Mahdy At At http://linmodems.technion.ac.il/packages/ltmodem/kernel-2.6/martian/ you need the most recent martian-full package Before compiling you must additionally install packages linux-libc-dev and libc6-dev package. They may be on your install CD, or if not can be downloaded through http://packages.ubuntu.com. After downloaded and copied to your Ubuntu partition, install then with: $ sudo dpkg -i li*.deb Then you will be readly to use the martian-full package, which can be unpacked with $ tar zxf martian*.tar.gz However, there is a preliminary problem in ===== Modem interrupt assignment and sharing: 11: 0 IO-APIC-fasteoi ehci_hcd:usb1, uhci_hcd:usb3 --- Bootup diagnostics for card in PCI slot 00:0b.0 ---- [ 0.752594] PCI: 0000:00:0b.0 reg 10 32bit mmio: [dfffff00, dfffffff] [ 0.752605] PCI: 0000:00:0b.0 reg 14 io port: [ec00, ec07] [ 0.752615] PCI: 0000:00:0b.0 reg 18 io port: [e800, e8ff] [ 0.752658] pci 0000:00:0b.0: supports D2 [ 0.752662] pci 0000:00:0b.0: PME# supported from D2 D3hot D3cold [ 0.752670] pci 0000:00:0b.0: PME# disabled The PCI slot 00:0b.0 of the modem card may be disabled early in a bootup process, but then enabled later. If modem drivers load but the modem is not responsive, read DOCs/Bootup.txt about possible fixes. Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx if help is needed. ====== The pci 0000:00:0b.0 must be enabled before Communication controller: Agere Systems LT WinModem " CLASS=0780 PCIDEV=11c1:044c SUBSYS=11c1:044c IRQ=11 IDENT=Agere.DSP ===== can function under Ubuntu 2.6.27-7-generic. Whoever after installing the drivers, try a reboot and rerun scanModem. Sometimes installing the driver helps. Report back presently. MarvS scanModem maintainer On Tue, Feb 17, 2009 at 12:19 PM, mahdy mrn <mrmrn121@xxxxxxxxx> wrote: > >
