRQ=19
IDENT=INTEL537EP
For candidate modem in: 01:0a.0
0703 Modem: Intel Corporation FA82537EP 56K V.92 Data/Fax Modem PCI
Primary device ID: 8086:1080
Support type needed or chipset: INTEL537EP
----------------end Softmodem section --------------
Predictive diagnostics for card in bus 00:05.0:
Modem chipset not detected on
NAME="Audio device: nVidia Corporation MCP61 High Definition Audio "
CLASS=0403
PCIDEV=10de:03f0
SUBSYS=1462:7309
IRQ=22
HDA=10de:03f0
SOFT=10de:03f0.HDA
High Definition Audio (HDA) cards MAY host a modem chip in their Subsystem,
and many are supported by the ALSA audio+modem driver snd-hda-intel
A modem was not detected on HDA card 10de:03f0.
If another modem card is present, then most likely 10de:03f0 does not host a modem.
If another modem card has not been detected, then possibilities are:
1) A Conexant modem chip is present on 10de:03f0, as Conexant chips
are frequently not detectable by ALSA diagnostics
2) The modem may be of the older non-PCI Controller Chipset (hardware) type.
Try detection with Root permission:
sudo wvdialconf /etc/wvdial.conf
For candidate modem in: 00:05.0
0403 Audio device: nVidia Corporation MCP61 High Definition Audio
Primary device ID: 10de:03f0
Subsystem PCI_id 1462:7309
Softmodem codec or chipset from diagnostics:
from Archives:
Support type needed or chipset:
Support can likely be achieved through two mutually exclusive alternatives:
1) The hsfmodem software for Conexant chipset modems: Read DOCs/Conexant.txt
The following ALSA alternative CANNOT work with Conexant modems.
2) An ALSA modem driver plus slmodemd. Read DOCs/Smartlink.txt for details, and
to test get the package SLMODEMD.gcc4.3.tar.gz from:
http://linmodems.technion.ac.il/packages/smartlink/
----------------end Softmodem section --------------
Writing DOCs/Smartlink.txt
============ end Smartlink section =====================
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.3.2
and the compiler used in kernel assembly: 4.3.2
Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.3
linuc_headers base folder /lib/modules/2.6.27-7-generic/build
However some compilations and executable functions may need additional files,
in the FileNames.h (so called kernel "h"eaders) collection installed in /usr/include/ .
For martian_modem, additional required packages are needed. The also required headers of package libc6 are commonly installed by default.
Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
In not included on your install CD, search for them at http://packages.ubuntu.com
or comparable Repository for other Linux distros.
When compiling ALSA drivers, the utility "patch" will also be needed.
If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking pppd properties:
-rwsr-xr-- 1 root dip 277160 2008-11-20 15:58 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
sudo chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.
Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================
# start/stop the daemon when the USB modem is connected
KERNEL=="slusb[0-9]*", GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon"
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link: lrwxrwxrwx 1 root root 8 2009-03-16 12:58 /dev/modem -> /dev/537
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
/etc/udev/rules.d/10-local.rules:KERNEL=="536ep0", SYMLINK=="modem"
/etc/udev/rules.d/030_sl-modem-daemon.rules:# start/stop the daemon when the USB modem is connected
/etc/udev/rules.d/030_sl-modem-daemon.rules:KERNEL=="slusb[0-9]*", GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon"
/etc/udev/sl-modem-daemon.rules:# start/stop the daemon when the USB modem is connected
/etc/udev/sl-modem-daemon.rules:KERNEL=="slusb[0-9]*", GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon"
Within /etc/modprobe.conf files:
/etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
/etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
/etc/modprobe.d/sl-modem-daemon.modutils:install slamr modprobe --ignore-install ungrab-winmodem ; modprobe --ignore-install slamr; test -e /dev/slamr0 || (/bin/mknod -m 660 /dev/slamr0 c 242 0 2>/dev/null && chgrp dialout /dev/slamr0)
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
