Hello Linmodems,
I am trying to connect with my Ubuntu via a modem here in Chad and it
is not working. I am currenty using my Windows partition and I am a
newbie at Linux. thank you for you help. Please find attached
ModemData and dmesg and hoepfully you can give me simple steps on how
to compile/install my modem software.
thank you for your help
Adrian
Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 2.6.24-21-generic
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=i686,
Linux version 2.6.24-21-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Tue Oct 21 23:43:45 UTC 2008
scanModem update of: 2009_02_21
There are no blacklisted modem drivers in /etc/modprobe* files
Potentially useful modem drivers now loaded are:
snd_intel8x0m
If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@xxxxxxxxxxxxx
For candidate card in slot 00:1e.3, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:1e.3 8086:266d 103c:309d Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW
Modem interrupt assignment and sharing:
19: 1 IO-APIC-fasteoi ipw2200, eth0, Intel ICH6 Modem
--- Bootup diagnostics for card in PCI slot 00:1e.3 ----
[ 8.657166] ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 20 (level, low) -> IRQ 19
[ 8.657175] ACPI: PCI interrupt for device 0000:00:1e.3 disabled
[ 48.367912] ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 20 (level, low) -> IRQ 19
[ 48.367933] PCI: Setting latency timer of device 0000:00:1e.3 to 64
The PCI slot 00:1e.3 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.
The ALSA verion is 1.0.16
The modem cards detected by "aplay -l" are: None
The /proc/asound/pcm file reports:
-----------------------
00-04: Intel ICH - IEC958 : Intel ICH6 - IEC958 : playback 1
00-03: Intel ICH - ADC2 : Intel ICH6 - ADC2 : capture 1
00-02: Intel ICH - MIC2 ADC : Intel ICH6 - MIC2 ADC : capture 1
00-01: Intel ICH - MIC ADC : Intel ICH6 - MIC ADC : capture 1
00-00: Intel ICH : Intel ICH6 : playback 1 : capture 1
about /proc/asound/cards:
------------------------
0 [ICH6 ]: ICH4 - Intel ICH6
Intel ICH6 with AD1981B at irq 17
===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.
The ALSA verion is 1.0.16
The modem cards detected by "aplay -l" are:
card 1: Modem [Intel ICH6 Modem], device 0: Intel ICH - Modem [Intel ICH6 Modem - Modem]
The /proc/asound/pcm file reports:
-----------------------
00-04: Intel ICH - IEC958 : Intel ICH6 - IEC958 : playback 1
00-03: Intel ICH - ADC2 : Intel ICH6 - ADC2 : capture 1
00-02: Intel ICH - MIC2 ADC : Intel ICH6 - MIC2 ADC : capture 1
00-01: Intel ICH - MIC ADC : Intel ICH6 - MIC ADC : capture 1
00-00: Intel ICH : Intel ICH6 : playback 1 : capture 1
01-00: Intel ICH - Modem : Intel ICH6 Modem - Modem : playback 1 : capture 1
about /proc/asound/cards:
------------------------
0 [ICH6 ]: ICH4 - Intel ICH6
Intel ICH6 with AD1981B at irq 17
1 [Modem ]: ICH-MODEM - Intel ICH6 Modem
Intel ICH6 Modem at irq 19
Modem firmware information is in /proc/asound/card1/codec97#0/mc97#1-1
-----------------------------------------------
Extended modem ID: codec=1 LIN1
Lines in: /proc/asound/card1/codec97#0/mc97#1-1+regs
-------------------------------
0:7c = 5349 and 0:7e = 4c27
are translated from hexadecimal code into the modem chip identifier: SIL27
The driver snd-intel8x0m with its dependent drivers:
snd_intel8x0m 18956 0
snd_ac97_codec 101028 2 snd_intel8x0m,snd_intel8x0
snd_pcm 78596 4 snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd 56996 18 snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_dummy,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
snd_page_alloc 11400 3 snd_intel8x0m,snd_intel8x0,snd_pcm
----------
provide modem + audio support.
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.2.3
and the compiler used in kernel assembly: 4.2.4
The patch utility is needed and is needed for compiling ALSA drivers, and possibly others.
Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.2
linuc_headers base folder /lib/modules/2.6.24-21-generic/build
However some compilations and executable functions may need additional files,
in the FileNames.h (so called kernel "h"eaders) collection installed in /usr/include/ .
For martian_modem, additional required packages are needed. The also required headers of package libc6 are commonly installed by default.
Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
In not included on your install CD, search for them at http://packages.ubuntu.com
or comparable Repository for other Linux distros.
When compiling ALSA drivers, the utility "patch" will also be needed.
If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking pppd properties:
-rwsr-xr-- 1 root dip 269256 2007-10-04 21:57 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
sudo chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.
Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
/etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
CPU0
0: 20471 IO-APIC-edge timer
1: 699 IO-APIC-edge i8042
8: 37 IO-APIC-edge rtc
9: 2170 IO-APIC-fasteoi acpi
12: 9083 IO-APIC-edge i8042
14: 21523 IO-APIC-edge libata
15: 0 IO-APIC-edge libata
16: 0 IO-APIC-fasteoi uhci_hcd:usb4, fglrx
17: 463 IO-APIC-fasteoi Intel ICH6
18: 1 IO-APIC-fasteoi yenta, tifm_7xx1, sdhci:slot0, sdhci:slot1, sdhci:slot2
19: 1 IO-APIC-fasteoi ipw2200, eth0, Intel ICH6 Modem
20: 0 IO-APIC-fasteoi uhci_hcd:usb1, ehci_hcd:usb5
21: 0 IO-APIC-fasteoi uhci_hcd:usb2
22: 0 IO-APIC-fasteoi uhci_hcd:usb3
23: 3 IO-APIC-fasteoi ohci1394
NMI: 0 Non-maskable interrupts
LOC: 11595 Local timer interrupts
RES: 0 Rescheduling interrupts
CAL: 0 function call interrupts
TLB: 0 TLB shootdowns
TRM: 0 Thermal event interrupts
SPU: 0 Spurious interrupts
ERR: 0
MIS: 0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.24-21-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Tue Oct 21 23:43:45 UTC 2008 (Ubuntu 2.6.24-21.43-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fee0000 (usable)
[ 0.000000] BIOS-e820: 000000003fee0000 - 000000003feeb000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003feeb000 - 000000003ff00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0006000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] 126MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 261856) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 261856
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 261856
[ 0.000000] On node 0 totalpages: 261856
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 253 pages used for memmap
[ 0.000000] HighMem zone: 32227 pages, LIFO batch:7
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F76A0 checksum 0
[ 0.000000] ACPI: RSDP 000F76A0, 0014 (r0 HP )
[ 0.000000] ACPI: RSDT 3FEE4873, 0044 (r1 HP 309E 6040000 LTP 0)
[ 0.000000] ACPI: FACP 3FEEAE88, 0074 (r1 HP 309E 6040000 LOHR 5F)
[ 0.000000] ACPI: DSDT 3FEE5118, 5D70 (r1 HP 309E 6040000 MSFT 100000E)
[ 0.000000] ACPI: FACS 3FEFBFC0, 0040
[ 0.000000] ACPI: APIC 3FEEAEFC, 0068 (r1 HP 309E 6040000 LOHR 5F)
[ 0.000000] ACPI: BOOT 3FEEAFD8, 0028 (r1 HP 309E 6040000 LTP 1)
[ 0.000000] ACPI: MCFG 3FEEAF9C, 003C (r1 HP 309E 6040000 LTP 0)
[ 0.000000] ACPI: SSDT 3FEE4CCF, 0235 (r1 HP 309E 3000 INTL 20030224)
[ 0.000000] ACPI: SSDT 3FEE4AF7, 01D8 (r1 HP 309E 3001 INTL 20030224)
[ 0.000000] ACPI: SSDT 3FEE49E3, 0114 (r1 HP 309E 3000 INTL 20030224)
[ 0.000000] ACPI: SSDT 3FEE48B7, 012C (r1 HP 309E 1 INTL 20030224)
[ 0.000000] ACPI: DMI detected: Hewlett-Packard
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:13 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000dc000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000dc000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259811
[ 0.000000] Kernel command line: root=UUID=b53abbbf-5f5a-48c9-b121-3380db47dd7e ro quiet splash
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1729.576 MHz processor.
[ 6.784509] Console: colour VGA+ 80x25
[ 6.784513] console [tty0] enabled
[ 6.784818] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 6.785226] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 6.814409] Memory: 1026296k/1047424k available (2177k kernel code, 20456k reserved, 1005k data, 368k init, 129920k highmem)
[ 6.814417] virtual kernel memory layout:
[ 6.814418] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 6.814419] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 6.814421] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 6.814422] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 6.814423] .init : 0xc0421000 - 0xc047d000 ( 368 kB)
[ 6.814424] .data : 0xc03205e4 - 0xc041bdc4 (1005 kB)
[ 6.814426] .text : 0xc0100000 - 0xc03205e4 (2177 kB)
[ 6.814429] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 6.814463] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 6.894482] Calibrating delay using timer specific routine.. 3462.83 BogoMIPS (lpj=6925678)
[ 6.894505] Security Framework initialized
[ 6.894512] SELinux: Disabled at boot.
[ 6.894526] AppArmor: AppArmor initialized
[ 6.894530] Failure registering capabilities with primary security module.
[ 6.894538] Mount-cache hash table entries: 512
[ 6.894653] Initializing cgroup subsys ns
[ 6.894658] Initializing cgroup subsys cpuacct
[ 6.894667] CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000 00000000
[ 6.894678] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 6.894680] CPU: L2 cache: 2048K
[ 6.894683] CPU: After all inits, caps: afe9fbff 00100000 00000000 00042040 00000180 00000000 00000000 00000000
[ 6.894692] Compat vDSO mapped to ffffe000.
[ 6.894703] Checking 'hlt' instruction... OK.
[ 6.910847] SMP alternatives: switching to UP code
[ 6.912646] Freeing SMP alternatives: 11k freed
[ 6.912747] Early unpacking initramfs... done
[ 7.267501] ACPI: Core revision 20070126
[ 7.267568] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 7.279961] CPU0: Intel(R) Pentium(R) M processor 1.73GHz stepping 08
[ 7.279978] Total of 1 processors activated (3462.83 BogoMIPS).
[ 7.280167] ENABLING IO-APIC IRQs
[ 7.280357] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 7.426503] Brought up 1 CPUs
[ 7.426529] CPU0 attaching sched-domain:
[ 7.426532] domain 0: span 01
[ 7.426534] groups: 01
[ 7.426684] net_namespace: 64 bytes
[ 7.426695] Booting paravirtualized kernel on bare hardware
[ 7.427144] Time: 13:02:43 Date: 02/28/09
[ 7.427167] NET: Registered protocol family 16
[ 7.427347] EISA bus registered
[ 7.427373] ACPI: bus type pci registered
[ 7.427845] PCI: PCI BIOS revision 2.10 entry at 0xfd860, last bus=7
[ 7.427847] PCI: Using configuration type 1
[ 7.427861] Setting up standard PCI resources
[ 7.436379] ACPI: EC: Look up EC in DSDT
[ 7.437815] ACPI: Interpreter enabled
[ 7.437819] ACPI: (supports S0 S3 S4 S5)
[ 7.437832] ACPI: Using IOAPIC for interrupt routing
[ 7.438280] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 7.448614] ACPI: EC: GPE = 0x1b, I/O: command/status = 0x66, data = 0x62
[ 7.448617] ACPI: EC: driver started in interrupt mode
[ 7.448655] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 7.449334] Force enabled HPET at base address 0xfed00000
[ 7.449340] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 7.449344] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
[ 7.450249] PCI: Transparent bridge - 0000:00:1e.0
[ 7.450331] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 7.450565] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[ 7.450691] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 7.450822] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 7.452831] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 7.452923] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 7.453011] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 7.453100] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 7.453188] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 7.453276] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 7.453363] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 7.453454] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 7.453566] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 7.453594] pnp: PnP ACPI init
[ 7.453601] ACPI: bus type pnp registered
[ 7.456345] pnp: PnP ACPI: found 8 devices
[ 7.456348] ACPI: ACPI bus type pnp unregistered
[ 7.456351] PnPBIOS: Disabled by ACPI PNP
[ 7.456552] PCI: Using ACPI for IRQ routing
[ 7.456555] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 7.456559] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.0
[ 7.456562] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.0
[ 7.456564] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.0
[ 7.490463] NET: Registered protocol family 8
[ 7.490465] NET: Registered protocol family 20
[ 7.490619] hpet clockevent registered
[ 7.490625] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 7.490629] hpet0: 3 64-bit timers, 14318180 Hz
[ 7.491663] AppArmor: AppArmor Filesystem Enabled
[ 7.494455] Time: tsc clocksource has been installed.
[ 7.502489] system 00:04: ioport range 0x200-0x20f has been reserved
[ 7.502492] system 00:04: ioport range 0x800-0x80f has been reserved
[ 7.502495] system 00:04: ioport range 0x1000-0x107f has been reserved
[ 7.502498] system 00:04: ioport range 0x1180-0x11bf has been reserved
[ 7.502501] system 00:04: iomem range 0xe0000000-0xefffffff could not be reserved
[ 7.502505] system 00:04: iomem range 0xf0000000-0xf0003fff could not be reserved
[ 7.502508] system 00:04: iomem range 0xf0004000-0xf0004fff could not be reserved
[ 7.502511] system 00:04: iomem range 0xf0005000-0xf0005fff could not be reserved
[ 7.502514] system 00:04: iomem range 0xf0008000-0xf000bfff could not be reserved
[ 7.502517] system 00:04: iomem range 0xfed20000-0xfed8ffff could not be reserved
[ 7.532903] PCI: Bridge: 0000:00:01.0
[ 7.532906] IO window: 3000-3fff
[ 7.532909] MEM window: c8100000-c81fffff
[ 7.532912] PREFETCH window: d0000000-d7ffffff
[ 7.532915] PCI: Bridge: 0000:00:1c.0
[ 7.532917] IO window: disabled.
[ 7.532922] MEM window: disabled.
[ 7.532926] PREFETCH window: disabled.
[ 7.532934] PCI: Bus 7, cardbus bridge: 0000:06:06.0
[ 7.532936] IO window: 00004400-000044ff
[ 7.532942] IO window: 00004800-000048ff
[ 7.532948] PREFETCH window: 50000000-53ffffff
[ 7.532954] MEM window: 54000000-57ffffff
[ 7.532959] PCI: Bridge: 0000:00:1e.0
[ 7.532962] IO window: 4000-4fff
[ 7.532968] MEM window: c8200000-c82fffff
[ 7.532972] PREFETCH window: disabled.
[ 7.532988] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 7.532993] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 7.533014] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 7.533021] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 7.533033] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 7.533051] ACPI: PCI Interrupt 0000:06:06.0[A] -> GSI 22 (level, low) -> IRQ 18
[ 7.533058] PCI: Setting latency timer of device 0000:06:06.0 to 64
[ 7.533069] NET: Registered protocol family 2
[ 7.570507] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 7.570721] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 7.571464] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 7.571894] TCP: Hash tables configured (established 131072 bind 65536)
[ 7.571897] TCP reno registered
[ 7.582598] checking if image is initramfs... it is
[ 7.994420] Switched to high resolution mode on CPU 0
[ 8.272414] Freeing initrd memory: 7321k freed
[ 8.272622] Simple Boot Flag at 0x36 set to 0x1
[ 8.273020] audit: initializing netlink socket (disabled)
[ 8.273035] audit(1235826163.344:1): initialized
[ 8.273202] highmem bounce pool size: 64 pages
[ 8.275074] VFS: Disk quotas dquot_6.5.1
[ 8.275149] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 8.275284] io scheduler noop registered
[ 8.275286] io scheduler anticipatory registered
[ 8.275288] io scheduler deadline registered
[ 8.275299] io scheduler cfq registered (default)
[ 8.275393] Boot video device is 0000:01:00.0
[ 8.275512] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 8.275540] assign_interrupt_mode Found MSI capability
[ 8.275567] Allocate Port Service[0000:00:01.0:pcie00]
[ 8.275639] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 8.275690] assign_interrupt_mode Found MSI capability
[ 8.275731] Allocate Port Service[0000:00:1c.0:pcie00]
[ 8.275763] Allocate Port Service[0000:00:1c.0:pcie02]
[ 8.276001] isapnp: Scanning for PnP cards...
[ 8.630639] isapnp: No Plug & Play device found
[ 8.656496] Real Time Clock Driver v1.12ac
[ 8.656595] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 8.657166] ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 20 (level, low) -> IRQ 19
[ 8.657175] ACPI: PCI interrupt for device 0000:00:1e.3 disabled
[ 8.657774] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 8.657843] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 8.657935] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 8.663564] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 8.666955] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 8.666959] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 8.666962] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 8.666964] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 8.666966] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 8.678344] mice: PS/2 mouse device common for all mice
[ 8.678446] EISA: Probing bus 0 at eisa.0
[ 8.678454] Cannot allocate resource for EISA slot 1
[ 8.678457] Cannot allocate resource for EISA slot 2
[ 8.678459] Cannot allocate resource for EISA slot 3
[ 8.678461] Cannot allocate resource for EISA slot 4
[ 8.678478] EISA: Detected 0 cards.
[ 8.678482] cpuidle: using governor ladder
[ 8.678484] cpuidle: using governor menu
[ 8.678573] NET: Registered protocol family 1
[ 8.678598] Using IPI No-Shortcut mode
[ 8.678629] registered taskstats version 1
[ 8.678736] Magic number: 13:418:29
[ 8.678742] hash matches device ttydc
[ 8.678821] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 8.678823] EDD information not available.
[ 8.679005] Freeing unused kernel memory: 368k freed
[ 8.679030] Write protecting the kernel read-only data: 801k
[ 8.698310] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 9.110825] atkbd.c: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly.
[ 9.310671] atkbd.c: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly.
[ 9.510650] atkbd.c: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly.
[ 9.710865] atkbd.c: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly.
[ 9.874696] fuse init (API version 7.9)
[ 9.895705] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
[ 9.899519] ACPI: Thermal Zone [THR0] (68 C)
[ 9.901789] ACPI: Invalid passive threshold
[ 9.902484] ACPI: Thermal Zone [THR1] (67 C)
[ 10.442099] usbcore: registered new interface driver usbfs
[ 10.442122] usbcore: registered new interface driver hub
[ 10.450054] usbcore: registered new device driver usb
[ 10.462049] USB Universal Host Controller Interface driver v3.0
[ 10.462110] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20
[ 10.462121] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 10.462126] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 10.462448] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 10.462479] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001800
[ 10.462611] usb usb1: configuration #1 chosen from 1 choice
[ 10.462634] hub 1-0:1.0: USB hub found
[ 10.462639] hub 1-0:1.0: 2 ports detected
[ 10.566675] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 21
[ 10.566688] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 10.566693] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 10.566716] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 10.566748] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00001820
[ 10.566863] usb usb2: configuration #1 chosen from 1 choice
[ 10.566885] hub 2-0:1.0: USB hub found
[ 10.566891] hub 2-0:1.0: 2 ports detected
[ 10.608974] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 10.643264] SCSI subsystem initialized
[ 10.670095] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 22
[ 10.670108] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 10.670113] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 10.670139] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 10.670171] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00001840
[ 10.670279] usb usb3: configuration #1 chosen from 1 choice
[ 10.670301] hub 3-0:1.0: USB hub found
[ 10.670307] hub 3-0:1.0: 2 ports detected
[ 10.689990] libata version 3.00 loaded.
[ 10.774082] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[ 10.774095] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 10.774100] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 10.774122] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 10.774156] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860
[ 10.774262] usb usb4: configuration #1 chosen from 1 choice
[ 10.774285] hub 4-0:1.0: USB hub found
[ 10.774291] hub 4-0:1.0: 2 ports detected
[ 10.878237] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20
[ 10.878253] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 10.878257] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 10.878280] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 10.882202] ehci_hcd 0000:00:1d.7: debug port 1
[ 10.882208] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 10.882215] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xc8000000
[ 10.897982] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 10.898079] usb usb5: configuration #1 chosen from 1 choice
[ 10.898104] hub 5-0:1.0: USB hub found
[ 10.898110] hub 5-0:1.0: 8 ports detected
[ 11.002156] ACPI: PCI Interrupt 0000:06:06.2[C] -> GSI 21 (level, low) -> IRQ 23
[ 11.051977] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[23] MMIO=[c8208000-c82087ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 11.055019] 8139cp 0000:06:07.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[ 11.055023] 8139cp 0000:06:07.0: Try the "8139too" driver instead.
[ 11.056685] ata_piix 0000:00:1f.1: version 2.12
[ 11.056701] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 22
[ 11.056734] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 11.057311] 8139too Fast Ethernet driver 0.9.28
[ 11.058008] scsi0 : ata_piix
[ 11.058470] scsi1 : ata_piix
[ 11.059008] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18c0 irq 14
[ 11.059011] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18c8 irq 15
[ 11.386328] ata1.00: ATA-6: TOSHIBA MK1031GAS, AA204C, max UDMA/100
[ 11.386332] ata1.00: 195371568 sectors, multi 16: LBA
[ 11.386356] ata1.01: ATAPI: MATSHITAUJ-840D, 1.02, max MWDMA2
[ 11.394257] ata1.00: configured for UDMA/100
[ 11.489875] Clocksource tsc unstable (delta = -22326622009 ns)
[ 11.493949] Time: hpet clocksource has been installed.
[ 11.495975] ata1.01: configured for MWDMA2
[ 11.496018] ata2: port disabled. ignoring.
[ 11.496150] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1031GA AA20 PQ: 0 ANSI: 5
[ 11.497255] scsi 0:0:1:0: CD-ROM MATSHITA UJ-840D 1.02 PQ: 0 ANSI: 5
[ 11.500379] ACPI: PCI Interrupt 0000:06:07.0[A] -> GSI 20 (level, low) -> IRQ 19
[ 11.501491] eth0: RealTek RTL8139 at 0x4000, 00:0a:e4:d9:cc:6d, IRQ 19
[ 11.501494] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 11.514401] Driver 'sd' needs updating - please use bus_type methods
[ 11.514477] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
[ 11.514489] sd 0:0:0:0: [sda] Write Protect is off
[ 11.514492] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 11.514535] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 11.514580] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
[ 11.514590] sd 0:0:0:0: [sda] Write Protect is off
[ 11.514592] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 11.514607] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 11.514610] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 11.530439] sda1 sda2 sda3 < sda5 > sda4
[ 11.531488] sd 0:0:0:0: [sda] Attached SCSI disk
[ 11.537463] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 11.537480] sr 0:0:1:0: Attached scsi generic sg1 type 5
[ 11.543107] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 11.543111] Uniform CD-ROM driver Revision: 3.20
[ 11.543153] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 11.618383] ieee1394: Host added: ID:BUS[0-00:1023] GUID[05e40a00fd2b5042]
[ 11.647884] Attempting manual resume
[ 11.647887] swsusp: Resume From Partition 8:4
[ 11.647889] PM: Checking swsusp image.
[ 11.648038] PM: Resume from disk failed.
[ 11.663909] kjournald starting. Commit interval 5 seconds
[ 11.663918] EXT3-fs: mounted filesystem with ordered data mode.
[ 14.885459] Linux agpgart interface v0.102
[ 15.049430] iTCO_vendor_support: vendor-support=0
[ 15.110859] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 15.110948] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060)
[ 15.110981] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 15.177424] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 15.233449] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 15.353430] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 15.598422] input: Power Button (FF) as /devices/virtual/input/input3
[ 15.625321] ACPI: Power Button (FF) [PWRF]
[ 15.625373] input: Lid Switch as /devices/virtual/input/input4
[ 15.642839] ACPI: Lid Switch [LID0]
[ 15.642896] input: Sleep Button (CM) as /devices/virtual/input/input5
[ 15.658521] intel_rng: FWH not detected
[ 15.669335] ACPI: Sleep Button (CM) [SLPB]
[ 15.669391] input: Power Button (CM) as /devices/virtual/input/input6
[ 15.701318] ACPI: Power Button (CM) [PWB]
[ 15.701391] ACPI: WMI-Acer: Mapper loaded
[ 15.772178] Yenta: CardBus bridge found at 0000:06:06.0 [103c:309d]
[ 15.772205] Yenta: Enabling burst memory read transactions
[ 15.772211] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 15.772213] Yenta: Routing CardBus interrupts to PCI
[ 15.772219] Yenta TI: socket 0000:06:06.0, mfunc 0x01aa1b02, devctl 0x64
[ 15.919852] ieee80211_crypt: registered algorithm 'NULL'
[ 16.002065] Yenta: ISA IRQ mask 0x0cf8, PCI irq 18
[ 16.002070] Socket status: 30000006
[ 16.002073] Yenta: Raising subordinate bus# of parent bus (#06) from #07 to #0a
[ 16.002078] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
[ 16.002081] cs: IO port probe 0x4000-0x4fff: clean.
[ 16.002317] pcmcia: parent PCI bridge Memory window: 0xc8200000 - 0xc82fffff
[ 16.113774] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 16.113779] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@xxxxxxxxxxxxxxx>
[ 16.615842] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[ 16.615847] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[ 16.615932] ACPI: PCI Interrupt 0000:06:05.0[A] -> GSI 20 (level, low) -> IRQ 19
[ 16.653121] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[ 16.749962] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input7
[ 16.781133] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 16.781692] atkbd.c: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly.
[ 16.841213] sdhci: Secure Digital Host Controller Interface driver
[ 16.841217] sdhci: Copyright(c) Pierre Ossman
[ 16.981531] atkbd.c: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly.
[ 17.119244] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 17.426248] [fglrx] Maximum main memory to use for locked dma buffers: 928 MBytes.
[ 17.426289] [fglrx] ASYNCIO init succeed!
[ 17.426765] [fglrx] PAT is enabled successfully!
[ 17.427818] [fglrx] module loaded - fglrx 8.47.3 [Feb 25 2008] on minor 0
[ 17.463046] input: PS/2 Mouse as /devices/virtual/input/input8
[ 17.503098] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input9
[ 17.571649] ACPI: AC Adapter [AC] (on-line)
[ 17.693284] ACPI: Battery Slot [BAT0] (battery present)
[ 18.892129] ipw2200: Radio Frequency Kill Switch is On:
[ 18.892131] Kill switch must be turned off for wireless networking to work.
[ 18.997438] cs: IO port probe 0x100-0x3af: clean.
[ 18.999419] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 19.000276] cs: IO port probe 0x820-0x8ff: clean.
[ 19.000999] cs: IO port probe 0xc00-0xcf7: clean.
[ 19.001868] cs: IO port probe 0xa00-0xaff: clean.
[ 19.040390] ipw2200: Detected geography ZZR (14 802.11bg channels, 0 802.11a channels)
[ 19.040434] ACPI: PCI Interrupt 0000:06:06.3[A] -> GSI 22 (level, low) -> IRQ 18
[ 19.040500] sdhci: SDHCI controller found at 0000:06:06.4 [104c:8034] (rev 0)
[ 19.040520] ACPI: PCI Interrupt 0000:06:06.4[A] -> GSI 22 (level, low) -> IRQ 18
[ 19.040535] sdhci:slot0: Will use DMA mode even though HW doesn't fully claim to support it.
[ 19.040580] mmc0: SDHCI at 0xc8209000 irq 18 DMA
[ 19.040593] sdhci:slot1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 19.040625] mmc1: SDHCI at 0xc8208c00 irq 18 DMA
[ 19.040638] sdhci:slot2: Will use DMA mode even though HW doesn't fully claim to support it.
[ 19.040666] mmc2: SDHCI at 0xc8208800 irq 18 DMA
[ 19.040784] ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 17 (level, low) -> IRQ 17
[ 19.040797] PCI: Setting latency timer of device 0000:00:1e.2 to 64
[ 19.153870] intel8x0_measure_ac97_clock: measured 55356 usecs
[ 19.153874] intel8x0: clocking to 48000
[ 19.248581] lp: driver loaded but no devices found
[ 19.421055] Adding 2803332k swap on /dev/sda4. Priority:-1 extents:1 across:2803332k
[ 19.490748] EXT3 FS on sda5, internal journal
[ 24.277019] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 24.429848] PPP generic driver version 2.4.2
[ 24.467869] NET: Registered protocol family 10
[ 24.468071] lo: Disabled Privacy Extensions
[ 24.662186] No dock devices found.
[ 25.370090] ppdev: user-space parallel port driver
[ 25.389059] audit(1235822628.923:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5307 profile="/usr/sbin/cupsd" namespace="default"
[ 25.418963] apm: BIOS not found.
[ 55.196193] Marking TSC unstable due to: cpufreq changes.
[ 56.173627] eth0: link down
[ 56.177020] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 56.207274] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 42.321784] Bluetooth: Core ver 2.11
[ 42.322437] NET: Registered protocol family 31
[ 42.322441] Bluetooth: HCI device and connection manager initialized
[ 42.322447] Bluetooth: HCI socket layer initialized
[ 26.105464] Bluetooth: L2CAP ver 2.9
[ 26.105468] Bluetooth: L2CAP socket layer initialized
[ 26.182340] Bluetooth: RFCOMM socket layer initialized
[ 26.182353] Bluetooth: RFCOMM TTY layer initialized
[ 26.182355] Bluetooth: RFCOMM ver 1.8
[ 26.535373] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 46.368764] [fglrx] Reserve Block - 0 offset = 0X7ffb000 length = 0X5000
[ 46.368773] [fglrx] Reserve Block - 1 offset = 0X0 length = 0X40000
[ 46.368777] [fglrx] Reserve Block - 2 offset = 0X7fbb000 length = 0X40000
[ 46.484893] [fglrx] interrupt source 20008000 successfully enabled
[ 46.484902] [fglrx] enable ID = 0x00000004
[ 46.485344] [fglrx] Receive enable interrupt message with irqEnableMask: 20008000
[ 46.485643] [fglrx] interrupt source 10000000 successfully enabled
[ 46.485649] [fglrx] enable ID = 0x00000005
[ 46.485986] [fglrx] Receive enable interrupt message with irqEnableMask: 10000000
[ 48.367912] ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 20 (level, low) -> IRQ 19
[ 48.367933] PCI: Setting latency timer of device 0000:00:1e.3 to 64
Module Size Used by
snd_intel8x0m 18956 0
binfmt_misc 12808 1
rfcomm 41744 2
l2cap 25728 13 rfcomm
bluetooth 61156 4 rfcomm,l2cap
ppdev 10372 0
speedstep_centrino 9152 0
cpufreq_stats 7104 0
cpufreq_conservative 8712 0
cpufreq_powersave 2688 0
cpufreq_userspace 5284 0
cpufreq_ondemand 9740 1
freq_table 5536 3 speedstep_centrino,cpufreq_stats,cpufreq_ondemand
container 5632 0
sbs 15112 0
sbshc 7680 1 sbs
dock 11280 0
ipv6 267780 10
ppp_generic 29588 0
slhc 7040 1 ppp_generic
iptable_filter 3840 0
ip_tables 14820 1 iptable_filter
x_tables 16132 1 ip_tables
nls_iso8859_1 4992 1
nls_cp437 6656 1
vfat 14464 1
fat 54556 1 vfat
sbp2 24072 0
parport_pc 36260 0
lp 12324 0
parport 37832 3 ppdev,parport_pc,lp
joydev 13120 0
pcmcia 40876 0
snd_intel8x0 35356 3
snd_ac97_codec 101028 2 snd_intel8x0m,snd_intel8x0
ac97_bus 3072 1 snd_ac97_codec
snd_pcm_oss 42144 0
snd_mixer_oss 17920 1 snd_pcm_oss
snd_pcm 78596 4 snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss
battery 14212 0
ac 6916 0
snd_seq_dummy 4868 0
fglrx 1555468 20
snd_seq_oss 35584 0
snd_seq_midi 9376 0
serio_raw 7940 0
snd_rawmidi 25760 1 snd_seq_midi
snd_seq_midi_event 8320 2 snd_seq_oss,snd_seq_midi
sdhci 19076 0
snd_seq 54224 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
video 19856 0
output 4736 1 video
tifm_7xx1 8576 0
ipw2200 146120 0
psmouse 40336 0
snd_timer 24836 2 snd_pcm,snd_seq
snd_seq_device 9612 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
mmc_core 51460 1 sdhci
tifm_core 11012 1 tifm_7xx1
ieee80211 35528 1 ipw2200
ieee80211_crypt 7040 1 ieee80211
yenta_socket 27276 1
rsrc_nonstatic 13696 1 yenta_socket
pcmcia_core 40596 3 pcmcia,yenta_socket,rsrc_nonstatic
wmi_acer 9644 0
button 9232 0
snd 56996 18 snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_dummy,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 8800 1 snd
intel_agp 25492 0
pcspkr 4224 0
evdev 13056 7
shpchp 34452 0
pci_hotplug 30880 1 shpchp
iTCO_wdt 13092 0
iTCO_vendor_support 4868 1 iTCO_wdt
snd_page_alloc 11400 3 snd_intel8x0m,snd_intel8x0,snd_pcm
agpgart 34760 2 fglrx,intel_agp
ext3 136840 1
jbd 48404 1 ext3
mbcache 9600 1 ext3
sg 36880 0
sr_mod 17956 0
cdrom 37408 1 sr_mod
sd_mod 30720 5
ata_generic 8324 0
pata_acpi 8320 0
8139too 27520 0
ata_piix 19588 4
libata 159344 3 ata_generic,pata_acpi,ata_piix
scsi_mod 151436 5 sbp2,sg,sr_mod,sd_mod,libata
8139cp 24704 0
mii 6400 2 8139too,8139cp
ohci1394 33584 0
ieee1394 93752 2 sbp2,ohci1394
ehci_hcd 37900 0
uhci_hcd 27024 0
usbcore 146412 3 ehci_hcd,uhci_hcd
thermal 16796 0
processor 37384 2 thermal
fan 5636 0
fbcon 42912 0
tileblit 3456 1 fbcon
font 9472 1 fbcon
bitblit 6784 1 fbcon
softcursor 3072 1 bitblit
fuse 50708 3
