Reid, We cannot help with gnome-ppp issues, as its reportage from its front end wvdial is incomplkete If you want our help, Send us the outputs from the more informative wvdial usage, including the /etc/wvdial.conf . Just replace youre PASSWORD. MarvS On Sun, Feb 22, 2009 at 10:55 AM, Reid Sheeley <edrms@xxxxxxxxxxxxx> wrote: > attempting dialup connection with earthlink, new usb modem kernal 2.6.27-7 > ubuntu > > > > Gnome-ppp setup tried PAP and CHAP. did not try chat script. modem detected > but with following tty, modem on com4 (windows). Do I need a chat script or > ether to usb cable? modem is conexant series 1063, model 3095, 08-15356. > Have contacted linuxant but no reply yet. Gnome-ppp dialog box... sending > password hangs, log states modem ok until last line 'type password (or leave > empty to stop)'. Does this mean that the password is in fact not being sent? > ISP (as checked with house phone) is not being dialed into on phone line. > > > > Wvdialconf /etc/wvdial.conf read out: > > > > Scanning your serial ports for a modem. > > > ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud > > ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud > > ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. > > ttyS1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud > > ttyS1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud > > ttyS1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. > > Modem Port Scan<*1>: S2 S3 > > WvModem<*1>: Cannot get information for serial port. > > ttyACM0<*1>: ATQ0 V1 E1 -- OK > > ttyACM0<*1>: ATQ0 V1 E1 Z -- OK > > ttyACM0<*1>: ATQ0 V1 E1 S0=0 -- OK > > ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK > > ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK > > ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK > > ttyACM0<*1>: Modem Identifier: ATI -- 56000 > > ttyACM0<*1>: Speed 4800: AT -- OK > > ttyACM0<*1>: Speed 9600: AT -- OK > > ttyACM0<*1>: Speed 19200: AT -- OK > > ttyACM0<*1>: Speed 38400: AT -- OK > > ttyACM0<*1>: Speed 57600: AT -- OK > > ttyACM0<*1>: Speed 115200: AT -- OK > > ttyACM0<*1>: Speed 230400: AT -- OK > > ttyACM0<*1>: Speed 460800: AT -- OK > > ttyACM0<*1>: Max speed is 460800; that should be safe. > > ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK > > > > Found an USB modem on /dev/ttyACM0. > Modem configuration written to /etc/wvdial.conf. > > ttyACM0<Info>: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0" > > > > thank you for all and any help, Reid > > >
