Thanks,
the kdesu kwrite commands worked well :-)
kdesu kwrite wvtest brought up a file, I edited it and saved it, the file
is below.
kdesu kwrite /etc/wvdial.conf brought up a file, I edited it and saved it,
the file is below.
dial out failed, I need a valid log in name. I am not sure what that is or
where to add it ?
I have my user name, password and phone number.
Thanks, Nonni
-------------------------------------------------------------------------------
(attemt to dial out)
linux-s4w1:/home/nonni # wvdial
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Idle Seconds = 300, disabling automatic reconnect.
--> Configuration does not specify a valid login name.
linux-s4w1:/home/nonni #
----------------------------------------------------
kdesu kwrite wvtest
[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Modem Type = Analog Modem
; Phone = 2254638
ISDN = 0
; Password = XXXXXXXXX
; Username = fperrin@xxxxxxx
Modem = /dev/ttySL0
Baud = 460800
Carrier Check = no
---------------------------------------------------------
kdesu kwrite /etc/wvdialconf
( i notice that there is no phone number asked for in this one )
[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Modem = /dev/ttySL0
Phone = 0
Idle Seconds = 300
Modem Type = Analog Modem
Stupid Mode = 1
Compuserve = 0
Baud = 460800
Auto DNS = 1
Dial Command = ATDT
Ask Password = 0
ISDN = 0
; Password = XXXXXXXXX
; Username = fperrin@xxxxxxx
Carrier Check = no
